1 |
2 |
mihad |
//////////////////////////////////////////////////////////////////////
|
2 |
|
|
//// ////
|
3 |
|
|
//// File name "pciw_fifo_control.v" ////
|
4 |
|
|
//// ////
|
5 |
|
|
//// This file is part of the "PCI bridge" project ////
|
6 |
|
|
//// http://www.opencores.org/cores/pci/ ////
|
7 |
|
|
//// ////
|
8 |
|
|
//// Author(s): ////
|
9 |
|
|
//// - Miha Dolenc (mihad@opencores.org) ////
|
10 |
|
|
//// ////
|
11 |
|
|
//// All additional information is avaliable in the README ////
|
12 |
|
|
//// file. ////
|
13 |
|
|
//// ////
|
14 |
|
|
//// ////
|
15 |
|
|
//////////////////////////////////////////////////////////////////////
|
16 |
|
|
//// ////
|
17 |
|
|
//// Copyright (C) 2001 Miha Dolenc, mihad@opencores.org ////
|
18 |
|
|
//// ////
|
19 |
|
|
//// This source file may be used and distributed without ////
|
20 |
|
|
//// restriction provided that this copyright statement is not ////
|
21 |
|
|
//// removed from the file and that any derivative work contains ////
|
22 |
|
|
//// the original copyright notice and the associated disclaimer. ////
|
23 |
|
|
//// ////
|
24 |
|
|
//// This source file is free software; you can redistribute it ////
|
25 |
|
|
//// and/or modify it under the terms of the GNU Lesser General ////
|
26 |
|
|
//// Public License as published by the Free Software Foundation; ////
|
27 |
|
|
//// either version 2.1 of the License, or (at your option) any ////
|
28 |
|
|
//// later version. ////
|
29 |
|
|
//// ////
|
30 |
|
|
//// This source is distributed in the hope that it will be ////
|
31 |
|
|
//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
|
32 |
|
|
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
|
33 |
|
|
//// PURPOSE. See the GNU Lesser General Public License for more ////
|
34 |
|
|
//// details. ////
|
35 |
|
|
//// ////
|
36 |
|
|
//// You should have received a copy of the GNU Lesser General ////
|
37 |
|
|
//// Public License along with this source; if not, download it ////
|
38 |
|
|
//// from http://www.opencores.org/lgpl.shtml ////
|
39 |
|
|
//// ////
|
40 |
|
|
//////////////////////////////////////////////////////////////////////
|
41 |
|
|
//
|
42 |
|
|
// CVS Revision History
|
43 |
|
|
//
|
44 |
|
|
// $Log
|
45 |
|
|
//
|
46 |
|
|
|
47 |
|
|
/* FIFO_CONTROL module provides read/write address and status generation for
|
48 |
|
|
FIFOs implemented with standard dual port SRAM cells in ASIC or FPGA designs */
|
49 |
21 |
mihad |
`include "pci_constants.v"
|
50 |
|
|
// synopsys translate_off
|
51 |
6 |
mihad |
`include "timescale.v"
|
52 |
21 |
mihad |
// synopsys translate_on
|
53 |
6 |
mihad |
|
54 |
2 |
mihad |
module PCIW_FIFO_CONTROL
|
55 |
21 |
mihad |
(
|
56 |
|
|
rclock_in,
|
57 |
|
|
wclock_in,
|
58 |
|
|
renable_in,
|
59 |
|
|
wenable_in,
|
60 |
|
|
reset_in,
|
61 |
58 |
mihad |
// flush_in, // not used
|
62 |
21 |
mihad |
almost_full_out,
|
63 |
|
|
full_out,
|
64 |
|
|
almost_empty_out,
|
65 |
|
|
empty_out,
|
66 |
|
|
waddr_out,
|
67 |
|
|
raddr_out,
|
68 |
|
|
rallow_out,
|
69 |
2 |
mihad |
wallow_out,
|
70 |
|
|
two_left_out
|
71 |
|
|
);
|
72 |
|
|
|
73 |
|
|
parameter ADDR_LENGTH = 7 ;
|
74 |
|
|
|
75 |
|
|
// independent clock inputs - rclock_in = read clock, wclock_in = write clock
|
76 |
|
|
input rclock_in, wclock_in;
|
77 |
|
|
|
78 |
|
|
// enable inputs - read address changes on rising edge of rclock_in when reads are allowed
|
79 |
|
|
// write address changes on rising edge of wclock_in when writes are allowed
|
80 |
|
|
input renable_in, wenable_in;
|
81 |
|
|
|
82 |
|
|
// reset input
|
83 |
|
|
input reset_in;
|
84 |
|
|
|
85 |
|
|
// flush input
|
86 |
58 |
mihad |
//input flush_in ; // not used
|
87 |
2 |
mihad |
|
88 |
|
|
// almost full and empy status outputs
|
89 |
|
|
output almost_full_out, almost_empty_out;
|
90 |
|
|
|
91 |
|
|
// full and empty status outputs
|
92 |
|
|
output full_out, empty_out;
|
93 |
|
|
|
94 |
|
|
// read and write addresses outputs
|
95 |
|
|
output [(ADDR_LENGTH - 1):0] waddr_out, raddr_out;
|
96 |
|
|
|
97 |
|
|
// read and write allow outputs
|
98 |
|
|
output rallow_out, wallow_out ;
|
99 |
|
|
|
100 |
|
|
// two locations left output indicator
|
101 |
|
|
output two_left_out ;
|
102 |
|
|
|
103 |
|
|
// read address register
|
104 |
|
|
reg [(ADDR_LENGTH - 1):0] raddr ;
|
105 |
|
|
|
106 |
|
|
// write address register
|
107 |
|
|
reg [(ADDR_LENGTH - 1):0] waddr;
|
108 |
|
|
assign waddr_out = waddr ;
|
109 |
|
|
|
110 |
|
|
// grey code registers
|
111 |
|
|
// grey code pipeline for write address
|
112 |
|
|
reg [(ADDR_LENGTH - 1):0] wgrey_minus1 ; // current
|
113 |
|
|
reg [(ADDR_LENGTH - 1):0] wgrey_addr ; // current
|
114 |
|
|
reg [(ADDR_LENGTH - 1):0] wgrey_next ; // next
|
115 |
|
|
|
116 |
|
|
// next write gray address calculation - bitwise xor between address and shifted address
|
117 |
|
|
wire [(ADDR_LENGTH - 2):0] calc_wgrey_next = waddr[(ADDR_LENGTH - 1):1] ^ waddr[(ADDR_LENGTH - 2):0] ;
|
118 |
|
|
|
119 |
|
|
// grey code pipeline for read address
|
120 |
|
|
reg [(ADDR_LENGTH - 1):0] rgrey_minus3 ; // three before current
|
121 |
|
|
reg [(ADDR_LENGTH - 1):0] rgrey_minus2 ; // two before current
|
122 |
|
|
reg [(ADDR_LENGTH - 1):0] rgrey_minus1 ; // one before current
|
123 |
|
|
reg [(ADDR_LENGTH - 1):0] rgrey_addr ; // current
|
124 |
|
|
reg [(ADDR_LENGTH - 1):0] rgrey_next ; // next
|
125 |
|
|
|
126 |
|
|
// next read gray address calculation - bitwise xor between address and shifted address
|
127 |
|
|
wire [(ADDR_LENGTH - 2):0] calc_rgrey_next = raddr[(ADDR_LENGTH - 1):1] ^ raddr[(ADDR_LENGTH - 2):0] ;
|
128 |
|
|
|
129 |
|
|
// FFs for registered empty and full flags
|
130 |
|
|
reg empty ;
|
131 |
|
|
reg full ;
|
132 |
|
|
|
133 |
|
|
// registered almost_empty and almost_full flags
|
134 |
|
|
reg almost_empty ;
|
135 |
|
|
reg almost_full ;
|
136 |
|
|
|
137 |
|
|
// write allow wire - writes are allowed when fifo is not full
|
138 |
|
|
wire wallow = wenable_in && ~full ;
|
139 |
|
|
|
140 |
|
|
// write allow output assignment
|
141 |
|
|
assign wallow_out = wallow ;
|
142 |
|
|
|
143 |
|
|
// read allow wire
|
144 |
|
|
wire rallow ;
|
145 |
|
|
|
146 |
|
|
// full output assignment
|
147 |
|
|
assign full_out = full ;
|
148 |
|
|
|
149 |
|
|
// almost full output assignment
|
150 |
|
|
assign almost_full_out = almost_full && ~full ;
|
151 |
|
|
|
152 |
|
|
// clear generation for FFs and registers
|
153 |
58 |
mihad |
wire clear = reset_in /*|| flush_in*/ ; // flush not used for write fifo
|
154 |
2 |
mihad |
|
155 |
21 |
mihad |
reg wclock_nempty_detect ;
|
156 |
|
|
always@(posedge reset_in or posedge wclock_in)
|
157 |
|
|
begin
|
158 |
|
|
if (reset_in)
|
159 |
|
|
wclock_nempty_detect <= #`FF_DELAY 1'b0 ;
|
160 |
|
|
else
|
161 |
|
|
wclock_nempty_detect <= #`FF_DELAY (rgrey_addr != wgrey_addr) ;
|
162 |
|
|
end
|
163 |
2 |
mihad |
|
164 |
21 |
mihad |
reg stretched_empty ;
|
165 |
|
|
always@(posedge rclock_in or posedge clear)
|
166 |
|
|
begin
|
167 |
|
|
if(clear)
|
168 |
|
|
stretched_empty <= #`FF_DELAY 1'b1 ;
|
169 |
|
|
else
|
170 |
|
|
stretched_empty <= #`FF_DELAY empty && ~wclock_nempty_detect ;
|
171 |
|
|
end
|
172 |
2 |
mihad |
|
173 |
21 |
mihad |
// empty output is actual empty + 1 read clock cycle ( stretched empty )
|
174 |
|
|
assign empty_out = empty || stretched_empty ;
|
175 |
2 |
mihad |
|
176 |
21 |
mihad |
//rallow generation
|
177 |
|
|
assign rallow = renable_in && ~empty && ~stretched_empty ; // reads allowed if read enable is high and FIFO is not empty
|
178 |
2 |
mihad |
|
179 |
21 |
mihad |
// rallow output assignment
|
180 |
|
|
assign rallow_out = rallow ;
|
181 |
2 |
mihad |
|
182 |
21 |
mihad |
// almost empty output assignment
|
183 |
|
|
assign almost_empty_out = almost_empty && ~empty && ~stretched_empty ;
|
184 |
2 |
mihad |
|
185 |
21 |
mihad |
// at any clock edge that rallow is high, this register provides next read address, so wait cycles are not necessary
|
186 |
|
|
// when FIFO is empty, this register provides actual read address, so first location can be read
|
187 |
|
|
reg [(ADDR_LENGTH - 1):0] raddr_plus_one ;
|
188 |
2 |
mihad |
|
189 |
|
|
|
190 |
21 |
mihad |
// read address mux - when read is performed, next address is driven, so next data is available immediately after read
|
191 |
|
|
// this is convenient for zero wait stait bursts
|
192 |
|
|
assign raddr_out = rallow ? raddr_plus_one : raddr ;
|
193 |
2 |
mihad |
|
194 |
21 |
mihad |
always@(posedge rclock_in or posedge clear)
|
195 |
|
|
begin
|
196 |
|
|
if (clear)
|
197 |
2 |
mihad |
begin
|
198 |
21 |
mihad |
// initial value is one more than initial value of read address - 6
|
199 |
|
|
raddr_plus_one <= #`FF_DELAY 6 ;
|
200 |
2 |
mihad |
end
|
201 |
21 |
mihad |
else if (rallow)
|
202 |
|
|
raddr_plus_one <= #`FF_DELAY raddr_plus_one + 1'b1 ;
|
203 |
|
|
end
|
204 |
2 |
mihad |
|
205 |
21 |
mihad |
// raddr is filled with raddr_plus_one on rising read clock edge when rallow is high
|
206 |
|
|
always@(posedge rclock_in or posedge clear)
|
207 |
|
|
begin
|
208 |
|
|
if (clear)
|
209 |
|
|
// initial value is 5
|
210 |
|
|
raddr <= #`FF_DELAY 5 ;
|
211 |
|
|
else if (rallow)
|
212 |
|
|
raddr <= #`FF_DELAY raddr_plus_one ;
|
213 |
|
|
end
|
214 |
2 |
mihad |
|
215 |
|
|
/*-----------------------------------------------------------------------------------------------
|
216 |
|
|
Read address control consists of Read address counter and Grey Address pipeline
|
217 |
21 |
mihad |
There are 5 Grey addresses:
|
218 |
2 |
mihad |
- rgrey_minus3 is Grey Code of address three before current address
|
219 |
|
|
- rgrey_minus2 is Grey Code of address two before current address
|
220 |
|
|
- rgrey_minus1 is Grey Code of address one before current address
|
221 |
|
|
- rgrey_addr is Grey Code of current read address
|
222 |
|
|
- rgrey_next is Grey Code of next read address
|
223 |
|
|
--------------------------------------------------------------------------------------------------*/
|
224 |
|
|
|
225 |
|
|
// grey code register for three before read address
|
226 |
|
|
always@(posedge rclock_in or posedge clear)
|
227 |
|
|
begin
|
228 |
21 |
mihad |
if (clear)
|
229 |
2 |
mihad |
begin
|
230 |
21 |
mihad |
// initial value is 0
|
231 |
|
|
rgrey_minus3 <= #`FF_DELAY 0 ;
|
232 |
2 |
mihad |
end
|
233 |
21 |
mihad |
else
|
234 |
|
|
if (rallow)
|
235 |
|
|
rgrey_minus3 <= #`FF_DELAY rgrey_minus2 ;
|
236 |
2 |
mihad |
end
|
237 |
|
|
|
238 |
|
|
// grey code register for two before read address
|
239 |
|
|
always@(posedge rclock_in or posedge clear)
|
240 |
|
|
begin
|
241 |
21 |
mihad |
if (clear)
|
242 |
2 |
mihad |
begin
|
243 |
21 |
mihad |
// initial value is 1
|
244 |
|
|
rgrey_minus2 <= #`FF_DELAY 1 ;
|
245 |
2 |
mihad |
end
|
246 |
21 |
mihad |
else
|
247 |
|
|
if (rallow)
|
248 |
|
|
rgrey_minus2 <= #`FF_DELAY rgrey_minus1 ;
|
249 |
2 |
mihad |
end
|
250 |
|
|
|
251 |
|
|
// grey code register for one before read address
|
252 |
|
|
always@(posedge rclock_in or posedge clear)
|
253 |
|
|
begin
|
254 |
21 |
mihad |
if (clear)
|
255 |
2 |
mihad |
begin
|
256 |
21 |
mihad |
// initial value is 3 = ....011
|
257 |
|
|
rgrey_minus1 <= #`FF_DELAY 3 ;
|
258 |
2 |
mihad |
end
|
259 |
21 |
mihad |
else
|
260 |
|
|
if (rallow)
|
261 |
|
|
rgrey_minus1 <= #`FF_DELAY rgrey_addr ;
|
262 |
2 |
mihad |
end
|
263 |
|
|
|
264 |
|
|
// grey code register for read address - represents current Read Address
|
265 |
|
|
always@(posedge rclock_in or posedge clear)
|
266 |
|
|
begin
|
267 |
21 |
mihad |
if (clear)
|
268 |
2 |
mihad |
begin
|
269 |
21 |
mihad |
// initial value is 2 = ....010
|
270 |
|
|
rgrey_addr <= #`FF_DELAY 2 ;
|
271 |
2 |
mihad |
end
|
272 |
21 |
mihad |
else
|
273 |
|
|
if (rallow)
|
274 |
|
|
rgrey_addr <= #`FF_DELAY rgrey_next ;
|
275 |
2 |
mihad |
end
|
276 |
|
|
|
277 |
21 |
mihad |
// grey code register for next read address - represents Grey Code of next read address
|
278 |
2 |
mihad |
always@(posedge rclock_in or posedge clear)
|
279 |
|
|
begin
|
280 |
21 |
mihad |
if (clear)
|
281 |
2 |
mihad |
begin
|
282 |
21 |
mihad |
// initial value is 6 = ....110
|
283 |
|
|
rgrey_next <= #`FF_DELAY 6 ;
|
284 |
2 |
mihad |
end
|
285 |
21 |
mihad |
else
|
286 |
|
|
if (rallow)
|
287 |
|
|
rgrey_next <= #`FF_DELAY {raddr[ADDR_LENGTH - 1], calc_rgrey_next} ;
|
288 |
2 |
mihad |
end
|
289 |
|
|
|
290 |
|
|
/*--------------------------------------------------------------------------------------------
|
291 |
|
|
Write address control consists of write address counter and three Grey Code Registers:
|
292 |
|
|
- wgrey_minus1 holds grey coded address of one before current write address
|
293 |
|
|
- wgrey_addr represents current Grey Coded write address
|
294 |
|
|
- wgrey_next represents Grey Coded next write address
|
295 |
|
|
----------------------------------------------------------------------------------------------*/
|
296 |
|
|
// grey code register for one before write address
|
297 |
|
|
always@(posedge wclock_in or posedge clear)
|
298 |
|
|
begin
|
299 |
21 |
mihad |
if (clear)
|
300 |
2 |
mihad |
begin
|
301 |
21 |
mihad |
// initial value is 3 = .....011
|
302 |
|
|
wgrey_minus1 <= #`FF_DELAY 3 ;
|
303 |
2 |
mihad |
end
|
304 |
21 |
mihad |
else
|
305 |
2 |
mihad |
if (wallow)
|
306 |
21 |
mihad |
wgrey_minus1 <= #`FF_DELAY wgrey_addr ;
|
307 |
2 |
mihad |
end
|
308 |
|
|
|
309 |
|
|
// grey code register for write address
|
310 |
|
|
always@(posedge wclock_in or posedge clear)
|
311 |
|
|
begin
|
312 |
21 |
mihad |
if (clear)
|
313 |
|
|
// initial value is 2 = .....010
|
314 |
|
|
wgrey_addr <= #`FF_DELAY 2 ;
|
315 |
|
|
else
|
316 |
2 |
mihad |
if (wallow)
|
317 |
21 |
mihad |
wgrey_addr <= #`FF_DELAY wgrey_next ;
|
318 |
2 |
mihad |
end
|
319 |
|
|
|
320 |
|
|
// grey code register for next write address
|
321 |
|
|
always@(posedge wclock_in or posedge clear)
|
322 |
|
|
begin
|
323 |
21 |
mihad |
if (clear)
|
324 |
2 |
mihad |
begin
|
325 |
21 |
mihad |
// initial value is 6 = ....0110
|
326 |
|
|
wgrey_next <= #`FF_DELAY 6 ;
|
327 |
2 |
mihad |
end
|
328 |
21 |
mihad |
else
|
329 |
2 |
mihad |
if (wallow)
|
330 |
|
|
wgrey_next <= #`FF_DELAY {waddr[(ADDR_LENGTH - 1)], calc_wgrey_next} ;
|
331 |
|
|
end
|
332 |
|
|
|
333 |
21 |
mihad |
// write address counter - nothing special except initial value
|
334 |
2 |
mihad |
always@(posedge wclock_in or posedge clear)
|
335 |
|
|
begin
|
336 |
21 |
mihad |
if (clear)
|
337 |
|
|
// initial value 5
|
338 |
|
|
waddr <= #`FF_DELAY 5 ;
|
339 |
|
|
else
|
340 |
|
|
if (wallow)
|
341 |
|
|
waddr <= #`FF_DELAY waddr + 1'b1 ;
|
342 |
2 |
mihad |
end
|
343 |
|
|
|
344 |
|
|
/*------------------------------------------------------------------------------------------------------------------------------
|
345 |
|
|
Registered full control:
|
346 |
|
|
registered full is set on rising edge of wclock_in, when one location is left in fifo and another is written
|
347 |
|
|
It's kept high until something is read from FIFO, which is registered on
|
348 |
|
|
next rising write clock edge.
|
349 |
|
|
|
350 |
|
|
Registered almost full control:
|
351 |
|
|
registered almost full is set on rising edge of write clock when two locations are left in fifo and another is written to it.
|
352 |
|
|
it's kept high until something is read/written from/to fifo
|
353 |
|
|
|
354 |
|
|
Registered two left control:
|
355 |
|
|
registered two left is set on rising edge of write clock when three locations are left in fifo and another is written to it.
|
356 |
|
|
it's kept high until something is read/written from/to fifo.
|
357 |
|
|
--------------------------------------------------------------------------------------------------------------------------------*/
|
358 |
|
|
reg two_left_out ;
|
359 |
|
|
wire comb_full = wgrey_next == rgrey_addr ;
|
360 |
|
|
wire comb_almost_full = wgrey_addr == rgrey_minus2 ;
|
361 |
|
|
wire comb_two_left = wgrey_next == rgrey_minus2 ;
|
362 |
|
|
wire comb_three_left = wgrey_next == rgrey_minus3 ;
|
363 |
|
|
|
364 |
|
|
//combinatorial input to Registered full FlipFlop
|
365 |
|
|
wire reg_full = (wallow && comb_almost_full) || (comb_full) ;
|
366 |
|
|
|
367 |
|
|
always@(posedge wclock_in or posedge clear)
|
368 |
|
|
begin
|
369 |
|
|
if (clear)
|
370 |
|
|
full <= #`FF_DELAY 1'b0 ;
|
371 |
|
|
else
|
372 |
|
|
full <= #`FF_DELAY reg_full ;
|
373 |
|
|
end
|
374 |
|
|
|
375 |
|
|
// input for almost full flip flop
|
376 |
|
|
wire reg_almost_full_in = wallow && comb_two_left || comb_almost_full ;
|
377 |
|
|
|
378 |
|
|
always@(posedge clear or posedge wclock_in)
|
379 |
|
|
begin
|
380 |
|
|
if (clear)
|
381 |
|
|
almost_full <= #`FF_DELAY 1'b0 ;
|
382 |
|
|
else
|
383 |
|
|
almost_full <= #`FF_DELAY reg_almost_full_in ;
|
384 |
|
|
end
|
385 |
|
|
|
386 |
|
|
wire reg_two_left_in = wallow && comb_three_left || comb_two_left ;
|
387 |
|
|
|
388 |
|
|
always@(posedge clear or posedge wclock_in)
|
389 |
|
|
begin
|
390 |
|
|
if (clear)
|
391 |
|
|
two_left_out <= #`FF_DELAY 1'b0 ;
|
392 |
|
|
else
|
393 |
|
|
two_left_out <= #`FF_DELAY reg_two_left_in ;
|
394 |
|
|
end
|
395 |
|
|
|
396 |
|
|
/*------------------------------------------------------------------------------------------------------------------------------
|
397 |
|
|
Registered empty control:
|
398 |
21 |
mihad |
registered empty is set on rising edge of rclock_in,
|
399 |
2 |
mihad |
when only one location is used in and read from fifo. It's kept high until something is written to FIFO, which is registered on
|
400 |
|
|
the next read clock.
|
401 |
|
|
|
402 |
|
|
Registered almost empty control:
|
403 |
|
|
almost empty is set on rising clock edge of rclock when two locations are used and one read from FIFO. It's kept high until
|
404 |
|
|
something is read/written from/to fifo.
|
405 |
|
|
--------------------------------------------------------------------------------------------------------------------------------*/
|
406 |
|
|
wire comb_almost_empty = rgrey_next == wgrey_addr ;
|
407 |
|
|
wire comb_empty = rgrey_addr == wgrey_addr ;
|
408 |
|
|
wire comb_two_used = rgrey_next == wgrey_minus1 ;
|
409 |
|
|
|
410 |
|
|
// combinatorial input for registered emty FlipFlop
|
411 |
|
|
wire reg_empty = (rallow && comb_almost_empty) || comb_empty ;
|
412 |
|
|
|
413 |
|
|
always@(posedge rclock_in or posedge clear)
|
414 |
|
|
begin
|
415 |
|
|
if (clear)
|
416 |
|
|
empty <= #`FF_DELAY 1'b1 ;
|
417 |
|
|
else
|
418 |
|
|
empty <= #`FF_DELAY reg_empty ;
|
419 |
|
|
end
|
420 |
|
|
|
421 |
|
|
// input for almost empty flip flop
|
422 |
|
|
wire reg_almost_empty = rallow && comb_two_used || comb_almost_empty ;
|
423 |
|
|
always@(posedge clear or posedge rclock_in)
|
424 |
|
|
begin
|
425 |
|
|
if (clear)
|
426 |
|
|
almost_empty <= #`FF_DELAY 1'b0 ;
|
427 |
|
|
else
|
428 |
|
|
almost_empty <= #`FF_DELAY reg_almost_empty ;
|
429 |
|
|
end
|
430 |
|
|
|
431 |
|
|
endmodule
|