URL https://opencores.org/ocsvn/or1k_soc_on_altera_embedded_dev_kit/or1k_soc_on_altera_embedded_dev_kit/trunk

Subversion Repositories or1k_soc_on_altera_embedded_dev_kit

[/] [or1k_soc_on_altera_embedded_dev_kit/] [trunk/] [linux-2.6/] [linux-2.6.24/] [arch/] [m32r/] [platforms/] [mappi2/] [dot.gdbinit.vdec2] - Blame information for rev 3

Details | Compare with Previous | View Log


# .gdbinit file
# $Id: dot.gdbinit.vdec2,v 1.2 2004/11/11 02:03:15 takata Exp $
 
# setting
set width 0d70
set radix 0d16
use_debug_dma
 
# Initialize SDRAM controller for Mappi
define sdram_init
  # SDIR0
  set *(unsigned long *)0x00ef6008=0x00000182
  # SDIR1
  set *(unsigned long *)0x00ef600c=0x00000001
  # Initialize wait
  shell sleep 1
  # Ch0-MOD
  set *(unsigned long *)0x00ef602c=0x00000020
  # Ch0-TR
  set *(unsigned long *)0x00ef6028=0x00041302
  # Ch0-ADR
  set *(unsigned long *)0x00ef6020=0x08000004
  # AutoRef On
  set *(unsigned long *)0x00ef6004=0x00010705
  # Access enable
  set *(unsigned long *)0x00ef6024=0x00000001
end
document sdram_init
  Mappi SDRAM controller initialization
  0x08000000 - 0x0bffffff (64MB)
end
 
# Initialize SDRAM controller for Mappi
define sdram_init2
  # SDIR0
  set *(unsigned long *)0x00ef6008=0x00000182
  # Ch0-MOD
  set *(unsigned long *)0x00ef602c=0x00000020
  # Ch0-TR
  set *(unsigned long *)0x00ef6028=0x00010002
  # Ch0-ADR
  set *(unsigned long *)0x00ef6020=0x08000004
  # AutoRef On
  set *(unsigned long *)0x00ef6004=0x00010107
  # SDIR1
  set *(unsigned long *)0x00ef600c=0x00000001
  # Initialize wait
  shell sleep 1
  # Access enable
  set *(unsigned long *)0x00ef6024=0x00000001
  shell sleep 1
end
document sdram_init
  Mappi SDRAM controller initialization
  0x08000000 - 0x0bffffff (64MB)
end
 
# Initialize LAN controller for Mappi
define lanc_init
  # Set BSEL1 (BSEL3 for the Chaos's bselc)
  #set *(unsigned long *)0x00ef5004 = 0x0fff330f
  #set *(unsigned long *)0x00ef5004 = 0x01113301
 
#  set *(unsigned long *)0x00ef5004 = 0x02011101
#  set *(unsigned long *)0x00ef5004 = 0x04441104
 
  # BSEL5
#  set *(unsigned long *)0x00ef5014 = 0x0ccc310c
#  set *(unsigned long *)0x00ef5014 = 0x0303310f
#  set *(unsigned long *)0x00ef5014 = 0x01011102 -> NG
#  set *(unsigned long *)0x00ef5014 = 0x03033103
 
 set *(unsigned long *)0x00ef500c = 0x0b0b1304
 set *(unsigned long *)0x00ef5010 = 0x03033302
# set *(unsigned long *)0x00ef5018 = 0x02223302
end
 
# MMU enable
define mmu_enable
  set $evb=0x88000000
  set *(unsigned long *)0xffff0024=1
end
 
# MMU disable
define mmu_disable
  set $evb=0
  set *(unsigned long *)0xffff0024=0
end
 
# Show TLB entries
define show_tlb_entries
  set $i = 0
  set $addr = $arg0
  while ($i < 0d16 )
    set $tlb_tag = *(unsigned long*)$addr
    set $tlb_data = *(unsigned long*)($addr + 4)
    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
    set $i = $i + 1
    set $addr = $addr + 8
  end
end
define itlb
  set $itlb=0xfe000000
  show_tlb_entries $itlb
end
define dtlb
  set $dtlb=0xfe000800
  show_tlb_entries $dtlb
end
 
# Cache ON
define set_cache_type
  set $mctype = (void*)0xfffffff8
# chaos
# set *(unsigned long *)($mctype) = 0x0000c000
# m32102 i-cache only
  set *(unsigned long *)($mctype) = 0x00008000
# m32102 d-cache only
#  set *(unsigned long *)($mctype) = 0x00004000
end
define cache_on
  set $param = (void*)0x08001000
  set *(unsigned long *)($param) = 0x60ff6102
end
 
 
# Show current task structure
define show_current
  set $current = $spi & 0xffffe000
  printf "$current=0x%08lX\n",$current
  print *(struct task_struct *)$current
end
 
# Show user assigned task structure
define show_task
  set $task = $arg0 & 0xffffe000
  printf "$task=0x%08lX\n",$task
  print *(struct task_struct *)$task
end
document show_task
  Show user assigned task structure
  arg0 : task structure address
end
 
# Show M32R registers
define show_regs
  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
  printf "EVB[0x%08lX]\n",$evb
 
  set $mests = *(unsigned long *)0xffff000c
  set $mdeva = *(unsigned long *)0xffff0010
  printf "MESTS[0x%08lX] MDEVA[0x%08lX]\n",$mests,$mdeva
end
 
 
# Setup all
define setup
  sdram_init
#  lanc_init
#  dispc_init
#  set $evb=0x08000000
end
 
# Load modules
define load_modules
  use_debug_dma
  load
#  load busybox.mot
end
 
# Set kernel parameters
define set_kernel_parameters
  set $param = (void*)0x08001000
 
  ## MOUNT_ROOT_RDONLY
  set {long}($param+0x00)=0
  ## RAMDISK_FLAGS
  #set {long}($param+0x04)=0
  ## ORIG_ROOT_DEV
  #set {long}($param+0x08)=0x00000100
  ## LOADER_TYPE
  #set {long}($param+0x0C)=0
  ## INITRD_START
  set {long}($param+0x10)=0x082a0000
  ## INITRD_SIZE
  set {long}($param+0x14)=0d6200000
 
  # M32R_CPUCLK
  set *(unsigned long *)($param + 0x0018) = 0d25000000
  # M32R_BUSCLK
  set *(unsigned long *)($param + 0x001c) = 0d25000000
  # M32R_TIMER_DIVIDE
  set *(unsigned long *)($param + 0x0020) = 0d128
 
 
 set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6 nfsaddrs=192.168.0.102:192.168.0.1:192.168.0.1:255.255.255.0:mappi: \0"
 
 
end
 
# Boot
define boot
  set_kernel_parameters
  debug_chaos
  set $pc=0x08002000
  set $fp=0
  del b
  si
end
 
# Restart
define restart
  sdireset
  sdireset
  setup
  load_modules
  boot
end
 
sdireset
sdireset
file vmlinux
target m32rsdi
 
restart
boot
 
 

Browse

Tools

Subversion Repositories or1k_soc_on_altera_embedded_dev_kit

[/] [or1k_soc_on_altera_embedded_dev_kit/] [trunk/] [linux-2.6/] [linux-2.6.24/] [arch/] [m32r/] [platforms/] [mappi2/] [dot.gdbinit.vdec2] - Blame information for rev 3

Line No.	Rev	Author	Line
1	3	xianfeng	`# .gdbinit file`
2			`# $Id: dot.gdbinit.vdec2,v 1.2 2004/11/11 02:03:15 takata Exp $`
3
4			`# setting`
5			`set width 0d70`
6			`set radix 0d16`
7			`use_debug_dma`
8
9			`# Initialize SDRAM controller for Mappi`
10			`define sdram_init`
11			`# SDIR0`
12			`set (unsigned long )0x00ef6008=0x00000182`
13			`# SDIR1`
14			`set (unsigned long )0x00ef600c=0x00000001`
15			`# Initialize wait`
16			`shell sleep 1`
17			`# Ch0-MOD`
18			`set (unsigned long )0x00ef602c=0x00000020`
19			`# Ch0-TR`
20			`set (unsigned long )0x00ef6028=0x00041302`
21			`# Ch0-ADR`
22			`set (unsigned long )0x00ef6020=0x08000004`
23			`# AutoRef On`
24			`set (unsigned long )0x00ef6004=0x00010705`
25			`# Access enable`
26			`set (unsigned long )0x00ef6024=0x00000001`
27			`end`
28			`document sdram_init`
29			`Mappi SDRAM controller initialization`
30			`0x08000000 - 0x0bffffff (64MB)`
31			`end`
32
33			`# Initialize SDRAM controller for Mappi`
34			`define sdram_init2`
35			`# SDIR0`
36			`set (unsigned long )0x00ef6008=0x00000182`
37			`# Ch0-MOD`
38			`set (unsigned long )0x00ef602c=0x00000020`
39			`# Ch0-TR`
40			`set (unsigned long )0x00ef6028=0x00010002`
41			`# Ch0-ADR`
42			`set (unsigned long )0x00ef6020=0x08000004`
43			`# AutoRef On`
44			`set (unsigned long )0x00ef6004=0x00010107`
45			`# SDIR1`
46			`set (unsigned long )0x00ef600c=0x00000001`
47			`# Initialize wait`
48			`shell sleep 1`
49			`# Access enable`
50			`set (unsigned long )0x00ef6024=0x00000001`
51			`shell sleep 1`
52			`end`
53			`document sdram_init`
54			`Mappi SDRAM controller initialization`
55			`0x08000000 - 0x0bffffff (64MB)`
56			`end`
57
58			`# Initialize LAN controller for Mappi`
59			`define lanc_init`
60			`# Set BSEL1 (BSEL3 for the Chaos's bselc)`
61			`#set (unsigned long )0x00ef5004 = 0x0fff330f`
62			`#set (unsigned long )0x00ef5004 = 0x01113301`
63
64			`# set (unsigned long )0x00ef5004 = 0x02011101`
65			`# set (unsigned long )0x00ef5004 = 0x04441104`
66
67			`# BSEL5`
68			`# set (unsigned long )0x00ef5014 = 0x0ccc310c`
69			`# set (unsigned long )0x00ef5014 = 0x0303310f`
70			`# set (unsigned long )0x00ef5014 = 0x01011102 -> NG`
71			`# set (unsigned long )0x00ef5014 = 0x03033103`
72
73			`set (unsigned long )0x00ef500c = 0x0b0b1304`
74			`set (unsigned long )0x00ef5010 = 0x03033302`
75			`# set (unsigned long )0x00ef5018 = 0x02223302`
76			`end`
77
78			`# MMU enable`
79			`define mmu_enable`
80			`set $evb=0x88000000`
81			`set (unsigned long )0xffff0024=1`
82			`end`
83
84			`# MMU disable`
85			`define mmu_disable`
86			`set $evb=0`
87			`set (unsigned long )0xffff0024=0`
88			`end`
89
90			`# Show TLB entries`
91			`define show_tlb_entries`
92			`set $i = 0`
93			`set $addr = $arg0`
94			`while ($i < 0d16 )`
95			`set $tlb_tag = (unsigned long)$addr`
96			`set $tlb_data = (unsigned long)($addr + 4)`
97			`printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data`
98			`set $i = $i + 1`
99			`set $addr = $addr + 8`
100			`end`
101			`end`
102			`define itlb`
103			`set $itlb=0xfe000000`
104			`show_tlb_entries $itlb`
105			`end`
106			`define dtlb`
107			`set $dtlb=0xfe000800`
108			`show_tlb_entries $dtlb`
109			`end`
110
111			`# Cache ON`
112			`define set_cache_type`
113			`set $mctype = (void*)0xfffffff8`
114			`# chaos`
115			`# set (unsigned long )($mctype) = 0x0000c000`
116			`# m32102 i-cache only`
117			`set (unsigned long )($mctype) = 0x00008000`
118			`# m32102 d-cache only`
119			`# set (unsigned long )($mctype) = 0x00004000`
120			`end`
121			`define cache_on`
122			`set $param = (void*)0x08001000`
123			`set (unsigned long )($param) = 0x60ff6102`
124			`end`
125
126
127			`# Show current task structure`
128			`define show_current`
129			`set $current = $spi & 0xffffe000`
130			`printf "$current=0x%08lX\n",$current`
131			`print (struct task_struct )$current`
132			`end`
133
134			`# Show user assigned task structure`
135			`define show_task`
136			`set $task = $arg0 & 0xffffe000`
137			`printf "$task=0x%08lX\n",$task`
138			`print (struct task_struct )$task`
139			`end`
140			`document show_task`
141			`Show user assigned task structure`
142			`arg0 : task structure address`
143			`end`
144
145			`# Show M32R registers`
146			`define show_regs`
147			`printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3`
148			`printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7`
149			`printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11`
150			`printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp`
151			`printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu`
152			`printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch`
153			`printf "EVB[0x%08lX]\n",$evb`
154
155			`set $mests = (unsigned long )0xffff000c`
156			`set $mdeva = (unsigned long )0xffff0010`
157			`printf "MESTS[0x%08lX] MDEVA[0x%08lX]\n",$mests,$mdeva`
158			`end`
159
160
161			`# Setup all`
162			`define setup`
163			`sdram_init`
164			`# lanc_init`
165			`# dispc_init`
166			`# set $evb=0x08000000`
167			`end`
168
169			`# Load modules`
170			`define load_modules`
171			`use_debug_dma`
172			`load`
173			`# load busybox.mot`
174			`end`
175
176			`# Set kernel parameters`
177			`define set_kernel_parameters`
178			`set $param = (void*)0x08001000`
179
180			`## MOUNT_ROOT_RDONLY`
181			`set {long}($param+0x00)=0`
182			`## RAMDISK_FLAGS`
183			`#set {long}($param+0x04)=0`
184			`## ORIG_ROOT_DEV`
185			`#set {long}($param+0x08)=0x00000100`
186			`## LOADER_TYPE`
187			`#set {long}($param+0x0C)=0`
188			`## INITRD_START`
189			`set {long}($param+0x10)=0x082a0000`
190			`## INITRD_SIZE`
191			`set {long}($param+0x14)=0d6200000`
192
193			`# M32R_CPUCLK`
194			`set (unsigned long )($param + 0x0018) = 0d25000000`
195			`# M32R_BUSCLK`
196			`set (unsigned long )($param + 0x001c) = 0d25000000`
197			`# M32R_TIMER_DIVIDE`
198			`set (unsigned long )($param + 0x0020) = 0d128`
199
200
201			`set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6 nfsaddrs=192.168.0.102:192.168.0.1:192.168.0.1:255.255.255.0:mappi: \0"`
202
203
204			`end`
205
206			`# Boot`
207			`define boot`
208			`set_kernel_parameters`
209			`debug_chaos`
210			`set $pc=0x08002000`
211			`set $fp=0`
212			`del b`
213			`si`
214			`end`
215
216			`# Restart`
217			`define restart`
218			`sdireset`
219			`sdireset`
220			`setup`
221			`load_modules`
222			`boot`
223			`end`
224
225			`sdireset`
226			`sdireset`
227			`file vmlinux`
228			`target m32rsdi`
229
230			`restart`
231			`boot`
232
233