OpenCores
URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [rc203soc/] [sw/] [uClinux/] [include/] [linux/] [scc.h] - Blame information for rev 1633

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 1633 jcastillo
/* $Id: scc.h,v 1.1 2005-12-20 11:32:26 jcastillo Exp $ */
2
 
3
#ifndef _SCC_H
4
#define _SCC_H
5
 
6
#include <linux/if_ether.h>
7
 
8
/* selection of hardware types */
9
 
10
#define PA0HZP          0x00    /* hardware type for PA0HZP SCC card and compatible */
11
#define EAGLE           0x01    /* hardware type for EAGLE card */
12
#define PC100           0x02    /* hardware type for PC100 card */
13
#define PRIMUS          0x04    /* hardware type for PRIMUS-PC (DG9BL) card */
14
#define DRSI            0x08    /* hardware type for DRSI PC*Packet card */
15
#define BAYCOM          0x10    /* hardware type for BayCom (U)SCC */
16
 
17
/* Paranoia check... */
18
 
19
#define SCC_PARANOIA_CHECK      /* tell the user if something is going wrong */
20
 
21
/* TTY ioctl() commands */
22
 
23
#define TIOCSCCCFG       _IOW('Z', 0, sizeof(struct scc_hw_config))     /* set hardware parameters */
24
#define TIOCSCCINI        _IO('Z', 1)                                   /* init driver */
25
#define TIOCSCCCHANINI   _IOW('Z', 2, sizeof(struct scc_modem))         /* init channel */
26
#define TIOCSCCSMEM      _IOW('Z', 3, sizeof(struct scc_mem_config))    /* adjust buffer pools */
27
#define TIOCSCCGKISS    _IOWR('Z', 4, sizeof(struct scc_kiss_cmd))      /* get kiss parameter */
28
#define TIOCSCCSKISS     _IOW('Z', 5, sizeof(struct scc_kiss_cmd))      /* set kiss parameter */
29
#define TIOCSCCGSTAT     _IOR('Z', 6, sizeof(struct scc_stat))          /* get scc status */
30
 
31
/* old TTY ioctl() commands */
32
 
33
#define TIOCSCCCFG_OLD  0x2200
34
#define TIOCSCCINI_OLD  0x2201
35
#define TIOCCHANINI_OLD 0x2202
36
#define TIOCCHANMEM_OLD 0x2210
37
#define TIOCSKISS_OLD   0x2282
38
#define TIOCGKISS_OLD   0x2283
39
#define TIOCSCCSTAT_OLD 0x2284
40
 
41
/* DEV ioctl() commands */
42
 
43
enum SCC_IOCTL_CMD {
44
        SIOCSCCRESERVED=SIOCDEVPRIVATE,
45
        SIOCSCCCFG,
46
        SIOCSCCINI,
47
        SIOCSCCCHANINI,
48
        SIOCSCCSMEM,
49
        SIOCSCCGKISS,
50
        SIOCSCCSKISS,
51
        SIOCSCCGSTAT
52
};
53
 
54
/* magic number */
55
 
56
#define SCC_MAGIC       0x8530          /* ;-) */
57
 
58
/* KISS protocol flags */
59
#define FEND    192
60
#define FESC    219
61
#define TFEND   220
62
#define TFESC   221
63
 
64
/* KISS state machine */
65
 
66
enum SCC_KISS_STATES {
67
        KISS_IDLE,
68
        KISS_DATA,
69
        KISS_ESCAPE,
70
        KISS_RXFRAME
71
};
72
 
73
/* Device parameter control (from WAMPES) */
74
 
75
enum SCC_KISS_PARAMS {
76
        PARAM_TXDELAY=1,
77
        PARAM_PERSIST,
78
        PARAM_SLOTTIME,
79
        PARAM_TXTAIL,
80
        PARAM_FULLDUP,
81
        PARAM_SOFTDCD,          /* was: PARAM_HW */
82
        PARAM_MUTE,             /* ??? */
83
        PARAM_DTR,
84
        PARAM_RTS,
85
        PARAM_SPEED,
86
        PARAM_ENDDELAY,         /* ??? */
87
        PARAM_GROUP,
88
        PARAM_IDLE,
89
        PARAM_MIN,
90
        PARAM_MAXKEY,
91
        PARAM_WAIT,
92
        PARAM_MAXDEFER,
93
        PARAM_TX,
94
        PARAM_HWEVENT=31,
95
        PARAM_RETURN=255        /* reset kiss mode */
96
};
97
 
98
/* fulldup parameter */
99
 
100
enum SCC_KISS_DUPLEX_MODES {
101
        KISS_DUPLEX_HALF,       /* normal CSMA operation */
102
        KISS_DUPLEX_FULL,       /* fullduplex, key down trx after transmission */
103
        KISS_DUPLEX_LINK,       /* fullduplex, key down trx after 'idletime' sec */
104
        KISS_DUPLEX_OPTIMA,     /* fullduplex, let the protocol layer control the hw */
105
};
106
 
107
/* misc. parameters */
108
 
109
#define TIMER_OFF       65535U  /* to switch off timers */
110
#define NO_SUCH_PARAM   65534U  /* param not implemented */
111
 
112
/* HWEVENT parameter */
113
 
114
enum SCC_HWEV_PARAMETERS {
115
        HWEV_DCD_ON,
116
        HWEV_DCD_OFF,
117
        HWEV_ALL_SENT
118
};
119
 
120
/* channel grouping */
121
 
122
#define RXGROUP         0x100   /* if set, only tx when all channels clear */
123
#define TXGROUP         0x200   /* if set, don't transmit simultaneously */
124
 
125
/* Tx/Rx clock sources */
126
 
127
enum SCC_CLK_SOURCES {
128
        CLK_DPLL,       /* normal halfduplex operation */
129
        CLK_EXTERNAL,   /* external clocking (G3RUH/DF9IC modems) */
130
        CLK_DIVIDER     /* Rx = DPLL, Tx = divider (fullduplex with */
131
                        /* modems without clock regeneration */
132
};
133
 
134
/* Tx state */
135
 
136
enum SCC_TX_STATES {
137
        TXS_IDLE,       /* Transmitter off, no data pending */
138
        TXS_BUSY,       /* waiting for permission to send / tailtime */
139
        TXS_ACTIVE,     /* Transmitter on, sending data */
140
        TXS_NEWFRAME,   /* reset CRC and send (next) frame */
141
        TXS_IDLE2,      /* Transmitter on, no data pending */
142
        TXS_WAIT,       /* Waiting for Mintime to expire */
143
        TXS_TIMEOUT     /* We had a transmission timeout */
144
};
145
 
146
enum SCC_TX_KEY {TX_OFF, TX_ON}; /* command for scc_key_trx() */
147
 
148
/* Buffer management */
149
 
150
#define BT_RECEIVE  1           /* buffer allocated by receive */
151
#define BT_TRANSMIT 2           /* buffer allocated by transmit */
152
 
153
#define NULLBUF  (struct mbuf *)0
154
#define NULLBUFP (struct mbuf **)0
155
 
156
 
157
typedef unsigned short io_port; /* type definition for an 'io port address' */
158
typedef unsigned short ioaddr;  /* old def */
159
 
160
#ifdef SCC_DELAY
161
#define Inb(port)       inb_p(port)
162
#define Outb(port, val) outb_p(val, port)
163
#else
164
#define Inb(port)       inb(port)
165
#define Outb(port, val) outb(val, port)
166
#endif
167
 
168
#define TIMER_OFF 65535U
169
 
170
/* Basic message buffer structure */
171
 
172
struct mbuf {
173
        struct mbuf *next;      /* Link to next buffer */
174
        struct mbuf *prev;      /* Link to previous buffer */
175
 
176
        int cnt;                /* Number of bytes stored in buffer */
177
        unsigned char *rw_ptr;  /* read-write pointer */
178
        unsigned char data[0];   /* anchor for allocated buffer */
179
};
180
 
181
/* SCC channel control structure for KISS */
182
 
183
struct scc_kiss {
184
        unsigned char txdelay;          /* Transmit Delay 10 ms/cnt */
185
        unsigned char persist;          /* Persistence (0-255) as a % */
186
        unsigned char slottime;         /* Delay to wait on persistence hit */
187
        unsigned char tailtime;         /* Delay after last byte written */
188
        unsigned char fulldup;          /* Full Duplex mode 0=CSMA 1=DUP 2=ALWAYS KEYED */
189
        unsigned char waittime;         /* Waittime before any transmit attempt */
190
        unsigned int  maxkeyup;         /* Maximum time to transmit (seconds) */
191
        unsigned char mintime;          /* Minimal offtime after MAXKEYUP timeout (seconds) */
192
        unsigned int  idletime;         /* Maximum idle time in ALWAYS KEYED mode (seconds) */
193
        unsigned int  maxdefer;         /* Timer for CSMA channel busy limit */
194
        unsigned char tx_inhibit;       /* Transmit is not allowed when set */
195
        unsigned char group;            /* Group ID for AX.25 TX interlocking */
196
        unsigned char mode;             /* 'normal' or 'hwctrl' mode (unused) */
197
 
198
        unsigned char softdcd;          /* Use DPLL instead of DCD pin for carrier detect */
199
};
200
 
201
 
202
/* SCC statistical information */
203
 
204
struct scc_stat {
205
        long rxints;            /* Receiver interrupts */
206
        long txints;            /* Transmitter interrupts */
207
        long exints;            /* External/status interrupts */
208
        long spints;            /* Special receiver interrupts */
209
 
210
        long txframes;          /* Packets sent */
211
        long rxframes;          /* Number of Frames Actually Received */
212
        long rxerrs;            /* CRC Errors */
213
        long txerrs;            /* KISS errors */
214
 
215
        unsigned int nospace;   /* "Out of buffers" */
216
        unsigned int rx_over;   /* Receiver Overruns */
217
        unsigned int tx_under;  /* Transmitter Underruns */
218
 
219
        unsigned int tx_state;  /* Transmitter state */
220
 
221
        char tx_kiss_state;     /* state of the kiss interpreter */
222
        char rx_kiss_state;     /* state of the kiss encoder */
223
 
224
        int tx_queued;          /* tx frames enqueued */
225
        int rx_queued;          /* rx frames enqueued */
226
 
227
        unsigned int rxbuffers; /* allocated rx_buffers */
228
        unsigned int txbuffers; /* allocated tx_buffers */
229
        unsigned int bufsize;   /* used buffersize */
230
 
231
        unsigned char is_netdev;/* If set: act as network instead of character device */
232
};
233
 
234
 
235
struct scc_modem {
236
        long speed;             /* Line speed, bps */
237
        char clocksrc;          /* 0 = DPLL, 1 = external, 2 = divider */
238
        char nrz;               /* NRZ instead of NRZI */
239
};
240
 
241
struct scc_kiss_cmd {
242
        int      command;       /* one of the KISS-Commands defined above */
243
        unsigned param;         /* KISS-Param */
244
};
245
 
246
struct scc_hw_config {
247
        io_port data_a;         /* data port channel A */
248
        io_port ctrl_a;         /* control port channel A */
249
        io_port data_b;         /* data port channel B */
250
        io_port ctrl_b;         /* control port channel B */
251
        io_port vector_latch;   /* INTACK-Latch (#) */
252
        io_port special;        /* special function port */
253
 
254
        int     irq;            /* irq */
255
        long    clock;          /* clock */
256
        char    option;         /* command for function port */
257
 
258
        char brand;             /* hardware type */
259
        char escc;              /* use ext. features of a 8580/85180/85280 */
260
};
261
 
262
/* (#) only one INTACK latch allowed. */
263
 
264
 
265
struct scc_mem_config {
266
        unsigned int rxbuffers;
267
        unsigned int txbuffers;
268
        unsigned int bufsize;
269
};
270
 
271
 
272
/* SCC channel structure */
273
 
274
struct scc_channel {
275
        int magic;              /* magic word */
276
 
277
        int init;               /* channel exists? */
278
        struct tty_struct *tty; /* link to tty control structure */
279
        char tty_opened;        /* No. of open() calls... */
280
        char throttled;         /* driver is throttled  */
281
 
282
        struct device *dev;     /* link to device control structure */
283
        struct enet_statistics dev_stat;
284
                                /* device statistics */
285
 
286
        char brand;             /* manufacturer of the board */
287
        long clock;             /* used clock */
288
 
289
        io_port ctrl;           /* I/O address of CONTROL register */
290
        io_port data;           /* I/O address of DATA register */
291
        io_port special;        /* I/O address of special function port */
292
        int irq;                /* Number of Interrupt */
293
 
294
        char option;
295
        char enhanced;          /* Enhanced SCC support */
296
 
297
        unsigned char wreg[16]; /* Copy of last written value in WRx */
298
        unsigned char status;   /* Copy of R0 at last external interrupt */
299
 
300
        struct scc_kiss kiss;   /* control structure for KISS params */
301
        struct scc_stat stat;   /* statistical information */
302
        struct scc_modem modem; /* modem information */
303
 
304
        char mempool;           /* pool empty or allocated? */
305
        struct mbuf *rx_buffer_pool; /* free buffers for rx/tx frames are */
306
        struct mbuf *tx_buffer_pool; /* linked in these ring chains */
307
 
308
        struct mbuf *rx_queue;  /* chain of received frames */
309
        struct mbuf *tx_queue;  /* chain of frames due to transmit */
310
        struct mbuf *rx_bp;     /* pointer to frame currently received */
311
        struct mbuf *tx_bp;     /* pointer to frame currently transmitted */
312
 
313
        struct mbuf *kiss_decode_bp; /* frame we are receiving from tty */
314
        struct mbuf *kiss_encode_bp; /* frame we are sending to tty */
315
 
316
        /* Timer */
317
 
318
        struct timer_list tx_t; /* tx timer for this channel */
319
        struct timer_list tx_wdog;
320
                                /* tx watchdogs */
321
        struct timer_list rx_t; /* rx timer */
322
};
323
 
324
 
325
/* 8530 Serial Communications Controller Register definitions */
326
#define FLAG    0x7e
327
 
328
/* Write Register 0 */
329
#define R0      0                /* Register selects */
330
#define R1      1
331
#define R2      2
332
#define R3      3
333
#define R4      4
334
#define R5      5
335
#define R6      6
336
#define R7      7
337
#define R8      8
338
#define R9      9
339
#define R10     10
340
#define R11     11
341
#define R12     12
342
#define R13     13
343
#define R14     14
344
#define R15     15
345
 
346
#define NULLCODE        0        /* Null Code */
347
#define POINT_HIGH      0x8     /* Select upper half of registers */
348
#define RES_EXT_INT     0x10    /* Reset Ext. Status Interrupts */
349
#define SEND_ABORT      0x18    /* HDLC Abort */
350
#define RES_RxINT_FC    0x20    /* Reset RxINT on First Character */
351
#define RES_Tx_P        0x28    /* Reset TxINT Pending */
352
#define ERR_RES         0x30    /* Error Reset */
353
#define RES_H_IUS       0x38    /* Reset highest IUS */
354
 
355
#define RES_Rx_CRC      0x40    /* Reset Rx CRC Checker */
356
#define RES_Tx_CRC      0x80    /* Reset Tx CRC Checker */
357
#define RES_EOM_L       0xC0    /* Reset EOM latch */
358
 
359
/* Write Register 1 */
360
 
361
#define EXT_INT_ENAB    0x1     /* Ext Int Enable */
362
#define TxINT_ENAB      0x2     /* Tx Int Enable */
363
#define PAR_SPEC        0x4     /* Parity is special condition */
364
 
365
#define RxINT_DISAB     0        /* Rx Int Disable */
366
#define RxINT_FCERR     0x8     /* Rx Int on First Character Only or Error */
367
#define INT_ALL_Rx      0x10    /* Int on all Rx Characters or error */
368
#define INT_ERR_Rx      0x18    /* Int on error only */
369
 
370
#define WT_RDY_RT       0x20    /* Wait/Ready on R/T */
371
#define WT_FN_RDYFN     0x40    /* Wait/FN/Ready FN */
372
#define WT_RDY_ENAB     0x80    /* Wait/Ready Enable */
373
 
374
/* Write Register 2 (Interrupt Vector) */
375
 
376
/* Write Register 3 */
377
 
378
#define RxENABLE        0x1     /* Rx Enable */
379
#define SYNC_L_INH      0x2     /* Sync Character Load Inhibit */
380
#define ADD_SM          0x4     /* Address Search Mode (SDLC) */
381
#define RxCRC_ENAB      0x8     /* Rx CRC Enable */
382
#define ENT_HM          0x10    /* Enter Hunt Mode */
383
#define AUTO_ENAB       0x20    /* Auto Enables */
384
#define Rx5             0x0     /* Rx 5 Bits/Character */
385
#define Rx7             0x40    /* Rx 7 Bits/Character */
386
#define Rx6             0x80    /* Rx 6 Bits/Character */
387
#define Rx8             0xc0    /* Rx 8 Bits/Character */
388
 
389
/* Write Register 4 */
390
 
391
#define PAR_ENA         0x1     /* Parity Enable */
392
#define PAR_EVEN        0x2     /* Parity Even/Odd* */
393
 
394
#define SYNC_ENAB       0        /* Sync Modes Enable */
395
#define SB1             0x4     /* 1 stop bit/char */
396
#define SB15            0x8     /* 1.5 stop bits/char */
397
#define SB2             0xc     /* 2 stop bits/char */
398
 
399
#define MONSYNC         0        /* 8 Bit Sync character */
400
#define BISYNC          0x10    /* 16 bit sync character */
401
#define SDLC            0x20    /* SDLC Mode (01111110 Sync Flag) */
402
#define EXTSYNC         0x30    /* External Sync Mode */
403
 
404
#define X1CLK           0x0     /* x1 clock mode */
405
#define X16CLK          0x40    /* x16 clock mode */
406
#define X32CLK          0x80    /* x32 clock mode */
407
#define X64CLK          0xC0    /* x64 clock mode */
408
 
409
/* Write Register 5 */
410
 
411
#define TxCRC_ENAB      0x1     /* Tx CRC Enable */
412
#define RTS             0x2     /* RTS */
413
#define SDLC_CRC        0x4     /* SDLC/CRC-16 */
414
#define TxENAB          0x8     /* Tx Enable */
415
#define SND_BRK         0x10    /* Send Break */
416
#define Tx5             0x0     /* Tx 5 bits (or less)/character */
417
#define Tx7             0x20    /* Tx 7 bits/character */
418
#define Tx6             0x40    /* Tx 6 bits/character */
419
#define Tx8             0x60    /* Tx 8 bits/character */
420
#define DTR             0x80    /* DTR */
421
 
422
/* Write Register 6 (Sync bits 0-7/SDLC Address Field) */
423
 
424
/* Write Register 7 (Sync bits 8-15/SDLC 01111110) */
425
 
426
/* Write Register 8 (transmit buffer) */
427
 
428
/* Write Register 9 (Master interrupt control) */
429
#define VIS     1       /* Vector Includes Status */
430
#define NV      2       /* No Vector */
431
#define DLC     4       /* Disable Lower Chain */
432
#define MIE     8       /* Master Interrupt Enable */
433
#define STATHI  0x10    /* Status high */
434
#define NORESET 0        /* No reset on write to R9 */
435
#define CHRB    0x40    /* Reset channel B */
436
#define CHRA    0x80    /* Reset channel A */
437
#define FHWRES  0xc0    /* Force hardware reset */
438
 
439
/* Write Register 10 (misc control bits) */
440
#define BIT6    1       /* 6 bit/8bit sync */
441
#define LOOPMODE 2      /* SDLC Loop mode */
442
#define ABUNDER 4       /* Abort/flag on SDLC xmit underrun */
443
#define MARKIDLE 8      /* Mark/flag on idle */
444
#define GAOP    0x10    /* Go active on poll */
445
#define NRZ     0        /* NRZ mode */
446
#define NRZI    0x20    /* NRZI mode */
447
#define FM1     0x40    /* FM1 (transition = 1) */
448
#define FM0     0x60    /* FM0 (transition = 0) */
449
#define CRCPS   0x80    /* CRC Preset I/O */
450
 
451
/* Write Register 11 (Clock Mode control) */
452
#define TRxCXT  0        /* TRxC = Xtal output */
453
#define TRxCTC  1       /* TRxC = Transmit clock */
454
#define TRxCBR  2       /* TRxC = BR Generator Output */
455
#define TRxCDP  3       /* TRxC = DPLL output */
456
#define TRxCOI  4       /* TRxC O/I */
457
#define TCRTxCP 0        /* Transmit clock = RTxC pin */
458
#define TCTRxCP 8       /* Transmit clock = TRxC pin */
459
#define TCBR    0x10    /* Transmit clock = BR Generator output */
460
#define TCDPLL  0x18    /* Transmit clock = DPLL output */
461
#define RCRTxCP 0        /* Receive clock = RTxC pin */
462
#define RCTRxCP 0x20    /* Receive clock = TRxC pin */
463
#define RCBR    0x40    /* Receive clock = BR Generator output */
464
#define RCDPLL  0x60    /* Receive clock = DPLL output */
465
#define RTxCX   0x80    /* RTxC Xtal/No Xtal */
466
 
467
/* Write Register 12 (lower byte of baud rate generator time constant) */
468
 
469
/* Write Register 13 (upper byte of baud rate generator time constant) */
470
 
471
/* Write Register 14 (Misc control bits) */
472
#define BRENABL 1       /* Baud rate generator enable */
473
#define BRSRC   2       /* Baud rate generator source */
474
#define DTRREQ  4       /* DTR/Request function */
475
#define AUTOECHO 8      /* Auto Echo */
476
#define LOOPBAK 0x10    /* Local loopback */
477
#define SEARCH  0x20    /* Enter search mode */
478
#define RMC     0x40    /* Reset missing clock */
479
#define DISDPLL 0x60    /* Disable DPLL */
480
#define SSBR    0x80    /* Set DPLL source = BR generator */
481
#define SSRTxC  0xa0    /* Set DPLL source = RTxC */
482
#define SFMM    0xc0    /* Set FM mode */
483
#define SNRZI   0xe0    /* Set NRZI mode */
484
 
485
/* Write Register 15 (external/status interrupt control) */
486
#define ZCIE    2       /* Zero count IE */
487
#define DCDIE   8       /* DCD IE */
488
#define SYNCIE  0x10    /* Sync/hunt IE */
489
#define CTSIE   0x20    /* CTS IE */
490
#define TxUIE   0x40    /* Tx Underrun/EOM IE */
491
#define BRKIE   0x80    /* Break/Abort IE */
492
 
493
 
494
/* Read Register 0 */
495
#define Rx_CH_AV        0x1     /* Rx Character Available */
496
#define ZCOUNT          0x2     /* Zero count */
497
#define Tx_BUF_EMP      0x4     /* Tx Buffer empty */
498
#define DCD             0x8     /* DCD */
499
#define SYNC_HUNT       0x10    /* Sync/hunt */
500
#define CTS             0x20    /* CTS */
501
#define TxEOM           0x40    /* Tx underrun */
502
#define BRK_ABRT        0x80    /* Break/Abort */
503
 
504
/* Read Register 1 */
505
#define ALL_SNT         0x1     /* All sent */
506
/* Residue Data for 8 Rx bits/char programmed */
507
#define RES3            0x8     /* 0/3 */
508
#define RES4            0x4     /* 0/4 */
509
#define RES5            0xc     /* 0/5 */
510
#define RES6            0x2     /* 0/6 */
511
#define RES7            0xa     /* 0/7 */
512
#define RES8            0x6     /* 0/8 */
513
#define RES18           0xe     /* 1/8 */
514
#define RES28           0x0     /* 2/8 */
515
/* Special Rx Condition Interrupts */
516
#define PAR_ERR         0x10    /* Parity error */
517
#define Rx_OVR          0x20    /* Rx Overrun Error */
518
#define CRC_ERR         0x40    /* CRC/Framing Error */
519
#define END_FR          0x80    /* End of Frame (SDLC) */
520
 
521
/* Read Register 2 (channel B only) - Interrupt vector */
522
 
523
#define VECTOR_MASK     0x06
524
 
525
#define TXINT   0x00
526
#define EXINT   0x02
527
#define RXINT   0x04
528
#define SPINT   0x06
529
 
530
 
531
/* Read Register 3 (interrupt pending register) ch a only */
532
#define CHBEXT  0x1             /* Channel B Ext/Stat IP */
533
#define CHBTxIP 0x2             /* Channel B Tx IP */
534
#define CHBRxIP 0x4             /* Channel B Rx IP */
535
#define CHAEXT  0x8             /* Channel A Ext/Stat IP */
536
#define CHATxIP 0x10            /* Channel A Tx IP */
537
#define CHARxIP 0x20            /* Channel A Rx IP */
538
 
539
/* Read Register 8 (receive data register) */
540
 
541
/* Read Register 10  (misc status bits) */
542
#define ONLOOP  2               /* On loop */
543
#define LOOPSEND 0x10           /* Loop sending */
544
#define CLK2MIS 0x40            /* Two clocks missing */
545
#define CLK1MIS 0x80            /* One clock missing */
546
 
547
/* Read Register 12 (lower byte of baud rate generator constant) */
548
 
549
/* Read Register 13 (upper byte of baud rate generator constant) */
550
 
551
/* Read Register 15 (value of WR 15) */
552
 
553
 
554
/* 8536 register definitions */
555
 
556
#define CIO_MICR        0x00    /* Master interrupt control register */
557
#define CIO_MCCR        0x01    /* Master configuration control register */
558
#define CIO_CTMS1       0x1c    /* Counter/timer mode specification #1 */
559
#define CIO_CTMS2       0x1d    /* Counter/timer mode specification #2 */
560
#define CIO_CTMS3       0x1e    /* Counter/timer mode specification #3 */
561
#define CIO_IVR         0x04    /* Interrupt vector register */
562
 
563
#define CIO_CSR1        0x0a    /* Command and status register CTC #1 */
564
#define CIO_CSR2        0x0b    /* Command and status register CTC #2 */
565
#define CIO_CSR3        0x0c    /* Command and status register CTC #3 */
566
 
567
#define CIO_CT1MSB      0x16    /* CTC #1 Timer constant - MSB */
568
#define CIO_CT1LSB      0x17    /* CTC #1 Timer constant - LSB */
569
#define CIO_CT2MSB      0x18    /* CTC #2 Timer constant - MSB */
570
#define CIO_CT2LSB      0x19    /* CTC #2 Timer constant - LSB */
571
#define CIO_CT3MSB      0x1a    /* CTC #3 Timer constant - MSB */
572
#define CIO_CT3LSB      0x1b    /* CTC #3 Timer constant - LSB */
573
#define CIO_PDCA        0x23    /* Port A data direction control */
574
#define CIO_PDCB        0x2b    /* Port B data direction control */
575
 
576
#define CIO_GCB         0x04    /* CTC Gate command bit */
577
#define CIO_TCB         0x02    /* CTC Trigger command bit */
578
#define CIO_IE          0xc0    /* CTC Interrupt enable (set) */
579
#define CIO_CIP         0x20    /* CTC Clear interrupt pending */
580
#define CIO_IP          0x20    /* CTC Interrupt pending */
581
 
582
 
583
/* 8580/85180/85280 Enhanced SCC register definitions */
584
 
585
/* Write Register 7' (SDLC/HDLC Programmable Enhancements) */
586
#define AUTOTXF 0x01            /* Auto Tx Flag */
587
#define AUTOEOM 0x02            /* Auto EOM Latch Reset */
588
#define AUTORTS 0x04            /* Auto RTS */
589
#define TXDNRZI 0x08            /* TxD Pulled High in SDLC NRZI mode */
590
#define FASTDTR 0x10            /* Fast DTR/REQ Mode */
591
#define CRCCBCR 0x20            /* CRC Check Bytes Completely Received */
592
#define EXTRDEN 0x40            /* Extended Read Enabled */
593
 
594
/* Write Register 15 (external/status interrupt control) */
595
#define SHDLCE  1               /* SDLC/HDLC Enhancements Enable */
596
#define FIFOE   4               /* FIFO Enable */
597
 
598
/* Read Register 6 (frame status FIFO) */
599
#define BCLSB   0xff            /* LSB of 14 bits count */
600
 
601
/* Read Register 7 (frame status FIFO) */
602
#define BCMSB   0x3f            /* MSB of 14 bits count */
603
#define FDA     0x40            /* FIFO Data Available Status */
604
#define FOY     0x80            /* FIFO Overflow Status */
605
 
606
#endif  /* _SCC_H */
607
 
608
/* global functions */
609
 
610
extern int scc_init(void);

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.