Subversion Repositories plasma

---------------------------------------------------------------------

-- TITLE: Test Bench

-- AUTHOR: Steve Rhoads (rhoadss@yahoo.com)

-- DATE CREATED: 4/21/01

-- FILENAME: tbench.vhd

-- PROJECT: Plasma CPU core

-- COPYRIGHT: Software placed into the public domain by the author.

--    Software 'as is' without warranty.  Author liable for nothing.

-- DESCRIPTION:

--    This entity provides a test bench for testing the Plasma CPU core.

---------------------------------------------------------------------

library ieee;

use ieee.std_logic_1164.all;

use work.mlite_pack.all;

use ieee.std_logic_unsigned.all;

entity tbench is

end; --entity tbench

architecture logic of tbench is

   constant memory_type : string :=

   "TRI_PORT_X";

--   "DUAL_PORT_";

--   "ALTERA_LPM";

--   "XILINX_16X";

   constant log_file  : string :=

--   "UNUSED";

   "output.txt";

   signal clk         : std_logic := '1';

   signal reset       : std_logic := '1';

   signal interrupt   : std_logic := '0';

   signal mem_write   : std_logic;

   signal address     : std_logic_vector(31 downto 2);

   signal data_write  : std_logic_vector(31 downto 0);

   signal data_read   : std_logic_vector(31 downto 0);

   signal pause1      : std_logic := '0';

   signal pause2      : std_logic := '0';

   signal pause       : std_logic;

   signal no_ddr_start: std_logic;

   signal no_ddr_stop : std_logic;

   signal byte_we     : std_logic_vector(3 downto 0);

   signal uart_write  : std_logic;

   signal gpioA_in    : std_logic_vector(31 downto 0) := (others => '0');

begin  --architecture

   --Uncomment the line below to test interrupts

   interrupt <= '1' after 20 us when interrupt = '0' else '0' after 445 ns;

   clk   <= not clk after 50 ns;

   reset <= '0' after 500 ns;

   pause1 <= '1' after 700 ns when pause1 = '0' else '0' after 200 ns;

   pause2 <= '1' after 300 ns when pause2 = '0' else '0' after 200 ns;

   pause <= pause1 or pause2;

   gpioA_in(20) <= not gpioA_in(20) after 200 ns; --E_RX_CLK

   gpioA_in(19) <= not gpioA_in(19) after 20 us;  --E_RX_DV

   gpioA_in(18 downto 15) <= gpioA_in(18 downto 15) + 1 after 400 ns; --E_RX_RXD

   gpioA_in(14) <= not gpioA_in(14) after 200 ns; --E_TX_CLK

   u1_plasma: plasma

      generic map (memory_type => memory_type,

                   ethernet    => '1',

                   use_cache   => '1',

                   log_file    => log_file)

      PORT MAP (

         clk               => clk,

         reset             => reset,

         uart_read         => uart_write,

         uart_write        => uart_write,

         address           => address,

         byte_we           => byte_we,

         data_write        => data_write,

         data_read         => data_read,

         mem_pause_in      => pause,

         no_ddr_start      => no_ddr_start,

         no_ddr_stop       => no_ddr_stop,

         gpio0_out         => open,

         gpioA_in          => gpioA_in);

   dram_proc: process(clk, address, byte_we, data_write, pause)

      constant ADDRESS_WIDTH : natural := 16;

      type storage_array is

         array(natural range 0 to (2 ** ADDRESS_WIDTH) / 4 - 1) of

         std_logic_vector(31 downto 0);

      variable storage : storage_array;

      variable data    : std_logic_vector(31 downto 0);

      variable index   : natural := 0;

   begin

      index := conv_integer(address(ADDRESS_WIDTH-1 downto 2));

      data := storage(index);

      if byte_we(0) = '1' then

         data(7 downto 0) := data_write(7 downto 0);

      end if;

      if byte_we(1) = '1' then

         data(15 downto 8) := data_write(15 downto 8);

      end if;

      if byte_we(2) = '1' then

         data(23 downto 16) := data_write(23 downto 16);

      end if;

      if byte_we(3) = '1' then

         data(31 downto 24) := data_write(31 downto 24);

      end if;

      if rising_edge(clk) then

         if address(30 downto 28) = "001" and byte_we /= "0000" then

            storage(index) := data;

         end if;

      end if;

      if pause = '0' then

         data_read <= data;

      end if;

   end process;

end; --architecture logic