URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [uclinux/] [uClinux-2.0.x/] [drivers/] [isdn/] [sc/] [ioctl.c] - Blame information for rev 1782

Details | Compare with Previous | View Log


#define __NO_VERSION__
#include "includes.h"
#include "hardware.h"
#include "message.h"
#include "card.h"
#include "scioc.h"
 
extern int indicate_status(int, int, unsigned long, char *);
extern int startproc(int);
extern int loadproc(int, char *record);
extern int reset(int);
extern int send_and_receive(int, unsigned int, unsigned char,unsigned char,
                unsigned char,unsigned char,
                unsigned char, unsigned char *, RspMessage *, int);
 
extern board *adapter[];
 
#if 0
static char *ChannelStates[] = { "Idle", "Ready", "Connecting", "Connected", "Disconnecting" };
#endif
 
int GetStatus(int card, boardInfo *);
 
/*
 * Process private IOCTL messages (typically from scctrl)
 */
int sc_ioctl(int card, scs_ioctl *data)
{
        switch(data->command) {
        case SCIOCRESET:        /* Perform a hard reset of the adapter */
        {
                pr_debug("%s: SCIOCRESET: ioctl received\n", adapter[card]->devicename);
                adapter[card]->StartOnReset = 0;
                return (reset(card));
        }
 
        case SCIOCLOAD:
        {
                RspMessage      rcvmsg;
                char            srec[SCIOC_SRECSIZE];
                int             status, err;
 
                pr_debug("%s: SCIOLOAD: ioctl received\n", adapter[card]->devicename);
                if(adapter[card]->EngineUp) {
                        pr_debug("%s: SCIOCLOAD: Command Failed, LoadProc while engine running.\n",
                                adapter[card]->devicename);
                        return -1;
                }
 
                /*
                 * Get the SRec from user space
                 */
                if ((err = copy_from_user(srec, (char *) data->dataptr, sizeof(srec))))
                        return err;
 
                status = send_and_receive(card, CMPID, cmReqType2, cmReqClass0, cmReqLoadProc,
                                0, sizeof(srec), srec, &rcvmsg, SAR_TIMEOUT);
                if(status) {
                        pr_debug("%s: SCIOCLOAD: Command Failed, status = %d\n",
                                adapter[card]->devicename, status);
                        return -1;
                }
                else {
                        pr_debug("%s: SCIOCLOAD: Command Sucessful\n", adapter[card]->devicename);
                        return 0;
                }
        }
 
        case SCIOCSTART:
        {
                pr_debug("%s: SCIOSTART: ioctl received\n", adapter[card]->devicename);
                if(adapter[card]->EngineUp) {
                        pr_debug("%s: SCIOCSTART: Command Failed, Engine already running.\n",
                                adapter[card]->devicename);
                        return -1;
                }
 
                adapter[card]->StartOnReset = 1;
                startproc(card);
                return 0;
        }
 
        case SCIOCSETSWITCH:
        {
                RspMessage      rcvmsg;
                char            switchtype;
                int             status, err;
 
                pr_debug("%s: SCIOSETSWITCH: ioctl received\n", adapter[card]->devicename);
 
                /*
                 * Get the switch type from user space
                 */
                if ((err = copy_from_user(&switchtype, (char *) data->dataptr, sizeof(char))))
                        return err;
 
                pr_debug("%s: SCIOCSETSWITCH: Setting switch type to %d\n", adapter[card]->devicename,
                        switchtype);
                status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallSetSwitchType,
                                                0, sizeof(char),&switchtype,&rcvmsg, SAR_TIMEOUT);
                if(!status && !rcvmsg.rsp_status) {
                        pr_debug("%s: SCIOCSETSWITCH: Command Successful\n", adapter[card]->devicename);
                        return 0;
                }
                else {
                        pr_debug("%s: SCIOCSETSWITCH: Command Failed (status = %d)\n",
                                adapter[card]->devicename, status);
                        return status;
                }
        }
 
        case SCIOCGETSWITCH:
        {
                RspMessage      rcvmsg;
                char            switchtype;
                int             status, err;
 
                pr_debug("%s: SCIOGETSWITCH: ioctl received\n", adapter[card]->devicename);
 
                /*
                 * Get the switch type from the board
                 */
                status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
                        ceReqCallGetSwitchType, 0, 0, 0, &rcvmsg, SAR_TIMEOUT);
                if (!status && !rcvmsg.rsp_status) {
                        pr_debug("%s: SCIOCGETSWITCH: Command Sucessful\n", adapter[card]->devicename);
                }
                else {
                        pr_debug("%s: SCIOCGETSWITCH: Command Failed (status = %d)\n",
                                adapter[card]->devicename, status);
                        return status;
                }
 
                switchtype = rcvmsg.msg_data.byte_array[0];
 
                /*
                 * Package the switch type and send to user space
                 */
                if ((err = copy_to_user((char *) data->dataptr, &switchtype, sizeof(char))))
                        return err;
 
                return 0;
        }
 
        case SCIOCGETSPID:
        {
                RspMessage      rcvmsg;
                char            spid[SCIOC_SPIDSIZE];
                int             status, err;
 
                pr_debug("%s: SCIOGETSPID: ioctl received\n", adapter[card]->devicename);
 
                /*
                 * Get the spid from the board
                 */
                status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetSPID,
                                        data->channel, 0, 0, &rcvmsg, SAR_TIMEOUT);
                if (!status) {
                        pr_debug("%s: SCIOCGETSPID: Command Sucessful\n", adapter[card]->devicename);
                }
                else {
                        pr_debug("%s: SCIOCGETSPID: Command Failed (status = %d)\n",
                                adapter[card]->devicename, status);
                        return status;
                }
                strcpy(spid, rcvmsg.msg_data.byte_array);
 
                /*
                 * Package the switch type and send to user space
                 */
                if ((err = copy_to_user((char *) data->dataptr, spid, sizeof(spid))))
                        return err;
 
                return 0;
        }
 
        case SCIOCSETSPID:
        {
                RspMessage      rcvmsg;
                char            spid[SCIOC_SPIDSIZE];
                int             status, err;
 
                pr_debug("%s: DCBIOSETSPID: ioctl received\n", adapter[card]->devicename);
 
                /*
                 * Get the spid from user space
                 */
                if ((err = copy_from_user(spid, (char *) data->dataptr, sizeof(spid))))
                        return err;
 
                pr_debug("%s: SCIOCSETSPID: Setting channel %d spid to %s\n",
                        adapter[card]->devicename, data->channel, spid);
                status = send_and_receive(card, CEPID, ceReqTypeCall,
                        ceReqClass0, ceReqCallSetSPID, data->channel,
                        strlen(spid), spid, &rcvmsg, SAR_TIMEOUT);
                if(!status && !rcvmsg.rsp_status) {
                        pr_debug("%s: SCIOCSETSPID: Command Successful\n",
                                adapter[card]->devicename);
                        return 0;
                }
                else {
                        pr_debug("%s: SCIOCSETSPID: Command Failed (status = %d)\n",
                                adapter[card]->devicename, status);
                        return status;
                }
        }
 
        case SCIOCGETDN:
        {
                RspMessage      rcvmsg;
                char            dn[SCIOC_DNSIZE];
                int             status, err;
 
                pr_debug("%s: SCIOGETDN: ioctl received\n", adapter[card]->devicename);
 
                /*
                 * Get the dn from the board
                 */
                status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetMyNumber,
                                        data->channel, 0, 0, &rcvmsg, SAR_TIMEOUT);
                if (!status) {
                        pr_debug("%s: SCIOCGETDN: Command Sucessful\n", adapter[card]->devicename);
                }
                else {
                        pr_debug("%s: SCIOCGETDN: Command Failed (status = %d)\n",
                                adapter[card]->devicename, status);
                        return status;
                }
 
                strcpy(dn, rcvmsg.msg_data.byte_array);
 
                /*
                 * Package the dn and send to user space
                 */
                if ((err = copy_to_user((char *) data->dataptr, dn, sizeof(dn))))
                        return err;
 
                return 0;
        }
 
        case SCIOCSETDN:
        {
                RspMessage      rcvmsg;
                char            dn[SCIOC_DNSIZE];
                int             status, err;
 
                pr_debug("%s: SCIOSETDN: ioctl received\n", adapter[card]->devicename);
 
                /*
                 * Get the spid from user space
                 */
                if ((err = copy_from_user(dn, (char *) data->dataptr, sizeof(dn))))
                        return err;
 
                pr_debug("%s: SCIOCSETDN: Setting channel %d dn to %s\n",
                        adapter[card]->devicename, data->channel, dn);
                status = send_and_receive(card, CEPID, ceReqTypeCall,
                        ceReqClass0, ceReqCallSetMyNumber, data->channel,
                        strlen(dn),dn,&rcvmsg, SAR_TIMEOUT);
                if(!status && !rcvmsg.rsp_status) {
                        pr_debug("%s: SCIOCSETDN: Command Successful\n",
                                adapter[card]->devicename);
                        return 0;
                }
                else {
                        pr_debug("%s: SCIOCSETDN: Command Failed (status = %d)\n",
                                adapter[card]->devicename, status);
                        return status;
                }
        }
 
        case SCIOCTRACE:
 
                pr_debug("%s: SCIOTRACE: ioctl received\n", adapter[card]->devicename);
/*              adapter[card]->trace = !adapter[card]->trace;
                pr_debug("%s: SCIOCTRACE: Tracing turned %s\n", adapter[card]->devicename,
                        adapter[card]->trace ? "ON" : "OFF"); */
                break;
 
        case SCIOCSTAT:
        {
                boardInfo bi;
                int err;
 
                pr_debug("%s: SCIOSTAT: ioctl received\n", adapter[card]->devicename);
                GetStatus(card, &bi);
 
                if ((err = copy_to_user((boardInfo *) data->dataptr, &bi, sizeof(boardInfo))))
                        return err;
 
                return 0;
        }
 
        case SCIOCGETSPEED:
        {
                RspMessage      rcvmsg;
                char            speed;
                int             status, err;
 
                pr_debug("%s: SCIOGETSPEED: ioctl received\n", adapter[card]->devicename);
 
                /*
                 * Get the speed from the board
                 */
                status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
                        ceReqCallGetCallType, data->channel, 0, 0, &rcvmsg, SAR_TIMEOUT);
                if (!status && !rcvmsg.rsp_status) {
                        pr_debug("%s: SCIOCGETSPEED: Command Sucessful\n",
                                adapter[card]->devicename);
                }
                else {
                        pr_debug("%s: SCIOCGETSPEED: Command Failed (status = %d)\n",
                                adapter[card]->devicename, status);
                        return status;
                }
 
                speed = rcvmsg.msg_data.byte_array[0];
 
                /*
                 * Package the switch type and send to user space
                 */
                if ((err = copy_to_user((char *) data->dataptr, &speed, sizeof(char))))
                        return err;
 
                return 0;
        }
 
        case SCIOCSETSPEED:
                pr_debug("%s: SCIOCSETSPEED: ioctl received\n", adapter[card]->devicename);
                break;
 
        case SCIOCLOOPTST:
                pr_debug("%s: SCIOCLOOPTST: ioctl received\n", adapter[card]->devicename);
                break;
 
        default:
                return -1;
        }
 
        return 0;
}
 
int GetStatus(int card, boardInfo *bi)
{
        RspMessage rcvmsg;
        int i, status;
 
        /*
         * Fill in some of the basic info about the board
         */
        bi->modelid = adapter[card]->model;
        strcpy(bi->serial_no, adapter[card]->hwconfig.serial_no);
        strcpy(bi->part_no, adapter[card]->hwconfig.part_no);
        bi->iobase = adapter[card]->iobase;
        bi->rambase = adapter[card]->rambase;
        bi->irq = adapter[card]->interrupt;
        bi->ramsize = adapter[card]->hwconfig.ram_size;
        bi->interface = adapter[card]->hwconfig.st_u_sense;
        strcpy(bi->load_ver, adapter[card]->load_ver);
        strcpy(bi->proc_ver, adapter[card]->proc_ver);
 
        /*
         * Get the current PhyStats and LnkStats
         */
        status = send_and_receive(card, CEPID, ceReqTypePhy, ceReqClass2,
                ceReqPhyStatus, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
        if(!status) {
                if(adapter[card]->model < PRI_BOARD) {
                        bi->l1_status = rcvmsg.msg_data.byte_array[2];
                        for(i = 0 ; i < BRI_CHANNELS ; i++)
                                bi->status.bristats[i].phy_stat =
                                        rcvmsg.msg_data.byte_array[i];
                }
                else {
                        bi->l1_status = rcvmsg.msg_data.byte_array[0];
                        bi->l2_status = rcvmsg.msg_data.byte_array[1];
                        for(i = 0 ; i < PRI_CHANNELS ; i++)
                                bi->status.pristats[i].phy_stat =
                                        rcvmsg.msg_data.byte_array[i+2];
                }
        }
 
        /*
         * Get the call types for each channel
         */
        for (i = 0 ; i < adapter[card]->nChannels ; i++) {
                status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
                        ceReqCallGetCallType, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
                if(!status) {
                        if (adapter[card]->model == PRI_BOARD) {
                                bi->status.pristats[i].call_type =
                                        rcvmsg.msg_data.byte_array[0];
                        }
                        else {
                                bi->status.bristats[i].call_type =
                                        rcvmsg.msg_data.byte_array[0];
                        }
                }
        }
 
        /*
         * If PRI, get the call states and service states for each channel
         */
        if (adapter[card]->model == PRI_BOARD) {
                /*
                 * Get the call states
                 */
                status = send_and_receive(card, CEPID, ceReqTypeStat, ceReqClass2,
                        ceReqPhyChCallState, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
                if(!status) {
                        for( i = 0 ; i < PRI_CHANNELS ; i++ )
                                bi->status.pristats[i].call_state =
                                        rcvmsg.msg_data.byte_array[i];
                }
 
                /*
                 * Get the service states
                 */
                status = send_and_receive(card, CEPID, ceReqTypeStat, ceReqClass2,
                        ceReqPhyChServState, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
                if(!status) {
                        for( i = 0 ; i < PRI_CHANNELS ; i++ )
                                bi->status.pristats[i].serv_state =
                                        rcvmsg.msg_data.byte_array[i];
                }
 
                /*
                 * Get the link stats for the channels
                 */
                for (i = 1 ; i <= PRI_CHANNELS ; i++) {
                        status = send_and_receive(card, CEPID, ceReqTypeLnk, ceReqClass0,
                                ceReqLnkGetStats, i, 0, NULL, &rcvmsg, SAR_TIMEOUT);
                        if (!status) {
                                bi->status.pristats[i-1].link_stats.tx_good =
                                        (unsigned long)rcvmsg.msg_data.byte_array[0];
                                bi->status.pristats[i-1].link_stats.tx_bad =
                                        (unsigned long)rcvmsg.msg_data.byte_array[4];
                                bi->status.pristats[i-1].link_stats.rx_good =
                                        (unsigned long)rcvmsg.msg_data.byte_array[8];
                                bi->status.pristats[i-1].link_stats.rx_bad =
                                        (unsigned long)rcvmsg.msg_data.byte_array[12];
                        }
                }
 
                /*
                 * Link stats for the D channel
                 */
                status = send_and_receive(card, CEPID, ceReqTypeLnk, ceReqClass0,
                        ceReqLnkGetStats, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
                if (!status) {
                        bi->dch_stats.tx_good = (unsigned long)rcvmsg.msg_data.byte_array[0];
                        bi->dch_stats.tx_bad = (unsigned long)rcvmsg.msg_data.byte_array[4];
                        bi->dch_stats.rx_good = (unsigned long)rcvmsg.msg_data.byte_array[8];
                        bi->dch_stats.rx_bad = (unsigned long)rcvmsg.msg_data.byte_array[12];
                }
 
                return 0;
        }
 
        /*
         * If BRI or POTS, Get SPID, DN and call types for each channel
         */
 
        /*
         * Get the link stats for the channels
         */
        status = send_and_receive(card, CEPID, ceReqTypeLnk, ceReqClass0,
                ceReqLnkGetStats, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);
        if (!status) {
                bi->dch_stats.tx_good = (unsigned long)rcvmsg.msg_data.byte_array[0];
                bi->dch_stats.tx_bad = (unsigned long)rcvmsg.msg_data.byte_array[4];
                bi->dch_stats.rx_good = (unsigned long)rcvmsg.msg_data.byte_array[8];
                bi->dch_stats.rx_bad = (unsigned long)rcvmsg.msg_data.byte_array[12];
                bi->status.bristats[0].link_stats.tx_good =
                        (unsigned long)rcvmsg.msg_data.byte_array[16];
                bi->status.bristats[0].link_stats.tx_bad =
                        (unsigned long)rcvmsg.msg_data.byte_array[20];
                bi->status.bristats[0].link_stats.rx_good =
                        (unsigned long)rcvmsg.msg_data.byte_array[24];
                bi->status.bristats[0].link_stats.rx_bad =
                        (unsigned long)rcvmsg.msg_data.byte_array[28];
                bi->status.bristats[1].link_stats.tx_good =
                        (unsigned long)rcvmsg.msg_data.byte_array[32];
                bi->status.bristats[1].link_stats.tx_bad =
                        (unsigned long)rcvmsg.msg_data.byte_array[36];
                bi->status.bristats[1].link_stats.rx_good =
                        (unsigned long)rcvmsg.msg_data.byte_array[40];
                bi->status.bristats[1].link_stats.rx_bad =
                        (unsigned long)rcvmsg.msg_data.byte_array[44];
        }
 
        /*
         * Get the SPIDs
         */
        for (i = 0 ; i < BRI_CHANNELS ; i++) {
                status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
                        ceReqCallGetSPID, i+1, 0, NULL, &rcvmsg, SAR_TIMEOUT);
                if (!status)
                        strcpy(bi->status.bristats[i].spid, rcvmsg.msg_data.byte_array);
        }
 
        /*
         * Get the DNs
         */
        for (i = 0 ; i < BRI_CHANNELS ; i++) {
                status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,
                        ceReqCallGetMyNumber, i+1, 0, NULL, &rcvmsg, SAR_TIMEOUT);
                if (!status)
                        strcpy(bi->status.bristats[i].dn, rcvmsg.msg_data.byte_array);
        }
 
        return 0;
}

Browse

Tools

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [uclinux/] [uClinux-2.0.x/] [drivers/] [isdn/] [sc/] [ioctl.c] - Blame information for rev 1782

Line No.	Rev	Author	Line
1	199	simons	`#define __NO_VERSION__`
2			`#include "includes.h"`
3			`#include "hardware.h"`
4			`#include "message.h"`
5			`#include "card.h"`
6			`#include "scioc.h"`
7
8			`extern int indicate_status(int, int, unsigned long, char *);`
9			`extern int startproc(int);`
10			`extern int loadproc(int, char *record);`
11			`extern int reset(int);`
12			`extern int send_and_receive(int, unsigned int, unsigned char,unsigned char,`
13			`unsigned char,unsigned char,`
14			`unsigned char, unsigned char , RspMessage , int);`
15
16			`extern board *adapter[];`
17
18			`#if 0`
19			`static char *ChannelStates[] = { "Idle", "Ready", "Connecting", "Connected", "Disconnecting" };`
20			`#endif`
21
22			`int GetStatus(int card, boardInfo *);`
23
24			`/*`
25			`* Process private IOCTL messages (typically from scctrl)`
26			`*/`
27			`int sc_ioctl(int card, scs_ioctl *data)`
28			`{`
29			`switch(data->command) {`
30			`case SCIOCRESET: /* Perform a hard reset of the adapter */`
31			`{`
32			`pr_debug("%s: SCIOCRESET: ioctl received\n", adapter[card]->devicename);`
33			`adapter[card]->StartOnReset = 0;`
34			`return (reset(card));`
35			`}`
36
37			`case SCIOCLOAD:`
38			`{`
39			`RspMessage rcvmsg;`
40			`char srec[SCIOC_SRECSIZE];`
41			`int status, err;`
42
43			`pr_debug("%s: SCIOLOAD: ioctl received\n", adapter[card]->devicename);`
44			`if(adapter[card]->EngineUp) {`
45			`pr_debug("%s: SCIOCLOAD: Command Failed, LoadProc while engine running.\n",`
46			`adapter[card]->devicename);`
47			`return -1;`
48			`}`
49
50			`/*`
51			`* Get the SRec from user space`
52			`*/`
53			`if ((err = copy_from_user(srec, (char *) data->dataptr, sizeof(srec))))`
54			`return err;`
55
56			`status = send_and_receive(card, CMPID, cmReqType2, cmReqClass0, cmReqLoadProc,`
57			`0, sizeof(srec), srec, &rcvmsg, SAR_TIMEOUT);`
58			`if(status) {`
59			`pr_debug("%s: SCIOCLOAD: Command Failed, status = %d\n",`
60			`adapter[card]->devicename, status);`
61			`return -1;`
62			`}`
63			`else {`
64			`pr_debug("%s: SCIOCLOAD: Command Sucessful\n", adapter[card]->devicename);`
65			`return 0;`
66			`}`
67			`}`
68
69			`case SCIOCSTART:`
70			`{`
71			`pr_debug("%s: SCIOSTART: ioctl received\n", adapter[card]->devicename);`
72			`if(adapter[card]->EngineUp) {`
73			`pr_debug("%s: SCIOCSTART: Command Failed, Engine already running.\n",`
74			`adapter[card]->devicename);`
75			`return -1;`
76			`}`
77
78			`adapter[card]->StartOnReset = 1;`
79			`startproc(card);`
80			`return 0;`
81			`}`
82
83			`case SCIOCSETSWITCH:`
84			`{`
85			`RspMessage rcvmsg;`
86			`char switchtype;`
87			`int status, err;`
88
89			`pr_debug("%s: SCIOSETSWITCH: ioctl received\n", adapter[card]->devicename);`
90
91			`/*`
92			`* Get the switch type from user space`
93			`*/`
94			`if ((err = copy_from_user(&switchtype, (char *) data->dataptr, sizeof(char))))`
95			`return err;`
96
97			`pr_debug("%s: SCIOCSETSWITCH: Setting switch type to %d\n", adapter[card]->devicename,`
98			`switchtype);`
99			`status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallSetSwitchType,`
100			`0, sizeof(char),&switchtype,&rcvmsg, SAR_TIMEOUT);`
101			`if(!status && !rcvmsg.rsp_status) {`
102			`pr_debug("%s: SCIOCSETSWITCH: Command Successful\n", adapter[card]->devicename);`
103			`return 0;`
104			`}`
105			`else {`
106			`pr_debug("%s: SCIOCSETSWITCH: Command Failed (status = %d)\n",`
107			`adapter[card]->devicename, status);`
108			`return status;`
109			`}`
110			`}`
111
112			`case SCIOCGETSWITCH:`
113			`{`
114			`RspMessage rcvmsg;`
115			`char switchtype;`
116			`int status, err;`
117
118			`pr_debug("%s: SCIOGETSWITCH: ioctl received\n", adapter[card]->devicename);`
119
120			`/*`
121			`* Get the switch type from the board`
122			`*/`
123			`status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,`
124			`ceReqCallGetSwitchType, 0, 0, 0, &rcvmsg, SAR_TIMEOUT);`
125			`if (!status && !rcvmsg.rsp_status) {`
126			`pr_debug("%s: SCIOCGETSWITCH: Command Sucessful\n", adapter[card]->devicename);`
127			`}`
128			`else {`
129			`pr_debug("%s: SCIOCGETSWITCH: Command Failed (status = %d)\n",`
130			`adapter[card]->devicename, status);`
131			`return status;`
132			`}`
133
134			`switchtype = rcvmsg.msg_data.byte_array[0];`
135
136			`/*`
137			`* Package the switch type and send to user space`
138			`*/`
139			`if ((err = copy_to_user((char *) data->dataptr, &switchtype, sizeof(char))))`
140			`return err;`
141
142			`return 0;`
143			`}`
144
145			`case SCIOCGETSPID:`
146			`{`
147			`RspMessage rcvmsg;`
148			`char spid[SCIOC_SPIDSIZE];`
149			`int status, err;`
150
151			`pr_debug("%s: SCIOGETSPID: ioctl received\n", adapter[card]->devicename);`
152
153			`/*`
154			`* Get the spid from the board`
155			`*/`
156			`status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetSPID,`
157			`data->channel, 0, 0, &rcvmsg, SAR_TIMEOUT);`
158			`if (!status) {`
159			`pr_debug("%s: SCIOCGETSPID: Command Sucessful\n", adapter[card]->devicename);`
160			`}`
161			`else {`
162			`pr_debug("%s: SCIOCGETSPID: Command Failed (status = %d)\n",`
163			`adapter[card]->devicename, status);`
164			`return status;`
165			`}`
166			`strcpy(spid, rcvmsg.msg_data.byte_array);`
167
168			`/*`
169			`* Package the switch type and send to user space`
170			`*/`
171			`if ((err = copy_to_user((char *) data->dataptr, spid, sizeof(spid))))`
172			`return err;`
173
174			`return 0;`
175			`}`
176
177			`case SCIOCSETSPID:`
178			`{`
179			`RspMessage rcvmsg;`
180			`char spid[SCIOC_SPIDSIZE];`
181			`int status, err;`
182
183			`pr_debug("%s: DCBIOSETSPID: ioctl received\n", adapter[card]->devicename);`
184
185			`/*`
186			`* Get the spid from user space`
187			`*/`
188			`if ((err = copy_from_user(spid, (char *) data->dataptr, sizeof(spid))))`
189			`return err;`
190
191			`pr_debug("%s: SCIOCSETSPID: Setting channel %d spid to %s\n",`
192			`adapter[card]->devicename, data->channel, spid);`
193			`status = send_and_receive(card, CEPID, ceReqTypeCall,`
194			`ceReqClass0, ceReqCallSetSPID, data->channel,`
195			`strlen(spid), spid, &rcvmsg, SAR_TIMEOUT);`
196			`if(!status && !rcvmsg.rsp_status) {`
197			`pr_debug("%s: SCIOCSETSPID: Command Successful\n",`
198			`adapter[card]->devicename);`
199			`return 0;`
200			`}`
201			`else {`
202			`pr_debug("%s: SCIOCSETSPID: Command Failed (status = %d)\n",`
203			`adapter[card]->devicename, status);`
204			`return status;`
205			`}`
206			`}`
207
208			`case SCIOCGETDN:`
209			`{`
210			`RspMessage rcvmsg;`
211			`char dn[SCIOC_DNSIZE];`
212			`int status, err;`
213
214			`pr_debug("%s: SCIOGETDN: ioctl received\n", adapter[card]->devicename);`
215
216			`/*`
217			`* Get the dn from the board`
218			`*/`
219			`status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetMyNumber,`
220			`data->channel, 0, 0, &rcvmsg, SAR_TIMEOUT);`
221			`if (!status) {`
222			`pr_debug("%s: SCIOCGETDN: Command Sucessful\n", adapter[card]->devicename);`
223			`}`
224			`else {`
225			`pr_debug("%s: SCIOCGETDN: Command Failed (status = %d)\n",`
226			`adapter[card]->devicename, status);`
227			`return status;`
228			`}`
229
230			`strcpy(dn, rcvmsg.msg_data.byte_array);`
231
232			`/*`
233			`* Package the dn and send to user space`
234			`*/`
235			`if ((err = copy_to_user((char *) data->dataptr, dn, sizeof(dn))))`
236			`return err;`
237
238			`return 0;`
239			`}`
240
241			`case SCIOCSETDN:`
242			`{`
243			`RspMessage rcvmsg;`
244			`char dn[SCIOC_DNSIZE];`
245			`int status, err;`
246
247			`pr_debug("%s: SCIOSETDN: ioctl received\n", adapter[card]->devicename);`
248
249			`/*`
250			`* Get the spid from user space`
251			`*/`
252			`if ((err = copy_from_user(dn, (char *) data->dataptr, sizeof(dn))))`
253			`return err;`
254
255			`pr_debug("%s: SCIOCSETDN: Setting channel %d dn to %s\n",`
256			`adapter[card]->devicename, data->channel, dn);`
257			`status = send_and_receive(card, CEPID, ceReqTypeCall,`
258			`ceReqClass0, ceReqCallSetMyNumber, data->channel,`
259			`strlen(dn),dn,&rcvmsg, SAR_TIMEOUT);`
260			`if(!status && !rcvmsg.rsp_status) {`
261			`pr_debug("%s: SCIOCSETDN: Command Successful\n",`
262			`adapter[card]->devicename);`
263			`return 0;`
264			`}`
265			`else {`
266			`pr_debug("%s: SCIOCSETDN: Command Failed (status = %d)\n",`
267			`adapter[card]->devicename, status);`
268			`return status;`
269			`}`
270			`}`
271
272			`case SCIOCTRACE:`
273
274			`pr_debug("%s: SCIOTRACE: ioctl received\n", adapter[card]->devicename);`
275			`/* adapter[card]->trace = !adapter[card]->trace;`
276			`pr_debug("%s: SCIOCTRACE: Tracing turned %s\n", adapter[card]->devicename,`
277			`adapter[card]->trace ? "ON" : "OFF"); */`
278			`break;`
279
280			`case SCIOCSTAT:`
281			`{`
282			`boardInfo bi;`
283			`int err;`
284
285			`pr_debug("%s: SCIOSTAT: ioctl received\n", adapter[card]->devicename);`
286			`GetStatus(card, &bi);`
287
288			`if ((err = copy_to_user((boardInfo *) data->dataptr, &bi, sizeof(boardInfo))))`
289			`return err;`
290
291			`return 0;`
292			`}`
293
294			`case SCIOCGETSPEED:`
295			`{`
296			`RspMessage rcvmsg;`
297			`char speed;`
298			`int status, err;`
299
300			`pr_debug("%s: SCIOGETSPEED: ioctl received\n", adapter[card]->devicename);`
301
302			`/*`
303			`* Get the speed from the board`
304			`*/`
305			`status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,`
306			`ceReqCallGetCallType, data->channel, 0, 0, &rcvmsg, SAR_TIMEOUT);`
307			`if (!status && !rcvmsg.rsp_status) {`
308			`pr_debug("%s: SCIOCGETSPEED: Command Sucessful\n",`
309			`adapter[card]->devicename);`
310			`}`
311			`else {`
312			`pr_debug("%s: SCIOCGETSPEED: Command Failed (status = %d)\n",`
313			`adapter[card]->devicename, status);`
314			`return status;`
315			`}`
316
317			`speed = rcvmsg.msg_data.byte_array[0];`
318
319			`/*`
320			`* Package the switch type and send to user space`
321			`*/`
322			`if ((err = copy_to_user((char *) data->dataptr, &speed, sizeof(char))))`
323			`return err;`
324
325			`return 0;`
326			`}`
327
328			`case SCIOCSETSPEED:`
329			`pr_debug("%s: SCIOCSETSPEED: ioctl received\n", adapter[card]->devicename);`
330			`break;`
331
332			`case SCIOCLOOPTST:`
333			`pr_debug("%s: SCIOCLOOPTST: ioctl received\n", adapter[card]->devicename);`
334			`break;`
335
336			`default:`
337			`return -1;`
338			`}`
339
340			`return 0;`
341			`}`
342
343			`int GetStatus(int card, boardInfo *bi)`
344			`{`
345			`RspMessage rcvmsg;`
346			`int i, status;`
347
348			`/*`
349			`* Fill in some of the basic info about the board`
350			`*/`
351			`bi->modelid = adapter[card]->model;`
352			`strcpy(bi->serial_no, adapter[card]->hwconfig.serial_no);`
353			`strcpy(bi->part_no, adapter[card]->hwconfig.part_no);`
354			`bi->iobase = adapter[card]->iobase;`
355			`bi->rambase = adapter[card]->rambase;`
356			`bi->irq = adapter[card]->interrupt;`
357			`bi->ramsize = adapter[card]->hwconfig.ram_size;`
358			`bi->interface = adapter[card]->hwconfig.st_u_sense;`
359			`strcpy(bi->load_ver, adapter[card]->load_ver);`
360			`strcpy(bi->proc_ver, adapter[card]->proc_ver);`
361
362			`/*`
363			`* Get the current PhyStats and LnkStats`
364			`*/`
365			`status = send_and_receive(card, CEPID, ceReqTypePhy, ceReqClass2,`
366			`ceReqPhyStatus, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);`
367			`if(!status) {`
368			`if(adapter[card]->model < PRI_BOARD) {`
369			`bi->l1_status = rcvmsg.msg_data.byte_array[2];`
370			`for(i = 0 ; i < BRI_CHANNELS ; i++)`
371			`bi->status.bristats[i].phy_stat =`
372			`rcvmsg.msg_data.byte_array[i];`
373			`}`
374			`else {`
375			`bi->l1_status = rcvmsg.msg_data.byte_array[0];`
376			`bi->l2_status = rcvmsg.msg_data.byte_array[1];`
377			`for(i = 0 ; i < PRI_CHANNELS ; i++)`
378			`bi->status.pristats[i].phy_stat =`
379			`rcvmsg.msg_data.byte_array[i+2];`
380			`}`
381			`}`
382
383			`/*`
384			`* Get the call types for each channel`
385			`*/`
386			`for (i = 0 ; i < adapter[card]->nChannels ; i++) {`
387			`status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,`
388			`ceReqCallGetCallType, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);`
389			`if(!status) {`
390			`if (adapter[card]->model == PRI_BOARD) {`
391			`bi->status.pristats[i].call_type =`
392			`rcvmsg.msg_data.byte_array[0];`
393			`}`
394			`else {`
395			`bi->status.bristats[i].call_type =`
396			`rcvmsg.msg_data.byte_array[0];`
397			`}`
398			`}`
399			`}`
400
401			`/*`
402			`* If PRI, get the call states and service states for each channel`
403			`*/`
404			`if (adapter[card]->model == PRI_BOARD) {`
405			`/*`
406			`* Get the call states`
407			`*/`
408			`status = send_and_receive(card, CEPID, ceReqTypeStat, ceReqClass2,`
409			`ceReqPhyChCallState, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);`
410			`if(!status) {`
411			`for( i = 0 ; i < PRI_CHANNELS ; i++ )`
412			`bi->status.pristats[i].call_state =`
413			`rcvmsg.msg_data.byte_array[i];`
414			`}`
415
416			`/*`
417			`* Get the service states`
418			`*/`
419			`status = send_and_receive(card, CEPID, ceReqTypeStat, ceReqClass2,`
420			`ceReqPhyChServState, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);`
421			`if(!status) {`
422			`for( i = 0 ; i < PRI_CHANNELS ; i++ )`
423			`bi->status.pristats[i].serv_state =`
424			`rcvmsg.msg_data.byte_array[i];`
425			`}`
426
427			`/*`
428			`* Get the link stats for the channels`
429			`*/`
430			`for (i = 1 ; i <= PRI_CHANNELS ; i++) {`
431			`status = send_and_receive(card, CEPID, ceReqTypeLnk, ceReqClass0,`
432			`ceReqLnkGetStats, i, 0, NULL, &rcvmsg, SAR_TIMEOUT);`
433			`if (!status) {`
434			`bi->status.pristats[i-1].link_stats.tx_good =`
435			`(unsigned long)rcvmsg.msg_data.byte_array[0];`
436			`bi->status.pristats[i-1].link_stats.tx_bad =`
437			`(unsigned long)rcvmsg.msg_data.byte_array[4];`
438			`bi->status.pristats[i-1].link_stats.rx_good =`
439			`(unsigned long)rcvmsg.msg_data.byte_array[8];`
440			`bi->status.pristats[i-1].link_stats.rx_bad =`
441			`(unsigned long)rcvmsg.msg_data.byte_array[12];`
442			`}`
443			`}`
444
445			`/*`
446			`* Link stats for the D channel`
447			`*/`
448			`status = send_and_receive(card, CEPID, ceReqTypeLnk, ceReqClass0,`
449			`ceReqLnkGetStats, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);`
450			`if (!status) {`
451			`bi->dch_stats.tx_good = (unsigned long)rcvmsg.msg_data.byte_array[0];`
452			`bi->dch_stats.tx_bad = (unsigned long)rcvmsg.msg_data.byte_array[4];`
453			`bi->dch_stats.rx_good = (unsigned long)rcvmsg.msg_data.byte_array[8];`
454			`bi->dch_stats.rx_bad = (unsigned long)rcvmsg.msg_data.byte_array[12];`
455			`}`
456
457			`return 0;`
458			`}`
459
460			`/*`
461			`* If BRI or POTS, Get SPID, DN and call types for each channel`
462			`*/`
463
464			`/*`
465			`* Get the link stats for the channels`
466			`*/`
467			`status = send_and_receive(card, CEPID, ceReqTypeLnk, ceReqClass0,`
468			`ceReqLnkGetStats, 0, 0, NULL, &rcvmsg, SAR_TIMEOUT);`
469			`if (!status) {`
470			`bi->dch_stats.tx_good = (unsigned long)rcvmsg.msg_data.byte_array[0];`
471			`bi->dch_stats.tx_bad = (unsigned long)rcvmsg.msg_data.byte_array[4];`
472			`bi->dch_stats.rx_good = (unsigned long)rcvmsg.msg_data.byte_array[8];`
473			`bi->dch_stats.rx_bad = (unsigned long)rcvmsg.msg_data.byte_array[12];`
474			`bi->status.bristats[0].link_stats.tx_good =`
475			`(unsigned long)rcvmsg.msg_data.byte_array[16];`
476			`bi->status.bristats[0].link_stats.tx_bad =`
477			`(unsigned long)rcvmsg.msg_data.byte_array[20];`
478			`bi->status.bristats[0].link_stats.rx_good =`
479			`(unsigned long)rcvmsg.msg_data.byte_array[24];`
480			`bi->status.bristats[0].link_stats.rx_bad =`
481			`(unsigned long)rcvmsg.msg_data.byte_array[28];`
482			`bi->status.bristats[1].link_stats.tx_good =`
483			`(unsigned long)rcvmsg.msg_data.byte_array[32];`
484			`bi->status.bristats[1].link_stats.tx_bad =`
485			`(unsigned long)rcvmsg.msg_data.byte_array[36];`
486			`bi->status.bristats[1].link_stats.rx_good =`
487			`(unsigned long)rcvmsg.msg_data.byte_array[40];`
488			`bi->status.bristats[1].link_stats.rx_bad =`
489			`(unsigned long)rcvmsg.msg_data.byte_array[44];`
490			`}`
491
492			`/*`
493			`* Get the SPIDs`
494			`*/`
495			`for (i = 0 ; i < BRI_CHANNELS ; i++) {`
496			`status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,`
497			`ceReqCallGetSPID, i+1, 0, NULL, &rcvmsg, SAR_TIMEOUT);`
498			`if (!status)`
499			`strcpy(bi->status.bristats[i].spid, rcvmsg.msg_data.byte_array);`
500			`}`
501
502			`/*`
503			`* Get the DNs`
504			`*/`
505			`for (i = 0 ; i < BRI_CHANNELS ; i++) {`
506			`status = send_and_receive(card, CEPID, ceReqTypeCall, ceReqClass0,`
507			`ceReqCallGetMyNumber, i+1, 0, NULL, &rcvmsg, SAR_TIMEOUT);`
508			`if (!status)`
509			`strcpy(bi->status.bristats[i].dn, rcvmsg.msg_data.byte_array);`
510			`}`
511
512			`return 0;`
513			`}`