URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [uclinux/] [uClinux-2.0.x/] [arch/] [ppc/] [config.in] - Blame information for rev 1765

Go to most recent revision | Details | Compare with Previous | View Log


#
# For a description of the syntax of this configuration file,
# see the Configure script.
#
mainmenu_name "Linux Kernel Configuration"
 
mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu
 
mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
  bool 'Kernel daemon support (e.g. autoload of modules)' CONFIG_KERNELD
fi
endmenu
 
mainmenu_option next_comment
comment 'General setup'
 
bool 'Kernel math emulation' CONFIG_MATH_EMULATION
bool 'Networking support' CONFIG_NET
bool 'Limit memory to low 16MB' CONFIG_MAX_16M
bool 'PCI bios support' CONFIG_PCI
if [ "$CONFIG_PCI" = "y" ]; then
  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    bool '   PCI bridge optimization (experimental)' CONFIG_PCI_OPTIMIZE
  fi
fi
bool 'System V IPC' CONFIG_SYSVIPC
tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
if [ "$CONFIG_BINFMT_ELF" = "y" ]; then
  bool 'Compile kernel as ELF - if your GCC is ELF-GCC' CONFIG_KERNEL_ELF
fi
 
source drivers/block/Config.in
 
if [ "$CONFIG_NET" = "y" ]; then
  source net/Config.in
fi
 
mainmenu_option next_comment
comment 'SCSI support'
 
tristate 'SCSI support' CONFIG_SCSI
 
if [ "$CONFIG_SCSI" != "n" ]; then
  source drivers/scsi/Config.in
fi
endmenu
 
if [ "$CONFIG_NET" = "y" ]; then
  mainmenu_option next_comment
  comment 'Network device support'
 
  bool 'Network device support' CONFIG_NETDEVICES
  if [ "$CONFIG_NETDEVICES" = "y" ]; then
    source drivers/net/Config.in
  fi
  endmenu
fi
 
mainmenu_option next_comment
comment 'ISDN subsystem'
 
tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
  source drivers/isdn/Config.in
fi
endmenu
 
mainmenu_option next_comment
comment 'CD-ROM drivers (not for SCSI or IDE/ATAPI drives)'
 
bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
  source drivers/cdrom/Config.in
fi
endmenu
 
source fs/Config.in
 
source drivers/char/Config.in
 
mainmenu_option next_comment
comment 'Sound'
 
tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
  source drivers/sound/Config.in
fi
endmenu
 
mainmenu_option next_comment
comment 'Kernel hacking'
 
#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
bool 'Kernel profiling support' CONFIG_PROFILE
if [ "$CONFIG_PROFILE" = "y" ]; then
  int ' Profile shift count' CONFIG_PROFILE_SHIFT 2
fi
endmenu

Line No.	Rev	Author	Line
1	199	simons	`#`
2			`# For a description of the syntax of this configuration file,`
3			`# see the Configure script.`
4			`#`
5			`mainmenu_name "Linux Kernel Configuration"`
6
7			`mainmenu_option next_comment`
8			`comment 'Code maturity level options'`
9			`bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL`
10			`endmenu`
11
12			`mainmenu_option next_comment`
13			`comment 'Loadable module support'`
14			`bool 'Enable loadable module support' CONFIG_MODULES`
15			`if [ "$CONFIG_MODULES" = "y" ]; then`
16			`bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS`
17			`bool 'Kernel daemon support (e.g. autoload of modules)' CONFIG_KERNELD`
18			`fi`
19			`endmenu`
20
21			`mainmenu_option next_comment`
22			`comment 'General setup'`
23
24			`bool 'Kernel math emulation' CONFIG_MATH_EMULATION`
25			`bool 'Networking support' CONFIG_NET`
26			`bool 'Limit memory to low 16MB' CONFIG_MAX_16M`
27			`bool 'PCI bios support' CONFIG_PCI`
28			`if [ "$CONFIG_PCI" = "y" ]; then`
29			`if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then`
30			`bool ' PCI bridge optimization (experimental)' CONFIG_PCI_OPTIMIZE`
31			`fi`
32			`fi`
33			`bool 'System V IPC' CONFIG_SYSVIPC`
34			`tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT`
35			`tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA`
36			`tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF`
37			`if [ "$CONFIG_BINFMT_ELF" = "y" ]; then`
38			`bool 'Compile kernel as ELF - if your GCC is ELF-GCC' CONFIG_KERNEL_ELF`
39			`fi`
40
41			`source drivers/block/Config.in`
42
43			`if [ "$CONFIG_NET" = "y" ]; then`
44			`source net/Config.in`
45			`fi`
46
47			`mainmenu_option next_comment`
48			`comment 'SCSI support'`
49
50			`tristate 'SCSI support' CONFIG_SCSI`
51
52			`if [ "$CONFIG_SCSI" != "n" ]; then`
53			`source drivers/scsi/Config.in`
54			`fi`
55			`endmenu`
56
57			`if [ "$CONFIG_NET" = "y" ]; then`
58			`mainmenu_option next_comment`
59			`comment 'Network device support'`
60
61			`bool 'Network device support' CONFIG_NETDEVICES`
62			`if [ "$CONFIG_NETDEVICES" = "y" ]; then`
63			`source drivers/net/Config.in`
64			`fi`
65			`endmenu`
66			`fi`
67
68			`mainmenu_option next_comment`
69			`comment 'ISDN subsystem'`
70
71			`tristate 'ISDN support' CONFIG_ISDN`
72			`if [ "$CONFIG_ISDN" != "n" ]; then`
73			`source drivers/isdn/Config.in`
74			`fi`
75			`endmenu`
76
77			`mainmenu_option next_comment`
78			`comment 'CD-ROM drivers (not for SCSI or IDE/ATAPI drives)'`
79
80			`bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI`
81			`if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then`
82			`source drivers/cdrom/Config.in`
83			`fi`
84			`endmenu`
85
86			`source fs/Config.in`
87
88			`source drivers/char/Config.in`
89
90			`mainmenu_option next_comment`
91			`comment 'Sound'`
92
93			`tristate 'Sound card support' CONFIG_SOUND`
94			`if [ "$CONFIG_SOUND" != "n" ]; then`
95			`source drivers/sound/Config.in`
96			`fi`
97			`endmenu`
98
99			`mainmenu_option next_comment`
100			`comment 'Kernel hacking'`
101
102			`#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC`
103			`bool 'Kernel profiling support' CONFIG_PROFILE`
104			`if [ "$CONFIG_PROFILE" = "y" ]; then`
105			`int ' Profile shift count' CONFIG_PROFILE_SHIFT 2`
106			`fi`
107			`endmenu`

Browse

Tools

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [uclinux/] [uClinux-2.0.x/] [arch/] [ppc/] [config.in] - Blame information for rev 1765