Subversion Repositories or1k_soc_on_altera_embedded_dev_kit

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  OR1K test application for XESS XSV board, Top Level         ////

////                                                              ////

////  This file is part of the OR1K test application              ////

////  http://www.opencores.org/cores/or1k/                        ////

////                                                              ////

////  Description                                                 ////

////  Top level instantiating all the blocks.                     ////

////                                                              ////

////  To Do:                                                      ////

////   - nothing really                                           ////

////                                                              ////

////  Author(s):                                                  ////

////      - Damjan Lampret, lampret@opencores.org                 ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2001 Authors                                   ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

// CVS Revision History

//

// $Log: xsv_fpga_top.v,v $

// Revision 1.5  2010-01-16 02:15:22  Nathan

// Updated to match changes in hardware.  Added support for hi-speed mode.

//

// Revision 1.4  2010-01-08 01:41:07  Nathan

// Removed unused, non-existant include from CPU behavioral model.  Minor text edits.

//

// Revision 1.3  2008/07/11 08:22:17  Nathan

// Added code to make the native TAP simulate a Xilinx BSCAN device, and code to simulate the behavior of the xilinx_internal_jtag module.  The adv_dbg_module should get inputs that emulate the xilinx_internal_jtag device outputs.

//

// Revision 1.10  2004/04/05 08:44:35  lampret

// Merged branch_qmem into main tree.

//

// Revision 1.8  2003/04/07 21:05:58  lampret

// WB = 1/2 RISC clock test code enabled.

//

// Revision 1.7  2003/04/07 01:28:17  lampret

// Adding OR1200_CLMODE_1TO2 test code.

//

// Revision 1.6  2002/08/12 05:35:12  lampret

// rty_i are unused - tied to zero.

//

// Revision 1.5  2002/03/29 20:58:51  lampret

// Changed hardcoded address for fake MC to use a define.

//

// Revision 1.4  2002/03/29 16:30:47  lampret

// Fixed port names that changed.

//

// Revision 1.3  2002/03/29 15:50:03  lampret

// Added response from memory controller (addr 0x60000000)

//

// Revision 1.2  2002/03/21 17:39:16  lampret

// Fixed some typos

//

//

`include "xsv_fpga_defines.v"

//`include "bench_defines.v"

module xsv_fpga_top (

        //

        // Global signals

        //

        //clk,

        //rstn,

        // UART signals

        uart_stx, uart_srx

        // SDRAM signals

        /*

        sdram_clk_i, sdram_addr_o, sdram_ba_o, sdram_dqm_o,

        sdram_we_o, sdram_cas_o, sdram_ras_o,

        sdram_cke_o, sdram_cs_o, sdram_data_io

        */

);

//

// I/O Ports

//

//

// Global

//

//input                 clk;

//input                 rstn;

// UART

input uart_srx;

output uart_stx;

// SDRAM

/*

input sdram_clk_i;

output [11:0] sdram_addr_o;

output [1:0] sdram_ba_o;

output [3:0] sdram_dqm_o;

output sdram_we_o;

output sdram_cas_o;

output sdram_ras_o;

output sdram_cke_o;

output sdram_cs_o;

inout [31:0] sdram_data_io;

*/

//

// Internal wires

//

wire clk;

wire rstn;

//

// Debug core master i/f wires

//

wire    [31:0]           wb_dm_adr_o;

wire    [31:0]           wb_dm_dat_i;

wire    [31:0]           wb_dm_dat_o;

wire    [3:0]            wb_dm_sel_o;

wire                    wb_dm_we_o;

wire                    wb_dm_stb_o;

wire                    wb_dm_cyc_o;

wire                    wb_dm_cab_o;

wire                    wb_dm_ack_i;

wire                    wb_dm_err_i;

//

// Debug <-> RISC wires

//

wire    [3:0]            dbg_lss;

wire    [1:0]            dbg_is;

wire    [10:0]   dbg_wp;

wire                    dbg_bp;

wire    [31:0]   dbg_dat_dbg;

wire    [31:0]   dbg_dat_risc;

wire    [31:0]   dbg_adr;

wire                    dbg_ewt;

wire                    dbg_stall;

wire                    dbg_we;

wire                    dbg_stb;

wire                    dbg_ack;

wire     dbg_cpu0_rst;

//

// TAP<->dbg_interface

//      

wire debug_rst;

wire debug_select;

wire debug_tdi;

wire debug_tdo;

wire shift_dr;

wire pause_dr;

wire update_dr;

wire capture_dr;

wire drck;  // To emulate the BSCAN_VIRTEX/SPARTAN devices

//

// RISC instruction master i/f wires

//

wire    [31:0]           wb_rim_adr_o;

wire                    wb_rim_cyc_o;

wire    [31:0]           wb_rim_dat_i;

wire    [31:0]           wb_rim_dat_o;

wire    [3:0]            wb_rim_sel_o;

wire                    wb_rim_ack_i;

wire                    wb_rim_err_i;

wire                    wb_rim_rty_i = 1'b0;

wire                    wb_rim_we_o;

wire                    wb_rim_stb_o;

wire                    wb_rim_cab_o;

//wire  [31:0]          wb_rif_adr;

//reg                   prefix_flash;

//

// RISC data master i/f wires

//

wire    [31:0]           wb_rdm_adr_o;

wire                    wb_rdm_cyc_o;

wire    [31:0]           wb_rdm_dat_i;

wire    [31:0]           wb_rdm_dat_o;

wire    [3:0]            wb_rdm_sel_o;

wire                    wb_rdm_ack_i;

wire                    wb_rdm_err_i;

wire                    wb_rdm_rty_i = 1'b0;

wire                    wb_rdm_we_o;

wire                    wb_rdm_stb_o;

wire                    wb_rdm_cab_o;

//

// RISC misc

//

//wire  [19:0]          pic_ints;

//

// SRAM controller slave i/f wires

//

wire    [31:0]           wb_ss_dat_i;

wire    [31:0]           wb_ss_dat_o;

wire    [31:0]           wb_ss_adr_i;

wire    [3:0]            wb_ss_sel_i;

wire                    wb_ss_we_i;

wire                    wb_ss_cyc_i;

wire                    wb_ss_stb_i;

wire                    wb_ss_ack_o;

wire                    wb_ss_err_o;

//

// UART16550 core slave i/f wires

//

wire    [31:0]           wb_us_dat_i;

wire    [31:0]           wb_us_dat_o;

wire    [31:0]           wb_us_adr_i;

wire    [3:0]            wb_us_sel_i;

wire                    wb_us_we_i;

wire                    wb_us_cyc_i;

wire                    wb_us_stb_i;

wire                    wb_us_ack_o;

wire                    wb_us_err_o;

//

// UART external i/f wires

//

wire                    uart_stx;

wire                    uart_srx;

//

// Memory controller core slave i/f wires

//

/*

wire    [31:0]          wb_mem_dat_i;

wire    [31:0]          wb_mem_dat_o;

wire    [31:0]          wb_mem_adr_i;

wire    [3:0]           wb_mem_sel_i;

wire                    wb_mem_we_i;

wire                    wb_mem_cyc_i;

wire                    wb_mem_stb_i;

wire                    wb_mem_ack_o;

wire                    wb_mem_err_o;

// Internal mem control wires

wire [7:0] mc_cs;

wire [12:0] mc_addr_o;

// Memory control external wires

wire sdram_clk_i;

wire [11:0] sdram_addr_o;

wire [1:0] sdram_ba_o;

wire [3:0] sdram_dqm_o;

wire sdram_we_o;

wire sdram_cas_o;

wire sdram_ras_o;

wire sdram_cke_o;

wire sdram_cs_o;

wire [31:0] sdram_data_io;

*/

//

// JTAG wires

//

wire                    jtag_tdi;

wire                    jtag_tms;

wire                    jtag_tck;

wire                    jtag_trst;

wire                    jtag_tdo;

//

// Reset debounce

//

reg      rstn_debounce;

wire     rst_r;

reg      wb_rst;

reg      cpu_rst;

//

// Global clock

//

`ifdef OR1200_CLMODE_1TO2

reg                     wb_clk;

`else

wire                    wb_clk;

`endif

//

// Reset debounce

//

always @(posedge wb_clk or negedge rstn)

        if (~rstn)

                rstn_debounce <= 1'b0;

        else

                rstn_debounce <= #1 1'b1;

assign rst_r = ~rstn_debounce;

//assign dbg_trst = rstn_debounce & jtag_trst;

//

// Reset debounce

//

always @(posedge wb_clk)

        wb_rst <= #1 rst_r;

always @ (posedge wb_clk)

        cpu_rst <= dbg_cpu0_rst | rst_r;

//

// This is purely for testing 1/2 WB clock

// This should never be used when implementing in

// an FPGA. It is used only for simulation regressions.

//

`ifdef OR1200_CLMODE_1TO2

initial wb_clk = 0;

always @(posedge clk)

        wb_clk = ~wb_clk;

`else

//

// Some Xilinx P&R tools need this

//

`ifdef TARGET_VIRTEX

IBUFG IBUFG1 (

        .O      ( wb_clk ),

        .I      ( clk )

);

`else

assign wb_clk = clk;

`endif

`endif // OR1200_CLMODE_1TO2

//

// Unused WISHBONE signals

//

assign wb_us_err_o = 1'b0;

assign jtag_tvref = 1'b1;

assign jtag_tgnd = 1'b0;

// JTAG / adv. debug control testbench

adv_debug_tb tb (

.jtag_tck_o(jtag_tck),

.jtag_tms_o(jtag_tms),

.jtag_tdo_o(jtag_tdi),

.jtag_tdi_i(jtag_tdo),

.wb_clk_o(clk),

.sys_rstn_o(rstn)

);

//

// JTAG TAP controller instantiation

//

tap_top tap (

                // JTAG pads

                .tms_pad_i(jtag_tms),

                .tck_pad_i(jtag_tck),

                .trstn_pad_i(1'b1),

                .tdi_pad_i(jtag_tdi),

                .tdo_pad_o(jtag_tdo),

                .tdo_padoe_o(),

                // TAP states

                                   .test_logic_reset_o(debug_rst),

                                   .run_test_idle_o(),

                .shift_dr_o(shift_dr),

                .pause_dr_o(),

                .update_dr_o(update_dr),

                .capture_dr_o(capture_dr),

                // Select signals for boundary scan or mbist

                .extest_select_o(),

                .sample_preload_select_o(),

                .mbist_select_o(),

                .debug_select_o(debug_select),

                // TDO signal that is connected to TDI of sub-modules.

                .tdi_o(debug_tdi),

                // TDI signals from sub-modules

                .debug_tdo_i(debug_tdo),    // from debug module

                .bs_chain_tdo_i(1'b0), // from Boundary Scan Chain

                .mbist_tdo_i(1'b0)     // from Mbist Chain

              );

// This is taken from the xilinx bscan_virtex4.v module

// It simulates the DRCK output of a BSCAN_* block

assign drck = ((debug_select & !shift_dr & !capture_dr) ||

               (debug_select & shift_dr & jtag_tck) ||

               (debug_select & capture_dr & jtag_tck));

reg xshift;

reg xcapture;

reg xupdate;

reg xselect;

// TAP state outputs are also delayed half a cycle.

always @(negedge jtag_tck)

begin

   xshift = shift_dr;

   xcapture = capture_dr;

   xupdate = update_dr;

   xselect = debug_select;

end

//////////////////////////////////////////               

wire tck2;

assign tck2 = (drck & !xupdate);

reg update2;

always @ (posedge xupdate or posedge xcapture or negedge xselect)

begin

   if(xupdate) update2 <= 1'b1;

   else if(xcapture) update2 <= 1'b0;

   else if(!xselect) update2 <= 1'b0;

end

//

// Instantiation of the development i/f

//

adbg_top dbg_top  (

        // JTAG pins

        .tck_i  ( tck2 ),

        .tdi_i  ( debug_tdi ),

        .tdo_o  ( debug_tdo ),

        .rst_i  ( debug_rst ),

     // TAP states

     .shift_dr_i( xshift ),

     .pause_dr_i( pause_dr ),

     .update_dr_i( update2 ),

     .capture_dr_i (xcapture),

     // Instructions

     .debug_select_i( xselect ),

        // RISC signals

        .cpu0_clk_i             ( wb_clk ),

        .cpu0_addr_o    ( dbg_adr ),

        .cpu0_data_i    ( dbg_dat_risc ),

        .cpu0_data_o    ( dbg_dat_dbg ),

        .cpu0_bp_i              ( dbg_bp ),

        .cpu0_stall_o   ( dbg_stall ),

        .cpu0_stb_o     ( dbg_stb ),

        .cpu0_we_o              ( dbg_we ),

        .cpu0_ack_i     ( dbg_ack ),

        .cpu0_rst_o             ( dbg_cpu0_rst),

        // WISHBONE common

        .wb_clk_i       ( wb_clk ),

        // WISHBONE master interface

        .wb_adr_o       ( wb_dm_adr_o ),

        .wb_dat_o       ( wb_dm_dat_o ),

        .wb_dat_i       ( wb_dm_dat_i ),

        .wb_cyc_o       ( wb_dm_cyc_o ),

        .wb_stb_o       ( wb_dm_stb_o ),

        .wb_sel_o       ( wb_dm_sel_o ),

        .wb_we_o        ( wb_dm_we_o  ),

        .wb_ack_i       ( wb_dm_ack_i ),

        .wb_cab_o       ( wb_dm_cab_o ),

        .wb_err_i       ( wb_dm_err_i ),

        .wb_cti_o   (),

        .wb_bte_o   ()

);

//

// Instantiation of the OR1200 RISC

//

or1200_top or1200_top (

        // Common

        .rst_i          ( cpu_rst ),

        .clk_i          ( clk ),

`ifdef OR1200_CLMODE_1TO2

        .clmode_i       ( 2'b01 ),

`else

`ifdef OR1200_CLMODE_1TO4

        .clmode_i       ( 2'b11 ),

`else

        .clmode_i       ( 2'b00 ),

`endif

`endif

        // WISHBONE Instruction Master

        .iwb_clk_i      ( wb_clk ),

        .iwb_rst_i      ( wb_rst ),

        .iwb_cyc_o      ( wb_rim_cyc_o ),

        .iwb_adr_o      ( wb_rim_adr_o ),

        .iwb_dat_i      ( wb_rim_dat_i ),

        .iwb_dat_o      ( wb_rim_dat_o ),

        .iwb_sel_o      ( wb_rim_sel_o ),

        .iwb_ack_i      ( wb_rim_ack_i ),

        .iwb_err_i      ( wb_rim_err_i ),

        .iwb_rty_i      ( wb_rim_rty_i ),

        .iwb_we_o       ( wb_rim_we_o  ),

        .iwb_stb_o      ( wb_rim_stb_o ),

        .iwb_cab_o      ( wb_rim_cab_o ),

        // WISHBONE Data Master

        .dwb_clk_i      ( wb_clk ),

        .dwb_rst_i      ( wb_rst ),

        .dwb_cyc_o      ( wb_rdm_cyc_o ),

        .dwb_adr_o      ( wb_rdm_adr_o ),

        .dwb_dat_i      ( wb_rdm_dat_i ),

        .dwb_dat_o      ( wb_rdm_dat_o ),

        .dwb_sel_o      ( wb_rdm_sel_o ),

        .dwb_ack_i      ( wb_rdm_ack_i ),

        .dwb_err_i      ( wb_rdm_err_i ),

        .dwb_rty_i      ( wb_rdm_rty_i ),

        .dwb_we_o       ( wb_rdm_we_o  ),

        .dwb_stb_o      ( wb_rdm_stb_o ),

        .dwb_cab_o      ( wb_rdm_cab_o ),

        // Debug

        .dbg_stall_i    ( dbg_stall ),  // Set to 1'b0 if debug is absent / broken

        .dbg_dat_i      ( dbg_dat_dbg ),

        .dbg_adr_i      ( dbg_adr ),

        .dbg_ewt_i      ( 1'b0 ),

        .dbg_lss_o      ( ),

        .dbg_is_o       ( ),

        .dbg_wp_o       ( ),

        .dbg_bp_o       ( dbg_bp ),

        .dbg_dat_o      ( dbg_dat_risc ),

        .dbg_ack_o      ( dbg_ack ),

        .dbg_stb_i      ( dbg_stb ),

        .dbg_we_i       ( dbg_we ),

        // Power Management

        .pm_clksd_o     ( ),

        .pm_cpustall_i  ( 1'b0 ),

        .pm_dc_gate_o   ( ),

        .pm_ic_gate_o   ( ),

        .pm_dmmu_gate_o ( ),

        .pm_immu_gate_o ( ),

        .pm_tt_gate_o   ( ),

        .pm_cpu_gate_o  ( ),

        .pm_wakeup_o    ( ),

        .pm_lvolt_o     ( ),

        // Interrupts

        .pic_ints_i     (20'b0)

);

//

// Instantiation of the On-chip RAM controller

//

onchip_ram_top  #(

        .dwidth  (32),

        .size_bytes(16384)

        ) onchip_ram_top (

        // WISHBONE common

        .wb_clk_i       ( wb_clk ),

        .wb_rst_i       ( wb_rst ),

        // WISHBONE slave

        .wb_dat_i       ( wb_ss_dat_i ),

        .wb_dat_o       ( wb_ss_dat_o ),

        .wb_adr_i       ( wb_ss_adr_i ),

        .wb_sel_i       ( wb_ss_sel_i ),

        .wb_we_i        ( wb_ss_we_i  ),

        .wb_cyc_i       ( wb_ss_cyc_i ),

        .wb_stb_i       ( wb_ss_stb_i ),

        .wb_ack_o       ( wb_ss_ack_o ),

        .wb_err_o       ( wb_ss_err_o )

);

//

// Instantiation of the UART16550

//

uart_top uart_top (

        // WISHBONE common

        .wb_clk_i       ( wb_clk ),

        .wb_rst_i       ( wb_rst ),

        // WISHBONE slave

        .wb_adr_i       ( wb_us_adr_i[4:0] ),

        .wb_dat_i       ( wb_us_dat_i ),

        .wb_dat_o       ( wb_us_dat_o ),

        .wb_we_i        ( wb_us_we_i  ),

        .wb_stb_i       ( wb_us_stb_i ),

        .wb_cyc_i       ( wb_us_cyc_i ),

        .wb_ack_o       ( wb_us_ack_o ),

        .wb_sel_i       ( wb_us_sel_i ),

        // Interrupt request

        .int_o          ( ),

        // UART signals

        // serial input/output

        .stx_pad_o      ( uart_stx ),

        .srx_pad_i      ( uart_srx ),

        // modem signals

        .rts_pad_o      ( ),

        .cts_pad_i      ( 1'b0 ),

        .dtr_pad_o      ( ),

        .dsr_pad_i      ( 1'b0 ),

        .ri_pad_i       ( 1'b0 ),

        .dcd_pad_i      ( 1'b0 )

);

/*

mc_wrapper mc_wrapper (

        .clk_i ( wb_clk ),

        .rst_i ( wb_rst ),

        .clk_mem_i ( sdram_clk_i ),

        .wb_data_i ( wb_mem_dat_i ),

        .wb_data_o ( wb_mem_dat_o ),

        .wb_addr_i ( wb_mem_adr_i ),

        .wb_sel_i ( wb_mem_sel_i ),

        .wb_we_i ( wb_mem_we_i ),

        .wb_cyc_i ( wb_mem_cyc_i ),

        .wb_stb_i ( wb_mem_stb_i ),

        .wb_ack_o ( wb_mem_ack_o ),

        .wb_err_o ( wb_mem_err_o ),

        .susp_req_i ( 1'b0 ),

        .resume_req_i ( 1'b0 ),

        .suspended_o (),

        .poc_o ( ),  // This is an output so the rest of the system can configure itself

        .sdram_addr_o ( mc_addr_o ),

        .sdram_ba_o ( sdram_ba_o ),

        .sdram_cas_n_o ( sdram_cas_o ),

        .sdram_ras_n_o ( sdram_ras_o ),

        .sdram_cke_n_o ( sdram_cke_o ),

        .mc_dqm_o ( sdram_dqm_o  ),

        .mc_we_n_o ( sdram_we_o ),

        .mc_oe_n_o ( ),

        .mc_data_io ( sdram_data_io ),

        .mc_parity_io ( ),

        .mc_cs_n_o ( mc_cs )

        );

assign sdram_cs_o = mc_cs[0];

assign sdram_addr_o = mc_addr_o[11:0];

*/

//

// Instantiation of the Traffic COP

//

wb_conbus_top #(.s0_addr_w  (`APP_ADDR_DEC_W),

         .s0_addr    (`APP_ADDR_SDRAM),

         .s1_addr_w  (`APP_ADDR_DEC2_W),

         .s1_addr    (`APP_ADDR_OCRAM),

         .s27_addr_w (`APP_ADDR_DECP_W),

         .s2_addr    (`APP_ADDR_VGA),

         .s3_addr    (`APP_ADDR_ETH),

         .s4_addr    (`APP_ADDR_AUDIO),

         .s5_addr    (`APP_ADDR_UART),

         .s6_addr    (`APP_ADDR_PS2),

         .s7_addr    (`APP_ADDR_RES1)

        ) tc_top (

        // WISHBONE common

        .clk_i  ( wb_clk ),

        .rst_i  ( wb_rst ),

        // WISHBONE Initiator 0

        .m0_cyc_i       ( 1'b0 ),

        .m0_stb_i       ( 1'b0 ),

        .m0_cab_i       ( 1'b0 ),

        .m0_adr_i       ( 32'h0000_0000 ),

        .m0_sel_i       ( 4'b0000 ),

        .m0_we_i        ( 1'b0 ),

        .m0_dat_i       ( 32'h0000_0000 ),

        .m0_dat_o       ( ),

        .m0_ack_o       ( ),

        .m0_err_o       ( ),

        // WISHBONE Initiator 1

        .m1_cyc_i       ( 1'b0 ),

        .m1_stb_i       ( 1'b0 ),

        .m1_cab_i       ( 1'b0 ),

        .m1_adr_i       ( 32'h0000_0000 ),

        .m1_sel_i       ( 4'b0000 ),

        .m1_we_i        ( 1'b0 ),

        .m1_dat_i       ( 32'h0000_0000 ),

        .m1_dat_o       ( ),

        .m1_ack_o       ( ),

        .m1_err_o       ( ),

        // WISHBONE Initiator 2

        .m2_cyc_i       ( 1'b0 ),

        .m2_stb_i       ( 1'b0 ),

        .m2_cab_i       ( 1'b0 ),

        .m2_adr_i       ( 32'h0000_0000 ),

        .m2_sel_i       ( 4'b0000 ),

        .m2_we_i        ( 1'b0 ),

        .m2_dat_i       ( 32'h0000_0000 ),

        .m2_dat_o       ( ),

        .m2_ack_o       ( ),

        .m2_err_o       ( ),

        // WISHBONE Initiator 3

        .m3_cyc_i       ( wb_dm_cyc_o ),

        .m3_stb_i       ( wb_dm_stb_o ),

        .m3_cab_i       ( wb_dm_cab_o ),

        .m3_adr_i       ( wb_dm_adr_o ),

        .m3_sel_i       ( wb_dm_sel_o ),