Subversion Repositories or1k_old

/*

 * sbpcd.h   Specify interface address and interface type here.

 */

/*

 * Attention! This file contains user-serviceable parts!

 * I recommend to make use of it...

 * If you feel helpless, look into linux/Documentation/cdrom/sbpcd

 * (good idea anyway, at least before mailing me).

 *

 * The definitions for the first controller can get overridden by

 * the kernel command line ("lilo boot option").

 * Examples:

 *                                 sbpcd=0x300,LaserMate

 *                             or

 *                                 sbpcd=0x230,SoundBlaster

 *                             or

 *                                 sbpcd=0x338,SoundScape

 *                             or

 *                                 sbpcd=0x2C0,Teac16bit

 *

 * If sbpcd gets used as a module, you can load it with

 *     insmod sbpcd.o sbpcd=0x300,0

 * or

 *     insmod sbpcd.o sbpcd=0x230,1

 * or

 *     insmod sbpcd.o sbpcd=0x338,2

 * or

 *     insmod sbpcd.o sbpcd=0x2C0,3

 * respective to override the configured address and type.

 */

/*

 * define your CDROM port base address as CDROM_PORT

 * and specify the type of your interface card as SBPRO.

 *

 * address:

 * ========

 * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...

 * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ...

 * SOUNDSCAPE addresses are from the LASERMATE type and range. You have to

 * specify the REAL address here, not the configuration port address. Look

 * at the CDROM driver's invoking line within your DOS CONFIG.SYS, or let

 * sbpcd auto-probe, if you are not firm with the address.

 * There are some soundcards on the market with 0x0630, 0x0650, ...; their

 * type is not obvious (both types are possible).

 *

 * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1.

 *          if your soundcard has its CDROM port above 0x300, specify

 *          that address and try SBPRO 0 first.

 *          if your SoundScape configuration port is at 0x330, specify

 *          0x338 and SBPRO 2.

 *

 * interface type:

 * ===============

 * set SBPRO to 1 for "true" SoundBlaster card

 * set SBPRO to 0 for "compatible" soundcards and

 *                for "poor" (no sound) interface cards.

 * set SBPRO to 2 for Ensonic SoundScape or SPEA Media FX cards

 * set SBPRO to 3 for Teac 16bit interface cards

 *

 * Almost all "compatible" sound boards need to set SBPRO to 0.

 * If SBPRO is set wrong, the drives will get found - but any

 * data access will give errors (audio access will work).

 * The "OmniCD" no-sound interface card from CreativeLabs and most Teac

 * interface cards need SBPRO 1.

 *

 * sound base:

 * ===========

 * The SOUND_BASE definition tells if we should try to turn the CD sound

 * channels on. It will only be of use regarding soundcards with a SbPro

 * compatible mixer.

 *

 * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels

 *          #define SOUND_BASE 0     leaves the soundcard untouched

 */

#if !(SBPCD_ISSUE-1)     /* first (or if you have only one) interface board: */

#define CDROM_PORT 0x340 /* <-----------<< port address                      */

#define SBPRO      0     /* <-----------<< interface type                    */

#define MAX_DRIVES 4     /* set to 1 if the card does not use "drive select" */

#define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0   */

#endif

#if !(SBPCD_ISSUE-2)     /* ==================== second interface board: === */

#define CDROM_PORT 0x344 /* <-----------<< port address                      */

#define SBPRO      0     /* <-----------<< interface type                    */

#define MAX_DRIVES 4     /* set to 1 if the card does not use "drive select" */

#define SOUND_BASE 0x000 /* <-----------<< sound address of this card or 0   */

#endif

#if !(SBPCD_ISSUE-3)     /* ===================== third interface board: === */

#define CDROM_PORT 0x630 /* <-----------<< port address                      */

#define SBPRO      1     /* <-----------<< interface type                    */

#define MAX_DRIVES 4     /* set to 1 if the card does not use "drive select" */

#define SOUND_BASE 0x240 /* <-----------<< sound address of this card or 0   */

#endif

#if !(SBPCD_ISSUE-4)     /* ==================== fourth interface board: === */

#define CDROM_PORT 0x634 /* <-----------<< port address                      */

#define SBPRO      0     /* <-----------<< interface type                    */

#define MAX_DRIVES 4     /* set to 1 if the card does not use "drive select" */

#define SOUND_BASE 0x000 /* <-----------<< sound address of this card or 0   */

#endif

/*

 * some more or less user dependent definitions - service them!

 */

/* Set this to 0 once you have configured your interface definitions right. */

#define DISTRIBUTION 1

/*

 * Time to wait after giving a message.

 * This gets important if you enable non-standard DBG_xxx flags.

 * You will see what happens if you omit the pause or make it

 * too short. Be warned!

 */

#define KLOGD_PAUSE 1

/* tray control: eject tray if no disk is in */

#if DISTRIBUTION

#define JUKEBOX 0

#else

#define JUKEBOX 1

#endif DISTRIBUTION

/* tray control: eject tray after last use */

#if DISTRIBUTION

#define EJECT 0

#else

#define EJECT 1

#endif DISTRIBUTION

/* max. number of audio frames to read with one     */

/* request (allocates n* 2352 bytes kernel memory!) */

/* may be freely adjusted, f.e. 75 (= 1 sec.), at   */

/* runtime by use of the CDROMAUDIOBUFSIZ ioctl.    */

#define READ_AUDIO 0

/* Optimizations for the Teac CD-55A drive read performance.

 * SBP_TEAC_SPEED can be changed here, or one can set the

 * variable "teac" when loading as a module.

 * Valid settings are:

 *   0 - very slow - the recommended "DISTRIBUTION 1" setup.

 *   1 - 2x performance with little overhead. No busy waiting.

 *   2 - 4x performance with 5ms overhead per read. Busy wait.

 *

 * Setting SBP_TEAC_SPEED or the variable 'teac' to anything

 * other than 0 may cause problems. If you run into them, first

 * change SBP_TEAC_SPEED back to 0 and see if your drive responds

 * normally. If yes, you are "allowed" to report your case - to help

 * me with the driver, not to solve your hassle. Don´t mail if you

 * simply are stuck into your own "tuning" experiments, you know?

 */

#define SBP_TEAC_SPEED 1

/*==========================================================================*/

/*==========================================================================*/

/*

 * nothing to change below here if you are not fully aware what you're doing

 */

#ifndef _LINUX_SBPCD_H

#define _LINUX_SBPCD_H

/*==========================================================================*/

/*==========================================================================*/

/*

 * driver's own read_ahead, data mode

 */

#define SBP_BUFFER_FRAMES 8 

#define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */

#undef  FUTURE

#undef SAFE_MIXED

#define TEST_UPC 0

#define SPEA_TEST 0

#define TEST_STI 0

#define OLD_BUSY 0

#undef PATH_CHECK

#ifndef SOUND_BASE

#define SOUND_BASE 0

#endif

#if DISTRIBUTION

#undef SBP_TEAC_SPEED

#define SBP_TEAC_SPEED 0

#endif

/*==========================================================================*/

/*

 * DDI interface definitions

 * "invented" by Fred N. van Kempen..

 */

#define DDIOCSDBG       0x9000

/*==========================================================================*/

/*

 * "private" IOCTL functions

 */

#define CDROMAUDIOBUFSIZ        0x5382 /* set the audio buffer size */

/*==========================================================================*/

/*

 * Debug output levels

 */

#define DBG_INF 1       /* necessary information */

#define DBG_BSZ 2       /* BLOCK_SIZE trace */

#define DBG_REA 3       /* READ status trace */

#define DBG_CHK 4       /* MEDIA CHECK trace */

#define DBG_TIM 5       /* datarate timer test */

#define DBG_INI 6       /* initialization trace */

#define DBG_TOC 7       /* tell TocEntry values */

#define DBG_IOC 8       /* ioctl trace */

#define DBG_STA 9       /* ResponseStatus() trace */

#define DBG_ERR 10      /* cc_ReadError() trace */

#define DBG_CMD 11      /* cmd_out() trace */

#define DBG_WRN 12      /* give explanation before auto-probing */

#define DBG_MUL 13      /* multi session code test */

#define DBG_IDX 14      /* test code for drive_id !=0 */

#define DBG_IOX 15      /* some special information */

#define DBG_DID 16      /* drive ID test */

#define DBG_RES 17      /* drive reset info */

#define DBG_SPI 18      /* SpinUp test */

#define DBG_IOS 19      /* ioctl trace: subchannel functions */

#define DBG_IO2 20      /* ioctl trace: general */

#define DBG_UPC 21      /* show UPC information */

#define DBG_XA1 22      /* XA mode debugging */

#define DBG_LCK 23      /* door (un)lock info */

#define DBG_SQ1 24      /* dump SubQ frame */

#define DBG_AUD 25      /* READ AUDIO debugging */

#define DBG_SEQ 26      /* Sequoia interface configuration trace */

#define DBG_LCS 27      /* Longshine LCS-7260 debugging trace */

#define DBG_CD2 28      /* MKE/Funai CD200 debugging trace */

#define DBG_TEA 29      /* TEAC CD-55A debugging trace */

#define DBG_ECS 30      /* ECS-AT (Vertos 100) debugging trace */

#define DBG_000 31      /* unnecessary information */

/*==========================================================================*/

/*==========================================================================*/

/*

 * bits of flags_cmd_out:

 */

#define f_respo3                0x100

#define f_putcmd                0x80

#define f_respo2                0x40

#define f_lopsta                0x20

#define f_getsta                0x10

#define f_ResponseStatus        0x08

#define f_obey_p_check          0x04

#define f_bit1                  0x02

#define f_wait_if_busy          0x01

/*

 * diskstate_flags:

 */

#define x80_bit                 0x80

#define upc_bit                 0x40

#define volume_bit              0x20

#define toc_bit                 0x10

#define multisession_bit        0x08

#define cd_size_bit             0x04

#define subq_bit                0x02

#define frame_size_bit          0x01

/*

 * disk states (bits of diskstate_flags):

 */

#define upc_valid               (D_S[d].diskstate_flags&upc_bit)

#define volume_valid            (D_S[d].diskstate_flags&volume_bit)

#define toc_valid               (D_S[d].diskstate_flags&toc_bit)

#define cd_size_valid           (D_S[d].diskstate_flags&cd_size_bit)

#define subq_valid              (D_S[d].diskstate_flags&subq_bit)

#define frame_size_valid        (D_S[d].diskstate_flags&frame_size_bit)

/*

 * the status_bits variable

 */

#define p_success       0x100

#define p_door_closed   0x80

#define p_caddy_in      0x40

#define p_spinning      0x20

#define p_check         0x10

#define p_busy_new      0x08

#define p_door_locked   0x04

#define p_disk_ok       0x01

/*

 * LCS-7260 special status result bits:

 */

#define p_lcs_door_locked       0x02

#define p_lcs_door_closed       0x01 /* probably disk_in */

/*

 * CR-52x special status result bits:

 */

#define p_caddin_old    0x40

#define p_success_old   0x08

#define p_busy_old      0x04

#define p_bit_1         0x02    /* hopefully unused now */

/*

 * "generation specific" defs of the status result bits:

 */

#define p0_door_closed  0x80

#define p0_caddy_in     0x40

#define p0_spinning     0x20

#define p0_check        0x10

#define p0_success      0x08 /* unused */

#define p0_busy         0x04

#define p0_bit_1        0x02 /* unused */

#define p0_disk_ok      0x01

#define pL_disk_in      0x40

#define pL_spinning     0x20

#define pL_check        0x10

#define pL_success      0x08 /* unused ?? */

#define pL_busy         0x04

#define pL_door_locked  0x02

#define pL_door_closed  0x01

#define pV_door_closed  0x40

#define pV_spinning     0x20

#define pV_check        0x10

#define pV_success      0x08

#define pV_busy         0x04

#define pV_door_locked  0x02

#define pV_disk_ok      0x01

#define p1_door_closed  0x80

#define p1_disk_in      0x40

#define p1_spinning     0x20

#define p1_check        0x10

#define p1_busy         0x08

#define p1_door_locked  0x04

#define p1_bit_1        0x02 /* unused */

#define p1_disk_ok      0x01

#define p2_disk_ok      0x80

#define p2_door_locked  0x40

#define p2_spinning     0x20

#define p2_busy2        0x10

#define p2_busy1        0x08

#define p2_door_closed  0x04

#define p2_disk_in      0x02

#define p2_check        0x01

/*

 * used drive states:

 */

#define st_door_closed  (D_S[d].status_bits&p_door_closed)

#define st_caddy_in     (D_S[d].status_bits&p_caddy_in)

#define st_spinning     (D_S[d].status_bits&p_spinning)

#define st_check        (D_S[d].status_bits&p_check)

#define st_busy         (D_S[d].status_bits&p_busy_new)

#define st_door_locked  (D_S[d].status_bits&p_door_locked)

#define st_diskok       (D_S[d].status_bits&p_disk_ok)

/*

 * bits of the CDi_status register:

 */

#define s_not_result_ready      0x04 /* 0: "result ready" */

#define s_not_data_ready        0x02 /* 0: "data ready"   */

#define s_attention             0x01 /* 1: "attention required" */

/*

 * usable as:

 */

#define DRV_ATTN        ((inb(CDi_status)&s_attention)!=0)

#define DATA_READY      ((inb(CDi_status)&s_not_data_ready)==0)

#define RESULT_READY    ((inb(CDi_status)&s_not_result_ready)==0)

/*

 * drive families and types (firmware versions):

 */

#define drv_fam0        0x0100          /* CR-52x family */

#define drv_199         (drv_fam0+0x01) /* <200 */

#define drv_200         (drv_fam0+0x02) /* <201 */

#define drv_201         (drv_fam0+0x03) /* <210 */

#define drv_210         (drv_fam0+0x04) /* <211 */

#define drv_211         (drv_fam0+0x05) /* <300 */

#define drv_300         (drv_fam0+0x06) /* >=300 */

#define drv_fam1        0x0200          /* CR-56x family */

#define drv_099         (drv_fam1+0x01) /* <100 */

#define drv_100         (drv_fam1+0x02) /* >=100, only 1.02 and 5.00 known */

#define drv_fam2        0x0400          /* CD200 family */

#define drv_famT        0x0800          /* TEAC CD-55A */

#define drv_famL        0x1000          /* Longshine family */

#define drv_260         (drv_famL+0x01) /* LCS-7260 */

#define drv_e1          (drv_famL+0x01) /* LCS-7260, firmware "A E1" */

#define drv_f4          (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */

#define drv_famV        0x2000          /* ECS-AT (vertos-100) family */

#define drv_at          (drv_famV+0x01) /* ECS-AT, firmware "1.00" */

#define fam0_drive      (D_S[d].drv_type&drv_fam0)

#define famL_drive      (D_S[d].drv_type&drv_famL)

#define famV_drive      (D_S[d].drv_type&drv_famV)

#define fam1_drive      (D_S[d].drv_type&drv_fam1)

#define fam2_drive      (D_S[d].drv_type&drv_fam2)

#define famT_drive      (D_S[d].drv_type&drv_famT)

#define fam0L_drive     (D_S[d].drv_type&(drv_fam0|drv_famL))

#define fam0V_drive     (D_S[d].drv_type&(drv_fam0|drv_famV))

#define famLV_drive     (D_S[d].drv_type&(drv_famL|drv_famV))

#define fam0LV_drive    (D_S[d].drv_type&(drv_fam0|drv_famL|drv_famV))

#define fam1L_drive     (D_S[d].drv_type&(drv_fam1|drv_famL))

#define fam1V_drive     (D_S[d].drv_type&(drv_fam1|drv_famV))

#define fam1LV_drive    (D_S[d].drv_type&(drv_fam1|drv_famL|drv_famV))

#define fam01_drive     (D_S[d].drv_type&(drv_fam0|drv_fam1))

#define fam12_drive     (D_S[d].drv_type&(drv_fam1|drv_fam2))

#define fam2T_drive     (D_S[d].drv_type&(drv_fam2|drv_famT))

/*

 * audio states:

 */

#define audio_playing   2

#define audio_pausing   1

/*

 * drv_pattern, drv_options:

 */

#define speed_auto      0x80

#define speed_300       0x40

#define speed_150       0x20

#define audio_mono      0x04

/*

 * values of cmd_type (0 else):

 */

#define READ_M1 0x01    /* "data mode 1": 2048 bytes per frame */

#define READ_M2 0x02    /* "data mode 2": 12+2048+280 bytes per frame */

#define READ_SC 0x04    /* "subchannel info": 96 bytes per frame */

#define READ_AU 0x08    /* "audio frame": 2352 bytes per frame */

/*

 * sense_byte:

 *

 *          values: 00

 *                  01

 *                  81

 *                  82 "raw audio" mode

 *                  xx from infobuf[0] after 85 00 00 00 00 00 00

 */

/* audio status (bin) */

#define aud_00 0x00 /* Audio status byte not supported or not valid */

#define audx11 0x0b /* Audio play operation in progress             */

#define audx12 0x0c /* Audio play operation paused                  */

#define audx13 0x0d /* Audio play operation successfully completed  */

#define audx14 0x0e /* Audio play operation stopped due to error    */

#define audx15 0x0f /* No current audio status to return            */

/* audio status (bcd) */

#define aud_11 0x11 /* Audio play operation in progress             */

#define aud_12 0x12 /* Audio play operation paused                  */

#define aud_13 0x13 /* Audio play operation successfully completed  */

#define aud_14 0x14 /* Audio play operation stopped due to error    */

#define aud_15 0x15 /* No current audio status to return            */

/*

 * highest allowed drive number (MINOR+1)

 */

#define NR_SBPCD        4

/*

 * we try to never disable interrupts - seems to work

 */

#define SBPCD_DIS_IRQ   0

/*

 * "write byte to port"

 */

#define OUT(x,y)        outb(y,x)

/*==========================================================================*/

#define MIXER_addr SOUND_BASE+4 /* sound card's address register */

#define MIXER_data SOUND_BASE+5 /* sound card's data register */

#define MIXER_CD_Volume 0x28    /* internal SB Pro register address */

/*==========================================================================*/

#define MAX_TRACKS      99

#define ERR_DISKCHANGE 615

/*==========================================================================*/

/*

 * To make conversions easier (machine dependent!)

 */

typedef union _msf

{

        u_int n;

        u_char c[4];

} MSF;

typedef union _blk

{

        u_int n;

        u_char c[4];

} BLK;

/*==========================================================================*/

/*============================================================================

==============================================================================

COMMAND SET of "old" drives like CR-521, CR-522

               (the CR-562 family is different):

No.     Command                        Code

--------------------------------------------

Drive Commands:

 1      Seek                            01

 2      Read Data                       02

 3      Read XA-Data                    03

 4      Read Header                     04

 5      Spin Up                         05

 6      Spin Down                       06

 7      Diagnostic                      07

 8      Read UPC                        08

 9      Read ISRC                       09

10      Play Audio                      0A

11      Play Audio MSF                  0B

12      Play Audio Track/Index          0C

Status Commands:

13      Read Status                     81

14      Read Error                      82

15      Read Drive Version              83

16      Mode Select                     84

17      Mode Sense                      85

18      Set XA Parameter                86

19      Read XA Parameter               87

20      Read Capacity                   88

21      Read SUB_Q                      89

22      Read Disc Code                  8A

23      Read Disc Information           8B

24      Read TOC                        8C

25      Pause/Resume                    8D

26      Read Packet                     8E

27      Read Path Check                 00

all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first

mnemo     7-byte command        #bytes response (r0...rn)

________ ____________________  ____

Read Status:

status:  81.                    (1)  one-byte command, gives the main

                                                          status byte

Read Error:

check1:  82 00 00 00 00 00 00.  (6)  r1: audio status

Read Packet:

check2:  8e xx 00 00 00 00 00. (xx)  gets xx bytes response, relating

                                        to commands 01 04 05 07 08 09

Play Audio:

play:    0a ll-bb-aa nn-nn-nn.  (0)  play audio, ll-bb-aa: starting block (lba),

                                                 nn-nn-nn: #blocks

Play Audio MSF:

         0b mm-ss-ff mm-ss-ff   (0)  play audio from/to

Play Audio Track/Index:

         0c ...

Pause/Resume:

pause:   8d pr 00 00 00 00 00.  (0)  pause (pr=00)

                                     resume (pr=80) audio playing

Mode Select:

         84 00 nn-nn ??-?? 00   (0)  nn-nn: 2048 or 2340

                                     possibly defines transfer size

set_vol: 84 83 00 00 sw le 00.  (0)  sw(itch): lrxxxxxx (off=1)

                                     le(vel): min=0, max=FF, else half

                                     (firmware 2.11)

Mode Sense:

get_vol: 85 03 00 00 00 00 00.  (2)  tell current audio volume setting

Read Disc Information:

tocdesc: 8b 00 00 00 00 00 00.  (6)  read the toc descriptor ("msf-bin"-format)

Read TOC:

tocent:  8c fl nn 00 00 00 00.  (8)  read toc entry #nn

                                       (fl=0:"lba"-, =2:"msf-bin"-format)

Read Capacity:

capacit: 88 00 00 00 00 00 00.  (5)  "read CD-ROM capacity"

Read Path Check:

ping:    00 00 00 00 00 00 00.  (2)  r0=AA, r1=55

                                     ("ping" if the drive is connected)

Read Drive Version:

ident:   83 00 00 00 00 00 00. (12)  gives "MATSHITAn.nn"

                                     (n.nn = 2.01, 2.11., 3.00, ...)

Seek:

seek:    01 00 ll-bb-aa 00 00.  (0)

seek:    01 02 mm-ss-ff 00 00.  (0)

Read Data:

read:    02 xx-xx-xx nn-nn fl. (??)  read nn-nn blocks of 2048 bytes,

                                     starting at block xx-xx-xx

                                     fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx

Read XA-Data:

read:    03 xx-xx-xx nn-nn fl. (??)  read nn-nn blocks of 2340 bytes,

                                     starting at block xx-xx-xx

                                     fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx

Read SUB_Q:

         89 fl 00 00 00 00 00. (13)  r0: audio status, r4-r7: lba/msf,

                                       fl=0: "lba", fl=2: "msf"

Read Disc Code:

         8a 00 00 00 00 00 00. (14)  possibly extended "check condition"-info

Read Header:

         04 00 ll-bb-aa 00 00.  (0)   4 bytes response with "check2"

         04 02 mm-ss-ff 00 00.  (0)   4 bytes response with "check2"

Spin Up:

         05 00 ll-bb-aa 00 00.  (0)  possibly implies a "seek"

Spin Down:

         06 ...

Diagnostic:

         07 00 ll-bb-aa 00 00.  (2)   2 bytes response with "check2"

         07 02 mm-ss-ff 00 00.  (2)   2 bytes response with "check2"

Read UPC:

         08 00 ll-bb-aa 00 00. (16)

         08 02 mm-ss-ff 00 00. (16)

Read ISRC:

         09 00 ll-bb-aa 00 00. (15)  15 bytes response with "check2"

         09 02 mm-ss-ff 00 00. (15)  15 bytes response with "check2"

Set XA Parameter:

         86 ...

Read XA Parameter:

         87 ...

==============================================================================

============================================================================*/

/*

 * commands

 *

 * CR-52x:      CMD0_

 * CR-56x:      CMD1_

 * CD200:       CMD2_

 * LCS-7260:    CMDL_

 * TEAC CD-55A: CMDT_

 * ECS-AT:      CMDV_

 */

#define CMD1_RESET      0x0a

#define CMD2_RESET      0x01

#define CMDT_RESET      0xc0

#define CMD1_LOCK_CTL   0x0c

#define CMD2_LOCK_CTL   0x1e

#define CMDT_LOCK_CTL   CMD2_LOCK_CTL

#define CMDL_LOCK_CTL   0x0e

#define CMDV_LOCK_CTL   CMDL_LOCK_CTL

#define CMD1_TRAY_CTL   0x07

#define CMD2_TRAY_CTL   0x1b

#define CMDT_TRAY_CTL   CMD2_TRAY_CTL

#define CMDL_TRAY_CTL   0x0d

#define CMDV_TRAY_CTL   CMDL_TRAY_CTL

#define CMD1_MULTISESS  0x8d

#define CMDL_MULTISESS  0x8c

#define CMDV_MULTISESS  CMDL_MULTISESS

#define CMD1_SUBCHANINF 0x11

#define CMD2_SUBCHANINF 0x??

#define CMD1_ABORT      0x08

#define CMD2_ABORT      0x08

#define CMDT_ABORT      0x08

#define CMD2_x02        0x02

#define CMD2_SETSPEED   0xda

#define CMD0_PATH_CHECK 0x00

#define CMD1_PATH_CHECK 0x???

#define CMD2_PATH_CHECK 0x???

#define CMDT_PATH_CHECK 0x???

#define CMDL_PATH_CHECK CMD0_PATH_CHECK

#define CMDV_PATH_CHECK CMD0_PATH_CHECK

#define CMD0_SEEK       0x01

#define CMD1_SEEK       CMD0_SEEK

#define CMD2_SEEK       0x2b

#define CMDT_SEEK       CMD2_SEEK

#define CMDL_SEEK       CMD0_SEEK

#define CMDV_SEEK       CMD0_SEEK

#define CMD0_READ       0x02

#define CMD1_READ       0x10

#define CMD2_READ       0x28

#define CMDT_READ       CMD2_READ

#define CMDL_READ       CMD0_READ

#define CMDV_READ       CMD0_READ

#define CMD0_READ_XA    0x03

#define CMD2_READ_XA    0xd4

#define CMD2_READ_XA2   0xd5

#define CMDL_READ_XA    CMD0_READ_XA /* really ?? */

#define CMDV_READ_XA    CMD0_READ_XA

#define CMD0_READ_HEAD  0x04

#define CMD0_SPINUP     0x05

#define CMD1_SPINUP     0x02

#define CMD2_SPINUP     CMD2_TRAY_CTL

#define CMDL_SPINUP     CMD0_SPINUP

#define CMDV_SPINUP     CMD0_SPINUP

#define CMD0_SPINDOWN   0x06 /* really??? */

#define CMD1_SPINDOWN   0x06

#define CMD2_SPINDOWN   CMD2_TRAY_CTL

#define CMDL_SPINDOWN   0x0d

#define CMDV_SPINDOWN   CMD0_SPINDOWN

#define CMD0_DIAG       0x07

#define CMD0_READ_UPC   0x08

#define CMD1_READ_UPC   0x88

#define CMD2_READ_UPC   0x???

#define CMDL_READ_UPC   CMD0_READ_UPC

#define CMDV_READ_UPC   0x8f

#define CMD0_READ_ISRC  0x09

#define CMD0_PLAY       0x0a

#define CMD1_PLAY       0x???

#define CMD2_PLAY       0x???

#define CMDL_PLAY       CMD0_PLAY

#define CMDV_PLAY       CMD0_PLAY

#define CMD0_PLAY_MSF   0x0b

#define CMD1_PLAY_MSF   0x0e

#define CMD2_PLAY_MSF   0x47

#define CMDT_PLAY_MSF   CMD2_PLAY_MSF

#define CMDL_PLAY_MSF   0x???

#define CMD0_PLAY_TI    0x0c

#define CMD1_PLAY_TI    0x0f

#define CMD0_STATUS     0x81

#define CMD1_STATUS     0x05

#define CMD2_STATUS     0x00

#define CMDT_STATUS     CMD2_STATUS

#define CMDL_STATUS     CMD0_STATUS

#define CMDV_STATUS     CMD0_STATUS

#define CMD2_SEEK_LEADIN 0x00

#define CMD0_READ_ERR   0x82

#define CMD1_READ_ERR   CMD0_READ_ERR

#define CMD2_READ_ERR   0x03

#define CMDT_READ_ERR   CMD2_READ_ERR /* get audio status */

#define CMDL_READ_ERR   CMD0_READ_ERR

#define CMDV_READ_ERR   CMD0_READ_ERR

#define CMD0_READ_VER   0x83

#define CMD1_READ_VER   CMD0_READ_VER

#define CMD2_READ_VER   0x12

#define CMDT_READ_VER   CMD2_READ_VER /* really ?? */

#define CMDL_READ_VER   CMD0_READ_VER

#define CMDV_READ_VER   CMD0_READ_VER

#define CMD0_SETMODE    0x84

#define CMD1_SETMODE    0x09

#define CMD2_SETMODE    0x55

#define CMDT_SETMODE    CMD2_SETMODE

#define CMDL_SETMODE    CMD0_SETMODE

#define CMD0_GETMODE    0x85

#define CMD1_GETMODE    0x84

#define CMD2_GETMODE    0x5a

#define CMDT_GETMODE    CMD2_GETMODE

#define CMDL_GETMODE    CMD0_GETMODE

#define CMD0_SET_XA     0x86

#define CMD0_GET_XA     0x87

#define CMD0_CAPACITY   0x88

#define CMD1_CAPACITY   0x85

#define CMD2_CAPACITY   0x25

#define CMDL_CAPACITY   CMD0_CAPACITY /* missing in some firmware versions */

#define CMD0_READSUBQ   0x89

#define CMD1_READSUBQ   0x87

#define CMD2_READSUBQ   0x42

#define CMDT_READSUBQ   CMD2_READSUBQ

#define CMDL_READSUBQ   CMD0_READSUBQ

#define CMDV_READSUBQ   CMD0_READSUBQ

#define CMD0_DISKCODE   0x8a

#define CMD0_DISKINFO   0x8b

#define CMD1_DISKINFO   CMD0_DISKINFO

#define CMD2_DISKINFO   0x43

#define CMDT_DISKINFO   CMD2_DISKINFO

#define CMDL_DISKINFO   CMD0_DISKINFO

#define CMDV_DISKINFO   CMD0_DISKINFO

#define CMD0_READTOC    0x8c

#define CMD1_READTOC    CMD0_READTOC

#define CMD2_READTOC    0x???

#define CMDL_READTOC    CMD0_READTOC

#define CMDV_READTOC    CMD0_READTOC

#define CMD0_PAU_RES    0x8d

#define CMD1_PAU_RES    0x0d

#define CMD2_PAU_RES    0x4b

#define CMDT_PAUSE      CMD2_PAU_RES

#define CMDL_PAU_RES    CMD0_PAU_RES

#define CMDV_PAUSE      CMD0_PAU_RES

#define CMD0_PACKET     0x8e

#define CMD1_PACKET     CMD0_PACKET

#define CMD2_PACKET     0x???

#define CMDL_PACKET     CMD0_PACKET

#define CMDV_PACKET     0x???

/*==========================================================================*/

/*==========================================================================*/

#endif _LINUX_SBPCD_H

/*==========================================================================*/

/*

 * Overrides for Emacs so that we follow Linus's tabbing style.

 * Emacs will notice this stuff at the end of the file and automatically

 * adjust the settings for this buffer only.  This must remain at the end

 * of the file.

 * ---------------------------------------------------------------------------

 * Local variables:

 * c-indent-level: 8

 * c-brace-imaginary-offset: 0

 * c-brace-offset: -8

 * c-argdecl-indent: 8

 * c-label-offset: -8

 * c-continued-statement-offset: 8

 * c-continued-brace-offset: 0

 * End:

 */