Subversion Repositories plasma

---------------------------------------------------------------------

-- TITLE: Plamsa Interface (clock divider and interface to FPGA board)

-- AUTHOR: Steve Rhoads (rhoadss@yahoo.com)

-- DATE CREATED: 6/6/02

-- FILENAME: plasma_if.vhd

-- PROJECT: Plasma CPU core

-- COPYRIGHT: Software placed into the public domain by the author.

--    Software 'as is' without warranty.  Author liable for nothing.

-- DESCRIPTION:

--    This entity divides the clock by two and interfaces to the 

--    Altera EP20K200EFC484-2X FPGA board.

--    Xilinx Spartan-3 XC3S200FT256-4 FPGA.

---------------------------------------------------------------------

library ieee;

use ieee.std_logic_1164.all;

--use work.mlite_pack.all;

entity plasma_if is

   port(clk_in      : in std_logic;

        reset       : in std_logic;

        uart_read   : in std_logic;

        uart_write  : out std_logic;

        ram_address : out std_logic_vector(31 downto 2);

        ram_data    : inout std_logic_vector(31 downto 0);

        ram_ce1_n   : out std_logic;

        ram_ub1_n   : out std_logic;

        ram_lb1_n   : out std_logic;

        ram_ce2_n   : out std_logic;

        ram_ub2_n   : out std_logic;

        ram_lb2_n   : out std_logic;

        ram_we_n    : out std_logic;

        ram_oe_n    : out std_logic;

        gpio0_out   : out std_logic_vector(31 downto 0);

        gpioA_in    : in std_logic_vector(31 downto 0));

end; --entity plasma_if

architecture logic of plasma_if is

   component plasma

      generic(memory_type : string := "XILINX_16X"; --"DUAL_PORT_" "ALTERA_LPM";

              log_file    : string := "UNUSED");

      port(clk               : in std_logic;

           reset             : in std_logic;

           uart_write        : out std_logic;

           uart_read         : in std_logic;

           address           : out std_logic_vector(31 downto 2);

           byte_we           : out std_logic_vector(3 downto 0);

           data_write        : out std_logic_vector(31 downto 0);

           data_read         : in std_logic_vector(31 downto 0);

           mem_pause_in      : in std_logic;

           gpio0_out         : out std_logic_vector(31 downto 0);

           gpioA_in          : in std_logic_vector(31 downto 0));

   end component; --plasma

   signal clk_reg      : std_logic;

   signal we_n_next    : std_logic;

   signal we_n_reg     : std_logic;

   signal mem_address  : std_logic_vector(31 downto 2);

   signal data_write   : std_logic_vector(31 downto 0);

   signal data_reg     : std_logic_vector(31 downto 0);

   signal byte_we      : std_logic_vector(3 downto 0);

   signal mem_pause_in : std_logic;

begin  --architecture

   --Divide 50 MHz clock by two

   clk_div: process(reset, clk_in, clk_reg, we_n_next)

   begin

      if reset = '1' then

         clk_reg <= '0';

      elsif rising_edge(clk_in) then

         clk_reg <= not clk_reg;

      end if;

      if reset = '1' then

         we_n_reg <= '1';

         data_reg <= (others => '0');

      elsif falling_edge(clk_in) then

         we_n_reg <= we_n_next or not clk_reg;

         data_reg <= ram_data;

      end if;

   end process; --clk_div

   mem_pause_in <= '0';

   ram_address <= mem_address(31 downto 2);

   ram_we_n <= we_n_reg;

   --For Xilinx Spartan-3 Starter Kit

   ram_control:

   process(clk_reg, mem_address, byte_we, data_write)

   begin

      if mem_address(30 downto 28) = "001" then  --RAM

         ram_ce1_n <= '0';

         ram_ce2_n <= '0';

         if byte_we = "0000" then      --read

            ram_data  <= (others => 'Z');

            ram_ub1_n <= '0';

            ram_lb1_n <= '0';

            ram_ub2_n <= '0';

            ram_lb2_n <= '0';

            we_n_next <= '1';

            ram_oe_n  <= '0';

         else                                    --write

            if clk_reg = '1' then

               ram_data <= (others => 'Z');

            else

               ram_data <= data_write;

            end if;

            ram_ub1_n <= not byte_we(3);

            ram_lb1_n <= not byte_we(2);

            ram_ub2_n <= not byte_we(1);

            ram_lb2_n <= not byte_we(0);

            we_n_next <= '0';

            ram_oe_n  <= '1';

         end if;

      else

         ram_data <= (others => 'Z');

         ram_ce1_n <= '1';

         ram_ub1_n <= '1';

         ram_lb1_n <= '1';

         ram_ce2_n <= '1';

         ram_ub2_n <= '1';

         ram_lb2_n <= '1';

         we_n_next <= '1';

         ram_oe_n  <= '1';

      end if;

   end process; --ram_control

   u1_plama: plasma

      generic map (memory_type => "XILINX_16X",

                   log_file    => "UNUSED")

      PORT MAP (

         clk               => clk_reg,

         reset             => reset,

         uart_write        => uart_write,

         uart_read         => uart_read,

         address           => mem_address,

         byte_we           => byte_we,

         data_write        => data_write,

         data_read         => data_reg,

         mem_pause_in      => mem_pause_in,

         gpio0_out         => gpio0_out,

         gpioA_in          => gpioA_in);

end; --architecture logic