Subversion Repositories phr

%% This is the University of Calgary Thesis Class file ``ucalgthes.cls''

%% [1998/03/01] -- N. Mancell, UCS].

%% for use with LaTeX2e[1996/12/01]

%

%%% MODIFICATIONS

%%  Modified thesis.sty to ucalgthes.cls

%%  Changes for LaTeX2e compatibility, font selection and options selection.

%%  No new style modifications were done.

%%%HISTORICAL LOCAL MODIFICATIONS - REPORT STYLE TO THESIS.STY"

%% THESIS DOCUMENT STYLE -- Released January 1987

%    for LaTeX version 2.09

% Copyright (C) 1985 by Leslie Lamport

% Modified from Report Style by Deborah Teale January 1987

% Modified (March 1988) to clear marks in the CONTENTS and INDEX

% Modified (May 1988) to add newsigncolumn command for multiple signature

%                     columns on the signing page

% Modified (Sep 1992) to remove date on approval page, add table of contents

%                     to toc and add defs Author Degree thesis

%                     default \thesis is thesis rather than dissertation

%\typeout{Document Style 'thesis'.  Released May 1988}

%\typeout{Document Style 'thesis'. Released Sep 1992}

%

%%% IDENTIFICATION

\NeedsTeXFormat{LaTeX2e}[1996/12/01]

\ProvidesClass{ucalgthes1}[1998/03/01 v1.0 University of Calgary Thesis Class]

%\RequirePackage{setspace}[200/12/01] %(NM2005) replacing old doublespace.sty %singlespace,onehalfspace and doublespacing options. (nm2007 commented out)%

%%% DECLARATION OF OPTIONS

%  The type size option is handled by reading a different (THESxx.CLO)

%  file for each  size, as follows, to define font size-specific commands:

%       10pt : THES10, 11pt : THES11, 12pt : THES12

%  Defaults are set to 12pt, onside, final (98/03/01)NM

%

\newcommand\@ptsize{}

\newcommand\@draftmark{}

\newcommand\@includeprompt{}

\newcommand\@chapterprompt{}

%

%% Font Size Options (nm1998/03/01)

\DeclareOption{10pt}{\renewcommand\@ptsize{0}}

\DeclareOption{11pt}{\renewcommand\@ptsize{1}} %11pt option reads THES11.CLO

\DeclareOption{12pt}{\renewcommand\@ptsize{2}} %12pt option reads THES12.CLO

%

%%  Two-side or one-side Printing Option (nm1998/03/01).

\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}

\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue}

%

%%  Draft Option (nm1998/03/01)

\DeclareOption{draft}{\renewcommand\@draftmark{1}}

\DeclareOption{final}{\renewcommand\@draftmark{2}}

%

%%  Includeprompt Option(prompt user for includeonly files)(nm1998/03/01)

\DeclareOption{includeprompt}{\renewcommand\@includeprompt{\typein[\includefiles]{Type includeonly filenames {f1,f2,f3}}

\includeonly{\includefiles}}}

%

%%  Chapterprompt Option(prompts user for chapter number and filename)

%%  (nm1998/03/01)

\DeclareOption{chapterprompt}{\renewcommand\chapterprompt{\typein[\chapterfilename]{Type chapter filename }%

\typein[\chapternumber\{Type chapter number }%

\def\chapterprompt{\setcounter{chapter}{\chapternumber}%

\addtocounter{chapter}{-1}%

\include{chapterfilename}}}

%

%%% EXECUTE OPTIONS

\ExecuteOptions{letterpaper,12pt,oneside,final} %(NM2005 added letterpaper)Defaults to 12pt type size, oneside,final

%  Draft Option - options gets implemented

%

% \overfullrule = 0pt             % Default is don't mark overfull hboxes.

\ifnum \@draftmark = 1

\overfullrule 5pt  % Causes overfull hboxes to be marked.

\fi

% The \ProcessOptions command causes the execution of every command FOO

% which is declared and for which the user typed the FOO option in his

% \documentclass command.  For every undeclared option BAR there will be

% a warning message. (nm98/03/01)

\ProcessOptions

%\input setspace.sty %(NM 2005 setspace.sty replacing doublespace.sty)(nm 2007 commented out)

\input doublespace.sty %(nm 2007 re-instated)

\input thes1\@ptsize.clo\relax

%    ****************************************

%    *                LISTS                 *

%    ****************************************

%

% ENUMERATE

%  Enumeration is done with four counters: enumi, enumii, enumiii

%  and enumiv, where enumN controls the numbering of the Nth level

%  enumeration.  The label is generated by the commands \labelenumi

%  ... \labelenumiv.  The expansion of \p@enumN\theenumN defines the

%  output of a \ref command.

\def\labelenumi{\arabic{enumi}.}

\def\theenumi{\arabic{enumi}}

\def\labelenumii{(\alph{enumii})}

\def\theenumii{\alph{enumii}}

\def\p@enumii{\theenumi}

\def\labelenumiii{\roman{enumiii}.}

\def\theenumiii{\roman{enumiii}}

\def\p@enumiii{\theenumi(\theenumii)}

\def\labelenumiv{\Alph{enumiv}.}

\def\theenumiv{\Alph{enumiv}}

\def\p@enumiv{\p@enumiii\theenumiii}

% ITEMIZE

% Itemization is controlled by four commands: \labelitemi, \labelitemii,

% \labelitemiii, and \labelitemiv, which define the labels of the various

% itemization levels.(\bf to \bfseries, \bullet \m@ath\bullet, etc.

%  nm1998/03/01)

\def\labelitemi{$\m@th\bullet$}

\def\labelitemii{\bfseries --}

\def\labelitemiii{$\m@th\ast$}

\def\labelitemiv{$\m@th\cdot$}

% VERSE

%   The verse environment is defined by making clever use of the

%   list environment's parameters.  The user types \\ to end a line.

%   This is implemented by \let'in \\ equal \@centercr.

%

\def\verse{\let\\=\@centercr

  \list{}{\itemsep\z@ \itemindent -1.5em\listparindent \itemindent

          \rightmargin\leftmargin\advance\leftmargin 1.5em}\item[]}

\let\endverse\endlist

% QUOTATION

%   Fills lines

%   Indents paragraph

%

\def\quotation{\list{}{\listparindent 1.5em

    \itemindent\listparindent

    \rightmargin\leftmargin\parsep 0pt plus 1pt}\item[]}

\let\endquotation=\endlist

% QUOTE -- same as quotation except no paragraph indentation,

%

\def\quote{\list{}{\rightmargin\leftmargin}\item[]}

\let\endquote=\endlist

% DESCRIPTION

%

%  To change the formatting of the label, you must redefine

%  \descriptionlabel.

\def\descriptionlabel#1{\hspace\labelsep \bfseries #1}

\def\description{\list{}{\labelwidth\z@ \itemindent-\leftmargin

       \let\makelabel\descriptionlabel}}

\let\enddescription\endlist

\newdimen\descriptionmargin

\descriptionmargin=3em

%    ****************************************

%    *         OTHER ENVIRONMENTS           *

%    ****************************************

%

%

% THEOREM

% \@begintheorem ... \@endtheorem are the commands executed at the

% beginning and end of a (user-defined) theorem-like environment.

% Except \@opargbegintheorem is executed when an optional argument is

% given.  Cf. LATEX.TEX.

%

% \def\@begintheorem#1#2{\it \trivlist \item[\hskip \labelsep{\bfseries #1\ #2}]}

% \def\@opargbegintheorem#1#2#3{\it \trivlist

%       \item[\hskip \labelsep{\bfseries #1\ #2\ (#3)}]}

% \def\@endtheorem{\endtrivlist}

% TITLEPAGE

%  In the normal environments, the titlepage environment does nothing but

%  start and end a page, and inhibit page numbers.  It also resets the

%  page number to zero.  In two-column style, it still makes a one-column

%  page.

\def\titlepage{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn

     \else \newpage \fi \thispagestyle{empty}\c@page\z@}

\def\endtitlepage{\if@restonecol\twocolumn \else \newpage \fi}

% Variables for the thesis title page

\def\dept#1{\gdef\@dept{#1}}

\def\degree#1{\gdef\@degree{#1}\gdef\Degree{#1}}

\def\monthname#1{\gdef\@monthname{#1}}

%\def\year#1{\gdef\@year{#1}} %(NM2005 interferred with latex year command for fancyhdr)

      \def\thesisyear#1{\gdef\@year{#1}} % redefined as per above comment (NM2005)

\def\thesis#1{\gdef\Thesis{#1}\gdef\@THESIS{\uppercase{#1}}}

\def\author#1{\gdef\@author{#1}\gdef\Author{#1}}

% SIGNINGPAGE

% environment signing and command signline

\newlength{\signwidth}

\newenvironment{signing}[1]{\settowidth{\signwidth}{#1} %     %width of longest signature

\def\signline{ \null\vskip 1em\makebox[\signwidth]{\hrulefill}\\}       %signature line

\def\newsigncolumn{\end{minipage}\hfill\begin{minipage}[t]{\signwidth}\raggedleft}% added raggedleft 2009nm allow for more than one column of signatures

\singlespace

\noindent\begin{minipage}{\textwidth}

\raggedleft

\null

\begin{minipage}[t]{\signwidth} \raggedleft %added raggedleft 2009nm

}{\null\end{minipage}\end{minipage}

\null

\par

\vfill

\begin{flushright}

\noindent  \rule{2.5in}{.01in}\null

\\

\noindent Date

\end{flushright}

\endsinglespace}

% ARRAY AND TABULAR

%

\arraycolsep 5pt     % Half the space between columns in an array environment.

\tabcolsep 6pt       % Half the space between columns in a tabular environment.

\arrayrulewidth .4pt % Width of rules in array and tabular environment.

\doublerulesep 2pt   % Space between adjacent rules in array or tabular env.

% TABBING

%

\tabbingsep \labelsep   % Space used by the \' command.  (See LaTeX manual.)

% MINIPAGE

%  \@minipagerestore is called upon entry to a minipage environment to

%  set up things that are to be handled differently inside a minipage

%  environment. In the current styles, it does nothing.

%

% \skip\@mpfootins : plays same role for footnotes in a minipage as

%                    \skip\footins does for ordinary footnotes

\skip\@mpfootins = \skip\footins

% FRAMEBOX

%

\fboxsep = 3pt    % Space left between box and text by \fbox and \framebox.

\fboxrule = .4pt  % Width of rules in box made by \fbox and \framebox.

%    ****************************************

%    *        CHAPTERS AND SECTIONS         *

%    ****************************************

%

% DEFINE COUNTERS:

%

% \newcounter{NEWCTR}[OLDCTR] : Defines NEWCTR to be a counter, which is

%                               reset to zero when counter OLDCTR is stepped.

%                               Counter OLDCTR must already be defined.

\newcounter{part}

\newcounter {chapter}

\newcounter {section}[chapter]

\newcounter {subsection}[section]

\newcounter {subsubsection}[subsection]

\newcounter {paragraph}[subsubsection]

\newcounter {subparagraph}[paragraph]

% For any counter CTR, \theCTR is a macro that defines the printed version

% of counter CTR.  It is defined in terms of the following macros:

%

%  \arabic{COUNTER} : The value of COUNTER printed as an arabic numeral.

%  \roman{COUNTER}  : Its value printed as a lower-case roman numberal.

%  \Roman{COUNTER}  : Its value printed as an upper-case roman numberal.

%  \alph{COUNTER}   : Value of COUNTER printed as a lower-case letter:

%                         1 = a, 2 = b, etc.

%  \Alph{COUNTER}   : Value of COUNTER printed as an upper-case letter:

%                           1 = A, 2 = B, etc.

%

\def\thepart          {\Roman{part}}

\def\thechapter       {\arabic{chapter}}

\def\thesection       {\thechapter.\arabic{section}}

\def\thesubsection    {\thesection.\arabic{subsection}}

\def\thesubsubsection {\thesubsection .\arabic{subsubsection}}

\def\theparagraph     {\thesubsubsection.\arabic{paragraph}}

\def\thesubparagraph  {\theparagraph.\arabic{subparagraph}}

% \@chapapp is initially defined to be 'Chapter'.  The \appendix

% command redefines it to be 'Appendix'.

%

\def\@chapapp{Chapter}

%    ****************************************

%    *         TABLE OF CONTENTS, ETC.      *

%    ****************************************

%

% A \subsection command writes a

%       \contentsline{subsection}{TITLE}{PAGE}

% command on the .toc file, where TITLE contains the contents of the

% entry and PAGE is the page number.  If subsections are being numbered,

% then TITLE will be of the form

%       \numberline{NUM}{HEADING}

% where NUM is the number produced by \thesubsection.  Other sectioning

% commands work similarly.

%

% A \caption command in a 'figure' environment writes

%    \contentsline{figure}{\numberline{NUM}{CAPTION}}{PAGE}

% on the .lof file, where NUM is the number produced by \thefigure and

% CAPTION is the figure caption.  It works similarly for a 'table' environment.

%

% The command \contentsline{NAME} expands to \l@NAME.  So, to specify

% the table of contents, we must define \l@chapter, \l@section,

% \l@subsection, ... ; to specify the list of figures, we must define

% \l@figure; and so on.  Most of these can be defined with the

% \@dottedtocline command, which works as follows.

%

% \@dottedtocline{LEVEL}{INDENT}{NUMWIDTH}{TITLE}{PAGE}

%    LEVEL    : An entry is produced only if LEVEL < or = value of

%               'tocdepth' counter.  Note, \chapter is level 0, \section

%               is level 1, etc.

%    INDENT   : The indentation from the outer left margin of the start of

%               the contents line.

%    NUMWIDTH : The width of a box in which the section number is to go,

%               if TITLE includes a \numberline command.

%

% This command uses the following three parameters, which are set

% with a \def (so em's can be used to make them depend upon the font).

%   \@pnumwidth : The width of a box in which the page number is put.

%   \@tocrmarg  : The right margin for multiple line entries.  One

%                 wants \@tocrmarg > or = \@pnumwidth

%   \@dotsep    : Separation between dots, in mu units.  Should be \def'd to

%                 a number like 2 or 1.7

\def\@pnumwidth{1.55em}

\def\@tocrmarg {2.55em}

\def\@dotsep{4.5}

\setcounter{tocdepth}{2}

% TABLEOFCONTENTS

%  In thesis class, \tableofcontents, \listoffigures, etc. are always

%  set in single-column style.  @restonecol

\def\tableofcontents{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn

  \fi\chapter*{\bf Table of Contents\@mkboth{}{}\addcontentsline{toc}{chapter}{Table of Contents}}

 \@starttoc{toc}\if@restonecol\twocolumn\fi} %added \bf to print Table of Contents in bold on pg 2006nm

\def\l@part#1#2{\addpenalty{-\@highpenalty}

   \addvspace{2.25em plus 1pt}  % space above part line

   \begingroup

   \@tempdima 3em         % width of box holding part number, used by

     \parindent \z@ \rightskip \@pnumwidth             %% \numberline

     \parfillskip -\@pnumwidth

     {%\large \bfseries          % set line in \large boldface 2006nm

     \leavevmode          % TeX command to enter horizontal mode.

     #1\hfil \hbox to\@pnumwidth{\hss #2}}\par

     \nobreak             % Never break after part entry

   \endgroup}

\def\l@chapter#1#2{\pagebreak[3]

   \vskip 1.0em plus 1pt  % space above chapter line

   \@tempdima 1.5em       % width of box holding chapter number

   \begingroup

     \parindent \z@ \rightskip \@pnumwidth

     \parfillskip -\@pnumwidth

     %\bfseries                  % Boldface removed. 2006nm

     \leavevmode          % TeX command to enter horizontal mode.

     #1\hfil \hbox to\@pnumwidth{\hss #2}\par

   \endgroup}

\def\l@chapter{\@dottedtocline{0}{1.5em}{2.3em}}  %added this line 2006nm

\def\l@section{\@dottedtocline{1}{1.5em}{2.3em}} %changed 1 to 0 2006nm

\def\l@subsection{\@dottedtocline{2}{3.8em}{3.2em}}

\def\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}}

\def\l@paragraph{\@dottedtocline{4}{10em}{5em}}

\def\l@subparagraph{\@dottedtocline{5}{12em}{6em}}

% LIST OF FIGURES

%

\def\listoffigures{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn

  \fi\chapter*{List of Figures\markboth

   {}{}\addcontentsline{toc}{chapter}{List of Figures}}%(NM 2005 added List of Figures to TOC)

   \@starttoc{lof}\if@restonecol\twocolumn

  \fi}

\def\l@figure{\@dottedtocline{1}{1.5em}{2.3em}}

% LIST OF TABLES

%

\def\listoftables{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn

  \fi\chapter*{List of Tables\markboth

   {}{}\addcontentsline{toc}{chapter}{List of Tables}}%(NM 2005 added List of Tables to TOC)

   \@starttoc{lot}\if@restonecol\twocolumn

  \fi}

\let\l@table\l@figure

%    ****************************************

%    *             BIBLIOGRAPHY             *

%    ****************************************

%

% The thebibliography environment executes the following commands:

%

%  \def\newblock{\hskip .11em plus .33em minus -.07em} --

%      Defines the `closed' format, where the blocks (major units of

%      information) of an entry run together.

%

%  \sloppy  -- Used because it's rather hard to do line breaks in

%      bibliographies,

%

%  \sfcode`\.=1000\relax --

%      Causes a `.' (period) not toproduce an end-of-sentence space.

\def\thebibliography#1{\altchapter{Bibliography}\list

  {[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth

    \advance\leftmargin\labelsep

    \usecounter{enumi}}

    \def\newblock{\hskip .11em plus .33em minus -.07em}

    \sloppy

    \sfcode`\.=1000\relax}

\let\endthebibliography=\endlist

% \def\@biblabel#1{[#1]\hfill}  % Produces the label for a \bibitem[...]

                                % command.

% \def\@cite#1{[#1]}            % Produces the output of the \cite command.

%    ****************************************

%    *              THE INDEX               *

%    ****************************************

%

% THE THEINDEX ENVIRONMENT

% Produces double column format, with each paragraph a separate entry.

% The user commands \item, \subitem and \subsubitem are used to

% produce the entries, and \indexspace adds an extra vertical space

% that's the right size to put above the first entry with a new letter

% of the alphabet.

\newif\if@restonecol

\def\theindex{\@restonecoltrue\if@twocolumn\@restonecolfalse\fi

\columnseprule \z@

\columnsep 35pt\twocolumn[\@makeschapterhead{Index}]

    \markboth{}{}\thispagestyle{plain}\parindent\z@

    \parskip\z@ plus .3pt\relax\let\item\@idxitem}

\def\@idxitem{\par\hangindent 40pt}

\def\subitem{\par\hangindent 40pt \hspace*{20pt}}

\def\subsubitem{\par\hangindent 40pt \hspace*{30pt}}

\def\endtheindex{\if@restonecol\onecolumn\else\clearpage\fi}

\def\indexspace{\par \vskip 10pt plus 5pt minus 3pt\relax}

%    ****************************************

%    *             FOOTNOTES                *

%    ****************************************

%

% \footnoterule is a macro to draw the rule separating the footnotes from

% the text.  It should take zero vertical space, so it needs a negative

% skip to compensate for any positive space taken by the rule.  (See

% PLAIN.TEX.)

\def\footnoterule{\kern-3\p@

  \hrule width .4\columnwidth

  \kern 2.6\p@}                 % The \hrule has default height of .4pt .

% \newcounter{footnote}

\@addtoreset{footnote}{chapter}  % Numbers footnotes within chapters

%   \@makefntext{NOTE} :

%        Must produce the actual footnote, using \@thefnmark as the mark

%        of the footnote and NOTE as the text.  It is called when effectively

%        inside a \parbox of width \columnwidth (i.e., with \hsize =

%        \columnwidth).

%

%        The following macro indents all lines of the footnote by 10pt, and

%        indents the first line of a new paragraph by 1em.  To change these

%        dimensions, just substitute the desired value for '10pt' [in both

%        places] or '1em'.  The mark is flushright against the footnote.

%          \long\def\@makefntext#1{\@setpar{\@@par\@tempdima \hsize

%             \advance\@tempdima-10pt\parshape \@ne 10pt \@tempdima}\par

%             \parindent 1em\noindent \hbox to \z@{\hss$^{\@thefnmark}$}#1}

%

%        A simpler macro is used, in which the footnote text is

%        set like an ordinary text paragraph, with no indentation except

%        on the first line of a paragraph, and the first line of the

%        footnote.  Thus, all the macro must do is set \parindent

%        to the appropriate value for succeeding paragraphs and put the

%        proper indentation before mark.

\long\def\@makefntext#1{\parindent 1em\noindent

            \hbox to 1.8em{\hss$^{\@thefnmark}$}#1}

% \@makefnmark : A macro to generate the footnote marker that goes

%    in the text.  Default used.

%

%    ****************************************

%    *         FIGURES AND TABLES           *

%    ****************************************

%

% Float placement parameters.  See LaTeX manual for their definition.

%

\setcounter{topnumber}{2}

\def\topfraction{.7}

\setcounter{bottomnumber}{1}

\def\bottomfraction{.3}

\setcounter{totalnumber}{3}

\def\textfraction{.2}

\def\floatpagefraction{.5}

\setcounter{dbltopnumber}{2}

\def\dbltopfraction{.7}

\def\dblfloatpagefraction{.5}

% \@makecaption{NUMBER}{TEXT} : Macro to make a figure or table caption.

%      NUMBER : Figure or table number--e.g., 'Figure 3.2'

%      TEXT   : The caption text.

%  Macro should be called inside a \parbox of right width, with \normalsize.

\long\def\@makecaption#1#2{

   \vskip 10pt

   \setbox\@tempboxa\hbox{#1: #2}

   \ifdim \wd\@tempboxa >\hsize   % IF longer than one line:

       \unhbox\@tempboxa\par      %   THEN set as ordinary paragraph.

     \else                        %   ELSE  center.

       \hbox to\hsize{\hfil\box\@tempboxa\hfil}

   \fi}

% To define a float of type TYPE (e.g., TYPE = figure), the document style

% must define the following.

%

%  \fps@TYPE   : The default placement specifier for floats of type TYPE.

%

%  \ftype@TYPE : The type number for floats of type TYPE.  Each TYPE has

%                associated a unique positive TYPE NUMBER, which is a power

%                of two.  E.g., figures might have type number 1, tables type

%                number 2, programs type number 4, etc.

%

%  \ext@TYPE   : The file extension indicating the file on which the

%                contents list for float type TYPE is stored.  For example,

%                \ext@figure = 'lof'.

%

%  \fnum@TYPE  : A macro to generate the figure number for a caption.

%                For example, \fnum@TYPE == Figure \thefigure.

%

%  The actual float-making environment commands--e.g., the commands

%  \figure and \endfigure--are defined in terms of the macros \@float

%  and \end@float, which are described below.

%

%  \@float{TYPE}[PLACEMENT] : Macro to begin a float environment for a

%     single-column float of type TYPE with PLACEMENT as the placement

%     specifier.  The default value of PLACEMENT is defined by \fps@TYPE.

%     The environment is ended by \end@float.

%     E.g., \figure == \@float{figure}, \endfigure == \end@float.

% FIGURE

\newcounter{figure}[chapter]

\def\thefigure{\thechapter.\@arabic\c@figure}

\def\fps@figure{tbp}

\def\ftype@figure{1}

\def\ext@figure{lof}

\def\fnum@figure{Figure \thefigure}

\def\figure{\@float{figure}}

\let\endfigure\end@float

\@namedef{figure*}{\@dblfloat{figure}}

\@namedef{endfigure*}{\end@dblfloat}

% TABLE

%

\newcounter{table}[chapter]

\def\thetable{\thechapter.\@arabic\c@table}

\def\fps@table{tbp}

\def\ftype@table{2}

\def\ext@table{lot}

\def\fnum@table{Table \thetable}

\def\table{\@float{table}}

\let\endtable\end@float

\@namedef{table*}{\@dblfloat{table}}

\@namedef{endtable*}{\end@dblfloat}

%    ****************************************

%    *         TITLE AND ABSTRACT           *

%    ****************************************

%

%

% Uses same title and abstract format as the article style's

% Uses thesistitlepage option

% titlepage option.

\input thesistitlepage.sty

%    ****************************************

%    *            PAGE STYLES               *

%    ****************************************

%

% The page style 'foo' is defined by defining the command \ps@foo.  This

% command should make only local definitions.  There should be no stray

% spaces in the definition, since they could lead to mysterious extra

% spaces in the output.

%

% The \ps@... command defines the macros \@oddhead, \@oddfoot,

% \@evenhead, and \@evenfoot to define the running heads and

% feet---e.g., \@oddhead is the macro to produce the contents of the

% heading box for odd-numbered pages.  It is called inside an \hbox of

% width \textwidth.

%

% To make headings determined by the sectioning commands, the page style

% defines the commands \chaptermark, \sectionmark, ... , where

% \chaptermark{TEXT} is called by \chapter to set a mark, and so on.

% The \...mark commands and the \...head macros are defined with the

% help of the following macros.  (All the \...mark commands should be

% initialized to no-ops.)

%

% MARKING CONVENTIONS:

% LaTeX extends TeX's \mark facility by producing two kinds of marks

% a 'left' and a 'right' mark, using the following commands:

%     \markboth{LEFT}{RIGHT} : Adds both marks.

%     \markright{RIGHT}      : Adds a 'right' mark.

%     \leftmark  : Used in the \@oddhead, \@oddfoot, \@evenhead or \@evenfoot

%                  macro, gets the current 'left'  mark.  Works like TeX's

%                  \botmark command.

%     \rightmark : Used in the \@oddhead, \@oddfoot, \@evenhead or \@evenfoot

%                  macro, gets the current 'right'  mark.  Works like TeX's

%                  \firstmark command.

% The marking commands work reasonably well for right marks 'numbered

% within' left marks--e.g., the left mark is changed by a \chapter command and

% the right mark is changed by a \section command.  However, it does

% produce somewhat anomalous results if two \bothmark's occur on the same page.

%

%% (98/03/01) - NM Changed \rm and \sl to \rmfamily and \slshape. Removed

%%              \hbox{} also.

%

\mark{{}{}}   % Initializes TeX's marks

% \def\ps@empty{\def\@oddhead{}

%   \def\@oddfoot{}

%   \def\@evenhead{}\def\@evenfoot{}}

%

% \def\ps@plain{\def\@oddhead{}

%   \def\@oddfoot{\rmfamily\hfil\thepage\hfil}

%   \def\@evenhead{}

%   \let\@evenfoot\@oddfoot}

% Definition of 'headings' page style

%  Note the use of ##1 for parameter of \def\chaptermark inside the

%  \def\ps@headings.

%

%\if@twoside         % If two-sided printing.

%\def\ps@headings{\def\@oddfoot{}\def\@evenfoot{}%       No feet.

%\def\@evenhead{\rmfamily \thepage\hfil \slshape \leftmark}%   Left heading.

%\def\@oddhead{{\slshape \rightmark}\hfil \rmfamily\thepage}% Right heading.

%\def\chaptermark##1{\markboth {\uppercase{\ifnum \c@secnumdepth >\m@ne

%     \@chapapp\ \thechapter. \ \fi ##1}}{}}%

%\def\sectionmark##1{\markright {\uppercase{\ifnum \c@secnumdepth >\z@

%   \thesection. \ \fi ##1}}}}

%\else               % If one-sided printing.

%\def\ps@headings{\def\@oddfoot{}\def\@evenfoot{}%     No feet.%2009m,

%\def\@oddhead{{\slshape \rightmark} \hfil \rmfamily\thepage}% Heading.%2009nm

%\def\chaptermark##1{\markright {\uppercase{\ifnum \c@secnumdepth >\m@ne%2009nm

%  \@chapapp\ \thechapter. \ \fi ##1}}}}%2009nm

%\fi%2009nm

% Definition of 'myheadings' page style.

%

%\def\ps@myheadings{\def\@oddhead{{\slshape\rightmark} \hfil \rmfamily\thepage}%

%\def\@oddfoot{}\def\@evenhead{\rmfamily \thepage\hfil\slshape\leftmark}%

%\def\@evenfoot{}\def\sectionmark##1{}\def\subsectionmark##1{}}

%    ****************************************

%    *            MISCELLANEOUS             *

%    ****************************************

%

% DATE

%

\def\today{\ifcase\month\or

  January\or February\or March\or April\or May\or June\or

  July\or August\or September\or October\or November\or December\fi

  \space\number\day, \number\year}

% EQUATION and EQNARRAY -- put here because it must follow \chapter definition

%

% \newcounter{equation}

%

\@addtoreset{equation}{chapter}   % Makes \chapter reset 'equation' counter.

\def\theequation{\thechapter.\arabic{equation}}

% \jot = 3pt      % Extra space added between lines of an eqnarray environment

% The macro \@eqnnum defines how equation numbers are to appear in equations.

%

% \def\@eqnnum{(\theequation)}

%

%    ****************************************

%    *           INITIALIZATION             *

%    ****************************************

%

% Default initializations

\thesis{thesis}   % default thesis rather than dissertation

%\ps@myheadings                   % 'myheadings' page style

\pagenumbering{arabic}      % Arabic page numbers

\onecolumn                  % Single-column.

\if@twoside\else\raggedbottom\fi % Ragged bottom unless twoside option.

\setstretch{1.7}                % Initial baselinestretch