Subversion Repositories or1k_old

/*

 * linux/mtio.h header file for Linux. Written by H. Bergman

 */

#ifndef _LINUX_MTIO_H

#define _LINUX_MTIO_H

#include <linux/ioctl.h>

/*

 * Structures and definitions for mag tape io control commands

 */

/* structure for MTIOCTOP - mag tape op command */

struct  mtop {

        short   mt_op;          /* operations defined below */

        int     mt_count;       /* how many of them */

};

/* Magnetic Tape operations [Not all operations supported by all drivers]: */

#define MTRESET 0       /* +reset drive in case of problems */

#define MTFSF   1       /* forward space over FileMark,

                         * position at first record of next file

                         */

#define MTBSF   2       /* backward space FileMark (position before FM) */

#define MTFSR   3       /* forward space record */

#define MTBSR   4       /* backward space record */

#define MTWEOF  5       /* write an end-of-file record (mark) */

#define MTREW   6       /* rewind */

#define MTOFFL  7       /* rewind and put the drive offline (eject?) */

#define MTNOP   8       /* no op, set status only (read with MTIOCGET) */

#define MTRETEN 9       /* retension tape */

#define MTBSFM  10      /* +backward space FileMark, position at FM */

#define MTFSFM  11      /* +forward space FileMark, position at FM */

#define MTEOM   12      /* goto end of recorded media (for appending files).

                         * MTEOM positions after the last FM, ready for

                         * appending another file.

                         */

#define MTERASE 13      /* erase tape -- be careful! */

#define MTRAS1  14      /* run self test 1 (nondestructive) */

#define MTRAS2  15      /* run self test 2 (destructive) */

#define MTRAS3  16      /* reserved for self test 3 */

#define MTSETBLK 20     /* set block length (SCSI) */

#define MTSETDENSITY 21 /* set tape density (SCSI) */

#define MTSEEK  22      /* seek to block (Tandberg, etc.) */

#define MTTELL  23      /* tell block (Tandberg, etc.) */

#define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */

                        /* ordinary buffered operation with code 1 */

#define MTFSS   25      /* space forward over setmarks */

#define MTBSS   26      /* space backward over setmarks */

#define MTWSM   27      /* write setmarks */

#define MTLOCK  28      /* lock the drive door */

#define MTUNLOCK 29     /* unlock the drive door */

#define MTLOAD  30      /* execute the SCSI load command */

#define MTUNLOAD 31     /* execute the SCSI unload command */

#define MTCOMPRESSION 32/* control compression with SCSI mode page 15 */

#define MTSETPART 33    /* Change the active tape partition */

#define MTMKPART  34    /* Format the tape with one or two partitions */

/* structure for MTIOCGET - mag tape get status command */

struct  mtget {

        long    mt_type;        /* type of magtape device */

        long    mt_resid;       /* residual count: (not sure)

                                 *      number of bytes ignored, or

                                 *      number of files not skipped, or

                                 *      number of records not skipped.

                                 */

        /* the following registers are device dependent */

        long    mt_dsreg;       /* status register */

        long    mt_gstat;       /* generic (device independent) status */

        long    mt_erreg;       /* error register */

        /* The next two fields are not always used */

        __kernel_daddr_t mt_fileno;     /* number of current file on tape */

        __kernel_daddr_t mt_blkno;      /* current block number */

};

/*

 * Constants for mt_type. Not all of these are supported,

 * and these are not all of the ones that are supported.

 */

#define MT_ISUNKNOWN            0x01

#define MT_ISQIC02              0x02    /* Generic QIC-02 tape streamer */

#define MT_ISWT5150             0x03    /* Wangtek 5150EQ, QIC-150, QIC-02 */

#define MT_ISARCHIVE_5945L2     0x04    /* Archive 5945L-2, QIC-24, QIC-02? */

#define MT_ISCMSJ500            0x05    /* CMS Jumbo 500 (QIC-02?) */

#define MT_ISTDC3610            0x06    /* Tandberg 6310, QIC-24 */

#define MT_ISARCHIVE_VP60I      0x07    /* Archive VP60i, QIC-02 */

#define MT_ISARCHIVE_2150L      0x08    /* Archive Viper 2150L */

#define MT_ISARCHIVE_2060L      0x09    /* Archive Viper 2060L */

#define MT_ISARCHIVESC499       0x0A    /* Archive SC-499 QIC-36 controller */

#define MT_ISQIC02_ALL_FEATURES 0x0F    /* Generic QIC-02 with all features */

#define MT_ISWT5099EEN24        0x11    /* Wangtek 5099-een24, 60MB, QIC-24 */

#define MT_ISTEAC_MT2ST         0x12    /* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */

#define MT_ISEVEREX_FT40A       0x32    /* Everex FT40A (QIC-40) */

#define MT_ISDDS1               0x51    /* DDS device without partitions */

#define MT_ISDDS2               0x52    /* DDS device with partitions */

#define MT_ISSCSI1              0x71    /* Generic ANSI SCSI-1 tape unit */

#define MT_ISSCSI2              0x72    /* Generic ANSI SCSI-2 tape unit */

/* QIC-40/80/3010/3020 ftape supported drives.

 * 20bit vendor ID + 0x800000 (see vendors.h in ftape distribution)

 */

#define MT_ISFTAPE_UNKNOWN      0x800000 /* obsolete */

#define MT_ISFTAPE_FLAG 0x800000

struct mt_tape_info {

        long t_type;            /* device type id (mt_type) */

        char *t_name;           /* descriptive name */

};

#define MT_TAPE_INFO    { \

        {MT_ISUNKNOWN,          "Unknown type of tape device"}, \

        {MT_ISQIC02,            "Generic QIC-02 tape streamer"}, \

        {MT_ISWT5150,           "Wangtek 5150, QIC-150"}, \

        {MT_ISARCHIVE_5945L2,   "Archive 5945L-2"}, \

        {MT_ISCMSJ500,          "CMS Jumbo 500"}, \

        {MT_ISTDC3610,          "Tandberg TDC 3610, QIC-24"}, \

        {MT_ISARCHIVE_VP60I,    "Archive VP60i, QIC-02"}, \

        {MT_ISARCHIVE_2150L,    "Archive Viper 2150L"}, \

        {MT_ISARCHIVE_2060L,    "Archive Viper 2060L"}, \

        {MT_ISARCHIVESC499,     "Archive SC-499 QIC-36 controller"}, \

        {MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \

        {MT_ISWT5099EEN24,      "Wangtek 5099-een24, 60MB"}, \

        {MT_ISTEAC_MT2ST,       "Teac MT-2ST 155mb data cassette drive"}, \

        {MT_ISEVEREX_FT40A,     "Everex FT40A, QIC-40"}, \

        {MT_ISSCSI1,            "Generic SCSI-1 tape"}, \

        {MT_ISSCSI2,            "Generic SCSI-2 tape"}, \

        {0, NULL} \

}

/* structure for MTIOCPOS - mag tape get position command */

struct  mtpos {

        long    mt_blkno;       /* current block number */

};

/* structure for MTIOCGETCONFIG/MTIOCSETCONFIG primarily intended

 * as an interim solution for QIC-02 until DDI is fully implemented.

 */

struct mtconfiginfo {

        long    mt_type;        /* drive type */

        long    ifc_type;       /* interface card type */

        unsigned short  irqnr;  /* IRQ number to use */

        unsigned short  dmanr;  /* DMA channel to use */

        unsigned short  port;   /* IO port base address */

        unsigned long   debug;  /* debugging flags */

        unsigned        have_dens:1;

        unsigned        have_bsf:1;

        unsigned        have_fsr:1;

        unsigned        have_bsr:1;

        unsigned        have_eod:1;

        unsigned        have_seek:1;

        unsigned        have_tell:1;

        unsigned        have_ras1:1;

        unsigned        have_ras2:1;

        unsigned        have_ras3:1;

        unsigned        have_qfa:1;

        unsigned        pad1:5;

        char            reserved[10];

};

/* mag tape io control commands */

#define MTIOCTOP        _IOW('m', 1, struct mtop)       /* do a mag tape op */

#define MTIOCGET        _IOR('m', 2, struct mtget)      /* get tape status */

#define MTIOCPOS        _IOR('m', 3, struct mtpos)      /* get tape position */

/* The next two are used by the QIC-02 driver for runtime reconfiguration.

 * See tpqic02.h for struct mtconfiginfo.

 */

#define MTIOCGETCONFIG  _IOR('m', 4, struct mtconfiginfo) /* get tape config */

#define MTIOCSETCONFIG  _IOW('m', 5, struct mtconfiginfo) /* set tape config */

/* Generic Mag Tape (device independent) status macros for examining

 * mt_gstat -- HP-UX compatible.

 * There is room for more generic status bits here, but I don't

 * know which of them are reserved. At least three or so should

 * be added to make this really useful.

 */

#define GMT_EOF(x)              ((x) & 0x80000000)

#define GMT_BOT(x)              ((x) & 0x40000000)

#define GMT_EOT(x)              ((x) & 0x20000000)

#define GMT_SM(x)               ((x) & 0x10000000)  /* DDS setmark */

#define GMT_EOD(x)              ((x) & 0x08000000)  /* DDS EOD */

#define GMT_WR_PROT(x)          ((x) & 0x04000000)

/* #define GMT_ ?               ((x) & 0x02000000) */

#define GMT_ONLINE(x)           ((x) & 0x01000000)

#define GMT_D_6250(x)           ((x) & 0x00800000)

#define GMT_D_1600(x)           ((x) & 0x00400000)

#define GMT_D_800(x)            ((x) & 0x00200000)

/* #define GMT_ ?               ((x) & 0x00100000) */

/* #define GMT_ ?               ((x) & 0x00080000) */

#define GMT_DR_OPEN(x)          ((x) & 0x00040000)  /* door open (no tape) */

/* #define GMT_ ?               ((x) & 0x00020000) */

#define GMT_IM_REP_EN(x)        ((x) & 0x00010000)  /* immediate report mode */

/* 16 generic status bits unused */

/* SCSI-tape specific definitions */

/* Bitfield shifts in the status  */

#define MT_ST_BLKSIZE_SHIFT     0

#define MT_ST_BLKSIZE_MASK      0xffffff

#define MT_ST_DENSITY_SHIFT     24

#define MT_ST_DENSITY_MASK      0xff000000

#define MT_ST_SOFTERR_SHIFT     0

#define MT_ST_SOFTERR_MASK      0xffff

/* Bitfields for the MTSETDRVBUFFER ioctl */

#define MT_ST_OPTIONS           0xf0000000

#define MT_ST_BOOLEANS          0x10000000

#define MT_ST_SETBOOLEANS       0x30000000

#define MT_ST_CLEARBOOLEANS     0x40000000

#define MT_ST_WRITE_THRESHOLD   0x20000000

#define MT_ST_DEF_BLKSIZE       0x50000000

#define MT_ST_DEF_OPTIONS       0x60000000

#define MT_ST_BUFFER_WRITES     0x1

#define MT_ST_ASYNC_WRITES      0x2

#define MT_ST_READ_AHEAD        0x4

#define MT_ST_DEBUGGING         0x8

#define MT_ST_TWO_FM            0x10

#define MT_ST_FAST_MTEOM        0x20

#define MT_ST_AUTO_LOCK         0x40

#define MT_ST_DEF_WRITES        0x80

#define MT_ST_CAN_BSR           0x100

#define MT_ST_NO_BLKLIMS        0x200

#define MT_ST_CAN_PARTITIONS    0x400

#define MT_ST_SCSI2LOGICAL      0x800

/* The mode parameters to be controlled. Parameter chosen with bits 20-28 */

#define MT_ST_CLEAR_DEFAULT     0xfffff

#define MT_ST_DEF_DENSITY       (MT_ST_DEF_OPTIONS | 0x100000)

#define MT_ST_DEF_COMPRESSION   (MT_ST_DEF_OPTIONS | 0x200000)

#define MT_ST_DEF_DRVBUFFER     (MT_ST_DEF_OPTIONS | 0x300000)

#endif /* _LINUX_MTIO_H */