URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [uclinux/] [uClinux-2.0.x/] [drivers/] [char/] [cd1865.h] - Blame information for rev 199

Go to most recent revision | Details | Compare with Previous | View Log


/*
 *      linux/drivers/char/cd1865.h -- Definitions relating to the CD1865
 *                          for the Specialix IO8+ multiport serial driver.
 *
 *      Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl)
 *      Copyright (C) 1994-1996  Dmitry Gorodchanin (pgmdsg@ibi.com)
 *
 *      Specialix pays for the development and support of this driver.
 *      Please DO contact io8-linux@specialix.co.uk if you require
 *      support.
 *
 *      This driver was developped in the BitWizard linux device
 *      driver service. If you require a linux device driver for your
 *      product, please contact devices@BitWizard.nl for a quote.
 *
 */
 
/*
 * Definitions for Driving CD180/CD1864/CD1865 based eightport serial cards.
 */
 
 
/* Values of choice for Interrupt ACKs */
/* These values are "obligatory" if you use the register based
 * interrupt acknowledgements. See page 99-101 of V2.0 of the CD1865
 * databook */
#define SX_ACK_MINT     0x75    /* goes to PILR1                           */
#define SX_ACK_TINT     0x76    /* goes to PILR2                           */
#define SX_ACK_RINT     0x77    /* goes to PILR3                           */
 
/* Chip ID (is used when chips ar daisy chained.) */
#define SX_ID           0x10
 
/* Definitions for Cirrus Logic CL-CD186x 8-port async mux chip */
 
#define CD186x_NCH       8       /* Total number of channels                */
#define CD186x_TPC       16      /* Ticks per character                     */
#define CD186x_NFIFO     8       /* TX FIFO size                            */
 
 
/* Global registers */
 
#define CD186x_GIVR      0x40    /* Global Interrupt Vector Register        */
#define CD186x_GICR      0x41    /* Global Interrupting Channel Register    */
#define CD186x_PILR1     0x61    /* Priority Interrupt Level Register 1     */
#define CD186x_PILR2     0x62    /* Priority Interrupt Level Register 2     */
#define CD186x_PILR3     0x63    /* Priority Interrupt Level Register 3     */
#define CD186x_CAR       0x64    /* Channel Access Register                 */
#define CD186x_SRSR      0x65    /* Channel Access Register                 */
#define CD186x_GFRCR     0x6b    /* Global Firmware Revision Code Register  */
#define CD186x_PPRH      0x70    /* Prescaler Period Register High          */
#define CD186x_PPRL      0x71    /* Prescaler Period Register Low           */
#define CD186x_RDR       0x78    /* Receiver Data Register                  */
#define CD186x_RCSR      0x7a    /* Receiver Character Status Register      */
#define CD186x_TDR       0x7b    /* Transmit Data Register                  */
#define CD186x_EOIR      0x7f    /* End of Interrupt Register               */
#define CD186x_MRAR      0x75    /* Modem Request Acknowlege register       */
#define CD186x_TRAR      0x76    /* Transmit Request Acknowlege register    */
#define CD186x_RRAR      0x77    /* Recieve Request Acknowlege register     */
#define CD186x_SRCR      0x66    /* Service Request Configuration register  */
 
/* Channel Registers */
 
#define CD186x_CCR       0x01    /* Channel Command Register                */
#define CD186x_IER       0x02    /* Interrupt Enable Register               */
#define CD186x_COR1      0x03    /* Channel Option Register 1               */
#define CD186x_COR2      0x04    /* Channel Option Register 2               */
#define CD186x_COR3      0x05    /* Channel Option Register 3               */
#define CD186x_CCSR      0x06    /* Channel Control Status Register         */
#define CD186x_RDCR      0x07    /* Receive Data Count Register             */
#define CD186x_SCHR1     0x09    /* Special Character Register 1            */
#define CD186x_SCHR2     0x0a    /* Special Character Register 2            */
#define CD186x_SCHR3     0x0b    /* Special Character Register 3            */
#define CD186x_SCHR4     0x0c    /* Special Character Register 4            */
#define CD186x_MCOR1     0x10    /* Modem Change Option 1 Register          */
#define CD186x_MCOR2     0x11    /* Modem Change Option 2 Register          */
#define CD186x_MCR       0x12    /* Modem Change Register                   */
#define CD186x_RTPR      0x18    /* Receive Timeout Period Register         */
#define CD186x_MSVR      0x28    /* Modem Signal Value Register             */
#define CD186x_MSVRTS    0x29    /* Modem Signal Value Register             */
#define CD186x_MSVDTR    0x2a    /* Modem Signal Value Register             */
#define CD186x_RBPRH     0x31    /* Receive Baud Rate Period Register High  */
#define CD186x_RBPRL     0x32    /* Receive Baud Rate Period Register Low   */
#define CD186x_TBPRH     0x39    /* Transmit Baud Rate Period Register High */
#define CD186x_TBPRL     0x3a    /* Transmit Baud Rate Period Register Low  */
 
 
/* Global Interrupt Vector Register (R/W) */
 
#define GIVR_ITMASK     0x07     /* Interrupt type mask                     */
#define  GIVR_IT_MODEM   0x01    /* Modem Signal Change Interrupt           */
#define  GIVR_IT_TX      0x02    /* Transmit Data Interrupt                 */
#define  GIVR_IT_RCV     0x03    /* Receive Good Data Interrupt             */
#define  GIVR_IT_REXC    0x07    /* Receive Exception Interrupt             */
 
 
/* Global Interrupt Channel Register (R/W) */
 
#define GICR_CHAN       0x1c    /* Channel Number Mask                     */
#define GICR_CHAN_OFF   2       /* Channel Number shift                    */
 
 
/* Channel Address Register (R/W) */
 
#define CAR_CHAN        0x07    /* Channel Number Mask                     */
#define CAR_A7          0x08    /* A7 Address Extension (unused)           */
 
 
/* Receive Character Status Register (R/O) */
 
#define RCSR_TOUT       0x80    /* Rx Timeout                              */
#define RCSR_SCDET      0x70    /* Special Character Detected Mask         */
#define  RCSR_NO_SC      0x00   /* No Special Characters Detected          */
#define  RCSR_SC_1       0x10   /* Special Char 1 (or 1 & 3) Detected      */
#define  RCSR_SC_2       0x20   /* Special Char 2 (or 2 & 4) Detected      */
#define  RCSR_SC_3       0x30   /* Special Char 3 Detected                 */
#define  RCSR_SC_4       0x40   /* Special Char 4 Detected                 */
#define RCSR_BREAK      0x08    /* Break has been detected                 */
#define RCSR_PE         0x04    /* Parity Error                            */
#define RCSR_FE         0x02    /* Frame Error                             */
#define RCSR_OE         0x01    /* Overrun Error                           */
 
 
/* Channel Command Register (R/W) (commands in groups can be OR-ed) */
 
#define CCR_HARDRESET   0x81    /* Reset the chip                          */
 
#define CCR_SOFTRESET   0x80    /* Soft Channel Reset                      */
 
#define CCR_CORCHG1     0x42    /* Channel Option Register 1 Changed       */
#define CCR_CORCHG2     0x44    /* Channel Option Register 2 Changed       */
#define CCR_CORCHG3     0x48    /* Channel Option Register 3 Changed       */
 
#define CCR_SSCH1       0x21    /* Send Special Character 1                */
 
#define CCR_SSCH2       0x22    /* Send Special Character 2                */
 
#define CCR_SSCH3       0x23    /* Send Special Character 3                */
 
#define CCR_SSCH4       0x24    /* Send Special Character 4                */
 
#define CCR_TXEN        0x18    /* Enable Transmitter                      */
#define CCR_RXEN        0x12    /* Enable Receiver                         */
 
#define CCR_TXDIS       0x14    /* Disable Transmitter                     */
#define CCR_RXDIS       0x11    /* Disable Receiver                        */
 
 
/* Interrupt Enable Register (R/W) */
 
#define IER_DSR         0x80    /* Enable interrupt on DSR change          */
#define IER_CD          0x40    /* Enable interrupt on CD change           */
#define IER_CTS         0x20    /* Enable interrupt on CTS change          */
#define IER_RXD         0x10    /* Enable interrupt on Receive Data        */
#define IER_RXSC        0x08    /* Enable interrupt on Receive Spec. Char  */
#define IER_TXRDY       0x04    /* Enable interrupt on TX FIFO empty       */
#define IER_TXEMPTY     0x02    /* Enable interrupt on TX completely empty */
#define IER_RET         0x01    /* Enable interrupt on RX Exc. Timeout     */
 
 
/* Channel Option Register 1 (R/W) */
 
#define COR1_ODDP       0x80    /* Odd Parity                              */
#define COR1_PARMODE    0x60    /* Parity Mode mask                        */
#define  COR1_NOPAR      0x00   /* No Parity                               */
#define  COR1_FORCEPAR   0x20   /* Force Parity                            */
#define  COR1_NORMPAR    0x40   /* Normal Parity                           */
#define COR1_IGNORE     0x10    /* Ignore Parity on RX                     */
#define COR1_STOPBITS   0x0c    /* Number of Stop Bits                     */
#define  COR1_1SB        0x00   /* 1 Stop Bit                              */
#define  COR1_15SB       0x04   /* 1.5 Stop Bits                           */
#define  COR1_2SB        0x08   /* 2 Stop Bits                             */
#define COR1_CHARLEN    0x03    /* Character Length                        */
#define  COR1_5BITS      0x00   /* 5 bits                                  */
#define  COR1_6BITS      0x01   /* 6 bits                                  */
#define  COR1_7BITS      0x02   /* 7 bits                                  */
#define  COR1_8BITS      0x03   /* 8 bits                                  */
 
 
/* Channel Option Register 2 (R/W) */
 
#define COR2_IXM        0x80    /* Implied XON mode                        */
#define COR2_TXIBE      0x40    /* Enable In-Band (XON/XOFF) Flow Control  */
#define COR2_ETC        0x20    /* Embedded Tx Commands Enable             */
#define COR2_LLM        0x10    /* Local Loopback Mode                     */
#define COR2_RLM        0x08    /* Remote Loopback Mode                    */
#define COR2_RTSAO      0x04    /* RTS Automatic Output Enable             */
#define COR2_CTSAE      0x02    /* CTS Automatic Enable                    */
#define COR2_DSRAE      0x01    /* DSR Automatic Enable                    */
 
 
/* Channel Option Register 3 (R/W) */
 
#define COR3_XONCH      0x80    /* XON is a pair of characters (1 & 3)     */
#define COR3_XOFFCH     0x40    /* XOFF is a pair of characters (2 & 4)    */
#define COR3_FCT        0x20    /* Flow-Control Transparency Mode          */
#define COR3_SCDE       0x10    /* Special Character Detection Enable      */
#define COR3_RXTH       0x0f    /* RX FIFO Threshold value (1-8)           */
 
 
/* Channel Control Status Register (R/O) */
 
#define CCSR_RXEN       0x80    /* Receiver Enabled                        */
#define CCSR_RXFLOFF    0x40    /* Receive Flow Off (XOFF was sent)        */
#define CCSR_RXFLON     0x20    /* Receive Flow On (XON was sent)          */
#define CCSR_TXEN       0x08    /* Transmitter Enabled                     */
#define CCSR_TXFLOFF    0x04    /* Transmit Flow Off (got XOFF)            */
#define CCSR_TXFLON     0x02    /* Transmit Flow On (got XON)              */
 
 
/* Modem Change Option Register 1 (R/W) */
 
#define MCOR1_DSRZD     0x80    /* Detect 0->1 transition of DSR           */
#define MCOR1_CDZD      0x40    /* Detect 0->1 transition of CD            */
#define MCOR1_CTSZD     0x20    /* Detect 0->1 transition of CTS           */
#define MCOR1_DTRTH     0x0f    /* Auto DTR flow control Threshold (1-8)   */
#define  MCOR1_NODTRFC   0x0     /* Automatic DTR flow control disabled     */
 
 
/* Modem Change Option Register 2 (R/W) */
 
#define MCOR2_DSROD     0x80    /* Detect 1->0 transition of DSR           */
#define MCOR2_CDOD      0x40    /* Detect 1->0 transition of CD            */
#define MCOR2_CTSOD     0x20    /* Detect 1->0 transition of CTS           */
 
/* Modem Change Register (R/W) */
 
#define MCR_DSRCHG      0x80    /* DSR Changed                             */
#define MCR_CDCHG       0x40    /* CD Changed                              */
#define MCR_CTSCHG      0x20    /* CTS Changed                             */
 
 
/* Modem Signal Value Register (R/W) */
 
#define MSVR_DSR        0x80    /* Current state of DSR input              */
#define MSVR_CD         0x40    /* Current state of CD input               */
#define MSVR_CTS        0x20    /* Current state of CTS input              */
#define MSVR_DTR        0x02    /* Current state of DTR output             */
#define MSVR_RTS        0x01    /* Current state of RTS output             */
 
 
/* Escape characters */
 
#define CD186x_C_ESC     0x00    /* Escape character                        */
#define CD186x_C_SBRK    0x81    /* Start sending BREAK                     */
#define CD186x_C_DELAY   0x82    /* Delay output                            */
#define CD186x_C_EBRK    0x83    /* Stop sending BREAK                      */
 
#define SRSR_RREQint     0x10    /* This chip wants "rec" serviced          */
#define SRSR_TREQint     0x04    /* This chip wants "transmit" serviced     */
#define SRSR_MREQint     0x01    /* This chip wants "mdm change" serviced   */
 
 
 
#define SRCR_PKGTYPE    0x80
#define SRCR_REGACKEN   0x40
#define SRCR_DAISYEN    0x20
#define SRCR_GLOBPRI    0x10
#define SRCR_UNFAIR     0x08
#define SRCR_AUTOPRI    0x02
#define SRCR_PRISEL     0x01
 
 

Browse

Tools

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [uclinux/] [uClinux-2.0.x/] [drivers/] [char/] [cd1865.h] - Blame information for rev 199

Line No.	Rev	Author	Line
1	199	simons	`/*`
2			`* linux/drivers/char/cd1865.h -- Definitions relating to the CD1865`
3			`* for the Specialix IO8+ multiport serial driver.`
4			`*`
5			`* Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl)`
6			`* Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com)`
7			`*`
8			`* Specialix pays for the development and support of this driver.`
9			`* Please DO contact io8-linux@specialix.co.uk if you require`
10			`* support.`
11			`*`
12			`* This driver was developped in the BitWizard linux device`
13			`* driver service. If you require a linux device driver for your`
14			`* product, please contact devices@BitWizard.nl for a quote.`
15			`*`
16			`*/`
17
18			`/*`
19			`* Definitions for Driving CD180/CD1864/CD1865 based eightport serial cards.`
20			`*/`
21
22
23			`/* Values of choice for Interrupt ACKs */`
24			`/* These values are "obligatory" if you use the register based`
25			`* interrupt acknowledgements. See page 99-101 of V2.0 of the CD1865`
26			`* databook */`
27			`#define SX_ACK_MINT 0x75 /* goes to PILR1 */`
28			`#define SX_ACK_TINT 0x76 /* goes to PILR2 */`
29			`#define SX_ACK_RINT 0x77 /* goes to PILR3 */`
30
31			`/* Chip ID (is used when chips ar daisy chained.) */`
32			`#define SX_ID 0x10`
33
34			`/* Definitions for Cirrus Logic CL-CD186x 8-port async mux chip */`
35
36			`#define CD186x_NCH 8 /* Total number of channels */`
37			`#define CD186x_TPC 16 /* Ticks per character */`
38			`#define CD186x_NFIFO 8 /* TX FIFO size */`
39
40
41			`/* Global registers */`
42
43			`#define CD186x_GIVR 0x40 /* Global Interrupt Vector Register */`
44			`#define CD186x_GICR 0x41 /* Global Interrupting Channel Register */`
45			`#define CD186x_PILR1 0x61 /* Priority Interrupt Level Register 1 */`
46			`#define CD186x_PILR2 0x62 /* Priority Interrupt Level Register 2 */`
47			`#define CD186x_PILR3 0x63 /* Priority Interrupt Level Register 3 */`
48			`#define CD186x_CAR 0x64 /* Channel Access Register */`
49			`#define CD186x_SRSR 0x65 /* Channel Access Register */`
50			`#define CD186x_GFRCR 0x6b /* Global Firmware Revision Code Register */`
51			`#define CD186x_PPRH 0x70 /* Prescaler Period Register High */`
52			`#define CD186x_PPRL 0x71 /* Prescaler Period Register Low */`
53			`#define CD186x_RDR 0x78 /* Receiver Data Register */`
54			`#define CD186x_RCSR 0x7a /* Receiver Character Status Register */`
55			`#define CD186x_TDR 0x7b /* Transmit Data Register */`
56			`#define CD186x_EOIR 0x7f /* End of Interrupt Register */`
57			`#define CD186x_MRAR 0x75 /* Modem Request Acknowlege register */`
58			`#define CD186x_TRAR 0x76 /* Transmit Request Acknowlege register */`
59			`#define CD186x_RRAR 0x77 /* Recieve Request Acknowlege register */`
60			`#define CD186x_SRCR 0x66 /* Service Request Configuration register */`
61
62			`/* Channel Registers */`
63
64			`#define CD186x_CCR 0x01 /* Channel Command Register */`
65			`#define CD186x_IER 0x02 /* Interrupt Enable Register */`
66			`#define CD186x_COR1 0x03 /* Channel Option Register 1 */`
67			`#define CD186x_COR2 0x04 /* Channel Option Register 2 */`
68			`#define CD186x_COR3 0x05 /* Channel Option Register 3 */`
69			`#define CD186x_CCSR 0x06 /* Channel Control Status Register */`
70			`#define CD186x_RDCR 0x07 /* Receive Data Count Register */`
71			`#define CD186x_SCHR1 0x09 /* Special Character Register 1 */`
72			`#define CD186x_SCHR2 0x0a /* Special Character Register 2 */`
73			`#define CD186x_SCHR3 0x0b /* Special Character Register 3 */`
74			`#define CD186x_SCHR4 0x0c /* Special Character Register 4 */`
75			`#define CD186x_MCOR1 0x10 /* Modem Change Option 1 Register */`
76			`#define CD186x_MCOR2 0x11 /* Modem Change Option 2 Register */`
77			`#define CD186x_MCR 0x12 /* Modem Change Register */`
78			`#define CD186x_RTPR 0x18 /* Receive Timeout Period Register */`
79			`#define CD186x_MSVR 0x28 /* Modem Signal Value Register */`
80			`#define CD186x_MSVRTS 0x29 /* Modem Signal Value Register */`
81			`#define CD186x_MSVDTR 0x2a /* Modem Signal Value Register */`
82			`#define CD186x_RBPRH 0x31 /* Receive Baud Rate Period Register High */`
83			`#define CD186x_RBPRL 0x32 /* Receive Baud Rate Period Register Low */`
84			`#define CD186x_TBPRH 0x39 /* Transmit Baud Rate Period Register High */`
85			`#define CD186x_TBPRL 0x3a /* Transmit Baud Rate Period Register Low */`
86
87
88			`/* Global Interrupt Vector Register (R/W) */`
89
90			`#define GIVR_ITMASK 0x07 /* Interrupt type mask */`
91			`#define GIVR_IT_MODEM 0x01 /* Modem Signal Change Interrupt */`
92			`#define GIVR_IT_TX 0x02 /* Transmit Data Interrupt */`
93			`#define GIVR_IT_RCV 0x03 /* Receive Good Data Interrupt */`
94			`#define GIVR_IT_REXC 0x07 /* Receive Exception Interrupt */`
95
96
97			`/* Global Interrupt Channel Register (R/W) */`
98
99			`#define GICR_CHAN 0x1c /* Channel Number Mask */`
100			`#define GICR_CHAN_OFF 2 /* Channel Number shift */`
101
102
103			`/* Channel Address Register (R/W) */`
104
105			`#define CAR_CHAN 0x07 /* Channel Number Mask */`
106			`#define CAR_A7 0x08 /* A7 Address Extension (unused) */`
107
108
109			`/* Receive Character Status Register (R/O) */`
110
111			`#define RCSR_TOUT 0x80 /* Rx Timeout */`
112			`#define RCSR_SCDET 0x70 /* Special Character Detected Mask */`
113			`#define RCSR_NO_SC 0x00 /* No Special Characters Detected */`
114			`#define RCSR_SC_1 0x10 /* Special Char 1 (or 1 & 3) Detected */`
115			`#define RCSR_SC_2 0x20 /* Special Char 2 (or 2 & 4) Detected */`
116			`#define RCSR_SC_3 0x30 /* Special Char 3 Detected */`
117			`#define RCSR_SC_4 0x40 /* Special Char 4 Detected */`
118			`#define RCSR_BREAK 0x08 /* Break has been detected */`
119			`#define RCSR_PE 0x04 /* Parity Error */`
120			`#define RCSR_FE 0x02 /* Frame Error */`
121			`#define RCSR_OE 0x01 /* Overrun Error */`
122
123
124			`/* Channel Command Register (R/W) (commands in groups can be OR-ed) */`
125
126			`#define CCR_HARDRESET 0x81 /* Reset the chip */`
127
128			`#define CCR_SOFTRESET 0x80 /* Soft Channel Reset */`
129
130			`#define CCR_CORCHG1 0x42 /* Channel Option Register 1 Changed */`
131			`#define CCR_CORCHG2 0x44 /* Channel Option Register 2 Changed */`
132			`#define CCR_CORCHG3 0x48 /* Channel Option Register 3 Changed */`
133
134			`#define CCR_SSCH1 0x21 /* Send Special Character 1 */`
135
136			`#define CCR_SSCH2 0x22 /* Send Special Character 2 */`
137
138			`#define CCR_SSCH3 0x23 /* Send Special Character 3 */`
139
140			`#define CCR_SSCH4 0x24 /* Send Special Character 4 */`
141
142			`#define CCR_TXEN 0x18 /* Enable Transmitter */`
143			`#define CCR_RXEN 0x12 /* Enable Receiver */`
144
145			`#define CCR_TXDIS 0x14 /* Disable Transmitter */`
146			`#define CCR_RXDIS 0x11 /* Disable Receiver */`
147
148
149			`/* Interrupt Enable Register (R/W) */`
150
151			`#define IER_DSR 0x80 /* Enable interrupt on DSR change */`
152			`#define IER_CD 0x40 /* Enable interrupt on CD change */`
153			`#define IER_CTS 0x20 /* Enable interrupt on CTS change */`
154			`#define IER_RXD 0x10 /* Enable interrupt on Receive Data */`
155			`#define IER_RXSC 0x08 /* Enable interrupt on Receive Spec. Char */`
156			`#define IER_TXRDY 0x04 /* Enable interrupt on TX FIFO empty */`
157			`#define IER_TXEMPTY 0x02 /* Enable interrupt on TX completely empty */`
158			`#define IER_RET 0x01 /* Enable interrupt on RX Exc. Timeout */`
159
160
161			`/* Channel Option Register 1 (R/W) */`
162
163			`#define COR1_ODDP 0x80 /* Odd Parity */`
164			`#define COR1_PARMODE 0x60 /* Parity Mode mask */`
165			`#define COR1_NOPAR 0x00 /* No Parity */`
166			`#define COR1_FORCEPAR 0x20 /* Force Parity */`
167			`#define COR1_NORMPAR 0x40 /* Normal Parity */`
168			`#define COR1_IGNORE 0x10 /* Ignore Parity on RX */`
169			`#define COR1_STOPBITS 0x0c /* Number of Stop Bits */`
170			`#define COR1_1SB 0x00 /* 1 Stop Bit */`
171			`#define COR1_15SB 0x04 /* 1.5 Stop Bits */`
172			`#define COR1_2SB 0x08 /* 2 Stop Bits */`
173			`#define COR1_CHARLEN 0x03 /* Character Length */`
174			`#define COR1_5BITS 0x00 /* 5 bits */`
175			`#define COR1_6BITS 0x01 /* 6 bits */`
176			`#define COR1_7BITS 0x02 /* 7 bits */`
177			`#define COR1_8BITS 0x03 /* 8 bits */`
178
179
180			`/* Channel Option Register 2 (R/W) */`
181
182			`#define COR2_IXM 0x80 /* Implied XON mode */`
183			`#define COR2_TXIBE 0x40 /* Enable In-Band (XON/XOFF) Flow Control */`
184			`#define COR2_ETC 0x20 /* Embedded Tx Commands Enable */`
185			`#define COR2_LLM 0x10 /* Local Loopback Mode */`
186			`#define COR2_RLM 0x08 /* Remote Loopback Mode */`
187			`#define COR2_RTSAO 0x04 /* RTS Automatic Output Enable */`
188			`#define COR2_CTSAE 0x02 /* CTS Automatic Enable */`
189			`#define COR2_DSRAE 0x01 /* DSR Automatic Enable */`
190
191
192			`/* Channel Option Register 3 (R/W) */`
193
194			`#define COR3_XONCH 0x80 /* XON is a pair of characters (1 & 3) */`
195			`#define COR3_XOFFCH 0x40 /* XOFF is a pair of characters (2 & 4) */`
196			`#define COR3_FCT 0x20 /* Flow-Control Transparency Mode */`
197			`#define COR3_SCDE 0x10 /* Special Character Detection Enable */`
198			`#define COR3_RXTH 0x0f /* RX FIFO Threshold value (1-8) */`
199
200
201			`/* Channel Control Status Register (R/O) */`
202
203			`#define CCSR_RXEN 0x80 /* Receiver Enabled */`
204			`#define CCSR_RXFLOFF 0x40 /* Receive Flow Off (XOFF was sent) */`
205			`#define CCSR_RXFLON 0x20 /* Receive Flow On (XON was sent) */`
206			`#define CCSR_TXEN 0x08 /* Transmitter Enabled */`
207			`#define CCSR_TXFLOFF 0x04 /* Transmit Flow Off (got XOFF) */`
208			`#define CCSR_TXFLON 0x02 /* Transmit Flow On (got XON) */`
209
210
211			`/* Modem Change Option Register 1 (R/W) */`
212
213			`#define MCOR1_DSRZD 0x80 /* Detect 0->1 transition of DSR */`
214			`#define MCOR1_CDZD 0x40 /* Detect 0->1 transition of CD */`
215			`#define MCOR1_CTSZD 0x20 /* Detect 0->1 transition of CTS */`
216			`#define MCOR1_DTRTH 0x0f /* Auto DTR flow control Threshold (1-8) */`
217			`#define MCOR1_NODTRFC 0x0 /* Automatic DTR flow control disabled */`
218
219
220			`/* Modem Change Option Register 2 (R/W) */`
221
222			`#define MCOR2_DSROD 0x80 /* Detect 1->0 transition of DSR */`
223			`#define MCOR2_CDOD 0x40 /* Detect 1->0 transition of CD */`
224			`#define MCOR2_CTSOD 0x20 /* Detect 1->0 transition of CTS */`
225
226			`/* Modem Change Register (R/W) */`
227
228			`#define MCR_DSRCHG 0x80 /* DSR Changed */`
229			`#define MCR_CDCHG 0x40 /* CD Changed */`
230			`#define MCR_CTSCHG 0x20 /* CTS Changed */`
231
232
233			`/* Modem Signal Value Register (R/W) */`
234
235			`#define MSVR_DSR 0x80 /* Current state of DSR input */`
236			`#define MSVR_CD 0x40 /* Current state of CD input */`
237			`#define MSVR_CTS 0x20 /* Current state of CTS input */`
238			`#define MSVR_DTR 0x02 /* Current state of DTR output */`
239			`#define MSVR_RTS 0x01 /* Current state of RTS output */`
240
241
242			`/* Escape characters */`
243
244			`#define CD186x_C_ESC 0x00 /* Escape character */`
245			`#define CD186x_C_SBRK 0x81 /* Start sending BREAK */`
246			`#define CD186x_C_DELAY 0x82 /* Delay output */`
247			`#define CD186x_C_EBRK 0x83 /* Stop sending BREAK */`
248
249			`#define SRSR_RREQint 0x10 /* This chip wants "rec" serviced */`
250			`#define SRSR_TREQint 0x04 /* This chip wants "transmit" serviced */`
251			`#define SRSR_MREQint 0x01 /* This chip wants "mdm change" serviced */`
252
253
254
255			`#define SRCR_PKGTYPE 0x80`
256			`#define SRCR_REGACKEN 0x40`
257			`#define SRCR_DAISYEN 0x20`
258			`#define SRCR_GLOBPRI 0x10`
259			`#define SRCR_UNFAIR 0x08`
260			`#define SRCR_AUTOPRI 0x02`
261			`#define SRCR_PRISEL 0x01`
262
263