Subversion Repositories or1k_soc_on_altera_embedded_dev_kit

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// ctrlStsRegBI.v                                               ////

////                                                              ////

//// This file is part of the spiMaster opencores effort.

//// <http://www.opencores.org/cores//>                           ////

////                                                              ////

//// Module Description:                                          ////

//// Wishbone bus interface to spiMaster control and status regs

////                                                              ////

//// To Do:                                                       ////

//// 

////                                                              ////

//// Author(s):                                                   ////

//// - Steve Fielding, sfielding@base2designs.com                 ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2008 Steve Fielding and OPENCORES.ORG          ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE. See the GNU Lesser General Public License for more  ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from <http://www.opencores.org/lgpl.shtml>                   ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

`include "timescale.v"

`include "spiMaster_defines.v"

module ctrlStsRegBI (

  busClk,

  rstFromWire,

  dataIn,

  dataOut,

  address,

  writeEn,

  strobe_i,

  spiSysClk,

  spiTransType,

  spiTransCtrl,

  spiTransStatus,

  spiDirectAccessTxData,

  spiDirectAccessRxData,

  ctrlStsRegSel,

  rstSyncToBusClkOut,

  rstSyncToSpiClkOut,

  SDWriteError,

  SDReadError,

  SDInitError,

  SDAddr,

  spiClkDelay

);

input [7:0] dataIn;

input [7:0] address;

input writeEn;

input strobe_i;

input busClk;

input spiSysClk;

output [7:0] dataOut;

input ctrlStsRegSel;

output [1:0] spiTransType;

output spiTransCtrl;

input spiTransStatus;

output [7:0] spiDirectAccessTxData;

reg [7:0] spiDirectAccessTxData;

input [7:0] spiDirectAccessRxData;

input rstFromWire;

output rstSyncToBusClkOut;

output rstSyncToSpiClkOut;

input [1:0] SDWriteError;

input [1:0] SDReadError;

input [1:0] SDInitError;

output [31:0] SDAddr;

reg [31:0] SDAddr;

output [7:0] spiClkDelay;

reg [7:0] spiClkDelay;

wire [7:0] dataIn;

wire [7:0] address;

wire writeEn;

wire strobe_i;

wire clk;

reg [7:0] dataOut;

reg [1:0] spiTransType;

reg spiTransCtrl;

wire ctrlStsRegSel;

wire rstFromWire;

reg rstSyncToBusClkOut;

reg rstSyncToSpiClkOut;

//internal wire and regs

reg [5:0] rstShift;

reg rstFromBus;

reg [7:0] spiDirectAccessTxDataSTB;

reg [7:0] spiDirectAccessRxDataSTB;

reg [1:0] spiTransTypeSTB;

reg spiTransCtrlSTB;

reg spiTransStatusSTB;

reg rstSyncToSpiClkFirst;

reg [5:0] spiTransCtrlShift;

reg spiTransStatusReg1;

reg spiTransStatusReg2;

reg spiTransStatusReg3;

reg [1:0] SDWriteErrorSTB;

reg [1:0] SDReadErrorSTB;

reg [1:0] SDInitErrorSTB;

reg spiTransCtrl_reg1;

reg spiTransCtrl_reg2;

reg spiTransCtrl_reg3;

//sync write demux

always @(posedge busClk)

begin

  if (rstSyncToBusClkOut == 1'b1) begin

    spiTransTypeSTB <= `DIRECT_ACCESS;

    spiTransCtrlSTB <= `TRANS_STOP;

    spiDirectAccessTxDataSTB <= 8'h00;

    spiClkDelay <= `FAST_SPI_CLK;

  end

  else begin

    if (writeEn == 1'b1 && ctrlStsRegSel == 1'b1 && strobe_i == 1'b1 && address == `SPI_MASTER_CONTROL_REG && dataIn[0] == 1'b1 )

      rstFromBus <= 1'b1;

    else

      rstFromBus <= 1'b0;

    if (writeEn == 1'b1 && ctrlStsRegSel == 1'b1 && strobe_i == 1'b1 && address == `TRANS_CTRL_REG && dataIn[0] == 1'b1 )

      spiTransCtrlSTB <= 1'b1;

    else

      spiTransCtrlSTB <= 1'b0;

    if (writeEn == 1'b1 && ctrlStsRegSel == 1'b1 && strobe_i == 1'b1) begin

      case (address)

        `TRANS_TYPE_REG: spiTransTypeSTB <= dataIn[1:0];

        `SD_ADDR_7_0_REG: SDAddr[7:0] <= dataIn;

        `SD_ADDR_15_8_REG: SDAddr[15:8] <= dataIn;

        `SD_ADDR_23_16_REG: SDAddr[23:16] <= dataIn;

        `SD_ADDR_31_24_REG: SDAddr[31:24] <= dataIn;

        `SPI_CLK_DEL_REG: spiClkDelay <= dataIn;

        `DIRECT_ACCESS_DATA_REG: spiDirectAccessTxDataSTB <= dataIn;

      endcase

    end

  end

end

// async read mux

always @(address or spiTransTypeSTB or spiTransCtrlSTB or

         spiTransStatusSTB or spiDirectAccessRxDataSTB or

         SDAddr or SDInitErrorSTB or SDReadErrorSTB or SDWriteErrorSTB or

         spiClkDelay)

begin

  case (address)

    `SPI_MASTER_VERSION_REG: dataOut <= `SPI_MASTER_VERSION_NUM;

    `TRANS_TYPE_REG: dataOut <= { 6'b000000, spiTransTypeSTB};

    `TRANS_CTRL_REG: dataOut <= { 7'b0000000, spiTransCtrlSTB};

    `TRANS_STS_REG: dataOut <= { 7'b0000000, spiTransStatusSTB};

    `TRANS_ERROR_REG: dataOut <= {2'b00, SDWriteErrorSTB, SDReadErrorSTB, SDInitErrorSTB};

    `SD_ADDR_7_0_REG: dataOut <= SDAddr[7:0];

    `SD_ADDR_15_8_REG: dataOut <= SDAddr[15:8];

    `SD_ADDR_23_16_REG: dataOut <= SDAddr[23:16];

    `SD_ADDR_31_24_REG: dataOut <= SDAddr[31:24];

    `SPI_CLK_DEL_REG: dataOut <= spiClkDelay;

    `DIRECT_ACCESS_DATA_REG: dataOut <= spiDirectAccessRxDataSTB;

    default: dataOut <= 8'h00;

  endcase

end

// reset control

//generate 'rstSyncToBusClk'

//assuming that 'busClk' < 5 * 'spiSysClk'.

always @(posedge busClk) begin

  if (rstFromWire == 1'b1 || rstFromBus == 1'b1)

    rstShift <= 6'b111111;

  else

    rstShift <= {1'b0, rstShift[5:1]};

end

always @(rstShift)

  rstSyncToBusClkOut <= rstShift[0];

// double sync across clock domains to generate 'rstSyncToSpiClkOut'

always @(posedge spiSysClk) begin

    rstSyncToSpiClkFirst <= rstSyncToBusClkOut;

    rstSyncToSpiClkOut <= rstSyncToSpiClkFirst;

end

// spi transaction control

//assuming that 'busClk' < 5 * 'spiSysClk'.

always @(posedge busClk) begin

  if (rstSyncToBusClkOut == 1'b1)

    spiTransCtrlShift <= 6'b000000;

  else if (spiTransCtrlSTB == 1'b1)

    spiTransCtrlShift <= 6'b111111;

  else

    spiTransCtrlShift <= {1'b0, spiTransCtrlShift[5:1]};

end

//re-sync to spiSysClk

always @(posedge spiSysClk) begin

  if (rstSyncToSpiClkOut == 1'b1) begin

    spiTransCtrl_reg1 <= 1'b0;

    spiTransCtrl_reg2 <= 1'b0;

    spiTransCtrl_reg3 <= 1'b0;

  end

  else begin

    spiTransCtrl_reg1 <= spiTransCtrlShift[0];

    spiTransCtrl_reg2 <= spiTransCtrl_reg1;

    spiTransCtrl_reg3 <= spiTransCtrl_reg2;

    if (spiTransCtrl_reg3 == 1'b0 && spiTransCtrl_reg2 == 1'b1)

      spiTransCtrl <= `TRANS_START;

    else

      spiTransCtrl <= `TRANS_STOP;

  end

end

//re-sync from busClk to spiSysClk. 

always @(posedge spiSysClk) begin

  if (rstSyncToSpiClkOut == 1'b1) begin

    spiTransType <= `DIRECT_ACCESS;

    spiDirectAccessTxData <= 8'h00;

  end

  else begin

    spiDirectAccessTxData <= spiDirectAccessTxDataSTB;

    spiTransType <= spiTransTypeSTB;

  end

end

//re-sync from spiSysClk to busClk

always @(posedge busClk) begin

  if (rstSyncToBusClkOut == 1'b1) begin

    spiTransStatusSTB <= `TRANS_NOT_BUSY;

    spiTransStatusReg1 <= `TRANS_NOT_BUSY;

    spiTransStatusReg2 <= `TRANS_NOT_BUSY;

    spiTransStatusReg3 <= `TRANS_NOT_BUSY;

  end

  else begin

    spiTransStatusReg1 <= spiTransStatus;

    spiTransStatusReg2 <= spiTransStatusReg1;

    spiTransStatusReg3 <= spiTransStatusReg2;

    if (spiTransCtrlSTB == `TRANS_START)

      spiTransStatusSTB <= `TRANS_BUSY;

    else if (spiTransStatusReg3 == `TRANS_BUSY && spiTransStatusReg2 == `TRANS_NOT_BUSY)

      spiTransStatusSTB <= `TRANS_NOT_BUSY;

  end

  spiDirectAccessRxDataSTB <= spiDirectAccessRxData;

  SDWriteErrorSTB <= SDWriteError;

  SDReadErrorSTB <= SDReadError;

  SDInitErrorSTB <= SDInitError;

end

endmodule