Subversion Repositories plasma

---------------------------------------------------------------------

-- TITLE: Register Bank

-- AUTHOR: Steve Rhoads (rhoadss@yahoo.com)

-- DATE CREATED: 2/2/01

-- FILENAME: reg_bank.vhd

-- PROJECT: Plasma CPU core

-- COPYRIGHT: Software placed into the public domain by the author.

--    Software 'as is' without warranty.  Author liable for nothing.

-- DESCRIPTION:

--    Implements a register bank with 32 registers that are 32-bits wide.

--    There are two read-ports and one write port.

---------------------------------------------------------------------

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_unsigned.all;

use work.mlite_pack.all;

entity reg_bank is

   generic(memory_type : string := "GENERIC");

   port(clk            : in  std_logic;

        reset_in       : in  std_logic;

        rs_index       : in  std_logic_vector(5 downto 0);

        rt_index       : in  std_logic_vector(5 downto 0);

        rd_index       : in  std_logic_vector(5 downto 0);

        reg_source_out : out std_logic_vector(31 downto 0);

        reg_target_out : out std_logic_vector(31 downto 0);

        reg_dest_new   : in  std_logic_vector(31 downto 0);

        intr_enable    : out std_logic);

end; --entity reg_bank

--------------------------------------------------------------------

-- The ram_block architecture attempts to use TWO dual-port memories.

-- Different FPGAs and ASICs need different implementations.

-- Choose one of the RAM implementations below.

-- I need feedback on this section!

--------------------------------------------------------------------

architecture ram_block of reg_bank is

   signal intr_enable_reg : std_logic;

   type ram_type is array(31 downto 0) of std_logic_vector(31 downto 0);

   --controls access to dual-port memories

   signal addr_a1, addr_a2, addr_b : std_logic_vector(4 downto 0);

   signal data_out1, data_out2     : std_logic_vector(31 downto 0);

   signal write_enable             : std_logic;

--   signal sig_false                : std_logic := '0';

--   signal sig_true                 : std_logic := '1';

--   signal zero_sig                 : std_logic_vector(15 downto 0) := ZERP(15 downto 0);

begin

reg_proc: process(clk, rs_index, rt_index, rd_index, reg_dest_new,

      intr_enable_reg, data_out1, data_out2, reset_in)

begin

   --setup for first dual-port memory

   if rs_index = "101110" then  --reg_epc CP0 14

      addr_a1 <= "00000";

   else

      addr_a1 <= rs_index(4 downto 0);

   end if;

   case rs_index is

   when "000000" => reg_source_out <= ZERO;

   when "101100" => reg_source_out <= ZERO(31 downto 1) & intr_enable_reg;

   when "111111" => reg_source_out <= ZERO(31 downto 8) & "00110000"; --intr vector

   when others   => reg_source_out <= data_out1;

   end case;

   --setup for second dual-port memory

   addr_a2 <= rt_index(4 downto 0);

   case rt_index is

   when "000000" => reg_target_out <= ZERO;

   when others   => reg_target_out <= data_out2;

   end case;

   --setup second port (write port) for both dual-port memories

   if rd_index /= "000000" and rd_index /= "101100" then

      write_enable <= '1';

   else

      write_enable <= '0';

   end if;

   if rd_index = "101110" then  --reg_epc CP0 14

      addr_b <= "00000";

   else

      addr_b <= rd_index(4 downto 0);

   end if;

   if reset_in = '1' then

      intr_enable_reg <= '0';

   elsif rising_edge(clk) then

      if rd_index = "101110" then  --reg_epc CP0 14

         intr_enable_reg <= '0';           --disable interrupts

      elsif rd_index = "101100" then

         intr_enable_reg <= reg_dest_new(0);

      end if;

   end if;

   intr_enable <= intr_enable_reg;

end process;

------------------------------------------------------------

-- Pick only ONE of the dual-port RAM implementations below!

------------------------------------------------------------

   -- Option #1

   -- One tri-port RAM, two read-ports, one write-port

   -- 32 registers 32-bits wide

   tri_port_mem:

   if memory_type = "GENERIC" generate

      ram_proc: process(clk, addr_a1, addr_a2, addr_b, reg_dest_new,

            write_enable)

      variable tri_port_ram : ram_type;

      begin

         data_out1 <= tri_port_ram(conv_integer(addr_a1));

         data_out2 <= tri_port_ram(conv_integer(addr_a2));

         if rising_edge(clk) then

            if write_enable = '1' then

               tri_port_ram(conv_integer(addr_b)) := reg_dest_new;

            end if;

         end if;

      end process;

   end generate; --tri_port_mem

   -- Option #2

   -- Two dual-port RAMs, each with one read-port and one write-port

   -- According to the Xilinx answers database record #4075 this 

   -- architecture may cause Synplify to infer synchronous dual-port 

   -- RAM using RAM16x1D.  

   dual_port_mem:

   if memory_type = "DUAL_PORT" generate

      ram_proc2: process(clk, addr_a1, addr_a2, addr_b, reg_dest_new,

            write_enable)

      variable dual_port_ram1 : ram_type;

      variable dual_port_ram2 : ram_type;

      begin

         data_out1 <= dual_port_ram1(conv_integer(addr_a1));

         data_out2 <= dual_port_ram2(conv_integer(addr_a2));

         if rising_edge(clk) then

            if write_enable = '1' then

               dual_port_ram1(conv_integer(addr_b)) := reg_dest_new;

               dual_port_ram2(conv_integer(addr_b)) := reg_dest_new;

            end if;

         end if;

      end process;

   end generate; --dual_port_mem

   -- Option #3

   -- Generic Two-Port Synchronous RAM

   -- generic_tpram can be obtained from:

   -- http://www.opencores.org/cvsweb.shtml/generic_memories/

   -- Supports ASICs (Artisan, Avant, and Virage) and Xilinx FPGA

--   generic_mem:

--   if memory_type = "OPENCORES_MEM" generate

--      bank1 : generic_tpram port map (

--         clk_a  => clk,

--         rst_a  => '0',

--         ce_a   => '1',

--         we_a   => '0',

--         oe_a   => '1',

--         addr_a => addr_a1,

--         di_a   => ZERO,

--         do_a   => data_out1,

--

--         clk_b  => clk,

--         rst_b  => '0',

--         ce_b   => '1',

--         we_b   => write_enable,

--         oe_b   => '0',

--         addr_b => addr_b,

--         di_a   => reg_dest_new);

--

--      bank2 : generic_tpram port map (

--         clk_a  => clk,

--         rst_a  => '0',

--         ce_a   => '1',

--         we_a   => '0',

--         oe_a   => '1',

--         addr_a => addr_a2,

--         di_a   => ZERO,

--         do_a   => data_out2,

--

--         clk_b  => clk,

--         rst_b  => '0',

--         ce_b   => '1',

--         we_b   => write_enable,

--         oe_b   => '0',

--         addr_b => addr_b,

--         di_a   => reg_dest_new);

--   end generate; --generic_mem

   -- Option #4

   -- Xilinx mode using four 16x16 banks

--   xilinx_mem:

--   if memory_type = "XILINX" generate

--      bank1_high: ramb4_s16_s16 port map (

--         clka  => clk,

--         rsta  => sig_false,

--         addra => addr_a1,

--         dia   => zero_sig,

--         ena   => sig_true,

--         wea   => sig_false,

--         doa   => data_out1(31 downto 16),

--

--         clkb  => clk,

--         rstb  => sig_false,

--         addrb => addr_b,

--         dib   => reg_dest_new(31 downto 16),

--         enb   => sig_true,

--         web   => write_enable);

--

--      bank1_low: ramb4_s16_s16 port map (

--         clka  => clk,

--         rsta  => sig_false,

--         addra => addr_a1,

--         dia   => zero_sig,

--         ena   => sig_true,

--         wea   => sig_false,

--         doa   => data_out1(15 downto 0),

--

--         clkb  => clk,

--         rstb  => sig_false,

--         addrb => addr_b,

--         dib   => reg_dest_new(15 downto 0),

--         enb   => sig_true,

--         web   => write_enable);

--

--      bank2_high: ramb4_s16_s16 port map (

--         clka  => clk,

--         rsta  => sig_false,

--         addra => addr_a2,

--         dia   => zero_sig,

--         ena   => sig_true,

--         wea   => sig_false,

--         doa   => data_out2(31 downto 16),

--

--         clkb  => clk,

--         rstb  => sig_false,

--         addrb => addr_b,

--         dib   => reg_dest_new(31 downto 16),

--         enb   => sig_true,

--         web   => write_enable);

--

--      bank2_low: ramb4_s16_s16 port map (

--         clka  => clk,

--         rsta  => sig_false,

--         addra => addr_a2,

--         dia   => zero_sig,

--         ena   => sig_true,

--         wea   => sig_false,

--         doa   => data_out2(15 downto 0),

--

--         clkb  => clk,

--         rstb  => sig_false,

--         addrb => addr_b,

--         dib   => reg_dest_new(15 downto 0),

--         enb   => sig_true,

--         web   => write_enable);

--   end generate; --xilinx_mem

   -- Option #5

   -- Altera LPM_RAM_DP

   altera_mem:

   if memory_type = "ALTERA" generate

      lpm_ram_dp_component1 : lpm_ram_dp

      GENERIC MAP (

         lpm_width => 32,

         lpm_widthad => 5,

         rden_used => "FALSE",

         intended_device_family => "UNUSED",

         lpm_indata => "REGISTERED",

         lpm_wraddress_control => "REGISTERED",

         lpm_rdaddress_control => "UNREGISTERED",

         lpm_outdata => "UNREGISTERED",

         use_eab => "ON",

         lpm_type => "LPM_RAM_DP"

      )

      PORT MAP (

         wren => write_enable,

         wrclock => clk,

         data => reg_dest_new,

         rdaddress => addr_a1,

         wraddress => addr_b,

         q => data_out1

      );

      lpm_ram_dp_component2 : lpm_ram_dp

      GENERIC MAP (

         lpm_width => 32,

         lpm_widthad => 5,

         rden_used => "FALSE",

         intended_device_family => "UNUSED",

         lpm_indata => "REGISTERED",

         lpm_wraddress_control => "REGISTERED",

         lpm_rdaddress_control => "UNREGISTERED",

         lpm_outdata => "UNREGISTERED",

         use_eab => "ON",

         lpm_type => "LPM_RAM_DP"

      )

      PORT MAP (

         wren => write_enable,

         wrclock => clk,

         data => reg_dest_new,

         rdaddress => addr_a2,

         wraddress => addr_b,

         q => data_out2

      );

   end generate; --altera_mem

end; --architecture ram_block