Subversion Repositories or1k_old

The 3Com Etherlink Plus (3c505) driver.

This driver now uses DMA.  There is currently no support for PIO operation.

The default DMA channel is 6, and is set at compile time.

If no base address is given at boot time, the driver will autoprobe

ports 0x300, 0x280 and 0x310 (in that order).  If no IRQ is given, the driver

will try to probe for it.

The driver can be used as a loadable module.  See net-modules.txt for details

of the parameters it can take.

At the moment, the driver probably won't work with old (revision 2) hardware.

There is one compile-time setting in the CONFIG file:

ELP_DEBUG

 The driver debug level.  It's probably best to leave it at 0 most of the time.

 If you are having trouble, setting it to 1 may give you more information.

 Any higher setting is too verbose for most purposes.

To do:

 Support for old boards

 Make DMA configurable at run time

 Improve probe/setup code

 Test multicast and promiscuous operation

Authors:

 The driver is mainly written by Craig Southeren, email

 .

 Parts of the driver (adapting the driver to 1.1.4+ kernels,

 IRQ/address detection, some changes) and this README by

 Juha Laiho .

 DMA mode, more fixes, etc, by Philip Blundell