Subversion Repositories plasma

---------------------------------------------------------------------

-- TITLE: UART

-- AUTHOR: Steve Rhoads (rhoadss@yahoo.com)

-- DATE CREATED: 5/29/02

-- FILENAME: uart.vhd

-- PROJECT: Plasma CPU core

-- COPYRIGHT: Software placed into the public domain by the author.

--    Software 'as is' without warranty.  Author liable for nothing.

-- DESCRIPTION:

--    Implements the UART.

---------------------------------------------------------------------

library ieee;

use ieee.std_logic_1164.all;

use ieee.std_logic_misc.all;

use ieee.std_logic_arith.all;

use ieee.std_logic_textio.all;

use ieee.std_logic_unsigned.all;

use std.textio.all;

use work.mlite_pack.all;

entity uart is

   generic(log_file : string := "UNUSED");

   port(clk          : in std_logic;

        reset        : in std_logic;

        enable_read  : in std_logic;

        enable_write : in std_logic;

        data_in      : in std_logic_vector(7 downto 0);

        data_out     : out std_logic_vector(7 downto 0);

        uart_read    : in std_logic;

        uart_write   : out std_logic;

        busy_write   : out std_logic;

        data_avail   : out std_logic);

end; --entity uart

architecture logic of uart is

   signal delay_write_reg : std_logic_vector(9 downto 0);

   signal bits_write_reg  : std_logic_vector(3 downto 0);

   signal data_write_reg  : std_logic_vector(8 downto 0);

   signal delay_read_reg  : std_logic_vector(9 downto 0);

   signal bits_read_reg   : std_logic_vector(3 downto 0);

   signal data_read_reg   : std_logic_vector(7 downto 0);

   signal data_save_reg   : std_logic_vector(17 downto 0);

   signal busy_write_sig  : std_logic;

   signal read_value_reg  : std_logic_vector(6 downto 0);

   signal uart_read2      : std_logic;

begin

uart_proc: process(clk, reset, enable_read, enable_write, data_in,

                   data_write_reg, bits_write_reg, delay_write_reg,

                   data_read_reg, bits_read_reg, delay_read_reg,

                   data_save_reg, read_value_reg, uart_read2,

                   busy_write_sig, uart_read)

   constant COUNT_VALUE : std_logic_vector(9 downto 0) :=

--      "0100011110";  --33MHz/2/57600Hz = 0x11e

--      "1101100100";  --50MHz/57600Hz = 0x364

      "0110110010";  --25MHz/57600Hz = 0x1b2 -- Plasma IF uses div2

--      "0011011001";  --12.5MHz/57600Hz = 0xd9

--      "0000000100";  --for debug (shorten read_value_reg)

begin

   uart_read2 <= read_value_reg(read_value_reg'length - 1);

   if reset = '1' then

      data_write_reg  <= ZERO(8 downto 1) & '1';

      bits_write_reg  <= "0000";

      delay_write_reg <= ZERO(9 downto 0);

      read_value_reg  <= ONES(read_value_reg'length-1 downto 0);

      data_read_reg   <= ZERO(7 downto 0);

      bits_read_reg   <= "0000";

      delay_read_reg  <= ZERO(9 downto 0);

      data_save_reg   <= ZERO(17 downto 0);

   elsif rising_edge(clk) then

      --Write UART

      if bits_write_reg = "0000" then               --nothing left to write?

         if enable_write = '1' then

            delay_write_reg <= ZERO(9 downto 0);    --delay before next bit

            bits_write_reg <= "1010";               --number of bits to write

            data_write_reg <= data_in & '0';        --remember data & start bit

         end if;

      else

         if delay_write_reg /= COUNT_VALUE then

            delay_write_reg <= delay_write_reg + 1; --delay before next bit

         else

            delay_write_reg <= ZERO(9 downto 0);    --reset delay

            bits_write_reg <= bits_write_reg - 1;   --bits left to write

            data_write_reg <= '1' & data_write_reg(8 downto 1);

         end if;

      end if;

      --Average uart_read signal

      if uart_read = '1' then

         if read_value_reg /= ONES(read_value_reg'length - 1 downto 0) then

            read_value_reg <= read_value_reg + 1;

         end if;

      else

         if read_value_reg /= ZERO(read_value_reg'length - 1 downto 0) then

            read_value_reg <= read_value_reg - 1;

         end if;

      end if;

      --Read UART

      if delay_read_reg = ZERO(9 downto 0) then     --done delay for read?

         if bits_read_reg = "0000" then             --nothing left to read?

            if uart_read2 = '0' then                --wait for start bit

               delay_read_reg <= '0' & COUNT_VALUE(9 downto 1);  --half period

               bits_read_reg <= "1001";             --bits left to read

            end if;

         else

            delay_read_reg <= COUNT_VALUE;          --initialize delay

            bits_read_reg <= bits_read_reg - 1;     --bits left to read

            data_read_reg <= uart_read2 & data_read_reg(7 downto 1);

         end if;

      else

         delay_read_reg <= delay_read_reg - 1;      --delay

      end if;

      --Control character buffer

      if bits_read_reg = "0000" and delay_read_reg = COUNT_VALUE then

         if data_save_reg(8) = '0' or

               (enable_read = '1' and data_save_reg(17) = '0') then

            --Empty buffer

            data_save_reg(8 downto 0) <= '1' & data_read_reg;

         else

            --Second character in buffer

            data_save_reg(17 downto 9) <= '1' & data_read_reg;

            if enable_read = '1' then

               data_save_reg(8 downto 0) <= data_save_reg(17 downto 9);

            end if;

         end if;

      elsif enable_read = '1' then

         data_save_reg(17) <= '0';                  --data_available

         data_save_reg(8 downto 0) <= data_save_reg(17 downto 9);

      end if;

   end if;  --rising_edge(clk)

   uart_write <= data_write_reg(0);

   if bits_write_reg /= "0000"

-- Comment out the following line for full UART simulation (much slower)

   and log_file = "UNUSED"

   then

      busy_write_sig <= '1';

   else

      busy_write_sig <= '0';

   end if;

   busy_write <= busy_write_sig;

   data_avail <= data_save_reg(8);

   data_out <= data_save_reg(7 downto 0);

end process; --uart_proc

-- synthesis_off

   uart_logger:

   if log_file /= "UNUSED" generate

      uart_proc: process(clk, enable_write, data_in)

         file store_file : text open write_mode is log_file;

         variable hex_file_line : line;

         variable c : character;

         variable index : natural;

         variable line_length : natural := 0;

      begin

         if rising_edge(clk) and busy_write_sig = '0' then

            if enable_write = '1' then

               index := conv_integer(data_in(6 downto 0));

               if index /= 10 then

                  c := character'val(index);

                  write(hex_file_line, c);

                  line_length := line_length + 1;

               end if;

               if index = 10 or line_length >= 72 then

--The following line may have to be commented out for synthesis

                  writeline(store_file, hex_file_line);

                  line_length := 0;

               end if;

            end if; --uart_sel

         end if; --rising_edge(clk)

      end process; --uart_proc

   end generate; --uart_logger

-- synthesis_on

end; --architecture logic