Subversion Repositories pcie_ds_dma

-------------------------------------------------------------------------------

--

-- Title       : pcie_core64_wishbone_m8

-- Author      : Dmitry Smekhov

-- Company     : Instrumental Systems

-- E-mail      : dsmv@insys.ru

--

-- Version     : 1.0

--

-------------------------------------------------------------------------------

--

-- Description :  PCI Express controller

--                                Modification 8 - Wishbone - Virtex 5 PCI Express v1.1 x8

--

-------------------------------------------------------------------------------

-- 

-- Version 1.0  20.04.2013

--              Created from  pcie_core64_wishbone v1.3

-- 

-------------------------------------------------------------------------------

library ieee;

use ieee.std_logic_1164.all;

package pcie_core64_wishbone_m8_pkg is

component pcie_core64_wishbone_m8 is

generic

(

    Device_ID       : in std_logic_vector( 15 downto 0 ):=x"0000";  -- идентификатор модуля

    Revision        : in std_logic_vector( 15 downto 0 ):=x"0000";  -- версия модуля

    PLD_VER         : in std_logic_vector( 15 downto 0 ):=x"0000";  -- версия ПЛИС

    is_simulation   : integer:=0         --! 0 - synthesis, 1 - simulation                            

);

port

(

    ---- PCI-Express ----

    txp             : out std_logic_vector( 7 downto 0 );

    txn             : out std_logic_vector( 7 downto 0 );

    rxp             : in  std_logic_vector( 7 downto 0 );

    rxn             : in  std_logic_vector( 7 downto 0 );

    mgt250          : in  std_logic;    -- reference clock 250 MHz from PCI_Express

    perst           : in  std_logic;    -- 0 - reset

    px              : out std_logic_vector( 7 downto 0 );   --! контрольные точки 

    pcie_lstatus    : out std_logic_vector( 15 downto 0 );  -- регистр LSTATUS

    pcie_link_up    : out std_logic;                        -- 0 - завершена инициализация PCI-Express

    ---- Wishbone SYS_CON -----

    o_wb_clk        :   out std_logic;

    o_wb_rst        :   out std_logic;

    ---- Wishbone BUS -----

    ov_wbm_addr     :   out std_logic_vector(31 downto 0);

    ov_wbm_data     :   out std_logic_vector(63 downto 0);

    ov_wbm_sel      :   out std_logic_vector( 7 downto 0);

    o_wbm_we        :   out std_logic;

    o_wbm_cyc       :   out std_logic;

    o_wbm_stb       :   out std_logic;

    ov_wbm_cti      :   out std_logic_vector( 2 downto 0);  -- Cycle Type Identifier Address Tag

    ov_wbm_bte      :   out std_logic_vector( 1 downto 0);  -- Burst Type Extension Address Tag

    iv_wbm_data     :   in  std_logic_vector(63 downto 0);

    i_wbm_ack       :   in  std_logic;

    i_wbm_err       :   in  std_logic;                      -- error input - abnormal cycle termination

    i_wbm_rty       :   in  std_logic;                      -- retry input - interface is not ready

    i_wdm_irq_0     :   in  std_logic;

    iv_wbm_irq_dmar :   in  std_logic_vector( 1 downto 0)

);

end component pcie_core64_wishbone_m8;

end package pcie_core64_wishbone_m8_pkg;

-------------------------------------------------------------------------------

library ieee;

use ieee.std_logic_1164.all;

use work.core64_type_pkg.all;

use work.pcie_core64_m1_pkg.all;

use work.core64_pb_wishbone_pkg.all;

use work.block_pe_main_pkg.all;

entity pcie_core64_wishbone_m8 is

generic

(

    Device_ID       : in std_logic_vector( 15 downto 0 ):=x"0000";  -- идентификатор модуля

    Revision        : in std_logic_vector( 15 downto 0 ):=x"0000";  -- версия модуля

    PLD_VER         : in std_logic_vector( 15 downto 0 ):=x"0000";  -- версия ПЛИС

    is_simulation   : integer:=0         --! 0 - synthesis, 1 - simulation                                  --! 0 - синтез, 1 - моделирование 

);

port

(

    ---- PCI-Express ----

    txp             : out std_logic_vector( 7 downto 0 );

    txn             : out std_logic_vector( 7 downto 0 );

    rxp             : in  std_logic_vector( 7 downto 0 );

    rxn             : in  std_logic_vector( 7 downto 0 );

    mgt250          : in  std_logic;    -- reference clock 250 MHz from PCI_Express

    perst           : in  std_logic;    -- 0 - reset

    px              : out std_logic_vector( 7 downto 0 );   --! контрольные точки 

    pcie_lstatus    : out std_logic_vector( 15 downto 0 );  -- регистр LSTATUS

    pcie_link_up    : out std_logic;                        -- 0 - завершена инициализация PCI-Express

    ---- Wishbone SYS_CON -----

    o_wb_clk        :   out std_logic;

    o_wb_rst        :   out std_logic;

    ---- Wishbone BUS -----

    ov_wbm_addr     :   out std_logic_vector(31 downto 0);

    ov_wbm_data     :   out std_logic_vector(63 downto 0);

    ov_wbm_sel      :   out std_logic_vector( 7 downto 0);

    o_wbm_we        :   out std_logic;

    o_wbm_cyc       :   out std_logic;

    o_wbm_stb       :   out std_logic;

    ov_wbm_cti      :   out std_logic_vector( 2 downto 0);  -- Cycle Type Identifier Address Tag

    ov_wbm_bte      :   out std_logic_vector( 1 downto 0);  -- Burst Type Extension Address Tag

    iv_wbm_data     :   in  std_logic_vector(63 downto 0);

    i_wbm_ack       :   in  std_logic;

    i_wbm_err       :   in  std_logic;                      -- error input - abnormal cycle termination

    i_wbm_rty       :   in  std_logic;                      -- retry input - interface is not ready

    i_wdm_irq_0     :   in  std_logic;

    iv_wbm_irq_dmar :   in  std_logic_vector( 1 downto 0)

);

end pcie_core64_wishbone_m8;

architecture pcie_core64_wishbone_m8 of pcie_core64_wishbone_m8 is

-------------------------------------------------------------------------------

--

-- BAR0 - блоки управления ----

signal  bp_host_data    : std_logic_vector( 31 downto 0 );       --! шина данных - выход 

signal  bp_data                 : std_logic_vector( 31 downto 0 );  --! шина данных - вход

signal  bp_adr                  : std_logic_vector( 19 downto 0 );       --! адрес регистра внутри блока 

signal  bp_we                   : std_logic_vector( 3 downto 0 );        --! 1 - запись в регистры 

signal  bp_rd                   : std_logic_vector( 3 downto 0 );   --! 1 - чтение из регистров блока 

signal  bp_sel                  : std_logic_vector( 1 downto 0 );        --! номер блока для чтения 

signal  bp_reg_we               : std_logic;                    --! 1 - запись в регистр по адресам   0x100000 - 0x1FFFFF 

signal  bp_reg_rd               : std_logic;                    --! 1 - чтение из регистра по адресам 0x100000 - 0x1FFFFF 

signal  bp_irq                  : std_logic;                                            --! 1 - запрос прерывания 

signal  pb_master               : type_pb_master;               --! запрос 

signal  pb_slave                : type_pb_slave;                --! ответ  

signal  pb_reset                : std_logic;

signal  brd_mode                : std_logic_vector( 15 downto 0 );

signal  bp0_data                : std_logic_vector( 31 downto 0 );

-------------------------------------------------------------------------------

--

-- Declare Global SYS_CON stuff:

signal  clk                     : std_logic;

signal  reset                   : std_logic;

signal  dcm_rst_out     : std_logic;

signal  reset_p                 : std_logic;

signal  reset_p_z1              : std_logic;

signal  reset_p_z2              : std_logic;

-------------------------------------------------------------------------------

begin

-------------------------------------------------------------------------------

--

-- Instantiate CORE64_M6 module with PB BUS:

--

CORE    :   pcie_core64_m1

generic map

(

    is_simulation   => is_simulation    --! 0 - synthesis, 1 - simulation 

)

port map

(

    ---- PCI-Express ----

    txp             => txp,

    txn             => txn,

    rxp             => rxp,

    rxn             => rxn,

    mgt250          => mgt250,

    perst           => perst,

    px              => px,

    pcie_lstatus    => pcie_lstatus,

    pcie_link_up    => pcie_link_up,

    ---- Локальная шина ----

    clk_out         => clk,  -- S6 PCIE x1 module clock output

    reset_out       => reset,     -- 

    dcm_rstp        => dcm_rst_out,   -- S6 PCIE x1 module INV trn_reset_n_c

    ---- BAR1 (PB bus) ----

    aclk            => clk,  -- !!! same clock as clk_out

    aclk_lock       => '1',             -- 

    pb_master       => pb_master,       --

    pb_slave        => pb_slave,        -- 

    ---- BAR0 (to PE_MAIN) - блоки управления ----

    bp_host_data    => bp_host_data,

    bp_data         => bp_data,

    bp_adr          => bp_adr,

    bp_we           => bp_we,

    bp_rd           => bp_rd,

    bp_sel          => bp_sel,

    bp_reg_we       => bp_reg_we,

    bp_reg_rd       => bp_reg_rd,

    bp_irq          => bp_irq

);

reset_p <= not reset;

reset_p_z1 <= reset_p    after 1 ns when rising_edge( clk );

reset_p_z2 <= reset_p_z1 after 1 ns when rising_edge( clk );

-- Deal with CORE BP Input data:

bp_data <= bp0_data when bp_sel="00" else (others=>'0');

-------------------------------------------------------------------------------

--

-- Instantiate PE_MAIN module:

--

PE_MAIN    :   block_pe_main

generic map

(

    Device_ID       => Device_ID,   -- идентификатор модуля

    Revision        => Revision,    -- версия модуля

    PLD_VER         => PLD_VER,     -- версия ПЛИС

    BLOCK_CNT       => x"0008"      -- число блоков управления 

)

port map

(

    ---- Global ----

    reset_hr1       => reset,     -- 0 - сброс

    clk             => clk,  -- Тактовая частота PCIE x1 S6

    pb_reset        => pb_reset,        -- 0 - сброс ведомой ПЛИС

    ---- HOST ----

    bl_adr          => bp_adr( 4 downto 0 ),    -- адрес

    bl_data_in      => bp_host_data,            -- данные

    bl_data_out     => bp0_data,                -- данные

    bl_data_we      => bp_we(0),                -- 1 - запись данных   

    ---- Управление ----

    brd_mode        => brd_mode                 -- регистр BRD_MODE

);

-------------------------------------------------------------------------------

--

-- Instantiate PB BUS <-> WB BUS translator module:

--

PW_WB   :   core64_pb_wishbone

port map

(

    reset           => reset_p_z2,      --! 1 - сброс

    clk             => clk,                     --! тактовая частота локальной шины 

    ---- BAR1 ----

    pb_master       => pb_master,       --! запрос 

    pb_slave        => pb_slave,        --! ответ  

    ---- Wishbone BUS -----

    ov_wbm_addr     => ov_wbm_addr,

    ov_wbm_data     => ov_wbm_data,

    ov_wbm_sel      => ov_wbm_sel,

    o_wbm_we        => o_wbm_we,

    o_wbm_cyc       => o_wbm_cyc,

    o_wbm_stb       => o_wbm_stb,

    ov_wbm_cti      => ov_wbm_cti,      -- Cycle Type Identifier Address Tag

    ov_wbm_bte      => ov_wbm_bte,      -- Burst Type Extension Address Tag

    iv_wbm_data     => iv_wbm_data,

    i_wbm_ack       => i_wbm_ack,

    i_wbm_err       => i_wbm_err,       -- error input - abnormal cycle termination

    i_wbm_rty       => i_wbm_rty,       -- retry input - interface is not ready

    i_wdm_irq_0     => i_wdm_irq_0,

    iv_wbm_irq_dmar => iv_wbm_irq_dmar

);

-------------------------------------------------------------------------------

--

-- Module Output route:

--

o_wb_clk    <= clk;  -- route from PW_WB wrk clock

--                                                

pr_o_wb_rst: process( reset_p, clk ) begin

        if( reset_p='1' ) then

                o_wb_rst <= '1' after 1 ns;

        elsif( rising_edge( clk ) ) then

                o_wb_rst <= reset_p_z2 after 1 ns;

        end if;

end process;

-------------------------------------------------------------------------------

end pcie_core64_wishbone_m8;