URL https://opencores.org/ocsvn/pci/pci/trunk

Subversion Repositories pci

[/] [pci/] [tags/] [rel_3/] [rtl/] [verilog/] [wb_tpram.v] - Blame information for rev 18

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Generic Two-Port Synchronous RAM                            ////
////                                                              ////
////  This file is part of pci bridge project                     ////
////  http://www.opencores.org/cvsweb.shtml/pci/                  ////
////                                                              ////
////  Description                                                 ////
////  This block is a wrapper with common two-port                ////
////  synchronous memory interface for different                  ////
////  types of ASIC and FPGA RAMs. Beside universal memory        ////
////  interface it also provides behavioral model of generic      ////
////  two-port synchronous RAM.                                   ////
////  It should be used in all OPENCORES designs that want to be  ////
////  portable accross different target technologies and          ////
////  independent of target memory.                               ////
////                                                              ////
////  Supported ASIC RAMs are:                                    ////
////  - Artisan Double-Port Sync RAM                              ////
////  - Avant! Two-Port Sync RAM (*)                              ////
////  - Virage 2-port Sync RAM                                    ////
////                                                              ////
////  Supported FPGA RAMs are:                                    ////
////  - Xilinx Virtex RAMB4_S16_S16                               ////
////                                                              ////
////  To Do:                                                      ////
////   - fix Avant!                                               ////
////   - xilinx rams need external tri-state logic                ////
////   - add additional RAMs (Altera, VS etc)                     ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////      - Miha Dolenc, mihad@opencores.org                      ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
//
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "pci_constants.v"
 
module WB_TPRAM
(
        // Generic synchronous two-port RAM interface
        clk_a,
    rst_a,
    ce_a,
    we_a,
    oe_a,
    addr_a,
    di_a,
    do_a,
        clk_b,
    rst_b,
    ce_b,
    we_b,
    oe_b,
    addr_b,
    di_b,
    do_b
);
 
//
// Default address and data buses width
//
parameter aw = 8;
parameter dw = 40;
 
//
// Generic synchronous two-port RAM interface
//
input                   clk_a;  // Clock
input                   rst_a;  // Reset
input                   ce_a;   // Chip enable input
input                   we_a;   // Write enable input
input                   oe_a;   // Output enable input
input   [aw-1:0] addr_a; // address bus inputs
input   [dw-1:0] di_a;   // input data bus
output  [dw-1:0] do_a;   // output data bus
input                   clk_b;  // Clock
input                   rst_b;  // Reset
input                   ce_b;   // Chip enable input
input                   we_b;   // Write enable input
input                   oe_b;   // Output enable input
input   [aw-1:0] addr_b; // address bus inputs
input   [dw-1:0] di_b;   // input data bus
output  [dw-1:0] do_b;   // output data bus
 
//
// Internal wires and registers
//
 
 
`ifdef WB_ARTISAN_SDP
    `define RAM_SELECTED
    //
    // Instantiation of ASIC memory:
    //
    // Artisan Synchronous Double-Port RAM (ra2sh)
    //
    art_hsdp_256x40 /*#(dw, 1<<aw, aw) */ artisan_sdp
    (
        .qa(do_a),
        .clka(clk_a),
        .cena(~ce_a),
        .wena(~we_a),
        .aa(addr_a),
        .da(di_a),
        .oena(~oe_a),
        .qb(do_b),
        .clkb(clk_b),
        .cenb(~ce_b),
        .wenb(~we_b),
        .ab(addr_b),
        .db(di_b),
        .oenb(~oe_b)
    );
 
`endif
 
`ifdef AVANT_ATP
    `define RAM_SELECTED
    //
    // Instantiation of ASIC memory:
    //
    // Avant! Asynchronous Two-Port RAM
    //
    avant_atp avant_atp(
        .web(~we),
        .reb(),
        .oeb(~oe),
        .rcsb(),
        .wcsb(),
        .ra(addr),
        .wa(addr),
        .di(di),
        .do(do)
    );
 
`endif
 
`ifdef VIRAGE_STP
    `define RAM_SELECTED
    //
    // Instantiation of ASIC memory:
    //
    // Virage Synchronous 2-port R/W RAM
    //
    virage_stp virage_stp(
        .QA(do_a),
        .QB(do_b),
 
        .ADRA(addr_a),
        .DA(di_a),
        .WEA(we_a),
        .OEA(oe_a),
        .MEA(ce_a),
        .CLKA(clk_a),
 
        .ADRB(adr_b),
        .DB(di_b),
        .WEB(we_b),
        .OEB(oe_b),
        .MEB(ce_b),
        .CLKB(clk_b)
    );
 
`endif
 
`ifdef WB_XILINX_RAMB4
    `define RAM_SELECTED
    //
    // Instantiation of FPGA memory:
    //
    // Virtex/Spartan2
    //
 
    //
    // Block 0
    //
 
    RAMB4_S16_S16 ramb4_s16_s16_0(
        .CLKA(clk_a),
        .RSTA(rst_a),
        .ADDRA(addr_a),
        .DIA(di_a[15:0]),
        .ENA(ce_a),
        .WEA(we_a),
        .DOA(do_a[15:0]),
 
        .CLKB(clk_b),
        .RSTB(rst_b),
        .ADDRB(addr_b),
        .DIB(di_b[15:0]),
        .ENB(ce_b),
        .WEB(we_b),
        .DOB(do_b[15:0])
    );
 
    //
    // Block 1
    //
 
    RAMB4_S16_S16 ramb4_s16_s16_1(
        .CLKA(clk_a),
        .RSTA(rst_a),
        .ADDRA(addr_a),
        .DIA(di_a[31:16]),
        .ENA(ce_a),
        .WEA(we_a),
        .DOA(do_a[31:16]),
 
        .CLKB(clk_b),
        .RSTB(rst_b),
        .ADDRB(addr_b),
        .DIB(di_b[31:16]),
        .ENB(ce_b),
        .WEB(we_b),
        .DOB(do_b[31:16])
    );
 
    //
    // Block 2
    //
    // block ram2 wires - non generic width of block rams
    wire [15:0] blk2_di_a = {8'h00, di_a[39:32]} ;
    wire [15:0] blk2_di_b = {8'h00, di_b[39:32]} ;
 
    wire [15:0] blk2_do_a ;
    wire [15:0] blk2_do_b ;
 
    assign do_a[39:32] = blk2_do_a[7:0] ;
    assign do_b[39:32] = blk2_do_b[7:0] ;
 
    RAMB4_S16_S16 ramb4_s16_s16_2(
            .CLKA(clk_a),
            .RSTA(rst_a),
            .ADDRA(addr_a),
            .DIA(blk2_di_a),
            .ENA(ce_a),
            .WEA(we_a),
            .DOA(blk2_do_a),
 
            .CLKB(clk_b),
            .RSTB(rst_b),
            .ADDRB(addr_b),
            .DIB(blk2_di_b),
            .ENB(ce_b),
            .WEB(we_b),
            .DOB(blk2_do_b)
    );
 
`endif
`ifdef WB_XILINX_DIST_RAM
    `define RAM_SELECTED
    reg [(aw-1):0] out_address ;
    always@(posedge clk_b or posedge rst_b)
    begin
        if ( rst_b )
            out_address <= #1 0 ;
        else if (ce_b)
            out_address <= #1 addr_b ;
    end
 
    WB_DIST_RAM #(aw) wb_distributed_ram
    (
        .data_out       (do_b),
        .we             (we_a),
        .data_in        (di_a),
        .read_address   (out_address),
        .write_address  (addr_a),
        .wclk           (clk_a)
    );
`endif
 
`ifdef RAM_SELECTED
    `undef RAM_SELECTED
`else
    //
    // Generic two-port synchronous RAM model
    //
 
    //
    // Generic RAM's registers and wires
    //
    reg [dw-1:0] mem [(1<<aw)-1:0];       // RAM content
    reg [dw-1:0] do_reg_a;               // RAM data output register
    reg [dw-1:0] do_reg_b;               // RAM data output register
 
    //
    // Data output drivers
    //
    assign do_a = (oe_a) ? do_reg_a : {dw{1'bz}};
    assign do_b = (oe_b) ? do_reg_b : {dw{1'bz}};
 
    //
    // RAM read and write
    //
    always @(posedge clk_a)
        if (ce_a && !we_a)
                do_reg_a <= #1 mem[addr_a];
        else if (ce_a && we_a)
                mem[addr_a] <= #1 di_a;
 
    //
    // RAM read and write
    //
    always @(posedge clk_b)
        if (ce_b && !we_b)
                do_reg_b <= #1 mem[addr_b];
        else if (ce_b && we_b)
                mem[addr_b] <= #1 di_b;
`endif
 
// synopsys translate_off
initial
begin
    if (dw !== 40)
    begin
        $display("RAM instantiation error! Expected RAM width %d, actual %h!", 40, dw) ;
        $finish ;
    end
    `ifdef XILINX_RAMB4
        if (aw !== 8)
        begin
            $display("RAM instantiation error! Expected RAM address width %d, actual %h!", 40, aw) ;
            $finish ;
        end
    `endif
    // currenlty only artisan ram of depth 256 is supported - they don't provide generic ram models
    `ifdef ARTISAN_SDP
        if (aw !== 8)
        begin
            $display("RAM instantiation error! Expected RAM address width %d, actual %h!", 40, aw) ;
            $finish ;
        end
    `endif
end
// synopsys translate_on
 
endmodule
 
`ifdef WB_XILINX_DIST_RAM
module WB_DIST_RAM (data_out, we, data_in, read_address, write_address, wclk);
    parameter addr_width = 4 ;
    output [39:0] data_out;
    input we, wclk;
    input [39:0] data_in;
    input [addr_width - 1:0] write_address, read_address;
 
    wire [3:0] waddr = write_address ;
    wire [3:0] raddr = read_address ;
 
    RAM16X1D ram00 (.DPO(data_out[0]),  .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[0]),  .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram01 (.DPO(data_out[1]),  .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[1]),  .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram02 (.DPO(data_out[2]),  .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[2]),  .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram03 (.DPO(data_out[3]),  .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[3]),  .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram04 (.DPO(data_out[4]),  .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[4]),  .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram05 (.DPO(data_out[5]),  .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[5]),  .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram06 (.DPO(data_out[6]),  .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[6]),  .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram07 (.DPO(data_out[7]),  .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[7]),  .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram08 (.DPO(data_out[8]),  .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[8]),  .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram09 (.DPO(data_out[9]),  .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[9]),  .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram10 (.DPO(data_out[10]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[10]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram11 (.DPO(data_out[11]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[11]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram12 (.DPO(data_out[12]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[12]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram13 (.DPO(data_out[13]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[13]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram14 (.DPO(data_out[14]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[14]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram15 (.DPO(data_out[15]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[15]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram16 (.DPO(data_out[16]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[16]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram17 (.DPO(data_out[17]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[17]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram18 (.DPO(data_out[18]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[18]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram19 (.DPO(data_out[19]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[19]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram20 (.DPO(data_out[20]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[20]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram21 (.DPO(data_out[21]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[21]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram22 (.DPO(data_out[22]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[22]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram23 (.DPO(data_out[23]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[23]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram24 (.DPO(data_out[24]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[24]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram25 (.DPO(data_out[25]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[25]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram26 (.DPO(data_out[26]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[26]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram27 (.DPO(data_out[27]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[27]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram28 (.DPO(data_out[28]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[28]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram29 (.DPO(data_out[29]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[29]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram30 (.DPO(data_out[30]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[30]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram31 (.DPO(data_out[31]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[31]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram32 (.DPO(data_out[32]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[32]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram33 (.DPO(data_out[33]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[33]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram34 (.DPO(data_out[34]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[34]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram35 (.DPO(data_out[35]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[35]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram36 (.DPO(data_out[36]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[36]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram37 (.DPO(data_out[37]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[37]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram38 (.DPO(data_out[38]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[38]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
    RAM16X1D ram39 (.DPO(data_out[39]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[39]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));
endmodule
`endif

Browse

Tools

Subversion Repositories pci

[/] [pci/] [tags/] [rel_3/] [rtl/] [verilog/] [wb_tpram.v] - Blame information for rev 18

Line No.	Rev	Author	Line
1	18	mihad	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// Generic Two-Port Synchronous RAM ////`
4			`//// ////`
5			`//// This file is part of pci bridge project ////`
6			`//// http://www.opencores.org/cvsweb.shtml/pci/ ////`
7			`//// ////`
8			`//// Description ////`
9			`//// This block is a wrapper with common two-port ////`
10			`//// synchronous memory interface for different ////`
11			`//// types of ASIC and FPGA RAMs. Beside universal memory ////`
12			`//// interface it also provides behavioral model of generic ////`
13			`//// two-port synchronous RAM. ////`
14			`//// It should be used in all OPENCORES designs that want to be ////`
15			`//// portable accross different target technologies and ////`
16			`//// independent of target memory. ////`
17			`//// ////`
18			`//// Supported ASIC RAMs are: ////`
19			`//// - Artisan Double-Port Sync RAM ////`
20			`//// - Avant! Two-Port Sync RAM (*) ////`
21			`//// - Virage 2-port Sync RAM ////`
22			`//// ////`
23			`//// Supported FPGA RAMs are: ////`
24			`//// - Xilinx Virtex RAMB4_S16_S16 ////`
25			`//// ////`
26			`//// To Do: ////`
27			`//// - fix Avant! ////`
28			`//// - xilinx rams need external tri-state logic ////`
29			`//// - add additional RAMs (Altera, VS etc) ////`
30			`//// ////`
31			`//// Author(s): ////`
32			`//// - Damjan Lampret, lampret@opencores.org ////`
33			`//// - Miha Dolenc, mihad@opencores.org ////`
34			`//// ////`
35			`//////////////////////////////////////////////////////////////////////`
36			`//// ////`
37			`//// Copyright (C) 2000 Authors and OPENCORES.ORG ////`
38			`//// ////`
39			`//// This source file may be used and distributed without ////`
40			`//// restriction provided that this copyright statement is not ////`
41			`//// removed from the file and that any derivative work contains ////`
42			`//// the original copyright notice and the associated disclaimer. ////`
43			`//// ////`
44			`//// This source file is free software; you can redistribute it ////`
45			`//// and/or modify it under the terms of the GNU Lesser General ////`
46			`//// Public License as published by the Free Software Foundation; ////`
47			`//// either version 2.1 of the License, or (at your option) any ////`
48			`//// later version. ////`
49			`//// ////`
50			`//// This source is distributed in the hope that it will be ////`
51			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
52			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
53			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
54			`//// details. ////`
55			`//// ////`
56			`//// You should have received a copy of the GNU Lesser General ////`
57			`//// Public License along with this source; if not, download it ////`
58			`//// from http://www.opencores.org/lgpl.shtml ////`
59			`//// ////`
60			`//////////////////////////////////////////////////////////////////////`
61			`//`
62			`// CVS Revision History`
63			`//`
64			`// $Log: not supported by cvs2svn $`
65			`//`
66
67			`// synopsys translate_off`
68			`include "timescale.v"
69			`// synopsys translate_on`
70			`include "pci_constants.v"
71
72			`module WB_TPRAM`
73			`(`
74			`// Generic synchronous two-port RAM interface`
75			`clk_a,`
76			`rst_a,`
77			`ce_a,`
78			`we_a,`
79			`oe_a,`
80			`addr_a,`
81			`di_a,`
82			`do_a,`
83			`clk_b,`
84			`rst_b,`
85			`ce_b,`
86			`we_b,`
87			`oe_b,`
88			`addr_b,`
89			`di_b,`
90			`do_b`
91			`);`
92
93			`//`
94			`// Default address and data buses width`
95			`//`
96			`parameter aw = 8;`
97			`parameter dw = 40;`
98
99			`//`
100			`// Generic synchronous two-port RAM interface`
101			`//`
102			`input clk_a; // Clock`
103			`input rst_a; // Reset`
104			`input ce_a; // Chip enable input`
105			`input we_a; // Write enable input`
106			`input oe_a; // Output enable input`
107			`input [aw-1:0] addr_a; // address bus inputs`
108			`input [dw-1:0] di_a; // input data bus`
109			`output [dw-1:0] do_a; // output data bus`
110			`input clk_b; // Clock`
111			`input rst_b; // Reset`
112			`input ce_b; // Chip enable input`
113			`input we_b; // Write enable input`
114			`input oe_b; // Output enable input`
115			`input [aw-1:0] addr_b; // address bus inputs`
116			`input [dw-1:0] di_b; // input data bus`
117			`output [dw-1:0] do_b; // output data bus`
118
119			`//`
120			`// Internal wires and registers`
121			`//`
122
123
124			`ifdef WB_ARTISAN_SDP
125			`define RAM_SELECTED
126			`//`
127			`// Instantiation of ASIC memory:`
128			`//`
129			`// Artisan Synchronous Double-Port RAM (ra2sh)`
130			`//`
131			`art_hsdp_256x40 /#(dw, 1<<aw, aw) / artisan_sdp`
132			`(`
133			`.qa(do_a),`
134			`.clka(clk_a),`
135			`.cena(~ce_a),`
136			`.wena(~we_a),`
137			`.aa(addr_a),`
138			`.da(di_a),`
139			`.oena(~oe_a),`
140			`.qb(do_b),`
141			`.clkb(clk_b),`
142			`.cenb(~ce_b),`
143			`.wenb(~we_b),`
144			`.ab(addr_b),`
145			`.db(di_b),`
146			`.oenb(~oe_b)`
147			`);`
148
149			`endif
150
151			`ifdef AVANT_ATP
152			`define RAM_SELECTED
153			`//`
154			`// Instantiation of ASIC memory:`
155			`//`
156			`// Avant! Asynchronous Two-Port RAM`
157			`//`
158			`avant_atp avant_atp(`
159			`.web(~we),`
160			`.reb(),`
161			`.oeb(~oe),`
162			`.rcsb(),`
163			`.wcsb(),`
164			`.ra(addr),`
165			`.wa(addr),`
166			`.di(di),`
167			`.do(do)`
168			`);`
169
170			`endif
171
172			`ifdef VIRAGE_STP
173			`define RAM_SELECTED
174			`//`
175			`// Instantiation of ASIC memory:`
176			`//`
177			`// Virage Synchronous 2-port R/W RAM`
178			`//`
179			`virage_stp virage_stp(`
180			`.QA(do_a),`
181			`.QB(do_b),`
182
183			`.ADRA(addr_a),`
184			`.DA(di_a),`
185			`.WEA(we_a),`
186			`.OEA(oe_a),`
187			`.MEA(ce_a),`
188			`.CLKA(clk_a),`
189
190			`.ADRB(adr_b),`
191			`.DB(di_b),`
192			`.WEB(we_b),`
193			`.OEB(oe_b),`
194			`.MEB(ce_b),`
195			`.CLKB(clk_b)`
196			`);`
197
198			`endif
199
200			`ifdef WB_XILINX_RAMB4
201			`define RAM_SELECTED
202			`//`
203			`// Instantiation of FPGA memory:`
204			`//`
205			`// Virtex/Spartan2`
206			`//`
207
208			`//`
209			`// Block 0`
210			`//`
211
212			`RAMB4_S16_S16 ramb4_s16_s16_0(`
213			`.CLKA(clk_a),`
214			`.RSTA(rst_a),`
215			`.ADDRA(addr_a),`
216			`.DIA(di_a[15:0]),`
217			`.ENA(ce_a),`
218			`.WEA(we_a),`
219			`.DOA(do_a[15:0]),`
220
221			`.CLKB(clk_b),`
222			`.RSTB(rst_b),`
223			`.ADDRB(addr_b),`
224			`.DIB(di_b[15:0]),`
225			`.ENB(ce_b),`
226			`.WEB(we_b),`
227			`.DOB(do_b[15:0])`
228			`);`
229
230			`//`
231			`// Block 1`
232			`//`
233
234			`RAMB4_S16_S16 ramb4_s16_s16_1(`
235			`.CLKA(clk_a),`
236			`.RSTA(rst_a),`
237			`.ADDRA(addr_a),`
238			`.DIA(di_a[31:16]),`
239			`.ENA(ce_a),`
240			`.WEA(we_a),`
241			`.DOA(do_a[31:16]),`
242
243			`.CLKB(clk_b),`
244			`.RSTB(rst_b),`
245			`.ADDRB(addr_b),`
246			`.DIB(di_b[31:16]),`
247			`.ENB(ce_b),`
248			`.WEB(we_b),`
249			`.DOB(do_b[31:16])`
250			`);`
251
252			`//`
253			`// Block 2`
254			`//`
255			`// block ram2 wires - non generic width of block rams`
256			`wire [15:0] blk2_di_a = {8'h00, di_a[39:32]} ;`
257			`wire [15:0] blk2_di_b = {8'h00, di_b[39:32]} ;`
258
259			`wire [15:0] blk2_do_a ;`
260			`wire [15:0] blk2_do_b ;`
261
262			`assign do_a[39:32] = blk2_do_a[7:0] ;`
263			`assign do_b[39:32] = blk2_do_b[7:0] ;`
264
265			`RAMB4_S16_S16 ramb4_s16_s16_2(`
266			`.CLKA(clk_a),`
267			`.RSTA(rst_a),`
268			`.ADDRA(addr_a),`
269			`.DIA(blk2_di_a),`
270			`.ENA(ce_a),`
271			`.WEA(we_a),`
272			`.DOA(blk2_do_a),`
273
274			`.CLKB(clk_b),`
275			`.RSTB(rst_b),`
276			`.ADDRB(addr_b),`
277			`.DIB(blk2_di_b),`
278			`.ENB(ce_b),`
279			`.WEB(we_b),`
280			`.DOB(blk2_do_b)`
281			`);`
282
283			`endif
284			`ifdef WB_XILINX_DIST_RAM
285			`define RAM_SELECTED
286			`reg [(aw-1):0] out_address ;`
287			`always@(posedge clk_b or posedge rst_b)`
288			`begin`
289			`if ( rst_b )`
290			`out_address <= #1 0 ;`
291			`else if (ce_b)`
292			`out_address <= #1 addr_b ;`
293			`end`
294
295			`WB_DIST_RAM #(aw) wb_distributed_ram`
296			`(`
297			`.data_out (do_b),`
298			`.we (we_a),`
299			`.data_in (di_a),`
300			`.read_address (out_address),`
301			`.write_address (addr_a),`
302			`.wclk (clk_a)`
303			`);`
304			`endif
305
306			`ifdef RAM_SELECTED
307			`undef RAM_SELECTED
308			`else
309			`//`
310			`// Generic two-port synchronous RAM model`
311			`//`
312
313			`//`
314			`// Generic RAM's registers and wires`
315			`//`
316			`reg [dw-1:0] mem [(1<<aw)-1:0]; // RAM content`
317			`reg [dw-1:0] do_reg_a; // RAM data output register`
318			`reg [dw-1:0] do_reg_b; // RAM data output register`
319
320			`//`
321			`// Data output drivers`
322			`//`
323			`assign do_a = (oe_a) ? do_reg_a : {dw{1'bz}};`
324			`assign do_b = (oe_b) ? do_reg_b : {dw{1'bz}};`
325
326			`//`
327			`// RAM read and write`
328			`//`
329			`always @(posedge clk_a)`
330			`if (ce_a && !we_a)`
331			`do_reg_a <= #1 mem[addr_a];`
332			`else if (ce_a && we_a)`
333			`mem[addr_a] <= #1 di_a;`
334
335			`//`
336			`// RAM read and write`
337			`//`
338			`always @(posedge clk_b)`
339			`if (ce_b && !we_b)`
340			`do_reg_b <= #1 mem[addr_b];`
341			`else if (ce_b && we_b)`
342			`mem[addr_b] <= #1 di_b;`
343			`endif
344
345			`// synopsys translate_off`
346			`initial`
347			`begin`
348			`if (dw !== 40)`
349			`begin`
350			`$display("RAM instantiation error! Expected RAM width %d, actual %h!", 40, dw) ;`
351			`$finish ;`
352			`end`
353			`ifdef XILINX_RAMB4
354			`if (aw !== 8)`
355			`begin`
356			`$display("RAM instantiation error! Expected RAM address width %d, actual %h!", 40, aw) ;`
357			`$finish ;`
358			`end`
359			`endif
360			`// currenlty only artisan ram of depth 256 is supported - they don't provide generic ram models`
361			`ifdef ARTISAN_SDP
362			`if (aw !== 8)`
363			`begin`
364			`$display("RAM instantiation error! Expected RAM address width %d, actual %h!", 40, aw) ;`
365			`$finish ;`
366			`end`
367			`endif
368			`end`
369			`// synopsys translate_on`
370
371			`endmodule`
372
373			`ifdef WB_XILINX_DIST_RAM
374			`module WB_DIST_RAM (data_out, we, data_in, read_address, write_address, wclk);`
375			`parameter addr_width = 4 ;`
376			`output [39:0] data_out;`
377			`input we, wclk;`
378			`input [39:0] data_in;`
379			`input [addr_width - 1:0] write_address, read_address;`
380
381			`wire [3:0] waddr = write_address ;`
382			`wire [3:0] raddr = read_address ;`
383
384			`RAM16X1D ram00 (.DPO(data_out[0]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[0]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
385			`RAM16X1D ram01 (.DPO(data_out[1]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[1]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
386			`RAM16X1D ram02 (.DPO(data_out[2]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[2]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
387			`RAM16X1D ram03 (.DPO(data_out[3]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[3]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
388			`RAM16X1D ram04 (.DPO(data_out[4]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[4]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
389			`RAM16X1D ram05 (.DPO(data_out[5]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[5]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
390			`RAM16X1D ram06 (.DPO(data_out[6]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[6]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
391			`RAM16X1D ram07 (.DPO(data_out[7]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[7]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
392			`RAM16X1D ram08 (.DPO(data_out[8]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[8]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
393			`RAM16X1D ram09 (.DPO(data_out[9]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[9]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
394			`RAM16X1D ram10 (.DPO(data_out[10]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[10]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
395			`RAM16X1D ram11 (.DPO(data_out[11]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[11]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
396			`RAM16X1D ram12 (.DPO(data_out[12]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[12]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
397			`RAM16X1D ram13 (.DPO(data_out[13]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[13]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
398			`RAM16X1D ram14 (.DPO(data_out[14]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[14]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
399			`RAM16X1D ram15 (.DPO(data_out[15]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[15]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
400			`RAM16X1D ram16 (.DPO(data_out[16]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[16]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
401			`RAM16X1D ram17 (.DPO(data_out[17]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[17]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
402			`RAM16X1D ram18 (.DPO(data_out[18]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[18]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
403			`RAM16X1D ram19 (.DPO(data_out[19]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[19]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
404			`RAM16X1D ram20 (.DPO(data_out[20]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[20]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
405			`RAM16X1D ram21 (.DPO(data_out[21]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[21]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
406			`RAM16X1D ram22 (.DPO(data_out[22]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[22]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
407			`RAM16X1D ram23 (.DPO(data_out[23]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[23]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
408			`RAM16X1D ram24 (.DPO(data_out[24]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[24]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
409			`RAM16X1D ram25 (.DPO(data_out[25]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[25]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
410			`RAM16X1D ram26 (.DPO(data_out[26]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[26]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
411			`RAM16X1D ram27 (.DPO(data_out[27]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[27]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
412			`RAM16X1D ram28 (.DPO(data_out[28]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[28]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
413			`RAM16X1D ram29 (.DPO(data_out[29]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[29]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
414			`RAM16X1D ram30 (.DPO(data_out[30]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[30]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
415			`RAM16X1D ram31 (.DPO(data_out[31]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[31]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
416			`RAM16X1D ram32 (.DPO(data_out[32]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[32]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
417			`RAM16X1D ram33 (.DPO(data_out[33]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[33]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
418			`RAM16X1D ram34 (.DPO(data_out[34]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[34]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
419			`RAM16X1D ram35 (.DPO(data_out[35]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[35]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
420			`RAM16X1D ram36 (.DPO(data_out[36]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[36]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
421			`RAM16X1D ram37 (.DPO(data_out[37]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[37]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
422			`RAM16X1D ram38 (.DPO(data_out[38]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[38]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
423			`RAM16X1D ram39 (.DPO(data_out[39]), .SPO(), .A0(waddr[0]), .A1(waddr[1]), .A2(waddr[2]), .A3(waddr[3]), .D(data_in[39]), .DPRA0(raddr[0]), .DPRA1(raddr[1]), .DPRA2(raddr[2]), .DPRA3(raddr[3]), .WCLK(wclk), .WE(we));`
424			`endmodule`
425			`endif