URL https://opencores.org/ocsvn/pcie_ds_dma/pcie_ds_dma/trunk

Subversion Repositories pcie_ds_dma

[/] [pcie_ds_dma/] [trunk/] [soft/] [linux/] [common/] [utils/] [cl_wbpex.cpp] - Blame information for rev 55

Go to most recent revision | Details | Compare with Previous | View Log


//---------------------------------------------------------------------------
#include <stdio.h>
#include <stdint.h>
 
#include        "board.h"
//#include      "brderr.h"
//#include      "ctrlstrm.h"
//#include        "ctrlreg.h"
//#include        "useful.h"
//#include      "cl_wbpex.h"
 
#ifndef __PEX_BOARD_H__
    #include "pex_board.h"
#endif
 
#ifndef __BOARD_H__
    #include "board.h"
#endif
 
#include "cl_wbpex.h"
#include "sys/select.h"
//BRD_Handle g_hBrd=0;
 
//!  Инициализация модуля
U32  CL_WBPEX::init( void )
{
    //S32 err;
    //S32 num;
 
    /*
    if( g_hBrd<=0)
    {
        BRDC_fprintf( stderr, _BRDC("\r\nМодуль не найден\r\n") );
        return 1;
    } else {
        BRDC_fprintf( stderr, _BRDC("BRD_open() - Ok\r\n") );
        BRD_getInfo(1, &info );
    }
    */
 
    board *brd = new pex_board();
    m_pBoard = brd;
 
    brd->brd_open( "/dev/pexdrv0" );
    brd->brd_init();
    brd->brd_board_info();
    //brd->brd_pld_info();
 
    // сброс прошивки ПЛИС
    return 0;
}
 
//!  Завершение работы с модулем
void  CL_WBPEX::cleanup( void )
{
    //S32 ret;
    //ret=BRD_cleanup();
 
}
 
 
 
 
// Доступ к регистрам 
 
 
 
CL_WBPEX::CL_WBPEX()
{
 
}
 
 
 
int CL_WBPEX::StreamInit( U32 strm, U32 cnt_buf, U32 size_one_buf_of_bytes, U32 trd, U32 dir, U32 cycle, U32 system, U32 agree_mode )
{
    if( strm>1 )
        return 1;
 
    DEBUG_PRINT("CL_AMBPEX::%s( cycle=%d)\n", __FUNCTION__, cycle );
 
    StreamParam *pStrm= m_streamParam+strm;
    if( pStrm->status!=0 )
        return 1;
 
    pStrm->cnt_buf                  = cnt_buf;
    pStrm->size_one_buf_of_bytes    = size_one_buf_of_bytes;
    //pStrm->trd                      = trd;
    pStrm->cycle                    = cycle;
    pStrm->system                   = system;
 
    pStrm->indexDma=-1;
    pStrm->indexPc=-1;
    pStrm->agree_mode=agree_mode;
 
    StreamDestroy( strm );
 
    __int64 size=cnt_buf*(__int64)size_one_buf_of_bytes/(1024*1024);
 
    if( system ) {
 
        BRDC_fprintf( stderr, _BRDC("Allocation memory: \r\n")
                      _BRDC(" Type of buffer:    system memory\r\n")
                      _BRDC(" Buffer size: %ld MB  (%dx%d MB)\r\n\r\n"), size, cnt_buf, size_one_buf_of_bytes/(1024*1024) );
    } else {
 
        BRDC_fprintf( stderr, _BRDC("Allocation memory: \r\n")
                      _BRDC(" Type of buffer:    userspace memory\r\n")
                      _BRDC(" Buffer size: %ld MB  (%dx%d MB)\r\n\r\n"), size, cnt_buf, size_one_buf_of_bytes/(1024*1024) );
    }
 
    BRDctrl_StreamCBufAlloc sSCA = {
        dir,
        system,
        cnt_buf,
        size_one_buf_of_bytes,
        (void**)&pStrm->pBlk[0],
        NULL,
    };
 
    u32 err = m_pBoard->dma_allocate_memory( strm, &sSCA );
    if(err != 0) {
    throw( "Error allocate stream memory\n" );
    return -1;
    }
 
    pStrm->pStub=sSCA.pStub;
    if(!pStrm->pStub) {
        throw( "Error allocate stream memory\n" );
    } else {
        printf( "Allocate stream memory - Ok\n" );
    }
    /*
    for(int j=0; j<sSCA.blkNum; j++) {
        fprintf(stderr, "%s(): pBlk[%d] = %p\n", __FUNCTION__, j, pStrm->pBlk[j]);
    }
    fprintf(stderr, "%s(): pStub = %p\n", __FUNCTION__, pStrm->pStub);
 
    fprintf(stderr, "%s(): Press enter...\n", __FUNCTION__);
    getchar();
*/
    m_pBoard->dma_set_local_addr( strm, 0x3000 );
 
    // Перевод на согласованный режим работы
    if( agree_mode ) {
 
        err = m_pBoard->dma_adjust(strm, 1);
        BRDC_fprintf( stderr, _BRDC("Stream working in adjust mode\n"));
 
    } else {
 
        BRDC_fprintf( stderr, _BRDC("Stream working in regular mode\n"));
    }
 
    m_pBoard->dma_stop(strm);
    m_pBoard->dma_reset_fifo(strm);
    m_pBoard->dma_reset_fifo(strm);
 
    pStrm->status=1;
 
    return 0;
}
 
int CL_WBPEX::StreamGetNextIndex( U32 strm, U32 index )
{
    if( strm>1 )
        return 0;
 
    DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);
 
    StreamParam *pStrm= m_streamParam+strm;
    int n=index+1;
    if( (U32)n>=pStrm->cnt_buf )
        n=0;
    return n;
 
}
 
void CL_WBPEX::StreamDestroy( U32 strm )
{
    if( strm>1 )
        return;
 
    DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);
 
    StreamParam *pStrm= m_streamParam+strm;
    if( pStrm->status==0 )
        return;
 
    StreamStop( strm );
 
    m_pBoard->dma_free_memory( strm );
 
    pStrm->status=0;
 
}
 
U32* CL_WBPEX::StreamGetBufByNum( U32 strm, U32 numBuf )
{
    if( strm>1 )
        return NULL;
 
    DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);
 
    StreamParam *pStrm= m_streamParam+strm;
    if( pStrm->status!=1 )
        return NULL;
 
    U32 *ptr;
    if( numBuf>=pStrm->cnt_buf )
        return NULL;
    ptr=(U32*)(pStrm->pBlk[numBuf]);
    return ptr;
}
 
void CL_WBPEX::StreamStart( U32 strm )
{
    if( strm>1 )
        return;
 
    DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);
 
    StreamParam *pStrm= m_streamParam+strm;
    if( pStrm->status!=1 )
        return;
 
    U32 val;
 
    //val=RegPeekInd( pStrm->trd, 0 );
    m_pBoard->dma_stop(strm);
 
 
    pStrm->indexDma=-1;
    pStrm->indexPc=-1;
 
    val=pStrm->cycle; // 0 - однократный режим, 1 - циклический
 
    m_pBoard->dma_start(strm, val);
}
 
void CL_WBPEX::StreamStop( U32 strm )
{
    if( strm>1 )
        return;
 
    DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);
 
    //StreamParam *pStrm= m_streamParam+strm;
 
    //RegPokeInd( pStrm->trd, 0, 2 );
 
    m_pBoard->dma_stop(strm);
    m_pBoard->dma_reset_fifo(strm);
 
    //RegPokeInd( pStrm->trd, 0, 0 );
 
}
 
int CL_WBPEX::StreamGetBuf( U32 strm, U32** ptr )
{
    U32 *buf;
    int ret=0;
 
    if( strm>1 )
        return 0;
 
    StreamParam *pStrm= m_streamParam+strm;
 
    DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);
 
    if( pStrm->indexPc==pStrm->indexDma )
    {
        pStrm->indexDma = StreamGetIndexDma( strm );
    }
    if( pStrm->indexPc!=pStrm->indexDma )
    {
        pStrm->indexPc=StreamGetNextIndex( strm, pStrm->indexPc );
        buf = StreamGetBufByNum( strm, pStrm->indexPc );
        *ptr = buf;
        ret=1;
        StreamGetBufDone( strm );
    }
    return ret;
}
 
int CL_WBPEX::StreamGetIndexDma( U32 strm )
{
    if( strm>1 )
        return -1;
 
    DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);
 
    StreamParam *pStrm= m_streamParam+strm;
 
    if(!pStrm->pStub) {
        //fprintf(stderr, "%s(): pStub is %p\n", __FUNCTION__, pStrm->pStub);
        return 0;
    }
 
    int lastBlock = pStrm->pStub->lastBlock;
 
    //fprintf(stderr, "%s(): lastBlock = %d\n", __FUNCTION__, lastBlock);
 
    return lastBlock;
}
 
void CL_WBPEX::StreamGetBufDone( U32 strm )
{
    DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);
 
    if( strm>1 )
        return;
 
    StreamParam *pStrm= m_streamParam+strm;
    S32 err;
    static U32 err_code=0;
 
    if( pStrm->agree_mode )
    {
        //fprintf(stderr, "%s(): Press enter to continue block %d...\n", __FUNCTION__, pStrm->indexPc);
        //getchar();
        err = m_pBoard->dma_done(strm, pStrm->indexPc);
        if(!err)
            err_code++; // Ошибка перевода в согласованный режим
    }
}
 
/*
void Sleep( int ms )
{
    struct timeval tv = {0, 0};
    tv.tv_usec = 1000*ms;
 
    select(0,NULL,NULL,NULL,&tv);
 
}
*/
 
 
 
//! Запись в регистр блока на шине WB
void CL_WBPEX::wb_block_write( U32 nb, U32 reg, U32 val )
{
    if( (nb>1) || (reg>31) )
        return;
    m_pBoard->brd_bar1_write( nb*0x2000/8+reg, val );
}
 
//! Чтение из регистра блока на шине WB
U32 CL_WBPEX::wb_block_read( U32 nb, U32 reg )
{
    U32 ret;
    if( (nb>1) || (reg>31) )
        return -1;
    ret=m_pBoard->brd_bar1_read( nb*0x2000/8+reg );
    return ret;
}
 
 

Browse

Tools

Subversion Repositories pcie_ds_dma

[/] [pcie_ds_dma/] [trunk/] [soft/] [linux/] [common/] [utils/] [cl_wbpex.cpp] - Blame information for rev 55

Line No.	Rev	Author	Line
1	20	dsmv	`//---------------------------------------------------------------------------`
2			`#include <stdio.h>`
3			`#include <stdint.h>`
4
5			`#include "board.h"`
6			`//#include "brderr.h"`
7			`//#include "ctrlstrm.h"`
8			`//#include "ctrlreg.h"`
9			`//#include "useful.h"`
10			`//#include "cl_wbpex.h"`
11
12			`#ifndef __PEX_BOARD_H__`
13			`#include "pex_board.h"`
14			`#endif`
15
16			`#ifndef __BOARD_H__`
17			`#include "board.h"`
18			`#endif`
19
20			`#include "cl_wbpex.h"`
21			`#include "sys/select.h"`
22			`//BRD_Handle g_hBrd=0;`
23
24			`//! Инициализация модуля`
25			`U32 CL_WBPEX::init( void )`
26			`{`
27			`//S32 err;`
28			`//S32 num;`
29
30			`/*`
31			`if( g_hBrd<=0)`
32			`{`
33			`BRDC_fprintf( stderr, _BRDC("\r\nМодуль не найден\r\n") );`
34			`return 1;`
35			`} else {`
36			`BRDC_fprintf( stderr, _BRDC("BRD_open() - Ok\r\n") );`
37			`BRD_getInfo(1, &info );`
38			`}`
39			`*/`
40
41			`board *brd = new pex_board();`
42			`m_pBoard = brd;`
43
44			`brd->brd_open( "/dev/pexdrv0" );`
45			`brd->brd_init();`
46			`brd->brd_board_info();`
47			`//brd->brd_pld_info();`
48
49			`// сброс прошивки ПЛИС`
50			`return 0;`
51			`}`
52
53			`//! Завершение работы с модулем`
54			`void CL_WBPEX::cleanup( void )`
55			`{`
56			`//S32 ret;`
57			`//ret=BRD_cleanup();`
58
59			`}`
60
61
62
63
64			`// Доступ к регистрам`
65
66
67
68			`CL_WBPEX::CL_WBPEX()`
69			`{`
70
71			`}`
72
73
74
75			`int CL_WBPEX::StreamInit( U32 strm, U32 cnt_buf, U32 size_one_buf_of_bytes, U32 trd, U32 dir, U32 cycle, U32 system, U32 agree_mode )`
76			`{`
77			`if( strm>1 )`
78			`return 1;`
79
80	30	dsmv	`DEBUG_PRINT("CL_AMBPEX::%s( cycle=%d)\n", __FUNCTION__, cycle );`
81	20	dsmv
82			`StreamParam *pStrm= m_streamParam+strm;`
83			`if( pStrm->status!=0 )`
84			`return 1;`
85
86			`pStrm->cnt_buf = cnt_buf;`
87			`pStrm->size_one_buf_of_bytes = size_one_buf_of_bytes;`
88			`//pStrm->trd = trd;`
89			`pStrm->cycle = cycle;`
90			`pStrm->system = system;`
91
92			`pStrm->indexDma=-1;`
93			`pStrm->indexPc=-1;`
94			`pStrm->agree_mode=agree_mode;`
95
96			`StreamDestroy( strm );`
97
98			`__int64 size=cnt_buf(__int64)size_one_buf_of_bytes/(10241024);`
99
100			`if( system ) {`
101
102			`BRDC_fprintf( stderr, _BRDC("Allocation memory: \r\n")`
103	41	dsmv	`_BRDC(" Type of buffer: system memory\r\n")`
104	54	v.karak	`_BRDC(" Buffer size: %ld MB (%dx%d MB)\r\n\r\n"), size, cnt_buf, size_one_buf_of_bytes/(1024*1024) );`
105	20	dsmv	`} else {`
106
107			`BRDC_fprintf( stderr, _BRDC("Allocation memory: \r\n")`
108	41	dsmv	`_BRDC(" Type of buffer: userspace memory\r\n")`
109	54	v.karak	`_BRDC(" Buffer size: %ld MB (%dx%d MB)\r\n\r\n"), size, cnt_buf, size_one_buf_of_bytes/(1024*1024) );`
110	20	dsmv	`}`
111
112			`BRDctrl_StreamCBufAlloc sSCA = {`
113			`dir,`
114			`system,`
115			`cnt_buf,`
116			`size_one_buf_of_bytes,`
117			`(void**)&pStrm->pBlk[0],`
118			`NULL,`
119			`};`
120
121	54	v.karak	`u32 err = m_pBoard->dma_allocate_memory( strm, &sSCA );`
122	20	dsmv	`if(err != 0) {`
123			`throw( "Error allocate stream memory\n" );`
124			`return -1;`
125			`}`
126
127			`pStrm->pStub=sSCA.pStub;`
128			`if(!pStrm->pStub) {`
129			`throw( "Error allocate stream memory\n" );`
130			`} else {`
131			`printf( "Allocate stream memory - Ok\n" );`
132			`}`
133			`/*`
134			`for(int j=0; j<sSCA.blkNum; j++) {`
135			`fprintf(stderr, "%s(): pBlk[%d] = %p\n", __FUNCTION__, j, pStrm->pBlk[j]);`
136			`}`
137			`fprintf(stderr, "%s(): pStub = %p\n", __FUNCTION__, pStrm->pStub);`
138
139			`fprintf(stderr, "%s(): Press enter...\n", __FUNCTION__);`
140			`getchar();`
141			`*/`
142			`m_pBoard->dma_set_local_addr( strm, 0x3000 );`
143
144			`// Перевод на согласованный режим работы`
145			`if( agree_mode ) {`
146
147			`err = m_pBoard->dma_adjust(strm, 1);`
148			`BRDC_fprintf( stderr, _BRDC("Stream working in adjust mode\n"));`
149
150			`} else {`
151
152			`BRDC_fprintf( stderr, _BRDC("Stream working in regular mode\n"));`
153			`}`
154
155			`m_pBoard->dma_stop(strm);`
156			`m_pBoard->dma_reset_fifo(strm);`
157			`m_pBoard->dma_reset_fifo(strm);`
158
159			`pStrm->status=1;`
160
161			`return 0;`
162			`}`
163
164			`int CL_WBPEX::StreamGetNextIndex( U32 strm, U32 index )`
165			`{`
166			`if( strm>1 )`
167			`return 0;`
168
169			`DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);`
170
171			`StreamParam *pStrm= m_streamParam+strm;`
172			`int n=index+1;`
173			`if( (U32)n>=pStrm->cnt_buf )`
174			`n=0;`
175			`return n;`
176
177			`}`
178
179			`void CL_WBPEX::StreamDestroy( U32 strm )`
180			`{`
181			`if( strm>1 )`
182			`return;`
183
184			`DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);`
185
186			`StreamParam *pStrm= m_streamParam+strm;`
187			`if( pStrm->status==0 )`
188			`return;`
189
190			`StreamStop( strm );`
191
192			`m_pBoard->dma_free_memory( strm );`
193
194			`pStrm->status=0;`
195
196			`}`
197
198			`U32* CL_WBPEX::StreamGetBufByNum( U32 strm, U32 numBuf )`
199			`{`
200			`if( strm>1 )`
201			`return NULL;`
202
203			`DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);`
204
205			`StreamParam *pStrm= m_streamParam+strm;`
206			`if( pStrm->status!=1 )`
207			`return NULL;`
208
209			`U32 *ptr;`
210			`if( numBuf>=pStrm->cnt_buf )`
211			`return NULL;`
212			`ptr=(U32*)(pStrm->pBlk[numBuf]);`
213			`return ptr;`
214			`}`
215
216			`void CL_WBPEX::StreamStart( U32 strm )`
217			`{`
218			`if( strm>1 )`
219			`return;`
220
221			`DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);`
222
223			`StreamParam *pStrm= m_streamParam+strm;`
224			`if( pStrm->status!=1 )`
225			`return;`
226
227			`U32 val;`
228
229			`//val=RegPeekInd( pStrm->trd, 0 );`
230			`m_pBoard->dma_stop(strm);`
231
232
233			`pStrm->indexDma=-1;`
234			`pStrm->indexPc=-1;`
235
236			`val=pStrm->cycle; // 0 - однократный режим, 1 - циклический`
237
238			`m_pBoard->dma_start(strm, val);`
239			`}`
240
241			`void CL_WBPEX::StreamStop( U32 strm )`
242			`{`
243			`if( strm>1 )`
244			`return;`
245
246			`DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);`
247
248	54	v.karak	`//StreamParam *pStrm= m_streamParam+strm;`
249	20	dsmv
250			`//RegPokeInd( pStrm->trd, 0, 2 );`
251
252			`m_pBoard->dma_stop(strm);`
253			`m_pBoard->dma_reset_fifo(strm);`
254
255			`//RegPokeInd( pStrm->trd, 0, 0 );`
256
257			`}`
258
259			`int CL_WBPEX::StreamGetBuf( U32 strm, U32** ptr )`
260			`{`
261			`U32 *buf;`
262			`int ret=0;`
263
264			`if( strm>1 )`
265			`return 0;`
266
267			`StreamParam *pStrm= m_streamParam+strm;`
268
269			`DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);`
270
271			`if( pStrm->indexPc==pStrm->indexDma )`
272			`{`
273			`pStrm->indexDma = StreamGetIndexDma( strm );`
274			`}`
275			`if( pStrm->indexPc!=pStrm->indexDma )`
276			`{`
277			`pStrm->indexPc=StreamGetNextIndex( strm, pStrm->indexPc );`
278			`buf = StreamGetBufByNum( strm, pStrm->indexPc );`
279			`*ptr = buf;`
280			`ret=1;`
281			`StreamGetBufDone( strm );`
282			`}`
283			`return ret;`
284			`}`
285
286			`int CL_WBPEX::StreamGetIndexDma( U32 strm )`
287			`{`
288			`if( strm>1 )`
289			`return -1;`
290
291			`DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);`
292
293			`StreamParam *pStrm= m_streamParam+strm;`
294
295			`if(!pStrm->pStub) {`
296			`//fprintf(stderr, "%s(): pStub is %p\n", __FUNCTION__, pStrm->pStub);`
297			`return 0;`
298			`}`
299
300			`int lastBlock = pStrm->pStub->lastBlock;`
301
302			`//fprintf(stderr, "%s(): lastBlock = %d\n", __FUNCTION__, lastBlock);`
303
304			`return lastBlock;`
305			`}`
306
307			`void CL_WBPEX::StreamGetBufDone( U32 strm )`
308			`{`
309			`DEBUG_PRINT("CL_AMBPEX::%s()\n", __FUNCTION__);`
310
311			`if( strm>1 )`
312			`return;`
313
314			`StreamParam *pStrm= m_streamParam+strm;`
315			`S32 err;`
316			`static U32 err_code=0;`
317
318			`if( pStrm->agree_mode )`
319			`{`
320			`//fprintf(stderr, "%s(): Press enter to continue block %d...\n", __FUNCTION__, pStrm->indexPc);`
321			`//getchar();`
322			`err = m_pBoard->dma_done(strm, pStrm->indexPc);`
323			`if(!err)`
324			`err_code++; // Ошибка перевода в согласованный режим`
325			`}`
326			`}`
327
328			`/*`
329			`void Sleep( int ms )`
330			`{`
331			`struct timeval tv = {0, 0};`
332			`tv.tv_usec = 1000*ms;`
333
334			`select(0,NULL,NULL,NULL,&tv);`
335
336			`}`
337			`*/`
338
339
340
341			`//! Запись в регистр блока на шине WB`
342			`void CL_WBPEX::wb_block_write( U32 nb, U32 reg, U32 val )`
343			`{`
344			`if( (nb>1) \|\| (reg>31) )`
345			`return;`
346			`m_pBoard->brd_bar1_write( nb*0x2000/8+reg, val );`
347			`}`
348
349			`//! Чтение из регистра блока на шине WB`
350			`U32 CL_WBPEX::wb_block_read( U32 nb, U32 reg )`
351			`{`
352			`U32 ret;`
353			`if( (nb>1) \|\| (reg>31) )`
354			`return -1;`
355			`ret=m_pBoard->brd_bar1_read( nb*0x2000/8+reg );`
356			`return ret;`
357			`}`
358
359