Subversion Repositories plasma

---------------------------------------------------------------------

-- TITLE: Memory Controller

-- AUTHOR: Steve Rhoads (rhoadss@yahoo.com)

-- DATE CREATED: 1/31/01

-- FILENAME: mem_ctrl.vhd

-- PROJECT: MIPS CPU core

-- COPYRIGHT: Software placed into the public domain by the author.

--    Software 'as is' without warranty.  Author liable for nothing.

-- DESCRIPTION:

--    Memory controller for the MIPS CPU.

--    Supports Big or Little Endian mode.

--    This entity could implement interfaces to:

--       Data cache

--       Address cache

--       Memory management unit (MMU)

--       DRAM controller

---------------------------------------------------------------------

library ieee;

use ieee.std_logic_1164.all;

use work.mips_pack.all;

entity mem_ctrl is

   port(clk          : in std_logic;

        reset_in     : in std_logic;

        pause_in     : in std_logic;

        nullify_op   : in std_logic;

        address_pc   : in std_logic_vector(31 downto 0);

        opcode_out   : out std_logic_vector(31 downto 0);

        address_data : in std_logic_vector(31 downto 0);

        mem_source   : in mem_source_type;

        data_write   : in std_logic_vector(31 downto 0);

        data_read    : out std_logic_vector(31 downto 0);

        pause_out    : out std_logic;

        mem_address  : out std_logic_vector(31 downto 0);

        mem_data_w   : out std_logic_vector(31 downto 0);

        mem_data_r   : in std_logic_vector(31 downto 0);

        mem_byte_sel : out std_logic_vector(3 downto 0);

        mem_write    : out std_logic;

        mem_pause    : in std_logic);

end; --entity mem_ctrl

architecture logic of mem_ctrl is

   --"00" = big_endian; "11" = little_endian

   constant little_endian : std_logic_vector(1 downto 0) := "00";

   signal opcode_reg : std_logic_vector(31 downto 0);

   signal next_opcode_reg : std_logic_vector(31 downto 0);

   signal setup_done : std_logic;

begin

mem_proc: process(clk, reset_in, pause_in, nullify_op,

                  address_pc, address_data, mem_source, data_write,

                  mem_data_r, mem_pause,

                  opcode_reg, next_opcode_reg, setup_done)

   variable data, datab   : std_logic_vector(31 downto 0);

   variable opcode_temp   : std_logic_vector(31 downto 0);

   variable byte_sel_temp : std_logic_vector(3 downto 0);

   variable write_temp    : std_logic;

   variable setup_done_var : std_logic;

   variable pause         : std_logic;

   variable address_temp  : std_logic_vector(31 downto 0);

   variable bits          : std_logic_vector(1 downto 0);

   variable mem_data_w_v  : std_logic_vector(31 downto 0);

begin

   byte_sel_temp := "0000";

   write_temp := '0';

   pause := '0';

   setup_done_var := setup_done;

   address_temp := address_pc;

   data := mem_data_r;

   datab := ZERO;

   mem_data_w_v := ZERO; --"ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ";

   case mem_source is

   when mem_read32 =>

      datab := data;

   when mem_read16 | mem_read16s =>

      if address_data(1) = little_endian(1) then

         datab(15 downto 0) := data(31 downto 16);

      else

         datab(15 downto 0) := data(15 downto 0);

      end if;

      if mem_source = mem_read16 or datab(15) = '0' then

         datab(31 downto 16) := ZERO(31 downto 16);

      else

         datab(31 downto 16) := ONES(31 downto 16);

      end if;

   when mem_read8 | mem_read8s =>

      bits := address_data(1 downto 0) xor little_endian;

      case bits is

      when "00" => datab(7 downto 0) := data(31 downto 24);

      when "01" => datab(7 downto 0) := data(23 downto 16);

      when "10" => datab(7 downto 0) := data(15 downto 8);

      when others => datab(7 downto 0) := data(7 downto 0);

      end case;

      if mem_source = mem_read8 or datab(7) = '0' then

         datab(31 downto 8) := ZERO(31 downto 8);

      else

         datab(31 downto 8) := ONES(31 downto 8);

      end if;

   when mem_write32 =>

      write_temp := '1';

      mem_data_w_v := data_write;

      byte_sel_temp := "1111";

   when mem_write16 =>

      write_temp := '1';

      mem_data_w_v := data_write(15 downto 0) & data_write(15 downto 0);

      if address_data(1) = little_endian(1) then

         byte_sel_temp := "1100";

      else

         byte_sel_temp := "0011";

      end if;

   when mem_write8 =>

      write_temp := '1';

      mem_data_w_v := data_write(7 downto 0) & data_write(7 downto 0) &

                  data_write(7 downto 0) & data_write(7 downto 0);

      bits := address_data(1 downto 0) xor little_endian;

      case bits is

      when "00" =>

         byte_sel_temp := "1000";

      when "01" =>

         byte_sel_temp := "0100";

      when "10" =>

         byte_sel_temp := "0010";

      when others =>

         byte_sel_temp := "0001";

      end case;

   when others =>

   end case;

   opcode_temp := opcode_reg;

   if mem_source = mem_none then

      setup_done_var := '0';

      if pause_in = '0' and mem_pause = '0' then

         opcode_temp := data;

      end if;

   else

      pause := not setup_done;

      setup_done_var := '1';

      if setup_done = '1' then

         address_temp := address_data;

         if mem_pause = '0' then

            opcode_temp := next_opcode_reg;

            setup_done_var := '0';

         end if;

      end if;

   end if;

   if nullify_op = '1' then

      opcode_temp := ZERO;  --NOP

   end if;

   if reset_in = '1' then

      setup_done_var := '0';

      opcode_temp := ZERO;

   end if;

   if rising_edge(clk) then

      opcode_reg <= opcode_temp;

      if setup_done = '0' then

         next_opcode_reg <= data;

      end if;

      setup_done <= setup_done_var;

   end if;

   opcode_out <= opcode_reg;

   data_read <= datab;

   pause_out <= mem_pause or pause;

   mem_byte_sel <= byte_sel_temp;

   mem_address <= address_temp;

   mem_write <= write_temp and setup_done;

   mem_data_w <= mem_data_w_v;

end process; --data_proc

end; --architecture logic