1 |
3 |
xianfeng |
/*
|
2 |
|
|
* Driver for Philips UDA1341TS on Compaq iPAQ H3600 soundcard
|
3 |
|
|
* Copyright (C) 2002 Tomas Kasparek <tomas.kasparek@seznam.cz>
|
4 |
|
|
*
|
5 |
|
|
* This program is free software; you can redistribute it and/or modify
|
6 |
|
|
* it under the terms of the GNU General Public License.
|
7 |
|
|
*
|
8 |
|
|
* History:
|
9 |
|
|
*
|
10 |
|
|
* 2002-03-13 Tomas Kasparek initial release - based on h3600-uda1341.c from OSS
|
11 |
|
|
* 2002-03-20 Tomas Kasparek playback over ALSA is working
|
12 |
|
|
* 2002-03-28 Tomas Kasparek playback over OSS emulation is working
|
13 |
|
|
* 2002-03-29 Tomas Kasparek basic capture is working (native ALSA)
|
14 |
|
|
* 2002-03-29 Tomas Kasparek capture is working (OSS emulation)
|
15 |
|
|
* 2002-04-04 Tomas Kasparek better rates handling (allow non-standard rates)
|
16 |
|
|
* 2003-02-14 Brian Avery fixed full duplex mode, other updates
|
17 |
|
|
* 2003-02-20 Tomas Kasparek merged updates by Brian (except HAL)
|
18 |
|
|
* 2003-04-19 Jaroslav Kysela recoded DMA stuff to follow 2.4.18rmk3-hh24 kernel
|
19 |
|
|
* working suspend and resume
|
20 |
|
|
* 2003-04-28 Tomas Kasparek updated work by Jaroslav to compile it under 2.5.x again
|
21 |
|
|
* merged HAL layer (patches from Brian)
|
22 |
|
|
*/
|
23 |
|
|
|
24 |
|
|
/* $Id: sa11xx-uda1341.c,v 1.27 2005/12/07 09:13:42 cladisch Exp $ */
|
25 |
|
|
|
26 |
|
|
/***************************************************************************************************
|
27 |
|
|
*
|
28 |
|
|
* To understand what Alsa Drivers should be doing look at "Writing an Alsa Driver" by Takashi Iwai
|
29 |
|
|
* available in the Alsa doc section on the website
|
30 |
|
|
*
|
31 |
|
|
* A few notes to make things clearer. The UDA1341 is hooked up to Serial port 4 on the SA1100.
|
32 |
|
|
* We are using SSP mode to talk to the UDA1341. The UDA1341 bit & wordselect clocks are generated
|
33 |
|
|
* by this UART. Unfortunately, the clock only runs if the transmit buffer has something in it.
|
34 |
|
|
* So, if we are just recording, we feed the transmit DMA stream a bunch of 0x0000 so that the
|
35 |
|
|
* transmit buffer is full and the clock keeps going. The zeroes come from FLUSH_BASE_PHYS which
|
36 |
|
|
* is a mem loc that always decodes to 0's w/ no off chip access.
|
37 |
|
|
*
|
38 |
|
|
* Some alsa terminology:
|
39 |
|
|
* frame => num_channels * sample_size e.g stereo 16 bit is 2 * 16 = 32 bytes
|
40 |
|
|
* period => the least number of bytes that will generate an interrupt e.g. we have a 1024 byte
|
41 |
|
|
* buffer and 4 periods in the runtime structure this means we'll get an int every 256
|
42 |
|
|
* bytes or 4 times per buffer.
|
43 |
|
|
* A number of the sizes are in frames rather than bytes, use frames_to_bytes and
|
44 |
|
|
* bytes_to_frames to convert. The easiest way to tell the units is to look at the
|
45 |
|
|
* type i.e. runtime-> buffer_size is in frames and its type is snd_pcm_uframes_t
|
46 |
|
|
*
|
47 |
|
|
* Notes about the pointer fxn:
|
48 |
|
|
* The pointer fxn needs to return the offset into the dma buffer in frames.
|
49 |
|
|
* Interrupts must be blocked before calling the dma_get_pos fxn to avoid race with interrupts.
|
50 |
|
|
*
|
51 |
|
|
* Notes about pause/resume
|
52 |
|
|
* Implementing this would be complicated so it's skipped. The problem case is:
|
53 |
|
|
* A full duplex connection is going, then play is paused. At this point you need to start xmitting
|
54 |
|
|
* 0's to keep the record active which means you cant just freeze the dma and resume it later you'd
|
55 |
|
|
* need to save off the dma info, and restore it properly on a resume. Yeach!
|
56 |
|
|
*
|
57 |
|
|
* Notes about transfer methods:
|
58 |
|
|
* The async write calls fail. I probably need to implement something else to support them?
|
59 |
|
|
*
|
60 |
|
|
***************************************************************************************************/
|
61 |
|
|
|
62 |
|
|
#include <sound/driver.h>
|
63 |
|
|
#include <linux/module.h>
|
64 |
|
|
#include <linux/moduleparam.h>
|
65 |
|
|
#include <linux/init.h>
|
66 |
|
|
#include <linux/err.h>
|
67 |
|
|
#include <linux/platform_device.h>
|
68 |
|
|
#include <linux/errno.h>
|
69 |
|
|
#include <linux/ioctl.h>
|
70 |
|
|
#include <linux/delay.h>
|
71 |
|
|
#include <linux/slab.h>
|
72 |
|
|
|
73 |
|
|
#ifdef CONFIG_PM
|
74 |
|
|
#include <linux/pm.h>
|
75 |
|
|
#endif
|
76 |
|
|
|
77 |
|
|
#include <asm/hardware.h>
|
78 |
|
|
#include <asm/arch/h3600.h>
|
79 |
|
|
#include <asm/mach-types.h>
|
80 |
|
|
#include <asm/dma.h>
|
81 |
|
|
|
82 |
|
|
#include <sound/core.h>
|
83 |
|
|
#include <sound/pcm.h>
|
84 |
|
|
#include <sound/initval.h>
|
85 |
|
|
|
86 |
|
|
#include <linux/l3/l3.h>
|
87 |
|
|
|
88 |
|
|
#undef DEBUG_MODE
|
89 |
|
|
#undef DEBUG_FUNCTION_NAMES
|
90 |
|
|
#include <sound/uda1341.h>
|
91 |
|
|
|
92 |
|
|
/*
|
93 |
|
|
* FIXME: Is this enough as autodetection of 2.4.X-rmkY-hhZ kernels?
|
94 |
|
|
* We use DMA stuff from 2.4.18-rmk3-hh24 here to be able to compile this
|
95 |
|
|
* module for Familiar 0.6.1
|
96 |
|
|
*/
|
97 |
|
|
|
98 |
|
|
/* {{{ Type definitions */
|
99 |
|
|
|
100 |
|
|
MODULE_AUTHOR("Tomas Kasparek <tomas.kasparek@seznam.cz>");
|
101 |
|
|
MODULE_LICENSE("GPL");
|
102 |
|
|
MODULE_DESCRIPTION("SA1100/SA1111 + UDA1341TS driver for ALSA");
|
103 |
|
|
MODULE_SUPPORTED_DEVICE("{{UDA1341,iPAQ H3600 UDA1341TS}}");
|
104 |
|
|
|
105 |
|
|
static char *id; /* ID for this card */
|
106 |
|
|
|
107 |
|
|
module_param(id, charp, 0444);
|
108 |
|
|
MODULE_PARM_DESC(id, "ID string for SA1100/SA1111 + UDA1341TS soundcard.");
|
109 |
|
|
|
110 |
|
|
struct audio_stream {
|
111 |
|
|
char *id; /* identification string */
|
112 |
|
|
int stream_id; /* numeric identification */
|
113 |
|
|
dma_device_t dma_dev; /* device identifier for DMA */
|
114 |
|
|
#ifdef HH_VERSION
|
115 |
|
|
dmach_t dmach; /* dma channel identification */
|
116 |
|
|
#else
|
117 |
|
|
dma_regs_t *dma_regs; /* points to our DMA registers */
|
118 |
|
|
#endif
|
119 |
|
|
unsigned int active:1; /* we are using this stream for transfer now */
|
120 |
|
|
int period; /* current transfer period */
|
121 |
|
|
int periods; /* current count of periods registerd in the DMA engine */
|
122 |
|
|
int tx_spin; /* are we recoding - flag used to do DMA trans. for sync */
|
123 |
|
|
unsigned int old_offset;
|
124 |
|
|
spinlock_t dma_lock; /* for locking in DMA operations (see dma-sa1100.c in the kernel) */
|
125 |
|
|
struct snd_pcm_substream *stream;
|
126 |
|
|
};
|
127 |
|
|
|
128 |
|
|
struct sa11xx_uda1341 {
|
129 |
|
|
struct snd_card *card;
|
130 |
|
|
struct l3_client *uda1341;
|
131 |
|
|
struct snd_pcm *pcm;
|
132 |
|
|
long samplerate;
|
133 |
|
|
struct audio_stream s[2]; /* playback & capture */
|
134 |
|
|
};
|
135 |
|
|
|
136 |
|
|
static unsigned int rates[] = {
|
137 |
|
|
8000, 10666, 10985, 14647,
|
138 |
|
|
16000, 21970, 22050, 24000,
|
139 |
|
|
29400, 32000, 44100, 48000,
|
140 |
|
|
};
|
141 |
|
|
|
142 |
|
|
static struct snd_pcm_hw_constraint_list hw_constraints_rates = {
|
143 |
|
|
.count = ARRAY_SIZE(rates),
|
144 |
|
|
.list = rates,
|
145 |
|
|
.mask = 0,
|
146 |
|
|
};
|
147 |
|
|
|
148 |
|
|
static struct platform_device *device;
|
149 |
|
|
|
150 |
|
|
/* }}} */
|
151 |
|
|
|
152 |
|
|
/* {{{ Clock and sample rate stuff */
|
153 |
|
|
|
154 |
|
|
/*
|
155 |
|
|
* Stop-gap solution until rest of hh.org HAL stuff is merged.
|
156 |
|
|
*/
|
157 |
|
|
#define GPIO_H3600_CLK_SET0 GPIO_GPIO (12)
|
158 |
|
|
#define GPIO_H3600_CLK_SET1 GPIO_GPIO (13)
|
159 |
|
|
|
160 |
|
|
#ifdef CONFIG_SA1100_H3XXX
|
161 |
|
|
#define clr_sa11xx_uda1341_egpio(x) clr_h3600_egpio(x)
|
162 |
|
|
#define set_sa11xx_uda1341_egpio(x) set_h3600_egpio(x)
|
163 |
|
|
#else
|
164 |
|
|
#error This driver could serve H3x00 handhelds only!
|
165 |
|
|
#endif
|
166 |
|
|
|
167 |
|
|
static void sa11xx_uda1341_set_audio_clock(long val)
|
168 |
|
|
{
|
169 |
|
|
switch (val) {
|
170 |
|
|
case 24000: case 32000: case 48000: /* 00: 12.288 MHz */
|
171 |
|
|
GPCR = GPIO_H3600_CLK_SET0 | GPIO_H3600_CLK_SET1;
|
172 |
|
|
break;
|
173 |
|
|
|
174 |
|
|
case 22050: case 29400: case 44100: /* 01: 11.2896 MHz */
|
175 |
|
|
GPSR = GPIO_H3600_CLK_SET0;
|
176 |
|
|
GPCR = GPIO_H3600_CLK_SET1;
|
177 |
|
|
break;
|
178 |
|
|
|
179 |
|
|
case 8000: case 10666: case 16000: /* 10: 4.096 MHz */
|
180 |
|
|
GPCR = GPIO_H3600_CLK_SET0;
|
181 |
|
|
GPSR = GPIO_H3600_CLK_SET1;
|
182 |
|
|
break;
|
183 |
|
|
|
184 |
|
|
case 10985: case 14647: case 21970: /* 11: 5.6245 MHz */
|
185 |
|
|
GPSR = GPIO_H3600_CLK_SET0 | GPIO_H3600_CLK_SET1;
|
186 |
|
|
break;
|
187 |
|
|
}
|
188 |
|
|
}
|
189 |
|
|
|
190 |
|
|
static void sa11xx_uda1341_set_samplerate(struct sa11xx_uda1341 *sa11xx_uda1341, long rate)
|
191 |
|
|
{
|
192 |
|
|
int clk_div = 0;
|
193 |
|
|
int clk=0;
|
194 |
|
|
|
195 |
|
|
/* We don't want to mess with clocks when frames are in flight */
|
196 |
|
|
Ser4SSCR0 &= ~SSCR0_SSE;
|
197 |
|
|
/* wait for any frame to complete */
|
198 |
|
|
udelay(125);
|
199 |
|
|
|
200 |
|
|
/*
|
201 |
|
|
* We have the following clock sources:
|
202 |
|
|
* 4.096 MHz, 5.6245 MHz, 11.2896 MHz, 12.288 MHz
|
203 |
|
|
* Those can be divided either by 256, 384 or 512.
|
204 |
|
|
* This makes up 12 combinations for the following samplerates...
|
205 |
|
|
*/
|
206 |
|
|
if (rate >= 48000)
|
207 |
|
|
rate = 48000;
|
208 |
|
|
else if (rate >= 44100)
|
209 |
|
|
rate = 44100;
|
210 |
|
|
else if (rate >= 32000)
|
211 |
|
|
rate = 32000;
|
212 |
|
|
else if (rate >= 29400)
|
213 |
|
|
rate = 29400;
|
214 |
|
|
else if (rate >= 24000)
|
215 |
|
|
rate = 24000;
|
216 |
|
|
else if (rate >= 22050)
|
217 |
|
|
rate = 22050;
|
218 |
|
|
else if (rate >= 21970)
|
219 |
|
|
rate = 21970;
|
220 |
|
|
else if (rate >= 16000)
|
221 |
|
|
rate = 16000;
|
222 |
|
|
else if (rate >= 14647)
|
223 |
|
|
rate = 14647;
|
224 |
|
|
else if (rate >= 10985)
|
225 |
|
|
rate = 10985;
|
226 |
|
|
else if (rate >= 10666)
|
227 |
|
|
rate = 10666;
|
228 |
|
|
else
|
229 |
|
|
rate = 8000;
|
230 |
|
|
|
231 |
|
|
/* Set the external clock generator */
|
232 |
|
|
|
233 |
|
|
sa11xx_uda1341_set_audio_clock(rate);
|
234 |
|
|
|
235 |
|
|
/* Select the clock divisor */
|
236 |
|
|
switch (rate) {
|
237 |
|
|
case 8000:
|
238 |
|
|
case 10985:
|
239 |
|
|
case 22050:
|
240 |
|
|
case 24000:
|
241 |
|
|
clk = F512;
|
242 |
|
|
clk_div = SSCR0_SerClkDiv(16);
|
243 |
|
|
break;
|
244 |
|
|
case 16000:
|
245 |
|
|
case 21970:
|
246 |
|
|
case 44100:
|
247 |
|
|
case 48000:
|
248 |
|
|
clk = F256;
|
249 |
|
|
clk_div = SSCR0_SerClkDiv(8);
|
250 |
|
|
break;
|
251 |
|
|
case 10666:
|
252 |
|
|
case 14647:
|
253 |
|
|
case 29400:
|
254 |
|
|
case 32000:
|
255 |
|
|
clk = F384;
|
256 |
|
|
clk_div = SSCR0_SerClkDiv(12);
|
257 |
|
|
break;
|
258 |
|
|
}
|
259 |
|
|
|
260 |
|
|
/* FMT setting should be moved away when other FMTs are added (FIXME) */
|
261 |
|
|
l3_command(sa11xx_uda1341->uda1341, CMD_FORMAT, (void *)LSB16);
|
262 |
|
|
|
263 |
|
|
l3_command(sa11xx_uda1341->uda1341, CMD_FS, (void *)clk);
|
264 |
|
|
Ser4SSCR0 = (Ser4SSCR0 & ~0xff00) + clk_div + SSCR0_SSE;
|
265 |
|
|
sa11xx_uda1341->samplerate = rate;
|
266 |
|
|
}
|
267 |
|
|
|
268 |
|
|
/* }}} */
|
269 |
|
|
|
270 |
|
|
/* {{{ HW init and shutdown */
|
271 |
|
|
|
272 |
|
|
static void sa11xx_uda1341_audio_init(struct sa11xx_uda1341 *sa11xx_uda1341)
|
273 |
|
|
{
|
274 |
|
|
unsigned long flags;
|
275 |
|
|
|
276 |
|
|
/* Setup DMA stuff */
|
277 |
|
|
sa11xx_uda1341->s[SNDRV_PCM_STREAM_PLAYBACK].id = "UDA1341 out";
|
278 |
|
|
sa11xx_uda1341->s[SNDRV_PCM_STREAM_PLAYBACK].stream_id = SNDRV_PCM_STREAM_PLAYBACK;
|
279 |
|
|
sa11xx_uda1341->s[SNDRV_PCM_STREAM_PLAYBACK].dma_dev = DMA_Ser4SSPWr;
|
280 |
|
|
|
281 |
|
|
sa11xx_uda1341->s[SNDRV_PCM_STREAM_CAPTURE].id = "UDA1341 in";
|
282 |
|
|
sa11xx_uda1341->s[SNDRV_PCM_STREAM_CAPTURE].stream_id = SNDRV_PCM_STREAM_CAPTURE;
|
283 |
|
|
sa11xx_uda1341->s[SNDRV_PCM_STREAM_CAPTURE].dma_dev = DMA_Ser4SSPRd;
|
284 |
|
|
|
285 |
|
|
/* Initialize the UDA1341 internal state */
|
286 |
|
|
|
287 |
|
|
/* Setup the uarts */
|
288 |
|
|
local_irq_save(flags);
|
289 |
|
|
GAFR |= (GPIO_SSP_CLK);
|
290 |
|
|
GPDR &= ~(GPIO_SSP_CLK);
|
291 |
|
|
Ser4SSCR0 = 0;
|
292 |
|
|
Ser4SSCR0 = SSCR0_DataSize(16) + SSCR0_TI + SSCR0_SerClkDiv(8);
|
293 |
|
|
Ser4SSCR1 = SSCR1_SClkIactL + SSCR1_SClk1P + SSCR1_ExtClk;
|
294 |
|
|
Ser4SSCR0 |= SSCR0_SSE;
|
295 |
|
|
local_irq_restore(flags);
|
296 |
|
|
|
297 |
|
|
/* Enable the audio power */
|
298 |
|
|
|
299 |
|
|
clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_CODEC_NRESET);
|
300 |
|
|
set_sa11xx_uda1341_egpio(IPAQ_EGPIO_AUDIO_ON);
|
301 |
|
|
set_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE);
|
302 |
|
|
|
303 |
|
|
/* Wait for the UDA1341 to wake up */
|
304 |
|
|
mdelay(1); //FIXME - was removed by Perex - Why?
|
305 |
|
|
|
306 |
|
|
/* Initialize the UDA1341 internal state */
|
307 |
|
|
l3_open(sa11xx_uda1341->uda1341);
|
308 |
|
|
|
309 |
|
|
/* external clock configuration (after l3_open - regs must be initialized */
|
310 |
|
|
sa11xx_uda1341_set_samplerate(sa11xx_uda1341, sa11xx_uda1341->samplerate);
|
311 |
|
|
|
312 |
|
|
/* Wait for the UDA1341 to wake up */
|
313 |
|
|
set_sa11xx_uda1341_egpio(IPAQ_EGPIO_CODEC_NRESET);
|
314 |
|
|
mdelay(1);
|
315 |
|
|
|
316 |
|
|
/* make the left and right channels unswapped (flip the WS latch) */
|
317 |
|
|
Ser4SSDR = 0;
|
318 |
|
|
|
319 |
|
|
clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE);
|
320 |
|
|
}
|
321 |
|
|
|
322 |
|
|
static void sa11xx_uda1341_audio_shutdown(struct sa11xx_uda1341 *sa11xx_uda1341)
|
323 |
|
|
{
|
324 |
|
|
/* mute on */
|
325 |
|
|
set_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE);
|
326 |
|
|
|
327 |
|
|
/* disable the audio power and all signals leading to the audio chip */
|
328 |
|
|
l3_close(sa11xx_uda1341->uda1341);
|
329 |
|
|
Ser4SSCR0 = 0;
|
330 |
|
|
clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_CODEC_NRESET);
|
331 |
|
|
|
332 |
|
|
/* power off and mute off */
|
333 |
|
|
/* FIXME - is muting off necesary??? */
|
334 |
|
|
|
335 |
|
|
clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_AUDIO_ON);
|
336 |
|
|
clr_sa11xx_uda1341_egpio(IPAQ_EGPIO_QMUTE);
|
337 |
|
|
}
|
338 |
|
|
|
339 |
|
|
/* }}} */
|
340 |
|
|
|
341 |
|
|
/* {{{ DMA staff */
|
342 |
|
|
|
343 |
|
|
/*
|
344 |
|
|
* these are the address and sizes used to fill the xmit buffer
|
345 |
|
|
* so we can get a clock in record only mode
|
346 |
|
|
*/
|
347 |
|
|
#define FORCE_CLOCK_ADDR (dma_addr_t)FLUSH_BASE_PHYS
|
348 |
|
|
#define FORCE_CLOCK_SIZE 4096 // was 2048
|
349 |
|
|
|
350 |
|
|
// FIXME Why this value exactly - wrote comment
|
351 |
|
|
#define DMA_BUF_SIZE 8176 /* <= MAX_DMA_SIZE from asm/arch-sa1100/dma.h */
|
352 |
|
|
|
353 |
|
|
#ifdef HH_VERSION
|
354 |
|
|
|
355 |
|
|
static int audio_dma_request(struct audio_stream *s, void (*callback)(void *, int))
|
356 |
|
|
{
|
357 |
|
|
int ret;
|
358 |
|
|
|
359 |
|
|
ret = sa1100_request_dma(&s->dmach, s->id, s->dma_dev);
|
360 |
|
|
if (ret < 0) {
|
361 |
|
|
printk(KERN_ERR "unable to grab audio dma 0x%x\n", s->dma_dev);
|
362 |
|
|
return ret;
|
363 |
|
|
}
|
364 |
|
|
sa1100_dma_set_callback(s->dmach, callback);
|
365 |
|
|
return 0;
|
366 |
|
|
}
|
367 |
|
|
|
368 |
|
|
static inline void audio_dma_free(struct audio_stream *s)
|
369 |
|
|
{
|
370 |
|
|
sa1100_free_dma(s->dmach);
|
371 |
|
|
s->dmach = -1;
|
372 |
|
|
}
|
373 |
|
|
|
374 |
|
|
#else
|
375 |
|
|
|
376 |
|
|
static int audio_dma_request(struct audio_stream *s, void (*callback)(void *))
|
377 |
|
|
{
|
378 |
|
|
int ret;
|
379 |
|
|
|
380 |
|
|
ret = sa1100_request_dma(s->dma_dev, s->id, callback, s, &s->dma_regs);
|
381 |
|
|
if (ret < 0)
|
382 |
|
|
printk(KERN_ERR "unable to grab audio dma 0x%x\n", s->dma_dev);
|
383 |
|
|
return ret;
|
384 |
|
|
}
|
385 |
|
|
|
386 |
|
|
static void audio_dma_free(struct audio_stream *s)
|
387 |
|
|
{
|
388 |
|
|
sa1100_free_dma(s->dma_regs);
|
389 |
|
|
s->dma_regs = 0;
|
390 |
|
|
}
|
391 |
|
|
|
392 |
|
|
#endif
|
393 |
|
|
|
394 |
|
|
static u_int audio_get_dma_pos(struct audio_stream *s)
|
395 |
|
|
{
|
396 |
|
|
struct snd_pcm_substream *substream = s->stream;
|
397 |
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
398 |
|
|
unsigned int offset;
|
399 |
|
|
unsigned long flags;
|
400 |
|
|
dma_addr_t addr;
|
401 |
|
|
|
402 |
|
|
// this must be called w/ interrupts locked out see dma-sa1100.c in the kernel
|
403 |
|
|
spin_lock_irqsave(&s->dma_lock, flags);
|
404 |
|
|
#ifdef HH_VERSION
|
405 |
|
|
sa1100_dma_get_current(s->dmach, NULL, &addr);
|
406 |
|
|
#else
|
407 |
|
|
addr = sa1100_get_dma_pos((s)->dma_regs);
|
408 |
|
|
#endif
|
409 |
|
|
offset = addr - runtime->dma_addr;
|
410 |
|
|
spin_unlock_irqrestore(&s->dma_lock, flags);
|
411 |
|
|
|
412 |
|
|
offset = bytes_to_frames(runtime,offset);
|
413 |
|
|
if (offset >= runtime->buffer_size)
|
414 |
|
|
offset = 0;
|
415 |
|
|
|
416 |
|
|
return offset;
|
417 |
|
|
}
|
418 |
|
|
|
419 |
|
|
/*
|
420 |
|
|
* this stops the dma and clears the dma ptrs
|
421 |
|
|
*/
|
422 |
|
|
static void audio_stop_dma(struct audio_stream *s)
|
423 |
|
|
{
|
424 |
|
|
unsigned long flags;
|
425 |
|
|
|
426 |
|
|
spin_lock_irqsave(&s->dma_lock, flags);
|
427 |
|
|
s->active = 0;
|
428 |
|
|
s->period = 0;
|
429 |
|
|
/* this stops the dma channel and clears the buffer ptrs */
|
430 |
|
|
#ifdef HH_VERSION
|
431 |
|
|
sa1100_dma_flush_all(s->dmach);
|
432 |
|
|
#else
|
433 |
|
|
sa1100_clear_dma(s->dma_regs);
|
434 |
|
|
#endif
|
435 |
|
|
spin_unlock_irqrestore(&s->dma_lock, flags);
|
436 |
|
|
}
|
437 |
|
|
|
438 |
|
|
static void audio_process_dma(struct audio_stream *s)
|
439 |
|
|
{
|
440 |
|
|
struct snd_pcm_substream *substream = s->stream;
|
441 |
|
|
struct snd_pcm_runtime *runtime;
|
442 |
|
|
unsigned int dma_size;
|
443 |
|
|
unsigned int offset;
|
444 |
|
|
int ret;
|
445 |
|
|
|
446 |
|
|
/* we are requested to process synchronization DMA transfer */
|
447 |
|
|
if (s->tx_spin) {
|
448 |
|
|
snd_assert(s->stream_id == SNDRV_PCM_STREAM_PLAYBACK, return);
|
449 |
|
|
/* fill the xmit dma buffers and return */
|
450 |
|
|
#ifdef HH_VERSION
|
451 |
|
|
sa1100_dma_set_spin(s->dmach, FORCE_CLOCK_ADDR, FORCE_CLOCK_SIZE);
|
452 |
|
|
#else
|
453 |
|
|
while (1) {
|
454 |
|
|
ret = sa1100_start_dma(s->dma_regs, FORCE_CLOCK_ADDR, FORCE_CLOCK_SIZE);
|
455 |
|
|
if (ret)
|
456 |
|
|
return;
|
457 |
|
|
}
|
458 |
|
|
#endif
|
459 |
|
|
return;
|
460 |
|
|
}
|
461 |
|
|
|
462 |
|
|
/* must be set here - only valid for running streams, not for forced_clock dma fills */
|
463 |
|
|
runtime = substream->runtime;
|
464 |
|
|
while (s->active && s->periods < runtime->periods) {
|
465 |
|
|
dma_size = frames_to_bytes(runtime, runtime->period_size);
|
466 |
|
|
if (s->old_offset) {
|
467 |
|
|
/* a little trick, we need resume from old position */
|
468 |
|
|
offset = frames_to_bytes(runtime, s->old_offset - 1);
|
469 |
|
|
s->old_offset = 0;
|
470 |
|
|
s->periods = 0;
|
471 |
|
|
s->period = offset / dma_size;
|
472 |
|
|
offset %= dma_size;
|
473 |
|
|
dma_size = dma_size - offset;
|
474 |
|
|
if (!dma_size)
|
475 |
|
|
continue; /* special case */
|
476 |
|
|
} else {
|
477 |
|
|
offset = dma_size * s->period;
|
478 |
|
|
snd_assert(dma_size <= DMA_BUF_SIZE, );
|
479 |
|
|
}
|
480 |
|
|
#ifdef HH_VERSION
|
481 |
|
|
ret = sa1100_dma_queue_buffer(s->dmach, s, runtime->dma_addr + offset, dma_size);
|
482 |
|
|
if (ret)
|
483 |
|
|
return; //FIXME
|
484 |
|
|
#else
|
485 |
|
|
ret = sa1100_start_dma((s)->dma_regs, runtime->dma_addr + offset, dma_size);
|
486 |
|
|
if (ret) {
|
487 |
|
|
printk(KERN_ERR "audio_process_dma: cannot queue DMA buffer (%i)\n", ret);
|
488 |
|
|
return;
|
489 |
|
|
}
|
490 |
|
|
#endif
|
491 |
|
|
|
492 |
|
|
s->period++;
|
493 |
|
|
s->period %= runtime->periods;
|
494 |
|
|
s->periods++;
|
495 |
|
|
}
|
496 |
|
|
}
|
497 |
|
|
|
498 |
|
|
#ifdef HH_VERSION
|
499 |
|
|
static void audio_dma_callback(void *data, int size)
|
500 |
|
|
#else
|
501 |
|
|
static void audio_dma_callback(void *data)
|
502 |
|
|
#endif
|
503 |
|
|
{
|
504 |
|
|
struct audio_stream *s = data;
|
505 |
|
|
|
506 |
|
|
/*
|
507 |
|
|
* If we are getting a callback for an active stream then we inform
|
508 |
|
|
* the PCM middle layer we've finished a period
|
509 |
|
|
*/
|
510 |
|
|
if (s->active)
|
511 |
|
|
snd_pcm_period_elapsed(s->stream);
|
512 |
|
|
|
513 |
|
|
spin_lock(&s->dma_lock);
|
514 |
|
|
if (!s->tx_spin && s->periods > 0)
|
515 |
|
|
s->periods--;
|
516 |
|
|
audio_process_dma(s);
|
517 |
|
|
spin_unlock(&s->dma_lock);
|
518 |
|
|
}
|
519 |
|
|
|
520 |
|
|
/* }}} */
|
521 |
|
|
|
522 |
|
|
/* {{{ PCM setting */
|
523 |
|
|
|
524 |
|
|
/* {{{ trigger & timer */
|
525 |
|
|
|
526 |
|
|
static int snd_sa11xx_uda1341_trigger(struct snd_pcm_substream *substream, int cmd)
|
527 |
|
|
{
|
528 |
|
|
struct sa11xx_uda1341 *chip = snd_pcm_substream_chip(substream);
|
529 |
|
|
int stream_id = substream->pstr->stream;
|
530 |
|
|
struct audio_stream *s = &chip->s[stream_id];
|
531 |
|
|
struct audio_stream *s1 = &chip->s[stream_id ^ 1];
|
532 |
|
|
int err = 0;
|
533 |
|
|
|
534 |
|
|
/* note local interrupts are already disabled in the midlevel code */
|
535 |
|
|
spin_lock(&s->dma_lock);
|
536 |
|
|
switch (cmd) {
|
537 |
|
|
case SNDRV_PCM_TRIGGER_START:
|
538 |
|
|
/* now we need to make sure a record only stream has a clock */
|
539 |
|
|
if (stream_id == SNDRV_PCM_STREAM_CAPTURE && !s1->active) {
|
540 |
|
|
/* we need to force fill the xmit DMA with zeros */
|
541 |
|
|
s1->tx_spin = 1;
|
542 |
|
|
audio_process_dma(s1);
|
543 |
|
|
}
|
544 |
|
|
/* this case is when you were recording then you turn on a
|
545 |
|
|
* playback stream so we stop (also clears it) the dma first,
|
546 |
|
|
* clear the sync flag and then we let it turned on
|
547 |
|
|
*/
|
548 |
|
|
else {
|
549 |
|
|
s->tx_spin = 0;
|
550 |
|
|
}
|
551 |
|
|
|
552 |
|
|
/* requested stream startup */
|
553 |
|
|
s->active = 1;
|
554 |
|
|
audio_process_dma(s);
|
555 |
|
|
break;
|
556 |
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
557 |
|
|
/* requested stream shutdown */
|
558 |
|
|
audio_stop_dma(s);
|
559 |
|
|
|
560 |
|
|
/*
|
561 |
|
|
* now we need to make sure a record only stream has a clock
|
562 |
|
|
* so if we're stopping a playback with an active capture
|
563 |
|
|
* we need to turn the 0 fill dma on for the xmit side
|
564 |
|
|
*/
|
565 |
|
|
if (stream_id == SNDRV_PCM_STREAM_PLAYBACK && s1->active) {
|
566 |
|
|
/* we need to force fill the xmit DMA with zeros */
|
567 |
|
|
s->tx_spin = 1;
|
568 |
|
|
audio_process_dma(s);
|
569 |
|
|
}
|
570 |
|
|
/*
|
571 |
|
|
* we killed a capture only stream, so we should also kill
|
572 |
|
|
* the zero fill transmit
|
573 |
|
|
*/
|
574 |
|
|
else {
|
575 |
|
|
if (s1->tx_spin) {
|
576 |
|
|
s1->tx_spin = 0;
|
577 |
|
|
audio_stop_dma(s1);
|
578 |
|
|
}
|
579 |
|
|
}
|
580 |
|
|
|
581 |
|
|
break;
|
582 |
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
583 |
|
|
s->active = 0;
|
584 |
|
|
#ifdef HH_VERSION
|
585 |
|
|
sa1100_dma_stop(s->dmach);
|
586 |
|
|
#else
|
587 |
|
|
//FIXME - DMA API
|
588 |
|
|
#endif
|
589 |
|
|
s->old_offset = audio_get_dma_pos(s) + 1;
|
590 |
|
|
#ifdef HH_VERSION
|
591 |
|
|
sa1100_dma_flush_all(s->dmach);
|
592 |
|
|
#else
|
593 |
|
|
//FIXME - DMA API
|
594 |
|
|
#endif
|
595 |
|
|
s->periods = 0;
|
596 |
|
|
break;
|
597 |
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
598 |
|
|
s->active = 1;
|
599 |
|
|
s->tx_spin = 0;
|
600 |
|
|
audio_process_dma(s);
|
601 |
|
|
if (stream_id == SNDRV_PCM_STREAM_CAPTURE && !s1->active) {
|
602 |
|
|
s1->tx_spin = 1;
|
603 |
|
|
audio_process_dma(s1);
|
604 |
|
|
}
|
605 |
|
|
break;
|
606 |
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
607 |
|
|
#ifdef HH_VERSION
|
608 |
|
|
sa1100_dma_stop(s->dmach);
|
609 |
|
|
#else
|
610 |
|
|
//FIXME - DMA API
|
611 |
|
|
#endif
|
612 |
|
|
s->active = 0;
|
613 |
|
|
if (stream_id == SNDRV_PCM_STREAM_PLAYBACK) {
|
614 |
|
|
if (s1->active) {
|
615 |
|
|
s->tx_spin = 1;
|
616 |
|
|
s->old_offset = audio_get_dma_pos(s) + 1;
|
617 |
|
|
#ifdef HH_VERSION
|
618 |
|
|
sa1100_dma_flush_all(s->dmach);
|
619 |
|
|
#else
|
620 |
|
|
//FIXME - DMA API
|
621 |
|
|
#endif
|
622 |
|
|
audio_process_dma(s);
|
623 |
|
|
}
|
624 |
|
|
} else {
|
625 |
|
|
if (s1->tx_spin) {
|
626 |
|
|
s1->tx_spin = 0;
|
627 |
|
|
#ifdef HH_VERSION
|
628 |
|
|
sa1100_dma_flush_all(s1->dmach);
|
629 |
|
|
#else
|
630 |
|
|
//FIXME - DMA API
|
631 |
|
|
#endif
|
632 |
|
|
}
|
633 |
|
|
}
|
634 |
|
|
break;
|
635 |
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
636 |
|
|
s->active = 1;
|
637 |
|
|
if (s->old_offset) {
|
638 |
|
|
s->tx_spin = 0;
|
639 |
|
|
audio_process_dma(s);
|
640 |
|
|
break;
|
641 |
|
|
}
|
642 |
|
|
if (stream_id == SNDRV_PCM_STREAM_CAPTURE && !s1->active) {
|
643 |
|
|
s1->tx_spin = 1;
|
644 |
|
|
audio_process_dma(s1);
|
645 |
|
|
}
|
646 |
|
|
#ifdef HH_VERSION
|
647 |
|
|
sa1100_dma_resume(s->dmach);
|
648 |
|
|
#else
|
649 |
|
|
//FIXME - DMA API
|
650 |
|
|
#endif
|
651 |
|
|
break;
|
652 |
|
|
default:
|
653 |
|
|
err = -EINVAL;
|
654 |
|
|
break;
|
655 |
|
|
}
|
656 |
|
|
spin_unlock(&s->dma_lock);
|
657 |
|
|
return err;
|
658 |
|
|
}
|
659 |
|
|
|
660 |
|
|
static int snd_sa11xx_uda1341_prepare(struct snd_pcm_substream *substream)
|
661 |
|
|
{
|
662 |
|
|
struct sa11xx_uda1341 *chip = snd_pcm_substream_chip(substream);
|
663 |
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
664 |
|
|
struct audio_stream *s = &chip->s[substream->pstr->stream];
|
665 |
|
|
|
666 |
|
|
/* set requested samplerate */
|
667 |
|
|
sa11xx_uda1341_set_samplerate(chip, runtime->rate);
|
668 |
|
|
|
669 |
|
|
/* set requestd format when available */
|
670 |
|
|
/* set FMT here !!! FIXME */
|
671 |
|
|
|
672 |
|
|
s->period = 0;
|
673 |
|
|
s->periods = 0;
|
674 |
|
|
|
675 |
|
|
return 0;
|
676 |
|
|
}
|
677 |
|
|
|
678 |
|
|
static snd_pcm_uframes_t snd_sa11xx_uda1341_pointer(struct snd_pcm_substream *substream)
|
679 |
|
|
{
|
680 |
|
|
struct sa11xx_uda1341 *chip = snd_pcm_substream_chip(substream);
|
681 |
|
|
return audio_get_dma_pos(&chip->s[substream->pstr->stream]);
|
682 |
|
|
}
|
683 |
|
|
|
684 |
|
|
/* }}} */
|
685 |
|
|
|
686 |
|
|
static struct snd_pcm_hardware snd_sa11xx_uda1341_capture =
|
687 |
|
|
{
|
688 |
|
|
.info = (SNDRV_PCM_INFO_INTERLEAVED |
|
689 |
|
|
SNDRV_PCM_INFO_BLOCK_TRANSFER |
|
690 |
|
|
SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
|
691 |
|
|
SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
|
692 |
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
693 |
|
|
.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\
|
694 |
|
|
SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |\
|
695 |
|
|
SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
|
696 |
|
|
SNDRV_PCM_RATE_KNOT),
|
697 |
|
|
.rate_min = 8000,
|
698 |
|
|
.rate_max = 48000,
|
699 |
|
|
.channels_min = 2,
|
700 |
|
|
.channels_max = 2,
|
701 |
|
|
.buffer_bytes_max = 64*1024,
|
702 |
|
|
.period_bytes_min = 64,
|
703 |
|
|
.period_bytes_max = DMA_BUF_SIZE,
|
704 |
|
|
.periods_min = 2,
|
705 |
|
|
.periods_max = 255,
|
706 |
|
|
.fifo_size = 0,
|
707 |
|
|
};
|
708 |
|
|
|
709 |
|
|
static struct snd_pcm_hardware snd_sa11xx_uda1341_playback =
|
710 |
|
|
{
|
711 |
|
|
.info = (SNDRV_PCM_INFO_INTERLEAVED |
|
712 |
|
|
SNDRV_PCM_INFO_BLOCK_TRANSFER |
|
713 |
|
|
SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
|
714 |
|
|
SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME),
|
715 |
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
716 |
|
|
.rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\
|
717 |
|
|
SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |\
|
718 |
|
|
SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
|
719 |
|
|
SNDRV_PCM_RATE_KNOT),
|
720 |
|
|
.rate_min = 8000,
|
721 |
|
|
.rate_max = 48000,
|
722 |
|
|
.channels_min = 2,
|
723 |
|
|
.channels_max = 2,
|
724 |
|
|
.buffer_bytes_max = 64*1024,
|
725 |
|
|
.period_bytes_min = 64,
|
726 |
|
|
.period_bytes_max = DMA_BUF_SIZE,
|
727 |
|
|
.periods_min = 2,
|
728 |
|
|
.periods_max = 255,
|
729 |
|
|
.fifo_size = 0,
|
730 |
|
|
};
|
731 |
|
|
|
732 |
|
|
static int snd_card_sa11xx_uda1341_open(struct snd_pcm_substream *substream)
|
733 |
|
|
{
|
734 |
|
|
struct sa11xx_uda1341 *chip = snd_pcm_substream_chip(substream);
|
735 |
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
736 |
|
|
int stream_id = substream->pstr->stream;
|
737 |
|
|
int err;
|
738 |
|
|
|
739 |
|
|
chip->s[stream_id].stream = substream;
|
740 |
|
|
|
741 |
|
|
if (stream_id == SNDRV_PCM_STREAM_PLAYBACK)
|
742 |
|
|
runtime->hw = snd_sa11xx_uda1341_playback;
|
743 |
|
|
else
|
744 |
|
|
runtime->hw = snd_sa11xx_uda1341_capture;
|
745 |
|
|
if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
|
746 |
|
|
return err;
|
747 |
|
|
if ((err = snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, &hw_constraints_rates)) < 0)
|
748 |
|
|
return err;
|
749 |
|
|
|
750 |
|
|
return 0;
|
751 |
|
|
}
|
752 |
|
|
|
753 |
|
|
static int snd_card_sa11xx_uda1341_close(struct snd_pcm_substream *substream)
|
754 |
|
|
{
|
755 |
|
|
struct sa11xx_uda1341 *chip = snd_pcm_substream_chip(substream);
|
756 |
|
|
|
757 |
|
|
chip->s[substream->pstr->stream].stream = NULL;
|
758 |
|
|
return 0;
|
759 |
|
|
}
|
760 |
|
|
|
761 |
|
|
/* {{{ HW params & free */
|
762 |
|
|
|
763 |
|
|
static int snd_sa11xx_uda1341_hw_params(struct snd_pcm_substream *substream,
|
764 |
|
|
struct snd_pcm_hw_params *hw_params)
|
765 |
|
|
{
|
766 |
|
|
|
767 |
|
|
return snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
|
768 |
|
|
}
|
769 |
|
|
|
770 |
|
|
static int snd_sa11xx_uda1341_hw_free(struct snd_pcm_substream *substream)
|
771 |
|
|
{
|
772 |
|
|
return snd_pcm_lib_free_pages(substream);
|
773 |
|
|
}
|
774 |
|
|
|
775 |
|
|
/* }}} */
|
776 |
|
|
|
777 |
|
|
static struct snd_pcm_ops snd_card_sa11xx_uda1341_playback_ops = {
|
778 |
|
|
.open = snd_card_sa11xx_uda1341_open,
|
779 |
|
|
.close = snd_card_sa11xx_uda1341_close,
|
780 |
|
|
.ioctl = snd_pcm_lib_ioctl,
|
781 |
|
|
.hw_params = snd_sa11xx_uda1341_hw_params,
|
782 |
|
|
.hw_free = snd_sa11xx_uda1341_hw_free,
|
783 |
|
|
.prepare = snd_sa11xx_uda1341_prepare,
|
784 |
|
|
.trigger = snd_sa11xx_uda1341_trigger,
|
785 |
|
|
.pointer = snd_sa11xx_uda1341_pointer,
|
786 |
|
|
};
|
787 |
|
|
|
788 |
|
|
static struct snd_pcm_ops snd_card_sa11xx_uda1341_capture_ops = {
|
789 |
|
|
.open = snd_card_sa11xx_uda1341_open,
|
790 |
|
|
.close = snd_card_sa11xx_uda1341_close,
|
791 |
|
|
.ioctl = snd_pcm_lib_ioctl,
|
792 |
|
|
.hw_params = snd_sa11xx_uda1341_hw_params,
|
793 |
|
|
.hw_free = snd_sa11xx_uda1341_hw_free,
|
794 |
|
|
.prepare = snd_sa11xx_uda1341_prepare,
|
795 |
|
|
.trigger = snd_sa11xx_uda1341_trigger,
|
796 |
|
|
.pointer = snd_sa11xx_uda1341_pointer,
|
797 |
|
|
};
|
798 |
|
|
|
799 |
|
|
static int __init snd_card_sa11xx_uda1341_pcm(struct sa11xx_uda1341 *sa11xx_uda1341, int device)
|
800 |
|
|
{
|
801 |
|
|
struct snd_pcm *pcm;
|
802 |
|
|
int err;
|
803 |
|
|
|
804 |
|
|
if ((err = snd_pcm_new(sa11xx_uda1341->card, "UDA1341 PCM", device, 1, 1, &pcm)) < 0)
|
805 |
|
|
return err;
|
806 |
|
|
|
807 |
|
|
/*
|
808 |
|
|
* this sets up our initial buffers and sets the dma_type to isa.
|
809 |
|
|
* isa works but I'm not sure why (or if) it's the right choice
|
810 |
|
|
* this may be too large, trying it for now
|
811 |
|
|
*/
|
812 |
|
|
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
|
813 |
|
|
snd_dma_isa_data(),
|
814 |
|
|
64*1024, 64*1024);
|
815 |
|
|
|
816 |
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_card_sa11xx_uda1341_playback_ops);
|
817 |
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_card_sa11xx_uda1341_capture_ops);
|
818 |
|
|
pcm->private_data = sa11xx_uda1341;
|
819 |
|
|
pcm->info_flags = 0;
|
820 |
|
|
strcpy(pcm->name, "UDA1341 PCM");
|
821 |
|
|
|
822 |
|
|
sa11xx_uda1341_audio_init(sa11xx_uda1341);
|
823 |
|
|
|
824 |
|
|
/* setup DMA controller */
|
825 |
|
|
audio_dma_request(&sa11xx_uda1341->s[SNDRV_PCM_STREAM_PLAYBACK], audio_dma_callback);
|
826 |
|
|
audio_dma_request(&sa11xx_uda1341->s[SNDRV_PCM_STREAM_CAPTURE], audio_dma_callback);
|
827 |
|
|
|
828 |
|
|
sa11xx_uda1341->pcm = pcm;
|
829 |
|
|
|
830 |
|
|
return 0;
|
831 |
|
|
}
|
832 |
|
|
|
833 |
|
|
/* }}} */
|
834 |
|
|
|
835 |
|
|
/* {{{ module init & exit */
|
836 |
|
|
|
837 |
|
|
#ifdef CONFIG_PM
|
838 |
|
|
|
839 |
|
|
static int snd_sa11xx_uda1341_suspend(struct platform_device *devptr,
|
840 |
|
|
pm_message_t state)
|
841 |
|
|
{
|
842 |
|
|
struct snd_card *card = platform_get_drvdata(devptr);
|
843 |
|
|
struct sa11xx_uda1341 *chip = card->private_data;
|
844 |
|
|
|
845 |
|
|
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
|
846 |
|
|
snd_pcm_suspend_all(chip->pcm);
|
847 |
|
|
#ifdef HH_VERSION
|
848 |
|
|
sa1100_dma_sleep(chip->s[SNDRV_PCM_STREAM_PLAYBACK].dmach);
|
849 |
|
|
sa1100_dma_sleep(chip->s[SNDRV_PCM_STREAM_CAPTURE].dmach);
|
850 |
|
|
#else
|
851 |
|
|
//FIXME
|
852 |
|
|
#endif
|
853 |
|
|
l3_command(chip->uda1341, CMD_SUSPEND, NULL);
|
854 |
|
|
sa11xx_uda1341_audio_shutdown(chip);
|
855 |
|
|
|
856 |
|
|
return 0;
|
857 |
|
|
}
|
858 |
|
|
|
859 |
|
|
static int snd_sa11xx_uda1341_resume(struct platform_device *devptr)
|
860 |
|
|
{
|
861 |
|
|
struct snd_card *card = platform_get_drvdata(devptr);
|
862 |
|
|
struct sa11xx_uda1341 *chip = card->private_data;
|
863 |
|
|
|
864 |
|
|
sa11xx_uda1341_audio_init(chip);
|
865 |
|
|
l3_command(chip->uda1341, CMD_RESUME, NULL);
|
866 |
|
|
#ifdef HH_VERSION
|
867 |
|
|
sa1100_dma_wakeup(chip->s[SNDRV_PCM_STREAM_PLAYBACK].dmach);
|
868 |
|
|
sa1100_dma_wakeup(chip->s[SNDRV_PCM_STREAM_CAPTURE].dmach);
|
869 |
|
|
#else
|
870 |
|
|
//FIXME
|
871 |
|
|
#endif
|
872 |
|
|
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
|
873 |
|
|
return 0;
|
874 |
|
|
}
|
875 |
|
|
#endif /* COMFIG_PM */
|
876 |
|
|
|
877 |
|
|
void snd_sa11xx_uda1341_free(struct snd_card *card)
|
878 |
|
|
{
|
879 |
|
|
struct sa11xx_uda1341 *chip = card->private_data;
|
880 |
|
|
|
881 |
|
|
audio_dma_free(&chip->s[SNDRV_PCM_STREAM_PLAYBACK]);
|
882 |
|
|
audio_dma_free(&chip->s[SNDRV_PCM_STREAM_CAPTURE]);
|
883 |
|
|
}
|
884 |
|
|
|
885 |
|
|
static int __init sa11xx_uda1341_probe(struct platform_device *devptr)
|
886 |
|
|
{
|
887 |
|
|
int err;
|
888 |
|
|
struct snd_card *card;
|
889 |
|
|
struct sa11xx_uda1341 *chip;
|
890 |
|
|
|
891 |
|
|
/* register the soundcard */
|
892 |
|
|
card = snd_card_new(-1, id, THIS_MODULE, sizeof(struct sa11xx_uda1341));
|
893 |
|
|
if (card == NULL)
|
894 |
|
|
return -ENOMEM;
|
895 |
|
|
|
896 |
|
|
chip = card->private_data;
|
897 |
|
|
spin_lock_init(&chip->s[0].dma_lock);
|
898 |
|
|
spin_lock_init(&chip->s[1].dma_lock);
|
899 |
|
|
|
900 |
|
|
card->private_free = snd_sa11xx_uda1341_free;
|
901 |
|
|
chip->card = card;
|
902 |
|
|
chip->samplerate = AUDIO_RATE_DEFAULT;
|
903 |
|
|
|
904 |
|
|
// mixer
|
905 |
|
|
if ((err = snd_chip_uda1341_mixer_new(card, &chip->uda1341)))
|
906 |
|
|
goto nodev;
|
907 |
|
|
|
908 |
|
|
// PCM
|
909 |
|
|
if ((err = snd_card_sa11xx_uda1341_pcm(chip, 0)) < 0)
|
910 |
|
|
goto nodev;
|
911 |
|
|
|
912 |
|
|
strcpy(card->driver, "UDA1341");
|
913 |
|
|
strcpy(card->shortname, "H3600 UDA1341TS");
|
914 |
|
|
sprintf(card->longname, "Compaq iPAQ H3600 with Philips UDA1341TS");
|
915 |
|
|
|
916 |
|
|
snd_card_set_dev(card, &devptr->dev);
|
917 |
|
|
|
918 |
|
|
if ((err = snd_card_register(card)) == 0) {
|
919 |
|
|
printk( KERN_INFO "iPAQ audio support initialized\n" );
|
920 |
|
|
platform_set_drvdata(devptr, card);
|
921 |
|
|
return 0;
|
922 |
|
|
}
|
923 |
|
|
|
924 |
|
|
nodev:
|
925 |
|
|
snd_card_free(card);
|
926 |
|
|
return err;
|
927 |
|
|
}
|
928 |
|
|
|
929 |
|
|
static int __devexit sa11xx_uda1341_remove(struct platform_device *devptr)
|
930 |
|
|
{
|
931 |
|
|
snd_card_free(platform_get_drvdata(devptr));
|
932 |
|
|
platform_set_drvdata(devptr, NULL);
|
933 |
|
|
return 0;
|
934 |
|
|
}
|
935 |
|
|
|
936 |
|
|
#define SA11XX_UDA1341_DRIVER "sa11xx_uda1341"
|
937 |
|
|
|
938 |
|
|
static struct platform_driver sa11xx_uda1341_driver = {
|
939 |
|
|
.probe = sa11xx_uda1341_probe,
|
940 |
|
|
.remove = __devexit_p(sa11xx_uda1341_remove),
|
941 |
|
|
#ifdef CONFIG_PM
|
942 |
|
|
.suspend = snd_sa11xx_uda1341_suspend,
|
943 |
|
|
.resume = snd_sa11xx_uda1341_resume,
|
944 |
|
|
#endif
|
945 |
|
|
.driver = {
|
946 |
|
|
.name = SA11XX_UDA1341_DRIVER,
|
947 |
|
|
},
|
948 |
|
|
};
|
949 |
|
|
|
950 |
|
|
static int __init sa11xx_uda1341_init(void)
|
951 |
|
|
{
|
952 |
|
|
int err;
|
953 |
|
|
|
954 |
|
|
if (!machine_is_h3xxx())
|
955 |
|
|
return -ENODEV;
|
956 |
|
|
if ((err = platform_driver_register(&sa11xx_uda1341_driver)) < 0)
|
957 |
|
|
return err;
|
958 |
|
|
device = platform_device_register_simple(SA11XX_UDA1341_DRIVER, -1, NULL, 0);
|
959 |
|
|
if (!IS_ERR(device)) {
|
960 |
|
|
if (platform_get_drvdata(device))
|
961 |
|
|
return 0;
|
962 |
|
|
platform_device_unregister(device);
|
963 |
|
|
err = -ENODEV;
|
964 |
|
|
} else
|
965 |
|
|
err = PTR_ERR(device);
|
966 |
|
|
platform_driver_unregister(&sa11xx_uda1341_driver);
|
967 |
|
|
return err;
|
968 |
|
|
}
|
969 |
|
|
|
970 |
|
|
static void __exit sa11xx_uda1341_exit(void)
|
971 |
|
|
{
|
972 |
|
|
platform_device_unregister(device);
|
973 |
|
|
platform_driver_unregister(&sa11xx_uda1341_driver);
|
974 |
|
|
}
|
975 |
|
|
|
976 |
|
|
module_init(sa11xx_uda1341_init);
|
977 |
|
|
module_exit(sa11xx_uda1341_exit);
|
978 |
|
|
|
979 |
|
|
/* }}} */
|
980 |
|
|
|
981 |
|
|
/*
|
982 |
|
|
* Local variables:
|
983 |
|
|
* indent-tabs-mode: t
|
984 |
|
|
* End:
|
985 |
|
|
*/
|