URL https://opencores.org/ocsvn/or1k_old/or1k_old/trunk
Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [uclinux/] [uClinux-2.0.x/] [drivers/] [net/] [sdla.c] - Blame information for rev 1782

Details | Compare with Previous | View Log

/*
 * SDLA         An implementation of a driver for the Sangoma S502/S508 series
 *              multi-protocol PC interface card.  Initial offering is with
 *              the DLCI driver, providing Frame Relay support for linux.
 *
 *              Global definitions for the Frame relay interface.
 *
 * Version:     @(#)sdla.c   0.30       12 Sep 1996
 *
 * Credits:     Sangoma Technologies, for the use of 2 cards for an extended
 *                      period of time.
 *              David Mandelstam <dm@sangoma.com> for getting me started on
 *                      this project, and incentive to complete it.
 *              Gene Kozen <74604.152@compuserve.com> for providing me with
 *                      important information about the cards.
 *
 * Author:      Mike McLagan <mike.mclagan@linux.org>
 *
 * Changes:
 *              0.15    Mike McLagan    Improved error handling, packet dropping
 *              0.20    Mike McLagan    New transmit/receive flags for config
 *                                      If in FR mode, don't accept packets from
 *                                      non DLCI devices.
 *              0.25    Mike McLagan    Fixed problem with rejecting packets
 *                                      from non DLCI devices.
 *              0.30    Mike McLagan    Fixed kernel panic when used with modified
 *                                      ifconfig
 *
 *              This program is free software; you can redistribute it and/or
 *              modify it under the terms of the GNU General Public License
 *              as published by the Free Software Foundation; either version
 *              2 of the License, or (at your option) any later version.
 */
 
#include <linux/config.h>
#include <linux/module.h>
 
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <linux/malloc.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/errno.h>
 
#include <asm/system.h>
#include <asm/bitops.h>
#include <asm/io.h>
#include <asm/dma.h>
 
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/if_frad.h>
 
#include <linux/sdla.h>
 
static const char* version = "SDLA driver v0.30, 12 Sep 1996, mike.mclagan@linux.org";
 
static const char* devname = "sdla";
 
static unsigned int valid_port[] = { 0x250, 0x270, 0x280, 0x300, 0x350, 0x360, 0x380, 0x390};
 
static unsigned int valid_mem[]  = {0xA0000, 0xA2000, 0xA4000, 0xA6000, 0xA8000, 0xAA000, 0xAC000, 0xAE000,
                                    0xB0000, 0xB2000, 0xB4000, 0xB6000, 0xB8000, 0xBA000, 0xBC000, 0xBE000,
                                    0xC0000, 0xC2000, 0xC4000, 0xC6000, 0xC8000, 0xCA000, 0xCC000, 0xCE000,
                                    0xD0000, 0xD2000, 0xD4000, 0xD6000, 0xD8000, 0xDA000, 0xDC000, 0xDE000,
                                    0xE0000, 0xE2000, 0xE4000, 0xE6000, 0xE8000, 0xEA000, 0xEC000, 0xEE000};
 
/*********************************************************
 *
 * these are the core routines that access the card itself
 *
 *********************************************************/
 
#define SDLA_WINDOW(dev,addr) outb((((addr) >> 13) & 0x1F), (dev)->base_addr + SDLA_REG_Z80_WINDOW)
 
static void sdla_read(struct device *dev, int addr, void *buf, short len)
{
   unsigned long flags;
   char          *temp, *base;
   int           offset, bytes;
 
   temp = buf;
   while(len)
   {
      offset = addr & SDLA_ADDR_MASK;
      bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len;
      base = (void *) (dev->mem_start + offset);
 
      save_flags(flags);
      cli();
      SDLA_WINDOW(dev, addr);
      memcpy(temp, base, bytes);
      restore_flags(flags);
 
      addr += bytes;
      temp += bytes;
      len  -= bytes;
   }
}
 
static void sdla_write(struct device *dev, int addr, void *buf, short len)
{
   unsigned long flags;
   char          *temp, *base;
   int           offset, bytes;
 
   temp = buf;
   while(len)
   {
      offset = addr & SDLA_ADDR_MASK;
      bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len;
      base = (void *) (dev->mem_start + offset);
 
      save_flags(flags);
      cli();
      SDLA_WINDOW(dev, addr);
      memcpy(base, temp, bytes);
      restore_flags(flags);
 
      addr += bytes;
      temp += bytes;
      len  -= bytes;
   }
}
 
static void sdla_clear(struct device *dev)
{
   unsigned long flags;
   char          *base;
   int           len, addr, bytes;
 
   len = 65536;
   addr = 0;
   bytes = SDLA_WINDOW_SIZE;
   base = (void *) dev->mem_start;
 
   save_flags(flags);
   cli();
   while(len)
   {
      SDLA_WINDOW(dev, addr);
      memset(base, 0, bytes);
 
      addr += bytes;
      len  -= bytes;
   }
   restore_flags(flags);
}
 
static char sdla_byte(struct device *dev, int addr)
{
   unsigned long flags;
   char          byte, *temp;
 
   temp = (void *) (dev->mem_start + (addr & SDLA_ADDR_MASK));
 
   save_flags(flags);
   cli();
   SDLA_WINDOW(dev, addr);
   byte = *temp;
   restore_flags(flags);
 
   return(byte);
}
 
void sdla_stop(struct device *dev)
{
   struct frad_local *flp;
 
   flp = dev->priv;
   switch(flp->type)
   {
      case SDLA_S502A:
         outb(SDLA_S502A_HALT, dev->base_addr + SDLA_REG_CONTROL);
         flp->state = SDLA_HALT;
         break;
      case SDLA_S502E:
         outb(SDLA_HALT, dev->base_addr + SDLA_REG_Z80_CONTROL);
         outb(SDLA_S502E_ENABLE, dev->base_addr + SDLA_REG_CONTROL);
         flp->state = SDLA_S502E_ENABLE;
         break;
      case SDLA_S507:
         flp->state &= ~SDLA_CPUEN;
         outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
         break;
      case SDLA_S508:
         flp->state &= ~SDLA_CPUEN;
         outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
         break;
   }
}
 
void sdla_start(struct device *dev)
{
   struct frad_local *flp;
 
   flp = dev->priv;
   switch(flp->type)
   {
      case SDLA_S502A:
         outb(SDLA_S502A_NMI, dev->base_addr + SDLA_REG_CONTROL);
         outb(SDLA_S502A_START, dev->base_addr + SDLA_REG_CONTROL);
         flp->state = SDLA_S502A_START;
         break;
      case SDLA_S502E:
         outb(SDLA_S502E_CPUEN, dev->base_addr + SDLA_REG_Z80_CONTROL);
         outb(0x00, dev->base_addr + SDLA_REG_CONTROL);
         flp->state = 0;
         break;
      case SDLA_S507:
         flp->state |= SDLA_CPUEN;
         outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
         break;
      case SDLA_S508:
         flp->state |= SDLA_CPUEN;
         outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
         break;
   }
}
 
/****************************************************
 *
 * this is used for the S502A/E cards to determine
 * the speed of the onboard CPU.  Calibration is
 * necessary for the Frame Relay code uploaded
 * later.  Incorrect results cause timing problems
 * with link checks & status messages
 *
 ***************************************************/
 
int sdla_z80_poll(struct device *dev, int z80_addr, int jiffs, char resp1, char resp2)
{
   unsigned long start, done, now;
   char          resp, *temp;
 
   start = now = jiffies;
   done = jiffies + jiffs;
 
   temp = (void *)dev->mem_start;
   temp += z80_addr & SDLA_ADDR_MASK;
 
   resp = ~resp1;
   while ((jiffies < done) && (resp != resp1) && (!resp2 || (resp != resp2)))
   {
      if (jiffies != now)
      {
         SDLA_WINDOW(dev, z80_addr);
         now = jiffies;
         resp = *temp;
      }
   }
   return(jiffies < done ? jiffies - start : -1);
}
 
/* constants for Z80 CPU speed */
#define Z80_READY               '1'     /* Z80 is ready to begin */
#define LOADER_READY            '2'     /* driver is ready to begin */
#define Z80_SCC_OK              '3'     /* SCC is on board */
#define Z80_SCC_BAD             '4'     /* SCC was not found */
 
static int sdla_cpuspeed(struct device *dev, struct ifreq *ifr)
{
   int  jiffs;
   char data;
 
   sdla_start(dev);
   if (sdla_z80_poll(dev, 0, 3*HZ, Z80_READY, 0) < 0)
      return(-EIO);
 
   data = LOADER_READY;
   sdla_write(dev, 0, &data, 1);
 
   if ((jiffs = sdla_z80_poll(dev, 0, 8*HZ, Z80_SCC_OK, Z80_SCC_BAD)) < 0)
      return(-EIO);
 
   sdla_stop(dev);
   sdla_read(dev, 0, &data, 1);
 
   if (data == Z80_SCC_BAD)
      return(-EIO);
 
   if (data != Z80_SCC_OK)
      return(-EINVAL);
 
   if (jiffs < 165)
      ifr->ifr_mtu = SDLA_CPU_16M;
   else
      if (jiffs < 220)
         ifr->ifr_mtu = SDLA_CPU_10M;
      else
         if (jiffs < 258)
            ifr->ifr_mtu = SDLA_CPU_8M;
         else
            if (jiffs < 357)
               ifr->ifr_mtu = SDLA_CPU_7M;
            else
               if (jiffs < 467)
                  ifr->ifr_mtu = SDLA_CPU_5M;
               else
                  ifr->ifr_mtu = SDLA_CPU_3M;
 
   return(0);
}
 
/************************************************
 *
 *  Direct interaction with the Frame Relay code
 *  starts here.
 *
 ************************************************/
 
struct _dlci_stat {
   short dlci           __attribute__((packed));
   char  flags          __attribute__((packed));
};
 
struct _frad_stat {
   char    flags;
   struct _dlci_stat dlcis[SDLA_MAX_DLCI];
};
 
static void sdla_errors(struct device *dev, int cmd, int dlci, int ret, int len, void *data)
{
   struct _dlci_stat *pstatus;
   short             *pdlci;
   int               i;
   char              *state, line[30];
 
   switch (ret)
   {
      case SDLA_RET_MODEM:
         state = data;
         if (*state & SDLA_MODEM_DCD_LOW)
            printk(KERN_INFO "%s: Modem DCD unexpectedly low!\n", dev->name);
         if (*state & SDLA_MODEM_CTS_LOW)
            printk(KERN_INFO "%s: Modem CTS unexpectedly low!\n", dev->name);
/* I should probably do something about this! */
         break;
 
      case SDLA_RET_CHANNEL_OFF:
         printk(KERN_INFO "%s: Channel became inoperative!\n", dev->name);
/* same here */
         break;
 
      case SDLA_RET_CHANNEL_ON:
         printk(KERN_INFO "%s: Channel became operative!\n", dev->name);
/* same here */
         break;
 
      case SDLA_RET_DLCI_STATUS:
         printk(KERN_INFO "%s: Status change reported by Access Node.\n", dev->name);
         len /= sizeof(struct _dlci_stat);
         for(pstatus = data, i=0;i < len;i++,pstatus++)
         {
            if (pstatus->flags & SDLA_DLCI_NEW)
               state = "new";
            else
               if (pstatus->flags & SDLA_DLCI_DELETED)
                  state = "deleted";
               else
                  if (pstatus->flags & SDLA_DLCI_ACTIVE)
                     state = "active";
                  else
                  {
                     sprintf(line, "unknown status: %02X", pstatus->flags);
                     state = line;
                  }
            printk(KERN_INFO "%s: DLCI %i: %s.\n", dev->name, pstatus->dlci, state);
/* same here */
         }
         break;
 
      case SDLA_RET_DLCI_UNKNOWN:
         printk(KERN_INFO "%s: Received unknown DLCIs:", dev->name);
         len /= sizeof(short);
         for(pdlci = data,i=0;i < len;i++,pdlci++)
            printk(" %i", *pdlci);
         printk("\n");
         break;
 
      case SDLA_RET_TIMEOUT:
         printk(KERN_ERR "%s: Command timed out!\n", dev->name);
         break;
 
      case SDLA_RET_BUF_OVERSIZE:
         printk(KERN_INFO "%s: Bc/CIR overflow, acceptable size is %i\n", dev->name, len);
         break;
 
      case SDLA_RET_BUF_TOO_BIG:
         printk(KERN_INFO "%s: Buffer size over specified max of %i\n", dev->name, len);
         break;
 
      case SDLA_RET_CHANNEL_INACTIVE:
      case SDLA_RET_DLCI_INACTIVE:
      case SDLA_RET_CIR_OVERFLOW:
      case SDLA_RET_NO_BUFS:
         if (cmd == SDLA_INFORMATION_WRITE)
            break;
 
      default:
         printk(KERN_DEBUG "%s: Cmd 0x%2.2X generated return code 0x%2.2X\n", dev->name, cmd, ret);
/* Further processing could be done here */
         break;
   }
}
 
static int sdla_cmd(struct device *dev, int cmd, short dlci, short flags,
                        void *inbuf, short inlen, void *outbuf, short *outlen)
{
   static struct _frad_stat status;
   struct frad_local        *flp;
   struct sdla_cmd          *cmd_buf;
   unsigned long            pflags;
   int                      jiffs, ret, waiting, len;
   long                     window;
 
   flp = dev->priv;
 
   window = flp->type == SDLA_S508 ? SDLA_508_CMD_BUF : SDLA_502_CMD_BUF;
   cmd_buf = (struct sdla_cmd *)(dev->mem_start + (window & SDLA_ADDR_MASK));
   ret = 0;
   len = 0;
   jiffs = jiffies + HZ;  /* 1 second is plenty */
   save_flags(pflags);
   cli();
   SDLA_WINDOW(dev, window);
   cmd_buf->cmd = cmd;
   cmd_buf->dlci = dlci;
   cmd_buf->flags = flags;
 
   if (inbuf)
      memcpy(cmd_buf->data, inbuf, inlen);
 
   cmd_buf->length = inlen;
 
   cmd_buf->opp_flag = 1;
   restore_flags(pflags);
 
   waiting = 1;
   len = 0;
   while (waiting && (jiffies <= jiffs))
   {
      if (waiting++ % 3)
      {
         save_flags(pflags);
         cli();
         SDLA_WINDOW(dev, window);
         waiting = ((volatile int)(cmd_buf->opp_flag));
         restore_flags(pflags);
      }
   }
 
   if (!waiting)
   {
      save_flags(pflags);
      cli();
      SDLA_WINDOW(dev, window);
      ret = cmd_buf->retval;
      len = cmd_buf->length;
      if (outbuf && outlen)
      {
         *outlen = *outlen >= len ? len : *outlen;
 
         if (*outlen)
            memcpy(outbuf, cmd_buf->data, *outlen);
      }
 
      /* This is a local copy that's used for error handling */
      if (ret)
         memcpy(&status, cmd_buf->data, len > sizeof(status) ? sizeof(status) : len);
 
      restore_flags(pflags);
   }
   else
      ret = SDLA_RET_TIMEOUT;
 
   if (ret != SDLA_RET_OK)
      sdla_errors(dev, cmd, dlci, ret, len, &status);
 
   return(ret);
}
 
/***********************************************
 *
 * these functions are called by the DLCI driver
 *
 ***********************************************/
 
static int sdla_reconfig(struct device *dev);
 
int sdla_activate(struct device *slave, struct device *master)
{
   struct frad_local *flp;
   int               i;
 
   flp = slave->priv;
 
   for(i=0;i<CONFIG_DLCI_MAX;i++)
      if (flp->master[i] == master)
         break;
 
   if (i == CONFIG_DLCI_MAX)
      return(-ENODEV);
 
   flp->dlci[i] = abs(flp->dlci[i]);
 
   if (slave->start && (flp->config.station == FRAD_STATION_NODE))
      sdla_cmd(slave, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL);
 
   return(0);
}
 
int sdla_deactivate(struct device *slave, struct device *master)
{
   struct frad_local *flp;
   int               i;
 
   flp = slave->priv;
 
   for(i=0;i<CONFIG_DLCI_MAX;i++)
      if (flp->master[i] == master)
         break;
 
   if (i == CONFIG_DLCI_MAX)
      return(-ENODEV);
 
   flp->dlci[i] = -abs(flp->dlci[i]);
 
   if (slave->start && (flp->config.station == FRAD_STATION_NODE))
      sdla_cmd(slave, SDLA_DEACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL);
 
   return(0);
}
 
int sdla_assoc(struct device *slave, struct device *master)
{
   struct frad_local *flp;
   int               i;
 
   if (master->type != ARPHRD_DLCI)
      return(-EINVAL);
 
   flp = slave->priv;
 
   for(i=0;i<CONFIG_DLCI_MAX;i++)
   {
      if (!flp->master[i])
         break;
      if (abs(flp->dlci[i]) == *(short *)(master->dev_addr))
         return(-EADDRINUSE);
   }
 
   if (i == CONFIG_DLCI_MAX)
      return(-EMLINK);  /* #### Alan: Comments on this ?? */
 
   MOD_INC_USE_COUNT;
 
   flp->master[i] = master;
   flp->dlci[i] = -*(short *)(master->dev_addr);
   master->mtu = slave->mtu;
 
   if (slave->start) {
      if (flp->config.station == FRAD_STATION_CPE)
         sdla_reconfig(slave);
      else
         sdla_cmd(slave, SDLA_ADD_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL);
   }
 
   return(0);
}
 
int sdla_deassoc(struct device *slave, struct device *master)
{
   struct frad_local *flp;
   int               i;
 
   flp = slave->priv;
 
   for(i=0;i<CONFIG_DLCI_MAX;i++)
      if (flp->master[i] == master)
         break;
 
   if (i == CONFIG_DLCI_MAX)
      return(-ENODEV);
 
   flp->master[i] = NULL;
   flp->dlci[i] = 0;
 
   MOD_DEC_USE_COUNT;
 
   if (slave->start) {
      if (flp->config.station == FRAD_STATION_CPE)
         sdla_reconfig(slave);
      else
         sdla_cmd(slave, SDLA_DELETE_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL);
   }
 
   return(0);
}
 
int sdla_dlci_conf(struct device *slave, struct device *master, int get)
{
   struct frad_local *flp;
   struct dlci_local *dlp;
   int               i;
   short             len, ret;
 
   flp = slave->priv;
 
   for(i=0;i<CONFIG_DLCI_MAX;i++)
      if (flp->master[i] == master)
         break;
 
   if (i == CONFIG_DLCI_MAX)
      return(-ENODEV);
 
   dlp = master->priv;
 
   ret = SDLA_RET_OK;
   len = sizeof(struct dlci_conf);
   if (slave->start) {
      if (get)
         ret = sdla_cmd(slave, SDLA_READ_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0,
                     NULL, 0, &dlp->config, &len);
      else
         ret = sdla_cmd(slave, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0,
                     &dlp->config, sizeof(struct dlci_conf) - 4 * sizeof(short), NULL, NULL);
   }
 
   return(ret == SDLA_RET_OK ? 0 : -EIO);
}
 
/**************************
 *
 * now for the Linux driver
 *
 **************************/
 
/* NOTE: the DLCI driver deals with freeing the SKB!! */
static int sdla_transmit(struct sk_buff *skb, struct device *dev)
{
   struct frad_local *flp;
   int               ret, addr, accept;
   short             size;
   unsigned long     flags;
   struct buf_entry  *pbuf;
 
   flp = dev->priv;
   ret = 0;
   accept = 1;
 
   if (dev->tbusy)
      return(1);
 
   if (skb == NULL)
      return(0);
 
   if (set_bit(0, (void*)&dev->tbusy) != 0) {
      printk(KERN_WARNING "%s: transmitter access conflict.\n", dev->name);
      dev_kfree_skb(skb, FREE_WRITE);
   }
   else
   {
      /*
       * stupid GateD insists on setting up the multicast router thru us
       * and we're ill equipped to handle a non Frame Relay packet at this
       * time!
       */
 
      accept = 1;
      switch (dev->type)
      {
         case ARPHRD_FRAD:
            if (skb->dev->type != ARPHRD_DLCI)
            {
               printk(KERN_WARNING "%s: Non DLCI device, type %i, tried to send on FRAD module.\n", dev->name, skb->dev->type);
               accept = 0;
            }
            break;
 
         default:
            printk(KERN_WARNING "%s: unknown firmware type 0x%4.4X\n", dev->name, dev->type);
            accept = 0;
            break;
      }
 
      if (accept)
      {
         /* this is frame specific, but till there's a PPP module, it's the default */
         switch (flp->type)
         {
            case SDLA_S502A:
            case SDLA_S502E:
               ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, skb->data, skb->len, NULL, NULL);
               break;
 
            case SDLA_S508:
               size = sizeof(addr);
               ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, NULL, skb->len, &addr, &size);
               if (ret == SDLA_RET_OK)
               {
                  save_flags(flags);
                  cli();
                  SDLA_WINDOW(dev, addr);
                  pbuf = (void *)(((int) dev->mem_start) + (addr & SDLA_ADDR_MASK));
 
                  sdla_write(dev, pbuf->buf_addr, skb->data, skb->len);
 
                  SDLA_WINDOW(dev, addr);
                  pbuf->opp_flag = 1;
                  restore_flags(flags);
               }
               break;
         }
 
         switch (ret)
         {
            case SDLA_RET_OK:
               flp->stats.tx_packets++;
               ret = DLCI_RET_OK;
               break;
 
            case SDLA_RET_CIR_OVERFLOW:
            case SDLA_RET_BUF_OVERSIZE:
            case SDLA_RET_NO_BUFS:
               flp->stats.tx_dropped++;
               ret = DLCI_RET_DROP;
               break;
 
            default:
               flp->stats.tx_errors++;
               ret = DLCI_RET_ERR;
               break;
         }
      }
      dev->tbusy = 0;
   }
   return(ret);
}
 
static void sdla_receive(struct device *dev)
{
   struct device     *master;
   struct frad_local *flp;
   struct dlci_local *dlp;
   struct sk_buff    *skb;
 
   struct sdla_cmd   *cmd;
   struct buf_info   *pbufi;
   struct buf_entry  *pbuf;
 
   unsigned long     flags;
   int               i, received, success, addr, buf_base, buf_top;
   short             dlci, len, len2, split;
 
   flp = dev->priv;
   success = 1;
   received = addr = buf_top = buf_base = 0;
   len = dlci = 0;
   skb = NULL;
   master = NULL;
   cmd = NULL;
   pbufi = NULL;
   pbuf = NULL;
 
   save_flags(flags);
   cli();
 
   switch (flp->type)
   {
      case SDLA_S502A:
      case SDLA_S502E:
         cmd = (void *) (dev->mem_start + (SDLA_502_RCV_BUF & SDLA_ADDR_MASK));
         SDLA_WINDOW(dev, SDLA_502_RCV_BUF);
         success = cmd->opp_flag;
         if (!success)
            break;
 
         dlci = cmd->dlci;
         len = cmd->length;
         break;
 
      case SDLA_S508:
         pbufi = (void *) (dev->mem_start + (SDLA_508_RXBUF_INFO & SDLA_ADDR_MASK));
         SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO);
         pbuf = (void *) (dev->mem_start + ((pbufi->rse_base + flp->buffer * sizeof(struct buf_entry)) & SDLA_ADDR_MASK));
         success = pbuf->opp_flag;
         if (!success)
            break;
 
         buf_top = pbufi->buf_top;
         buf_base = pbufi->buf_base;
         dlci = pbuf->dlci;
         len = pbuf->length;
         addr = pbuf->buf_addr;
         break;
   }
 
   /* common code, find the DLCI and get the SKB */
   if (success)
   {
      for (i=0;i<CONFIG_DLCI_MAX;i++)
         if (flp->dlci[i] == dlci)
            break;
 
      if (i == CONFIG_DLCI_MAX)
      {
         printk(KERN_NOTICE "%s: Received packet from invalid DLCI %i, ignoring.", dev->name, dlci);
         flp->stats.rx_errors++;
         success = 0;
      }
   }
 
   if (success)
   {
      master = flp->master[i];
      skb = dev_alloc_skb(len + sizeof(struct frhdr));
      if (skb == NULL)
      {
         printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
         flp->stats.rx_dropped++;
         success = 0;
      }
      else
         skb_reserve(skb, sizeof(struct frhdr));
   }
 
   /* pick up the data */
   switch (flp->type)
   {
      case SDLA_S502A:
      case SDLA_S502E:
         if (success)
            sdla_read(dev, SDLA_502_RCV_BUF + SDLA_502_DATA_OFS, skb_put(skb,len), len);
 
         SDLA_WINDOW(dev, SDLA_502_RCV_BUF);
         cmd->opp_flag = 0;
         break;
 
      case SDLA_S508:
         if (success)
         {
            /* is this buffer split off the end of the internal ring buffer */
            split = addr + len > buf_top + 1 ? len - (buf_top - addr + 1) : 0;
            len2 = len - split;
 
            sdla_read(dev, addr, skb_put(skb, len2), len2);
            if (split)
               sdla_read(dev, buf_base, skb_put(skb, split), split);
         }
 
         /* increment the buffer we're looking at */
         SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO);
         flp->buffer = (flp->buffer + 1) % pbufi->rse_num;
         pbuf->opp_flag = 0;
         break;
   }
 
   if (success)
   {
      flp->stats.rx_packets++;
      dlp = master->priv;
      (*dlp->receive)(skb, master);
   }
 
   restore_flags(flags);
}
 
static void sdla_isr(int irq, void *dev_id, struct pt_regs * regs)
{
   struct device     *dev;
   struct frad_local *flp;
   char              byte;
 
   dev = irq2dev_map[irq];
 
   if (dev == NULL)
   {
      printk(KERN_WARNING "sdla_isr(): irq %d for unknown device.\n", irq);
      return;
   }
 
   flp = dev->priv;
 
   if (!flp->initialized)
   {
      printk(KERN_WARNING "%s: irq %d for uninitialized device.\n", dev->name, irq);
      return;
   }
 
   dev->interrupt = 1;
   byte = sdla_byte(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE);
   switch (byte)
   {
      case SDLA_INTR_RX:
         sdla_receive(dev);
         break;
 
      /* the command will get an error return, which is processed above */
      case SDLA_INTR_MODEM:
      case SDLA_INTR_STATUS:
         sdla_cmd(dev, SDLA_READ_DLC_STATUS, 0, 0, NULL, 0, NULL, NULL);
         break;
 
      case SDLA_INTR_TX:
      case SDLA_INTR_COMPLETE:
      case SDLA_INTR_TIMER:
         printk(KERN_WARNING "%s: invalid irq flag 0x%02X.\n", dev->name, byte);
         break;
   }
 
   /* the S502E requires a manual acknowledgement of the interrupt */
   if (flp->type == SDLA_S502E)
   {
      flp->state &= ~SDLA_S502E_INTACK;
      outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
      flp->state |= SDLA_S502E_INTACK;
      outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
   }
 
   /* this clears the byte, informing the Z80 we're done */
   byte = 0;
   sdla_write(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte));
   dev->interrupt = 0;
}
 
static void sdla_poll(unsigned long device)
{
   struct device     *dev;
   struct frad_local *flp;
 
   dev = (struct device *) device;
   flp = dev->priv;
 
   if (sdla_byte(dev, SDLA_502_RCV_BUF))
      sdla_receive(dev);
 
   flp->timer.expires = 1;
   add_timer(&flp->timer);
}
 
static int sdla_close(struct device *dev)
{
   struct frad_local *flp;
   struct intr_info  intr;
   int               len, i;
   short             dlcis[CONFIG_DLCI_MAX];
 
   flp = dev->priv;
 
   len = 0;
   for(i=0;i<CONFIG_DLCI_MAX;i++)
      if (flp->dlci[i])
         dlcis[len++] = abs(flp->dlci[i]);
   len *= 2;
 
   if (flp->config.station == FRAD_STATION_NODE)
   {
      for(i=0;i<CONFIG_DLCI_MAX;i++)
         if (flp->dlci[i] > 0)
            sdla_cmd(dev, SDLA_DEACTIVATE_DLCI, 0, 0, dlcis, len, NULL, NULL);
      sdla_cmd(dev, SDLA_DELETE_DLCI, 0, 0, &flp->dlci[i], sizeof(flp->dlci[i]), NULL, NULL);
   }
 
   memset(&intr, 0, sizeof(intr));
   /* let's start up the reception */
   switch(flp->type)
   {
      case SDLA_S502A:
         del_timer(&flp->timer);
         break;
 
      case SDLA_S502E:
         sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL);
         flp->state &= ~SDLA_S502E_INTACK;
         outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
         break;
 
      case SDLA_S507:
         break;
 
      case SDLA_S508:
         sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL);
         flp->state &= ~SDLA_S508_INTEN;
         outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
         break;
   }
 
   sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
 
   dev->tbusy = 1;
   dev->start = 0;
 
   MOD_DEC_USE_COUNT;
 
   return(0);
}
 
struct conf_data {
   struct frad_conf config;
   short            dlci[CONFIG_DLCI_MAX];
};
 
static int sdla_open(struct device *dev)
{
   struct frad_local *flp;
   struct dlci_local *dlp;
   struct conf_data  data;
   struct intr_info  intr;
   int               len, i;
   char              byte;
 
   flp = dev->priv;
 
   if (!flp->initialized)
      return(-EPERM);
 
   if (!flp->configured)
      return(-EPERM);
 
   /* time to send in the configuration */
   len = 0;
   for(i=0;i<CONFIG_DLCI_MAX;i++)
      if (flp->dlci[i])
         data.dlci[len++] = abs(flp->dlci[i]);
   len *= 2;
 
   memcpy(&data.config, &flp->config, sizeof(struct frad_conf));
   len += sizeof(struct frad_conf);
 
   sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
   sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL);
 
   if (flp->type == SDLA_S508)
      flp->buffer = 0;
 
   sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
 
   /* let's start up the reception */
   memset(&intr, 0, sizeof(intr));
   switch(flp->type)
   {
      case SDLA_S502A:
         flp->timer.expires = 1;
         add_timer(&flp->timer);
         break;
 
      case SDLA_S502E:
         flp->state |= SDLA_S502E_ENABLE;
         outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
         flp->state |= SDLA_S502E_INTACK;
         outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
         byte = 0;
         sdla_write(dev, SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte));
         intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM;
         sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL);
         break;
 
      case SDLA_S507:
         break;
 
      case SDLA_S508:
         flp->state |= SDLA_S508_INTEN;
         outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
         byte = 0;
         sdla_write(dev, SDLA_508_IRQ_INTERFACE, &byte, sizeof(byte));
         intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM;
         intr.irq = dev->irq;
         sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL);
         break;
   }
 
   if (flp->config.station == FRAD_STATION_CPE)
   {
      byte = SDLA_ICS_STATUS_ENQ;
      sdla_cmd(dev, SDLA_ISSUE_IN_CHANNEL_SIGNAL, 0, 0, &byte, sizeof(byte), NULL, NULL);
   }
   else
   {
      sdla_cmd(dev, SDLA_ADD_DLCI, 0, 0, data.dlci, len - sizeof(struct frad_conf), NULL, NULL);
      for(i=0;i<CONFIG_DLCI_MAX;i++)
         if (flp->dlci[i] > 0)
            sdla_cmd(dev, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], 2*sizeof(flp->dlci[i]), NULL, NULL);
   }
 
   /* configure any specific DLCI settings */
   for(i=0;i<CONFIG_DLCI_MAX;i++)
      if (flp->dlci[i])
      {
         dlp = flp->master[i]->priv;
         if (dlp->configured)
            sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0, &dlp->config, sizeof(struct dlci_conf), NULL, NULL);
      }
 
   dev->tbusy = 0;
   dev->interrupt = 0;
   dev->start = 1;
 
   MOD_INC_USE_COUNT;
 
   return(0);
}
 
static int sdla_config(struct device *dev, struct frad_conf *conf, int get)
{
   struct frad_local *flp;
   struct conf_data  data;
   int               i, err;
   short             size;
 
   if (dev->type == 0xFFFF)
      return(-EUNATCH);
 
   flp = dev->priv;
 
   if (!get)
   {
      if (dev->start)
         return(-EBUSY);
 
      err = verify_area(VERIFY_READ, conf, sizeof(struct frad_conf));
      if (err)
         return(err);
 
      memcpy_fromfs(&data.config, conf, sizeof(struct frad_conf));
 
      if (data.config.station & ~FRAD_STATION_NODE)
         return(-EINVAL);
 
      if (data.config.flags & ~FRAD_VALID_FLAGS)
         return(-EINVAL);
 
      if ((data.config.kbaud < 0) ||
          ((data.config.kbaud > 128) && (flp->type != SDLA_S508)))
         return(-EINVAL);
 
      if (data.config.clocking & ~(FRAD_CLOCK_INT | SDLA_S508_PORT_RS232))
         return(-EINVAL);
 
      if ((data.config.mtu < 0) || (data.config.mtu > SDLA_MAX_MTU))
         return(-EINVAL);
 
      if ((data.config.T391 < 5) || (data.config.T391 > 30))
         return(-EINVAL);
 
      if ((data.config.T392 < 5) || (data.config.T392 > 30))
         return(-EINVAL);
 
      if ((data.config.N391 < 1) || (data.config.N391 > 255))
         return(-EINVAL);
 
      if ((data.config.N392 < 1) || (data.config.N392 > 10))
         return(-EINVAL);
 
      if ((data.config.N393 < 1) || (data.config.N393 > 10))
         return(-EINVAL);
 
      memcpy(&flp->config, &data.config, sizeof(struct frad_conf));
      flp->config.flags |= SDLA_DIRECT_RECV;
 
      if (flp->type == SDLA_S508)
         flp->config.flags |= SDLA_TX70_RX30;
 
      if (dev->mtu != flp->config.mtu)
      {
         /* this is required to change the MTU */
         dev->mtu = flp->config.mtu;
         for(i=0;i<CONFIG_DLCI_MAX;i++)
            if (flp->master[i])
               flp->master[i]->mtu = flp->config.mtu;
      }
 
      flp->config.mtu += sizeof(struct frhdr);
 
      /* off to the races! */
      if (!flp->configured)
         sdla_start(dev);
 
      flp->configured = 1;
   }
   else
   {
      err = verify_area(VERIFY_WRITE, conf, sizeof(struct frad_conf));
      if (err)
         return(err);
 
      /* no sense reading if the CPU isn't started */
      if (dev->start)
      {
         size = sizeof(data);
         if (sdla_cmd(dev, SDLA_READ_DLCI_CONFIGURATION, 0, 0, NULL, 0, &data, &size) != SDLA_RET_OK)
            return(-EIO);
      }
      else
         if (flp->configured)
            memcpy(&data.config, &flp->config, sizeof(struct frad_conf));
         else
            memset(&data.config, 0, sizeof(struct frad_conf));
 
      memcpy(&flp->config, &data.config, sizeof(struct frad_conf));
      data.config.flags &= FRAD_VALID_FLAGS;
      data.config.mtu -= data.config.mtu > sizeof(struct frhdr) ? sizeof(struct frhdr) : data.config.mtu;
      memcpy_tofs(conf, &data.config, sizeof(struct frad_conf));
   }
 
   return(0);
}
 
static int sdla_xfer(struct device *dev, struct sdla_mem *info, int read)
{
   struct sdla_mem mem;
   int    err;
   char   *temp;
 
   err = verify_area(VERIFY_READ, info, sizeof(struct sdla_mem));
   if (err)
      return(err);
 
   memcpy_fromfs(&mem, info, sizeof(mem));
   if (read)
   {
      err = verify_area(VERIFY_WRITE, mem.data, mem.len);
      if (err)
         return(err);
 
      temp = kmalloc(mem.len, GFP_KERNEL);
      if (!temp)
         return(-ENOMEM);
      sdla_read(dev, mem.addr, temp, mem.len);
      memcpy_tofs(mem.data, temp, mem.len);
      kfree(temp);
   }
   else
   {
      err = verify_area(VERIFY_READ, mem.data, mem.len);
      if (err)
         return(err);
 
      temp = kmalloc(mem.len, GFP_KERNEL);
      if (!temp)
         return(-ENOMEM);
      memcpy_fromfs(temp, mem.data, mem.len);
      sdla_write(dev, mem.addr, temp, mem.len);
      kfree(temp);
   }
   return(0);
}
 
static int sdla_reconfig(struct device *dev)
{
   struct frad_local *flp;
   struct conf_data  data;
   int               i, len;
 
   flp = dev->priv;
 
   len = 0;
   for(i=0;i<CONFIG_DLCI_MAX;i++)
      if (flp->dlci[i])
         data.dlci[len++] = flp->dlci[i];
   len *= 2;
 
   memcpy(&data, &flp->config, sizeof(struct frad_conf));
   len += sizeof(struct frad_conf);
 
   sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
   sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL);
   sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
 
   return(0);
}
 
static int sdla_ioctl(struct device *dev, struct ifreq *ifr, int cmd)
{
   struct frad_local *flp;
 
   flp = dev->priv;
 
   if (!flp->initialized)
      return(-EPERM);
 
   switch (cmd)
   {
      case FRAD_GET_CONF:
      case FRAD_SET_CONF:
         return(sdla_config(dev, (struct frad_conf *)ifr->ifr_data, cmd == FRAD_GET_CONF));
 
      case SDLA_IDENTIFY:
         ifr->ifr_flags = flp->type;
         break;
 
      case SDLA_CPUSPEED:
         return(sdla_cpuspeed(dev, ifr));
 
/* ==========================================================
NOTE:  This is rather a useless action right now, as the
       current driver does not support protocols other than
       FR.  However, Sangoma has modules for a number of
       other protocols in the works.
============================================================*/
      case SDLA_PROTOCOL:
         if (flp->configured)
            return(-EALREADY);
 
         switch (ifr->ifr_flags)
         {
            case ARPHRD_FRAD:
               dev->type = ifr->ifr_flags;
               dev->family = AF_UNSPEC;
               break;
 
            default:
               return(-ENOPROTOOPT);
         }
         break;
 
      case SDLA_CLEARMEM:
         sdla_clear(dev);
         break;
 
      case SDLA_WRITEMEM:
      case SDLA_READMEM:
         return(sdla_xfer(dev, (struct sdla_mem *)ifr->ifr_data, cmd == SDLA_READMEM));
 
      case SDLA_START:
         sdla_start(dev);
         break;
 
      case SDLA_STOP:
         sdla_stop(dev);
         break;
 
      default:
         return(-EOPNOTSUPP);
   }
   return(0);
}
 
int sdla_change_mtu(struct device *dev, int new_mtu)
{
   struct frad_local *flp;
 
   flp = dev->priv;
 
   if (dev->start)
      return(-EBUSY);
 
   /* for now, you can't change the MTU! */
   return(-EACCES);
}
 
int sdla_set_config(struct device *dev, struct ifmap *map)
{
   struct frad_local *flp;
   int               i;
   char              byte;
 
   flp = dev->priv;
 
   if (flp->initialized)
      return(-EINVAL);
 
   for(i=0;i < sizeof(valid_port) / sizeof (int) ; i++)
      if (valid_port[i] == map->base_addr)
         break;
 
   if (i == sizeof(valid_port) / sizeof(int))
      return(-EINVAL);
 
   dev->base_addr = map->base_addr;
   request_region(dev->base_addr, SDLA_IO_EXTENTS, dev->name);
 
   /* test for card types, S502A, S502E, S507, S508                 */
   /* these tests shut down the card completely, so clear the state */
   flp->type = SDLA_UNKNOWN;
   flp->state = 0;
 
   for(i=1;i<SDLA_IO_EXTENTS;i++)
      if (inb(dev->base_addr + i) != 0xFF)
        break;
 
   if (i == SDLA_IO_EXTENTS)
   {
      outb(SDLA_HALT, dev->base_addr + SDLA_REG_Z80_CONTROL);
      if ((inb(dev->base_addr + SDLA_S502_STS) & 0x0F) == 0x08)
      {
         outb(SDLA_S502E_INTACK, dev->base_addr + SDLA_REG_CONTROL);
         if ((inb(dev->base_addr + SDLA_S502_STS) & 0x0F) == 0x0C)
         {
            outb(SDLA_HALT, dev->base_addr + SDLA_REG_CONTROL);
            flp->type = SDLA_S502E;
         }
      }
   }
 
   if (flp->type == SDLA_UNKNOWN)
   {
      for(byte=inb(dev->base_addr),i=0;i<SDLA_IO_EXTENTS;i++)
         if (inb(dev->base_addr + i) != byte)
            break;
 
      if (i == SDLA_IO_EXTENTS)
      {
         outb(SDLA_HALT, dev->base_addr + SDLA_REG_CONTROL);
         if ((inb(dev->base_addr + SDLA_S502_STS) & 0x7E) == 0x30)
         {
            outb(SDLA_S507_ENABLE, dev->base_addr + SDLA_REG_CONTROL);
            if ((inb(dev->base_addr + SDLA_S502_STS) & 0x7E) == 0x32)
            {
               outb(SDLA_HALT, dev->base_addr + SDLA_REG_CONTROL);
               flp->type = SDLA_S507;
            }
         }
      }
   }
 
   if (flp->type == SDLA_UNKNOWN)
   {
      outb(SDLA_HALT, dev->base_addr + SDLA_REG_CONTROL);
      if ((inb(dev->base_addr + SDLA_S508_STS) & 0x3F) == 0x00)
      {
         outb(SDLA_S508_INTEN, dev->base_addr + SDLA_REG_CONTROL);
         if ((inb(dev->base_addr + SDLA_S508_STS) & 0x3F) == 0x10)
         {
            outb(SDLA_HALT, dev->base_addr + SDLA_REG_CONTROL);
            flp->type = SDLA_S508;
         }
      }
   }
 
   if (flp->type == SDLA_UNKNOWN)
   {
      outb(SDLA_S502A_HALT, dev->base_addr + SDLA_REG_CONTROL);
      if (inb(dev->base_addr + SDLA_S502_STS) == 0x40)
      {
         outb(SDLA_S502A_START, dev->base_addr + SDLA_REG_CONTROL);
         if (inb(dev->base_addr + SDLA_S502_STS) == 0x40)
         {
            outb(SDLA_S502A_INTEN, dev->base_addr + SDLA_REG_CONTROL);
            if (inb(dev->base_addr + SDLA_S502_STS) == 0x44)
            {
               outb(SDLA_S502A_START, dev->base_addr + SDLA_REG_CONTROL);
               flp->type = SDLA_S502A;
            }
         }
      }
   }
 
   if (flp->type == SDLA_UNKNOWN)
   {
      printk(KERN_NOTICE "%s: Unknown card type\n", dev->name);
      return(-ENODEV);
   }
 
   switch(dev->base_addr)
   {
      case 0x270:
      case 0x280:
      case 0x380:
      case 0x390:
         if ((flp->type != SDLA_S508) && (flp->type != SDLA_S507))
            return(-EINVAL);
   }
 
   switch (map->irq)
   {
      case 2:
         if (flp->type != SDLA_S502E)
            return(-EINVAL);
         break;
 
      case 10:
      case 11:
      case 12:
      case 15:
      case 4:
         if ((flp->type != SDLA_S508) && (flp->type != SDLA_S507))
            return(-EINVAL);
 
      case 3:
      case 5:
      case 7:
         if (flp->type == SDLA_S502A)
            return(-EINVAL);
         break;
 
      default:
         return(-EINVAL);
   }
   dev->irq = map->irq;
 
   if (request_irq(dev->irq, &sdla_isr, 0, dev->name, NULL))
      return(-EADDRINUSE);
 
   irq2dev_map[dev->irq] = dev;
 
   if (flp->type == SDLA_S507)
   {
      switch(dev->irq)
      {
         case 3:
            flp->state = SDLA_S507_IRQ3;
            break;
         case 4:
            flp->state = SDLA_S507_IRQ4;
            break;
         case 5:
            flp->state = SDLA_S507_IRQ5;
            break;
         case 7:
            flp->state = SDLA_S507_IRQ7;
            break;
         case 10:
            flp->state = SDLA_S507_IRQ10;
            break;
         case 11:
            flp->state = SDLA_S507_IRQ11;
            break;
         case 12:
            flp->state = SDLA_S507_IRQ12;
            break;
         case 15:
            flp->state = SDLA_S507_IRQ15;
            break;
      }
   }
 
   for(i=0;i < sizeof(valid_mem) / sizeof (int) ; i++)
      if (valid_mem[i] == map->mem_start)
         break;
 
   if (i == sizeof(valid_mem) / sizeof(int))
      return(-EINVAL);
 
   if ((flp->type == SDLA_S502A) && (((map->mem_start & 0xF000) >> 12) == 0x0E))
      return(-EINVAL);
 
   if ((flp->type != SDLA_S507) && ((map->mem_start >> 16) == 0x0B))
      return(-EINVAL);
 
   if ((flp->type == SDLA_S507) && ((map->mem_start >> 16) == 0x0D))
      return(-EINVAL);
 
   dev->mem_start = map->mem_start;
   dev->mem_end = dev->mem_start + 0x2000;
 
   byte = flp->type != SDLA_S508 ? SDLA_8K_WINDOW : 0;
   byte |= (map->mem_start & 0xF000) >> (12 + (flp->type == SDLA_S508 ? 1 : 0));
   switch(flp->type)
   {
      case SDLA_S502A:
      case SDLA_S502E:
         switch (map->mem_start >> 16)
         {
            case 0x0A:
               byte |= SDLA_S502_SEG_A;
               break;
            case 0x0C:
               byte |= SDLA_S502_SEG_C;
               break;
            case 0x0D:
               byte |= SDLA_S502_SEG_D;
               break;
            case 0x0E:
               byte |= SDLA_S502_SEG_E;
               break;
         }
         break;
      case SDLA_S507:
         switch (map->mem_start >> 16)
         {
            case 0x0A:
               byte |= SDLA_S507_SEG_A;
               break;
            case 0x0B:
               byte |= SDLA_S507_SEG_B;
               break;
            case 0x0C:
               byte |= SDLA_S507_SEG_C;
               break;
            case 0x0E:
               byte |= SDLA_S507_SEG_E;
               break;
         }
         break;
      case SDLA_S508:
         switch (map->mem_start >> 16)
         {
            case 0x0A:
               byte |= SDLA_S508_SEG_A;
               break;
            case 0x0C:
               byte |= SDLA_S508_SEG_C;
               break;
            case 0x0D:
               byte |= SDLA_S508_SEG_D;
               break;
            case 0x0E:
               byte |= SDLA_S508_SEG_E;
               break;
         }
         break;
   }
 
   /* set the memory bits, and enable access */
   outb(byte, dev->base_addr + SDLA_REG_PC_WINDOW);
   switch(flp->type)
   {
      case SDLA_S502E:
         flp->state = SDLA_S502E_ENABLE;
         break;
      case SDLA_S507:
         flp->state |= SDLA_MEMEN;
         break;
      case SDLA_S508:
         flp->state = SDLA_MEMEN;
         break;
   }
   outb(flp->state, dev->base_addr + SDLA_REG_CONTROL);
 
   flp->initialized = 1;
   return(0);
}
 
static struct enet_statistics *sdla_stats(struct device *dev)
{
   struct frad_local *flp;
 
   flp = dev->priv;
 
   return(&flp->stats);
}
 
int sdla_init(struct device *dev)
{
   struct frad_local *flp;
   int               i;
 
   /* allocate the private data structure */
   flp = kmalloc(sizeof(struct frad_local), GFP_KERNEL);
   if (!flp)
      return(-ENOMEM);
 
   memset(flp, 0, sizeof(struct frad_local));
   dev->priv = flp;
 
   dev->flags           = 0;
   dev->open            = sdla_open;
   dev->stop            = sdla_close;
   dev->do_ioctl        = sdla_ioctl;
   dev->set_config      = sdla_set_config;
   dev->get_stats       = sdla_stats;
   dev->hard_start_xmit = sdla_transmit;
   dev->change_mtu      = sdla_change_mtu;
 
   dev->type            = 0xFFFF;
   dev->family          = AF_UNSPEC;
   dev->pa_alen         = 0;
   dev->pa_addr         = 0;
   dev->pa_dstaddr      = 0;
   dev->pa_brdaddr      = 0;
   dev->pa_mask         = 0;
   dev->hard_header_len = 0;
   dev->addr_len        = 0;
   dev->mtu             = SDLA_MAX_MTU;
 
   for (i = 0; i < DEV_NUMBUFFS; i++)
      skb_queue_head_init(&dev->buffs[i]);
 
   flp->activate        = sdla_activate;
   flp->deactivate      = sdla_deactivate;
   flp->assoc           = sdla_assoc;
   flp->deassoc         = sdla_deassoc;
   flp->dlci_conf       = sdla_dlci_conf;
 
   init_timer(&flp->timer);
   flp->timer.expires   = 1;
   flp->timer.data      = (unsigned long) dev;
   flp->timer.function  = sdla_poll;
 
   return(0);
}
 
void sdla_setup(void)
{
   printk("%s.\n", version);
   register_frad(devname);
}
 
#ifdef MODULE
static struct device sdla0 = {"sdla0", 0, 0, 0, 0, 0, 0, 0, 0, 0, NULL, sdla_init};
 
int init_module(void)
{
   int result;
 
   sdla_setup();
   if ((result = register_netdev(&sdla0)) != 0)
      return result;
 
   return 0;
}
 
void cleanup_module(void)
{
   unregister_netdev(&sdla0);
   if (sdla0.priv)
      kfree(sdla0.priv);
   if (sdla0.irq)
      free_irq(sdla0.irq, NULL);
}
#endif /* MODULE */
Browse

Tools

Subversion Repositories or1k_old

[/] [or1k_old/] [trunk/] [uclinux/] [uClinux-2.0.x/] [drivers/] [net/] [sdla.c] - Blame information for rev 1782

Line No.	Rev	Author	Line
1	199	simons	`/*`
2			`* SDLA An implementation of a driver for the Sangoma S502/S508 series`
3			`* multi-protocol PC interface card. Initial offering is with`
4			`* the DLCI driver, providing Frame Relay support for linux.`
5			`*`
6			`* Global definitions for the Frame relay interface.`
7			`*`
8			`* Version: @(#)sdla.c 0.30 12 Sep 1996`
9			`*`
10			`* Credits: Sangoma Technologies, for the use of 2 cards for an extended`
11			`* period of time.`
12			`* David Mandelstam <dm@sangoma.com> for getting me started on`
13			`* this project, and incentive to complete it.`
14			`* Gene Kozen <74604.152@compuserve.com> for providing me with`
15			`* important information about the cards.`
16			`*`
17			`* Author: Mike McLagan <mike.mclagan@linux.org>`
18			`*`
19			`* Changes:`
20			`* 0.15 Mike McLagan Improved error handling, packet dropping`
21			`* 0.20 Mike McLagan New transmit/receive flags for config`
22			`* If in FR mode, don't accept packets from`
23			`* non DLCI devices.`
24			`* 0.25 Mike McLagan Fixed problem with rejecting packets`
25			`* from non DLCI devices.`
26			`* 0.30 Mike McLagan Fixed kernel panic when used with modified`
27			`* ifconfig`
28			`*`
29			`* This program is free software; you can redistribute it and/or`
30			`* modify it under the terms of the GNU General Public License`
31			`* as published by the Free Software Foundation; either version`
32			`* 2 of the License, or (at your option) any later version.`
33			`*/`
34
35			`#include <linux/config.h>`
36			`#include <linux/module.h>`
37
38			`#include <linux/kernel.h>`
39			`#include <linux/sched.h>`
40			`#include <linux/types.h>`