URL https://opencores.org/ocsvn/pltbutils/pltbutils/trunk

Subversion Repositories pltbutils

[/] [pltbutils/] [trunk/] [src/] [vhdl/] [pltbutils_func_pkg.vhd] - Blame information for rev 95

Go to most recent revision | Details | Compare with Previous | View Log


----------------------------------------------------------------------
----                                                              ----
---- PlTbUtils Fuctions and Procedures Package                    ----
----                                                              ----
---- This file is part of the PlTbUtils project                   ----
---- http://opencores.org/project,pltbutils                       ----
----                                                              ----
---- Description:                                                 ----
---- PlTbUtils is a collection of functions, procedures and       ----
---- components for easily creating stimuli and checking response ----
---- in automatic self-checking testbenches.                      ----
----                                                              ----
---- This file defines fuctions and procedures for controlling    ----
---- stimuli to a DUT and checking response.                      ----
----                                                              ----
---- To Do:                                                       ----
---- -                                                            ----
----                                                              ----
---- Author(s):                                                   ----
---- - Per Larsson, pela@opencores.org                            ----
----                                                              ----
----------------------------------------------------------------------
----                                                              ----
---- Copyright (C) 2013-2014 Authors and OPENCORES.ORG            ----
----                                                              ----
---- This source file may be used and distributed without         ----
---- restriction provided that this copyright statement is not    ----
---- removed from the file and that any derivative work contains  ----
---- the original copyright notice and the associated disclaimer. ----
----                                                              ----
---- This source file is free software; you can redistribute it   ----
---- and/or modify it under the terms of the GNU Lesser General   ----
---- Public License as published by the Free Software Foundation; ----
---- either version 2.1 of the License, or (at your option) any   ----
---- later version.                                               ----
----                                                              ----
---- This source is distributed in the hope that it will be       ----
---- useful, but WITHOUT ANY WARRANTY; without even the implied   ----
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ----
---- PURPOSE. See the GNU Lesser General Public License for more  ----
---- details.                                                     ----
----                                                              ----
---- You should have received a copy of the GNU Lesser General    ----
---- Public License along with this source; if not, download it   ----
---- from http://www.opencores.org/lgpl.shtml                     ----
----                                                              ----
----------------------------------------------------------------------
library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
use std.textio.all;
use work.txt_util.all;
use work.pltbutils_user_cfg_pkg.all;
 
package pltbutils_func_pkg is
 
  -- See the package body for a description of the functions and procedures.
  constant C_PLTBUTILS_STRLEN  : natural := 80;
  constant C_PLTBUTILS_TIMEOUT : time    := 10 sec;
  constant C_WAIT_BEFORE_STOP_TIME : time := 1 us;
 
  -- Type for status- and control variable
  type pltbv_t is
    record
      testcase_name    : string(1 to C_PLTBUTILS_STRLEN);
      testcase_name_len: integer;
      test_num         : integer;
      test_name        : string(1 to C_PLTBUTILS_STRLEN);
      test_name_len    : integer;
      info             : string(1 to C_PLTBUTILS_STRLEN);
      info_len         : integer;
      test_cnt         : integer;
      chk_cnt          : integer;
      err_cnt          : integer;
      chk_cnt_in_test  : integer;
      err_cnt_in_test  : integer;
      stop_sim         : std_logic;
    end record;
 
  constant C_PLTBV_INIT : pltbv_t := (
    (others => ' '),   -- testcase_name
    1,                 -- testcase_name_len
    0,                 -- test_num
    (others => ' '),   -- test_name
    1,                 -- test_name_len
    (others => ' '),   -- info
    1,                 -- info_len
    0,                 -- test_cnt
    0,                 -- chk_cnt
    0,                 -- err_cnt
    0,                 -- chk_cnt_in_test
    0,                 -- err_cnt_in_test
    '0'                -- stop_sim
  );
 
  -- Status- and control signal (subset of pltbv_t)
  type pltbs_t is
    record
      test_num  : natural;
      test_name : string(1 to C_PLTBUTILS_STRLEN);
      info      : string(1 to C_PLTBUTILS_STRLEN);
      chk_cnt   : natural;
      err_cnt   : natural;
      stop_sim  : std_logic;
    end record;
 
  constant C_PLTBS_INIT : pltbs_t := (
    0,                  -- test_num
    (others => ' '),    -- test_name    
    (others => ' '),    -- info
    0,                  -- chk_cnt
    0,                  -- err_cnt
    '0'                 -- stop_sim
  );
 
  -- startsim
  procedure startsim(
    constant testcase_name      : in    string;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
 
  -- endsim
  procedure endsim(
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant show_success_fail  : in    boolean := false;
    constant force              : in    boolean := false
  );
 
  -- starttest
  procedure starttest(
    constant num                : in    integer := -1;
    constant name               : in    string;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure starttest(
    constant name               : in    string;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
 
  -- endtest
  procedure endtest(
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
 
  -- print, printv, print2
  procedure print(
    constant active             : in    boolean;
    signal   s                  : out   string;
    constant txt                : in    string
  );
  procedure print(
    signal   s                  : out   string;
    constant txt                : in    string
  );
  procedure printv(
    constant active             : in    boolean;
    variable s                  : out   string;
    constant txt                : in    string
  );
  procedure printv(
    variable s                  : out   string;
    constant txt                : in    string
  );
  procedure print(
    constant active             : in    boolean;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant txt                : in    string
  );
  procedure print(
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant txt                : in    string
  );
  procedure print2(
    constant active             : in    boolean;
    signal   s                  : out   string;
    constant txt                : in    string
  );
  procedure print2(
    signal   s                  : out   string;
    constant txt                : in    string
  );
  procedure print2(
    constant active             : in    boolean;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant txt                : in    string
  );
  procedure print2(
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant txt                : in    string
  );
 
  -- waitclks
  procedure waitclks(
    constant N                  : in    natural;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  );
 
  -- waitsig
  procedure waitsig(
    signal   s                  : in    integer;
    constant value              : in    integer;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  );
  procedure waitsig(
    signal   s                  : in    std_logic;
    constant value              : in    std_logic;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  );
  procedure waitsig(
    signal   s                  : in    std_logic;
    constant value              : in    integer;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  );
  procedure waitsig(
    signal   s                  : in    std_logic_vector;
    constant value              : in    std_logic_vector;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  );
  procedure waitsig(
    signal   s                  : in    std_logic_vector;
    constant value              : in    integer;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  );
  procedure waitsig(
    signal   s                  : in    unsigned;
    constant value              : in    unsigned;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  );
  procedure waitsig(
    signal   s                  : in    unsigned;
    constant value              : in    integer;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  );
  procedure waitsig(
    signal   s                  : in    signed;
    constant value              : in    signed;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  );
  procedure waitsig(
    signal   s                  : in    signed;
    constant value              : in    integer;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  );
 
  -- check
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    integer;
    constant expected           : in    integer;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    std_logic;
    constant expected           : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    std_logic;
    constant expected           : in    integer;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    std_logic_vector;
    constant expected           : in    std_logic_vector;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    std_logic_vector;
    constant expected           : in    std_logic_vector;
    constant mask               : in    std_logic_vector;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    std_logic_vector;
    constant expected           : in    integer;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    std_logic_vector;
    constant expected           : in    integer;
    constant mask               : in    std_logic_vector;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    unsigned;
    constant expected           : in    unsigned;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    unsigned;
    constant expected           : in    integer;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    signed;
    constant expected           : in    signed;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    signed;
    constant expected           : in    integer;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    string;
    constant expected           : in    string;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
  procedure check(
    constant rpt                : in    string;
    constant expr               : in    boolean;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
   procedure check(
    constant rpt                : in    string;
    constant expr               : in    boolean;
    constant actual             : in    string;
    constant expected           : in    string;
    constant mask               : in    string;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
 
  -- to_ascending
  function to_ascending(
    constant s                  : std_logic_vector
  ) return std_logic_vector;
  function to_ascending(
    constant s                  : unsigned
  ) return unsigned;
  function to_ascending(
    constant s                  : signed
  ) return signed;
 
  -- to_descending
  function to_descending(
    constant s                  : std_logic_vector
  ) return std_logic_vector;
  function to_descending(
    constant s                  : unsigned
  ) return unsigned;
  function to_descending(
    constant s                  : signed
  ) return signed;
 
  -- hxstr
  function hxstr(
    constant s                  : std_logic_vector;
    constant prefix             : string := "";
    constant postfix            : string := ""
  ) return string;
  function hxstr(
    constant s                  : unsigned;
    constant prefix             : string := "";
    constant postfix            : string := ""
  ) return string;
  function hxstr(
    constant s                  : signed;
    constant prefix             : string := "";
    constant postfix            : string := ""
  ) return string;
 
  -- pltbutils internal procedure(s), do not call from user's code
  procedure pltbs_update(
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
 
  procedure stopsim(
    constant timestamp          : in time
  );
 
  procedure pltbutils_error(
    constant rpt                : in string;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  );
 
  procedure startsim_msg(
    constant testcase_name      : in string;
    constant timestamp          : in time
  );
 
  procedure endsim_msg(
    constant testcase_name      : in string;
    constant timestamp          : in time;
    constant num_tests          : in integer;
    constant num_checks         : in integer;
    constant num_errors         : in integer;
    constant show_success_fail  : in boolean
  );
 
  procedure starttest_msg(
    constant test_num           : in integer;
    constant test_name          : in string;
    constant timestamp          : in time
  );
 
  procedure endtest_msg(
    constant test_num           : in integer;
    constant test_name          : in string;
    constant timestamp          : in time;
    constant num_checks_in_test : in integer;
    constant num_errors_in_test : in integer
  );
 
  procedure check_msg(
    constant rpt                : in string;
    constant timestamp          : in time;
    constant expr               : in boolean;
    constant actual             : in string;
    constant expected           : in string;
    constant mask               : in string;
    constant test_num           : in integer;
    constant test_name          : in string;
    constant check_num          : in integer;
    constant err_cnt_in_test    : in integer
  );
 
  procedure error_msg(
    constant rpt                : in string;
    constant timestamp          : in time;
    constant test_num           : in integer;
    constant test_name          : in string;
    constant err_cnt_in_test    : in integer
  );
 
end package pltbutils_func_pkg;
 
package body pltbutils_func_pkg is
 
  ----------------------------------------------------------------------------
  -- startsim
  --
  -- procedure startsim(
  --   constant testcase_name      : in    string;
  --   variable pltbv              : inout pltbv_t;
  --   signal   pltbs              : out   pltbs_t
  -- )
  --
  -- Displays a message at start of simulation message, and initializes
  -- PlTbUtils' status and control variable and -signal.
  -- Call startsim() only once.
  --
  -- Arguments:
  --   testcase_name            Name of the test case, e.g. "tc1".
  --
  --   pltbv, pltbs             PlTbUtils' status- and control variable and
  --                            -signal.
  --
  -- NOTE:
  -- The start-of-simulation message is not only intended to be informative
  -- for humans. It is also intended to be searched for by scripts,
  -- e.g. for collecting results from a large number of regression tests.
  -- For this reason, the message must be consistent and unique.
  --
  -- DO NOT MODIFY the message "--- START OF SIMULATION ---".
  -- DO NOT OUTPUT AN IDENTICAL MESSAGE anywhere else.
  --
  -- Example:
  -- startsim("tc1", pltbv, pltbs);
  ----------------------------------------------------------------------------
  procedure startsim(
    constant testcase_name      : in    string;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
    variable timestamp          : time;
  begin
    timestamp := now;
    pltbv := C_PLTBV_INIT;
    printv(pltbv.testcase_name, testcase_name);
    pltbv.testcase_name_len := testcase_name'length;
    printv(pltbv.test_name, "START OF SIMULATION");
    pltbv.test_name_len     := 19;
    printv(pltbv.info, testcase_name);
    pltbv.info_len          := testcase_name'length;
    pltbs_update(pltbv, pltbs);
    if C_PLTBUTILS_USE_STD_STARTSIM_MSG then
      startsim_msg(testcase_name, timestamp);
    end if;
    if C_PLTBUTILS_USE_CUSTOM_STARTSIM_MSG then
      custom_startsim_msg(testcase_name, timestamp);
    end if;
  end procedure startsim;
 
  ----------------------------------------------------------------------------
  -- endsim
  --
  -- procedure endsim(
  --   variable pltbv              : inout pltbv_t;
  --   signal   pltbs              : out   pltbs_t;
  --   constant show_success_fail  : in  boolean := false;
  --   constant force              : in  boolean := false
  -- )
  --
  -- Displays a message at end of simulation message, presents the simulation
  -- results, and stops the simulation.
  -- Call endsim() it only once.
  --
  -- Arguments:
  --   pltbv, pltbs             PlTbUtils' status- and control variable and
  --                            -signal.
  --
  --   show_success_fail        If true, endsim() shows "*** SUCCESS ***",
  --                            "*** FAIL ***", or "*** NO CHECKS ***".
  --                            Optional, default is false.
  --
  --   force                    If true, forces the simulation to stop using an
  --                            assert failure statement. Use this option only
  --                            if the normal way of stopping the simulation
  --                            doesn't work (see below).
  --                            Optional, default is false.
  --
  -- The testbench should be designed so that all clocks stop when endsim()
  -- sets the signal pltbs.stop_sim to '1'. This should stop the simulator.
  -- In some cases that doesn't work, then set the force argument to true, which
  -- causes a false assert failure, which should stop the simulator.
  -- Scripts searching transcript logs for errors and failures, should ignore
  -- the failure with "--- FORCE END OF SIMULATION ---" as part of the report.
  --
  -- NOTE:
  -- The end-of-simulation messages and success/fail messages are not only
  -- intended to be informative for humans. They are also intended to be
  -- searched for by scripts, e.g. for collecting results from a large number
  -- of regression tests.
  -- For this reason, the message must be consistent and unique.
  --
  -- DO NOT MODIFY the messages "--- END OF SIMULATION ---",
  -- "*** SUCCESS ***", "*** FAIL ***", "*** NO CHECKS ***".
  -- DO NOT OUTPUT IDENTICAL MESSAGES anywhere else.
  --
  -- Examples:
  -- endsim(pltbv, pltbs);
  -- endsim(pltbv, pltbs, true);
  -- endsim(pltbv, pltbs, true, true);
  ----------------------------------------------------------------------------
  procedure endsim(
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant show_success_fail  : in    boolean := false;
    constant force              : in    boolean := false
  ) is
    variable timestamp : time;
  begin
    timestamp := now;
    if C_PLTBUTILS_USE_STD_ENDSIM_MSG then
      endsim_msg(pltbv.testcase_name(1 to pltbv.testcase_name_len), timestamp,
        pltbv.test_cnt, pltbv.chk_cnt, pltbv.err_cnt, show_success_fail);
    end if;
    if C_PLTBUTILS_USE_CUSTOM_ENDSIM_MSG then
      custom_endsim_msg(pltbv.testcase_name(1 to pltbv.testcase_name_len), timestamp,
        pltbv.test_cnt, pltbv.chk_cnt, pltbv.err_cnt, show_success_fail);
    end if;
    pltbv.test_num      := 0;
    printv(pltbv.test_name, "END OF SIMULATION");
    pltbv.test_name_len := 17;
    pltbv.stop_sim      := '1';
    pltbs_update(pltbv, pltbs);
    wait for C_WAIT_BEFORE_STOP_TIME;
    if force then
      if C_PLTBUTILS_USE_STD_STOPSIM then
        stopsim(now);
      end if;
      if C_PLTBUTILS_USE_CUSTOM_STOPSIM then
        custom_stopsim(now);
      end if;
    end if;
    wait;
  end procedure endsim;
 
  ----------------------------------------------------------------------------
  -- starttest
  --
  -- procedure starttest(
  --   constant num                : in    integer := -1;
  --   constant name               : in    string;
  --   variable pltbv              : inout pltbv_t;
  --   signal   pltbs              : out   pltbs_t
  -- )
  --
  -- Sets a number (optional) and a name for a test. The number and name will
  -- be printed to the screen, and displayed in the simulator's waveform
  -- window.
  -- The test number and name is also included if there errors reported by the
  -- check() procedure calls.
  --
  -- Arguments:
  --   num                      Test number. Optional, default is to increment
  --                            the current test number.
  --
  --   name                     Test name.
  --
  --   pltbv, pltbs             PlTbUtils' status- and control variable and
  --                            -signal.
  --
  -- If the test number is omitted, a new test number is automatically
  -- computed by incrementing the current test number.
  -- Manually setting the test number may make it easier to find the test code
  -- in the testbench code, though.
  --
  -- Examples:
  -- starttest("Reset test", pltbv, pltbs);
  -- starttest(1, "Reset test", pltbv, pltbs);
  ----------------------------------------------------------------------------
  procedure starttest(
    constant num                : in    integer := -1;
    constant name               : in    string;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
    variable timestamp : time;
  begin
    timestamp := now;
    if num = -1 then
      pltbv.test_num := pltbv.test_num + 1;
    else
      pltbv.test_num := num;
    end if;
    printv(pltbv.test_name, name);
    pltbv.test_name_len := name'length;
    pltbv.test_cnt := pltbv.test_cnt + 1;
    pltbv.chk_cnt_in_test := 0;
    pltbv.err_cnt_in_test := 0;
    pltbs_update(pltbv, pltbs);
    if C_PLTBUTILS_USE_STD_STARTTEST_MSG then
     starttest_msg(pltbv.test_num, name, timestamp);
    end if;
    if C_PLTBUTILS_USE_CUSTOM_STARTTEST_MSG then
     custom_starttest_msg(pltbv.test_num, name, timestamp);
    end if;
  end procedure starttest;
 
  procedure starttest(
    constant name               : in    string;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    starttest(-1, name, pltbv, pltbs);
  end procedure starttest;
 
  ----------------------------------------------------------------------------
  -- endtest
  --
  -- procedure endtest(
  --   variable pltbv              : inout pltbv_t;
  --   signal   pltbs              : out   pltbs_t
  -- )
  --
  -- Prints an end-of-test message to the screen.
  --
  -- Arguments:
  --   pltbv, pltbs             PlTbUtils' status- and control variable and
  --                            -signal.
  --
  -- Example:
  -- endtest(pltbv, pltbs);
  ----------------------------------------------------------------------------
  procedure endtest(
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
    variable timestamp : time;
  begin
    timestamp := now;
    if C_PLTBUTILS_USE_STD_ENDTEST_MSG then
      endtest_msg(pltbv.test_num, pltbv.test_name(1 to pltbv.test_name_len),
        timestamp, pltbv.chk_cnt_in_test, pltbv.err_cnt_in_test);
    end if;
    if C_PLTBUTILS_USE_CUSTOM_ENDTEST_MSG then
      custom_endtest_msg(pltbv.test_num, pltbv.test_name(1 to pltbv.test_name_len),
        timestamp, pltbv.chk_cnt_in_test, pltbv.err_cnt_in_test);
    end if;
    printv(pltbv.test_name, " ");
    pltbv.test_name_len := 1;
    pltbs_update(pltbv, pltbs);
  end procedure endtest;
 
  ----------------------------------------------------------------------------
  -- print printv print2
  --
  -- procedure print(
  --   signal   s                  : out   string;
  --   constant txt                : in    string
  -- )
  --
  -- procedure print(
  --   constant active             : in    boolean;
  --   signal   s                  : out   string;
  --   constant txt                : in    string
  -- )
  --
  -- procedure print(
  --   variable pltbv              : inout pltbv_t;
  --   signal   pltbs              : out   pltbs_t;
  --   constant txt                : in    string
  -- )
  --
  -- procedure print(
  --   constant active             : in    boolean;
  --   variable pltbv              : inout pltbv_t;
  --   signal   pltbs              : out   pltbs_t;
  --   constant txt                : in    string
  -- )
  --
  -- procedure printv(
  --   variable s                  : out   string;
  --   constant txt                : in    string
  -- )
  --
  -- procedure printv(
  --   constant active             : in    boolean;
  --   variable s                  : out   string;
  --   constant txt                : in    string
  -- )
  --
  -- procedure print2(
  --   signal   s                  : out   string;
  --   constant txt                : in    string
  -- )
  --
  -- procedure print2(
  --   constant active             : in    boolean;
  --   signal   s                  : out   string;
  --   constant txt                : in    string
  -- )
  --
  -- procedure print2(
  --   variable pltbv              : inout pltbv_t;
  --   signal   pltbs              : out   pltbs_t;
  --   constant txt                : in    string
  -- )
  --
  -- procedure print2(
  --   constant active             : in    boolean;
  --   variable pltbv              : inout pltbv_t;
  --   signal   pltbs              : out   pltbs_t;
  --   constant txt                : in    string
  -- )
  --
  -- print() prints text messages to a signal for viewing in the simulator's
  -- waveform window. printv() does the same thing, but to a variable instead.
  -- print2() prints both to a signal and to the transcript window.
  -- The type of the output can be string or pltbv_t+pltbs_t.
  --
  -- Arguments:
  --   s                        Signal or variable of type string to be
  --                            printed to.
  --
  --   txt                      The text.
  --
  --   active                   The text is only printed if active is true.
  --                            Useful for debug switches, etc.
  --
  --   pltbv, pltbs             PlTbUtils' status- and control variable and
  --                            -signal.
  --
  -- If the string txt is longer than the signal s, the text will be truncated.
  -- If txt is shorter, s will be padded with spaces.
  --
  -- Examples:
  -- print(msg, "Hello, world"); -- Prints to signal msg
  -- print(G_DEBUG, msg, "Hello, world"); -- Prints to signal msg if
  --                                      -- generic G_DEBUG is true
  -- printv(v_msg, "Hello, world"); -- Prints to variable msg
  -- print(pltbv, pltbs, "Hello, world"); -- Prints to "info" in waveform window
  -- print2(msg, "Hello, world"); -- Prints to signal and transcript window
  -- print2(pltbv, pltbs, "Hello, world"); -- Prints to "info" in waveform and
  --                                      -- transcript windows
  ----------------------------------------------------------------------------
  procedure print(
    constant active             : in    boolean;
    signal   s                  : out   string;
    constant txt                : in    string
  ) is
    variable j : positive := txt 'low;
  begin
    if active then
      for i in s'range loop
        if j <= txt 'high then
          s(i) <= txt (j);
        else
          s(i) <= ' ';
        end if;
        j := j + 1;
      end loop;
    end if;
  end procedure print;
 
  procedure print(
    signal   s                  : out   string;
    constant txt                : in    string
  ) is
  begin
    print(true, s, txt);
  end procedure print;
 
  procedure printv(
    constant active             : in    boolean;
    variable s                  : out   string;
    constant txt                : in    string
  ) is
    variable j : positive := txt 'low;
  begin
    if active then
      for i in s'range loop
        if j <= txt 'high then
          s(i) := txt (j);
        else
          s(i) := ' ';
        end if;
        j := j + 1;
      end loop;
    end if;
  end procedure printv;
 
  procedure printv(
    variable s                  : out   string;
    constant txt                : in    string
  ) is
  begin
    printv(true, s, txt);
  end procedure printv;
 
  -- Print to info element in pltbv/pltbs, which shows up in waveform window
  procedure print(
    constant active             : in    boolean;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant txt                : in    string
  ) is
    variable j : positive := txt 'low;
  begin
    if active then
      printv(pltbv.info, txt);
      pltbv.info_len := txt'length;
      pltbs_update(pltbv, pltbs);
    end if;
  end procedure print;
 
  procedure print(
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant txt                : in    string
  ) is
  begin
    print(true, pltbv, pltbs, txt);
  end procedure print;
 
  procedure print2(
    constant active             : in    boolean;
    signal   s                  : out   string;
    constant txt                : in    string
  ) is
  begin
    if active then
      print(s, txt);
      print(txt);
    end if;
  end procedure print2;
 
  procedure print2(
    signal   s                  : out   string;
    constant txt                : in    string
  ) is
  begin
    print(true, s, txt);
  end procedure print2;
 
  procedure print2(
    constant active             : in    boolean;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant txt                : in    string
  ) is
  begin
    print(active, pltbv, pltbs, txt);
    print(active, txt);
  end procedure print2;
 
  procedure print2(
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant txt                : in    string
  ) is
  begin
    print(true, pltbv, pltbs, txt);
  end procedure print2;
 
  ----------------------------------------------------------------------------
  -- waitclks
  --
  -- procedure waitclks(
  --   constant n                  : in    natural;
  --   signal   clk                : in    std_logic;
  --   variable pltbv              : inout pltbv_t;
  --   signal   pltbs              : out   pltbs_t;
  --   constant falling            : in    boolean := false;
  --   constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  -- )
  --
  -- Waits specified amount of clock cycles of the specified clock.
  -- Or, to be more precise, a specified number of specified clock edges of
  -- the specified clock.
  --
  -- Arguments:
  --   n                        Number of rising or falling clock edges to wait.
  --
  --   clk                      The clock to wait for.
  --
  --   pltbv, pltbs             PlTbUtils' status- and control variable and
  --                            -signal.
  --
  --   falling                  If true, waits for falling edges, otherwise
  --                            rising edges. Optional, default is false.
  --
  --   timeout                  Timeout time, in case the clock is not working.
  --                            Optional, default is C_PLTBUTILS_TIMEOUT.
  --
  -- Examples:
  -- waitclks(5, sys_clk, pltbv, pltbs);
  -- waitclks(5, sys_clk, pltbv, pltbs true);
  -- waitclks(5, sys_clk, pltbv, pltbs, true, 1 ms);
  ----------------------------------------------------------------------------
  procedure waitclks(
    constant n                  : in    natural;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  ) is
    variable i                  : natural := n;
    variable v_timeout_time     : time;
  begin
    v_timeout_time := now + timeout;
    while i > 0 loop
      if falling then
        wait until falling_edge(clk) for timeout / n;
      else
        wait until rising_edge(clk)  for timeout / n;
      end if;
      i := i - 1;
    end loop;
    if now >= v_timeout_time then
      pltbutils_error("waitclks() timeout", pltbv, pltbs);
    end if;
  end procedure waitclks;
 
  ----------------------------------------------------------------------------
  -- waitsig
  --
  -- procedure waitsig(
  --   signal   s                  : in    integer|std_logic|std_logic_vector|unsigned|signed;
  --   constant value              : in    integer|std_logic|std_logic_vector|unsigned|signed;
  --   signal   clk                : in    std_logic;
  --   variable pltbv              : inout pltbv_t;
  --   signal   pltbs              : out   pltbs_t;
  --   constant falling            : in    boolean := false;
  --   constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  -- )
  --
  -- Waits until a signal has reached a specified value after specified clock
  -- edge.
  --
  -- Arguments:
  --   s                        The signal to test.
  --                            Supported types: integer, std_logic,
  --                            std_logic_vector, unsigned, signed.
  --
  --   value                    Value to wait for.
  --                            Same type as data or integer.
  --
  --   clk                      The clock.
  --
  --   pltbv, pltbs             PlTbUtils' status- and control variable and
  --                            -signal.
  --
  --   falling                  If true, waits for falling edges, otherwise
  --                            rising edges. Optional, default is false.
  --
  --   timeout                  Timeout time, in case the clock is not working.
  --                            Optional, default is C_PLTBUTILS_TIMEOUT.
  --
  -- Examples:
  -- waitsig(wr_en, '1', sys_clk, pltbv, pltbs);
  -- waitsig(rd_en,   1, sys_clk, pltbv, pltbs, true);
  -- waitclks(full, '1', sys_clk, pltbv, pltbs, true, 1 ms);
  ----------------------------------------------------------------------------
  procedure waitsig(
    signal   s                  : in    integer;
    constant value              : in    integer;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  ) is
    variable v_timeout_time     : time;
  begin
    v_timeout_time := now + timeout;
    l1 : loop
      waitclks(1, clk, pltbv, pltbs, falling, timeout);
      exit l1 when s = value or now >= v_timeout_time;
    end loop;
    if now >= v_timeout_time then
      pltbutils_error("waitsig() timeout", pltbv, pltbs);
    end if;
  end procedure waitsig;
 
  procedure waitsig(
    signal   s                  : in    std_logic;
    constant value              : in    std_logic;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  ) is
    variable v_timeout_time     : time;
  begin
    v_timeout_time := now + timeout;
    l1 : loop
      waitclks(1, clk, pltbv, pltbs, falling, timeout);
      exit l1 when s = value or now >= v_timeout_time;
    end loop;
    if now >= v_timeout_time then
      pltbutils_error("waitsig() timeout", pltbv, pltbs);
    end if;
  end procedure waitsig;
 
  procedure waitsig(
    signal   s                  : in    std_logic;
    constant value              : in    integer;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  ) is
    variable v_value            : std_logic;
    variable v_timeout_time     : time;
  begin
    case value is
      when 0      => v_value := '0';
      when 1      => v_value := '1';
      when others => v_value := 'X';
    end case;
    if v_value /= 'X' then
      waitsig(s, v_value, clk, pltbv, pltbs, falling, timeout);
    else
      pltbutils_error("waitsig() timeout", pltbv, pltbs);
    end if;
  end procedure waitsig;
 
  procedure waitsig(
    signal   s                  : in    std_logic_vector;
    constant value              : in    std_logic_vector;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  ) is
    variable v_timeout_time     : time;
  begin
    v_timeout_time := now + timeout;
    l1 : loop
      waitclks(1, clk, pltbv, pltbs, falling, timeout);
      exit l1 when s = value or now >= v_timeout_time;
    end loop;
    if now >= v_timeout_time then
      pltbutils_error("waitsig() timeout", pltbv, pltbs);
    end if;
  end procedure waitsig;
 
  procedure waitsig(
    signal   s                  : in    std_logic_vector;
    constant value              : in    integer;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  ) is
    variable v_timeout_time     : time;
  begin
    waitsig(s, std_logic_vector(to_unsigned(value, s'length)), clk,
            pltbv, pltbs, falling, timeout);
  end procedure waitsig;
 
  procedure waitsig(
    signal   s                  : in    unsigned;
    constant value              : in    unsigned;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  ) is
    variable v_timeout_time     : time;
  begin
    v_timeout_time := now + timeout;
    l1 : loop
      waitclks(1, clk, pltbv, pltbs, falling, timeout);
      exit l1 when s = value or now >= v_timeout_time;
    end loop;
    if now >= v_timeout_time then
      pltbutils_error("waitsig() timeout", pltbv, pltbs);
    end if;
  end procedure waitsig;
 
  procedure waitsig(
    signal   s                  : in    unsigned;
    constant value              : in    integer;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  ) is
    variable v_timeout_time     : time;
  begin
    waitsig(s, to_unsigned(value, s'length), clk,
            pltbv, pltbs, falling, timeout);
  end procedure waitsig;
 
  procedure waitsig(
    signal   s                  : in    signed;
    constant value              : in    signed;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  ) is
    variable v_timeout_time     : time;
  begin
    v_timeout_time := now + timeout;
    l1 : loop
      waitclks(1, clk, pltbv, pltbs, falling, timeout);
      exit l1 when s = value or now >= v_timeout_time;
    end loop;
    if now >= v_timeout_time then
      pltbutils_error("waitsig() timeout", pltbv, pltbs);
    end if;
  end procedure waitsig;
 
  procedure waitsig(
    signal   s                  : in    signed;
    constant value              : in    integer;
    signal   clk                : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t;
    constant falling            : in    boolean := false;
    constant timeout            : in    time    := C_PLTBUTILS_TIMEOUT
  ) is
    variable v_timeout_time     : time;
  begin
    waitsig(s, to_signed(value, s'length), clk,
            pltbv, pltbs, falling, timeout);
  end procedure waitsig;
 
  ----------------------------------------------------------------------------
  -- check
  --
  -- procedure check(
  --   constant rpt             : in    string;
  --   constant actual          : in    integer|std_logic|std_logic_vector|unsigned|signed|string;
  --   constant expected        : in    integer|std_logic|std_logic_vector|unsigned|signed|string;
  --   variable pltbv           : inout pltbv_t;
  --   signal   pltbs           : out   pltbs_t
  -- )
  --
  -- procedure check(
  --   constant rpt             : in    string;
  --   constant actual          : in    std_logic_vector;
  --   constant expected        : in    std_logic_vector;
  --   constant mask            : in    std_logic_vector;
  --   variable pltbv           : inout pltbv_t;
  --   signal   pltbs           : out   pltbs_t
  -- )
  --
  -- procedure check(
  --   constant rpt             : in    string;
  --   constant expr            : in    boolean;
  --   variable pltbv           : inout pltbv_t;
  --   signal   pltbs           : out   pltbs_t
  -- )
  --
  -- Checks that the value of a signal or variable is equal to expected.
  -- If not equal, displays an error message and increments the error counter.
  --
  -- Arguments:
  --   rpt                      Report message to be displayed in case of
  --                            mismatch.
  --                            It is recommended that the message is unique
  --                            and that it contains the name of the signal
  --                            or variable being checked.
  --                            The message should NOT contain the expected
  --                            value, becase check() prints that
  --                            automatically.
  --
  --   actual                   The signal or variable to be checked.
  --                            Supported types: integer, std_logic,
  --                            std_logic_vector, unsigned, signed.
  --
  --   expected                 Expected value.
  --                            Same type as data or integer.
  --
  --   mask                     Bit mask and:ed to data and expected
  --                            before comparison.
  --                            Optional if data is std_logic_vector.
  --                            Not allowed for other types.
  --
  --   expr                     boolean expression for checking.
  --                            This makes it possible to check any kind of
  --                            expresion, not just equality.
  --
  --   pltbv, pltbs             PlTbUtils' status- and control variable and
  --                            -signal.
  --
  -- Examples:
  -- check("dat_o after reset", dat_o, 0, pltbv, pltbs);
  -- -- With mask:
  -- check("Status field in reg_o after start", reg_o, x"01", x"03", pltbv, pltbs);
  -- -- Boolean expression:
  -- check("Counter after data burst", cnt_o > 10, pltbv, pltbs);
  ----------------------------------------------------------------------------
  -- check integer
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    integer;
    constant expected           : in    integer;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    check(rpt, actual = expected, str(actual), str(expected), "", pltbv, pltbs);
  end procedure check;
 
  -- check std_logic
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    std_logic;
    constant expected           : in    std_logic;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    check(rpt, actual = expected, str(actual), str(expected), "", pltbv, pltbs);
  end procedure check;
 
  -- check std_logic against integer
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    std_logic;
    constant expected           : in    integer;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    check(rpt, ((actual = '0' and expected = 0) or (actual = '1' and expected = 1)),
          str(actual), str(expected), "", pltbv, pltbs);
  end procedure check;
 
  -- check std_logic_vector
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    std_logic_vector;
    constant expected           : in    std_logic_vector;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    check(rpt, actual = expected, hxstr(actual, "0x"), hxstr(expected, "0x"), "", pltbv, pltbs);
  end procedure check;
 
  -- check std_logic_vector with mask
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    std_logic_vector;
    constant expected           : in    std_logic_vector;
    constant mask               : in    std_logic_vector;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    check(rpt, (actual and mask) = (expected and mask),
          hxstr(actual, "0x"), hxstr(expected, "0x"), hxstr(mask, "0x"), pltbv, pltbs);
  end procedure check;
 
  -- check std_logic_vector against integer
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    std_logic_vector;
    constant expected           : in    integer;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    check(rpt, actual, std_logic_vector(to_signed(expected, actual'length)), pltbv, pltbs);
  end procedure check;
 
  -- check std_logic_vector with mask against integer
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    std_logic_vector;
    constant expected           : in    integer;
    constant mask               : in    std_logic_vector;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    check(rpt, actual, std_logic_vector(to_signed(expected, actual'length)), mask, pltbv, pltbs);
  end procedure check;
 
  -- check unsigned
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    unsigned;
    constant expected           : in    unsigned;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    check(rpt, actual = expected, hxstr(actual, "0x"), hxstr(expected, "0x"), "", pltbv, pltbs);
  end procedure check;
 
  -- check unsigned against integer
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    unsigned;
    constant expected           : in    integer;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    check(rpt, actual, to_unsigned(expected, actual'length), pltbv, pltbs);
  end procedure check;
 
  -- check signed
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    signed;
    constant expected           : in    signed;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    check(rpt, actual = expected, hxstr(actual, "0x"), hxstr(expected, "0x"), "", pltbv, pltbs);
  end procedure check;
 
  -- check signed against integer
  -- TODO: find the bug reported by tb_pltbutils when expected  is negative (-1):
  --       ** Error: (vsim-86) numstd_conv_unsigned_nu: NATURAL arg value is negative (-1)
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    signed;
    constant expected           : in    integer;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    check(rpt, actual, to_signed(expected, actual'length), pltbv, pltbs);
  end procedure check;
 
  -- check string
  procedure check(
    constant rpt                : in    string;
    constant actual             : in    string;
    constant expected           : in    string;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
    variable mismatch : boolean := false;
  begin
    if actual'length /= expected'length then
      mismatch := true;
    else
      for i in 0 to actual'length-1 loop
        if actual(i+actual'low) /= expected(i+expected'low) then
          mismatch := true;
          exit;
        end if;
      end loop;
    end if;
    check(rpt, not mismatch, actual, expected, "", pltbv, pltbs);
  end procedure check;
 
  -- check with boolean expression
  -- Check signal or variable with a boolean expression as argument C_EXPR.
  -- This allowes any kind of check.
  procedure check(
    constant rpt                : in    string;
    constant expr               : in    boolean;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    check(rpt, expr, "", "", "", pltbv, pltbs);
  end procedure check;
 
  procedure check(
    constant rpt                : in    string;
    constant expr               : in    boolean;
    constant actual             : in    string;
    constant expected           : in    string;
    constant mask               : in    string;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
    variable timestamp          : time;
  begin
    timestamp := now;
    pltbv.chk_cnt := pltbv.chk_cnt + 1;
    pltbv.chk_cnt_in_test := pltbv.chk_cnt_in_test + 1;
    if not expr then
      pltbv.err_cnt := pltbv.err_cnt + 1;
      pltbv.err_cnt_in_test := pltbv.err_cnt_in_test + 1;
    end if;
    pltbs_update(pltbv, pltbs);
    if C_PLTBUTILS_USE_STD_CHECK_MSG then
      check_msg(rpt, timestamp, expr, actual, expected, mask, pltbv.test_num,
        pltbv.test_name(1 to pltbv.test_name_len), pltbv.chk_cnt, pltbv.err_cnt_in_test);
    end if;
    if C_PLTBUTILS_USE_CUSTOM_CHECK_MSG then
      custom_check_msg(rpt, timestamp, expr, actual, expected, mask, pltbv.test_num,
        pltbv.test_name(1 to pltbv.test_name_len), pltbv.chk_cnt, pltbv.err_cnt_in_test);
    end if;
    pltbs_update(pltbv, pltbs);
  end procedure check;
 
  ----------------------------------------------------------------------------
  -- to_ascending
  --
  -- function to_ascending(
  --  constant s                  : std_logic_vector
  -- ) return std_logic_vector;
  --
  -- function to_ascending(
  --  constant s                  : unsigned
  -- ) return unsigned
  --
  -- function to_ascending(
  --  constant s                  : signed
  -- ) return signed;
  --
  -- Converts a signal or variable to ascending range ("to-range").
  -- The argument s can have ascending or descending range.
  ----------------------------------------------------------------------------
  function to_ascending(
    constant s                  : std_logic_vector
  ) return std_logic_vector is
    variable r : std_logic_vector(s'low to s'high);
  begin
    for i in r'range loop
      r(i) := s(i);
    end loop;
    return r;
  end function to_ascending;
 
  function to_ascending(
    constant s                  : unsigned
  ) return unsigned is
    variable r : unsigned(s'low to s'high);
  begin
    for i in r'range loop
      r(i) := s(i);
    end loop;
    return r;
  end function to_ascending;
 
  function to_ascending(
    constant s                  : signed
  ) return signed is
    variable r : signed(s'low to s'high);
  begin
    for i in r'range loop
      r(i) := s(i);
    end loop;
    return r;
  end function to_ascending;
 
  ----------------------------------------------------------------------------
  -- to_descending
  --
  -- function to_descending(
  --  constant s                  : std_logic_vector
  -- ) return std_logic_vector;
  --
  -- function to_descending(
  --  constant s                  : unsigned
  -- ) return unsigned
  --
  -- function to_descending(
  --  constant s                  : signed
  -- ) return signed;
  --
  -- Converts a signal or variable to descending range ("downto-range").
  -- The argument s can have ascending or descending range.
  ----------------------------------------------------------------------------
  function to_descending(
    constant s                  : std_logic_vector
  ) return std_logic_vector is
    variable r : std_logic_vector(s'high downto s'low);
  begin
    for i in r'range loop
      r(i) := s(i);
    end loop;
    return r;
  end function to_descending;
 
  function to_descending(
    constant s                  : unsigned
  ) return unsigned is
    variable r : unsigned(s'high downto s'low);
  begin
    for i in r'range loop
      r(i) := s(i);
    end loop;
    return r;
  end function to_descending;
 
  function to_descending(
    constant s                  : signed
  ) return signed is
    variable r : signed(s'high downto s'low);
  begin
    for i in r'range loop
      r(i) := s(i);
    end loop;
    return r;
  end function to_descending;
 
  ----------------------------------------------------------------------------
  -- hxstr
  -- function hxstr(
  --  constant s                  : std_logic_vector;
  --  constant prefix             : string := "";
  --  constant postfix            : string := ""
  -- ) return string;
  --
  -- function hxstr(
  --  constant s                  : unsigned;
  --  constant prefix             : string := "";
  --  constant postfix            : string := ""
  -- ) return string;
  --
  -- function hxstr(
  --  constant s                  : signed;
  --  constant prefix             : string := "";
  --  constant postfix            : string := ""
  -- ) return string;
  --
  -- Converts a signal to a string in hexadecimal format.
  -- An optional prefix can be specified, e.g. "0x".
  --
  -- The signal can have ascending range ( "to-range" ) or descending range
  -- ("downto-range").
  --
  -- hxstr is a wrapper function for hstr in txt_util.
  -- hstr only support std_logic_vector with descending range.
  --
  -- Examples:
  -- print("value=" & hxstr(s));
  -- print("value=" & hxstr(s, "0x"));
  ----------------------------------------------------------------------------
  function hxstr(
    constant s                  : std_logic_vector;
    constant prefix             : string := "";
    constant postfix            : string := ""
  ) return string is
  begin
    return prefix & hstr(to_descending(s)) & postfix;
  end function hxstr;
 
  function hxstr(
    constant s                  : unsigned;
    constant prefix             : string := "";
    constant postfix            : string := ""
  ) return string is
  begin
    return prefix & hstr(to_descending(std_logic_vector(s))) & postfix;
  end function hxstr;
 
  function hxstr(
    constant s                  : signed;
    constant prefix             : string := "";
    constant postfix            : string := ""
  ) return string is
  begin
    return prefix & hstr(to_descending(std_logic_vector(s))) & postfix;
  end function hxstr;
 
  ----------------------------------------------------------------------------
  -- pltbutils internal procedure(s), called from other pltbutils procedures.
  -- Do not to call this/these from user's code.
  -- This/these procedures are undocumented in the specification on purpose.
  ----------------------------------------------------------------------------
  procedure pltbs_update(
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    pltbs.test_num  <= pltbv.test_num;
    print(pltbs.test_name, pltbv.test_name);
    print(pltbs.info, pltbv.info);
    pltbs.chk_cnt   <= pltbv.chk_cnt;
    pltbs.err_cnt   <= pltbv.err_cnt;
    pltbs.stop_sim  <= pltbv.stop_sim;
  end procedure pltbs_update;
 
  procedure pltbutils_error(
    constant rpt                : in string;
    variable pltbv              : inout pltbv_t;
    signal   pltbs              : out   pltbs_t
  ) is
  begin
    pltbv.err_cnt := pltbv.err_cnt + 1;
    pltbv.err_cnt_in_test := pltbv.err_cnt_in_test + 1;
    pltbs_update(pltbv, pltbs);
    if C_PLTBUTILS_USE_STD_ERROR_MSG then
      error_msg(rpt, now, pltbv.test_num,
        pltbv.test_name(1 to pltbv.test_name_len), pltbv.err_cnt_in_test);
    end if;
    if C_PLTBUTILS_USE_CUSTOM_ERROR_MSG then
      custom_error_msg(rpt, now, pltbv.test_num,
        pltbv.test_name(1 to pltbv.test_name_len), pltbv.err_cnt_in_test);
    end if;
  end procedure pltbutils_error;
 
  procedure stopsim(
    constant timestamp          : in time
  ) is
  begin
    assert false
    report "--- FORCE END OF SIMULATION ---" &
           " (ignore this false failure message, it's not a real failure)"
    severity failure;
  end procedure stopsim;
 
  procedure startsim_msg(
    constant testcase_name      : in string;
    constant timestamp          : in time
  ) is
  begin
    print(lf & "--- START OF SIMULATION ---");
    print("Testcase: " & testcase_name);
    print(time'image(timestamp));
  end procedure startsim_msg;
 
  procedure endsim_msg(
    constant testcase_name      : in string;
    constant timestamp          : in time;
    constant num_tests          : in integer;
    constant num_checks         : in integer;
    constant num_errors         : in integer;
    constant show_success_fail  : in boolean
  ) is
    variable l : line;
  begin
    print(lf & "--- END OF SIMULATION ---");
    print("Note: the results presented below are based on the PlTbUtil's check() procedure calls.");
    print("      The design may contain more errors, for which there are no check() calls.");
    write(l, timestamp, right, 14);
    writeline(output, l);
    write(l, num_tests, right, 11);
    write(l, string'(" Tests"));
    writeline(output, l);
    write(l, num_checks, right, 11);
    write(l, string'(" Checks"));
    writeline(output, l);
    write(l, num_errors, right, 11);
    write(l, string'(" Errors"));
    writeline(output, l);
    if show_success_fail then
      if num_errors = 0 and num_checks > 0 then
        print("*** SUCCESS ***");
      elsif num_checks > 0 then
        print("*** FAIL ***");
      else
        print("*** NO CHECKS ***");
      end if;
    end if;
  end procedure endsim_msg;
 
  procedure starttest_msg(
    constant test_num           : in integer;
    constant test_name          : in string;
    constant timestamp          : in time
  ) is
  begin
    print(lf & "Test " & str(test_num) & ": " & test_name & " (" & time'image(timestamp) & ")");
  end procedure starttest_msg;
 
  procedure endtest_msg(
    constant test_num           : in integer;
    constant test_name          : in string;
    constant timestamp          : in time;
    constant num_checks_in_test : in integer;
    constant num_errors_in_test : in integer
  ) is
  begin
    print("Done with test " & str(test_num) & ": " & test_name & " (" & time'image(timestamp) & ")");
  end procedure endtest_msg;
 
  procedure check_msg(
    constant rpt                : in string;
    constant timestamp          : in time;
    constant expr               : in boolean;
    constant actual             : in string;
    constant expected           : in string;
    constant mask               : in string;
    constant test_num           : in integer;
    constant test_name          : in string;
    constant check_num          : in integer;
    constant err_cnt_in_test    : in integer
  ) is
    variable actual_str_len     : integer := 1;
    variable actual_str         : string(1 to actual'length+8) := (others => ' ');
    variable expected_str       : string(1 to expected'length+10) := (others => ' ');
    variable expected_str_len   : integer := 1;
    variable mask_str           : string(1 to mask'length+6) := (others => ' ');
    variable mask_str_len       : integer := 1;
  begin
    if not expr then -- Output message only if the check fails
      if actual /= "" then
        actual_str_len := 8 + actual'length;
        actual_str := " Actual=" & actual;
      end if;
      if expected /= "" then
        expected_str_len := 10 + expected'length;
        expected_str := " Expected=" & expected;
      end if;
      if mask /= "" then
        mask_str_len := 6 + mask'length;
        mask_str := " Mask=" & mask;
      end if;
      assert false
        report "Check " & str(check_num) & "; " & rpt & "; " &
               actual_str(1 to actual_str_len) &
               expected_str(1 to expected_str_len) &
               mask_str(1 to mask_str_len) &
               "  in test " & str(test_num) & " " & test_name
        severity error;
    end if;
  end procedure check_msg;
 
  procedure error_msg(
    constant rpt                : in string;
    constant timestamp          : in time;
    constant test_num           : in integer;
    constant test_name          : in string;
    constant err_cnt_in_test    : in integer
  ) is
  begin
    assert false
    report rpt & " in test " & str(test_num) & ": " & test_name
    severity error;
  end procedure error_msg;
 
end package body pltbutils_func_pkg;

Line No.	Rev	Author	Line
1	2	pela	`----------------------------------------------------------------------`
2			`---- ----`
3			`---- PlTbUtils Fuctions and Procedures Package ----`
4			`---- ----`
5			`---- This file is part of the PlTbUtils project ----`
6			`---- http://opencores.org/project,pltbutils ----`
7			`---- ----`
8			`---- Description: ----`
9			`---- PlTbUtils is a collection of functions, procedures and ----`
10			`---- components for easily creating stimuli and checking response ----`
11			`---- in automatic self-checking testbenches. ----`
12			`---- ----`
13			`---- This file defines fuctions and procedures for controlling ----`
14			`---- stimuli to a DUT and checking response. ----`
15			`---- ----`
16			`---- To Do: ----`
17			`---- - ----`
18			`---- ----`
19			`---- Author(s): ----`
20			`---- - Per Larsson, pela@opencores.org ----`
21			`---- ----`
22			`----------------------------------------------------------------------`
23			`---- ----`
24	24	pela	`---- Copyright (C) 2013-2014 Authors and OPENCORES.ORG ----`
25	2	pela	`---- ----`
26			`---- This source file may be used and distributed without ----`
27			`---- restriction provided that this copyright statement is not ----`
28			`---- removed from the file and that any derivative work contains ----`
29			`---- the original copyright notice and the associated disclaimer. ----`
30			`---- ----`
31			`---- This source file is free software; you can redistribute it ----`
32			`---- and/or modify it under the terms of the GNU Lesser General ----`
33			`---- Public License as published by the Free Software Foundation; ----`
34			`---- either version 2.1 of the License, or (at your option) any ----`
35			`---- later version. ----`
36			`---- ----`
37			`---- This source is distributed in the hope that it will be ----`
38			`---- useful, but WITHOUT ANY WARRANTY; without even the implied ----`
39			`---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ----`
40			`---- PURPOSE. See the GNU Lesser General Public License for more ----`
41			`---- details. ----`
42			`---- ----`
43			`---- You should have received a copy of the GNU Lesser General ----`
44			`---- Public License along with this source; if not, download it ----`
45			`---- from http://www.opencores.org/lgpl.shtml ----`
46			`---- ----`
47			`----------------------------------------------------------------------`
48			`library ieee;`
49			`use ieee.std_logic_1164.all;`
50			`use ieee.numeric_std.all;`
51			`use std.textio.all;`
52			`use work.txt_util.all;`
53	24	pela	`use work.pltbutils_user_cfg_pkg.all;`
54	2	pela
55			`package pltbutils_func_pkg is`
56
57			`-- See the package body for a description of the functions and procedures.`
58			`constant C_PLTBUTILS_STRLEN : natural := 80;`
59			`constant C_PLTBUTILS_TIMEOUT : time := 10 sec;`
60			`constant C_WAIT_BEFORE_STOP_TIME : time := 1 us;`
61	36	pela
62			`-- Type for status- and control variable`
63			`type pltbv_t is`
64			`record`
65			`testcase_name : string(1 to C_PLTBUTILS_STRLEN);`
66			`testcase_name_len: integer;`
67			`test_num : integer;`
68			`test_name : string(1 to C_PLTBUTILS_STRLEN);`
69			`test_name_len : integer;`
70			`info : string(1 to C_PLTBUTILS_STRLEN);`
71			`info_len : integer;`
72			`test_cnt : integer;`
73			`chk_cnt : integer;`
74			`err_cnt : integer;`
75			`chk_cnt_in_test : integer;`
76			`err_cnt_in_test : integer;`
77			`stop_sim : std_logic;`
78			`end record;`
79
80			`constant C_PLTBV_INIT : pltbv_t := (`
81			`(others => ' '), -- testcase_name`
82			`1, -- testcase_name_len`
83			`0, -- test_num`
84			`(others => ' '), -- test_name`
85			`1, -- test_name_len`
86			`(others => ' '), -- info`
87			`1, -- info_len`
88			`0, -- test_cnt`
89			`0, -- chk_cnt`
90			`0, -- err_cnt`
91			`0, -- chk_cnt_in_test`
92			`0, -- err_cnt_in_test`
93			`'0' -- stop_sim`
94			`);`
95
96			`-- Status- and control signal (subset of pltbv_t)`
97			`type pltbs_t is`
98			`record`
99	2	pela	`test_num : natural;`
100			`test_name : string(1 to C_PLTBUTILS_STRLEN);`
101			`info : string(1 to C_PLTBUTILS_STRLEN);`
102			`chk_cnt : natural;`
103			`err_cnt : natural;`
104			`stop_sim : std_logic;`
105			`end record;`
106	36	pela
107			`constant C_PLTBS_INIT : pltbs_t := (`
108			`0, -- test_num`
109			`(others => ' '), -- test_name`
110			`(others => ' '), -- info`
111			`0, -- chk_cnt`
112			`0, -- err_cnt`
113			`'0' -- stop_sim`
114			`);`
115
116			`-- startsim`
117	2	pela	`procedure startsim(`
118			`constant testcase_name : in string;`
119	36	pela	`variable pltbv : inout pltbv_t;`
120			`signal pltbs : out pltbs_t`
121	2	pela	`);`
122	36	pela
123	2	pela	`-- endsim`
124			`procedure endsim(`
125	36	pela	`variable pltbv : inout pltbv_t;`
126			`signal pltbs : out pltbs_t;`
127			`constant show_success_fail : in boolean := false;`
128			`constant force : in boolean := false`
129	2	pela	`);`
130	36	pela
131	24	pela	`-- starttest`
132			`procedure starttest(`
133			`constant num : in integer := -1;`
134			`constant name : in string;`
135	36	pela	`variable pltbv : inout pltbv_t;`
136			`signal pltbs : out pltbs_t`
137	24	pela	`);`
138			`procedure starttest(`
139			`constant name : in string;`
140	36	pela	`variable pltbv : inout pltbv_t;`
141			`signal pltbs : out pltbs_t`
142	24	pela	`);`
143
144			`-- endtest`
145			`procedure endtest(`
146	36	pela	`variable pltbv : inout pltbv_t;`
147			`signal pltbs : out pltbs_t`
148	24	pela	`);`
149
150	2	pela	`-- print, printv, print2`
151			`procedure print(`
152	6	pela	`constant active : in boolean;`
153	2	pela	`signal s : out string;`
154			`constant txt : in string`
155			`);`
156	6	pela	`procedure print(`
157			`signal s : out string;`
158			`constant txt : in string`
159			`);`
160	2	pela	`procedure printv(`
161	6	pela	`constant active : in boolean;`
162	2	pela	`variable s : out string;`
163			`constant txt : in string`
164			`);`
165			`procedure printv(`
166	6	pela	`variable s : out string;`
167			`constant txt : in string`
168			`);`
169	2	pela	`procedure print(`
170	6	pela	`constant active : in boolean;`
171	36	pela	`variable pltbv : inout pltbv_t;`
172			`signal pltbs : out pltbs_t;`
173	2	pela	`constant txt : in string`
174			`);`
175	6	pela	`procedure print(`
176	36	pela	`variable pltbv : inout pltbv_t;`
177			`signal pltbs : out pltbs_t;`
178	6	pela	`constant txt : in string`
179			`);`
180	2	pela	`procedure print2(`
181	6	pela	`constant active : in boolean;`
182	2	pela	`signal s : out string;`
183			`constant txt : in string`
184			`);`
185			`procedure print2(`
186	6	pela	`signal s : out string;`
187			`constant txt : in string`
188			`);`
189			`procedure print2(`
190			`constant active : in boolean;`
191	36	pela	`variable pltbv : inout pltbv_t;`
192			`signal pltbs : out pltbs_t;`
193	2	pela	`constant txt : in string`
194			`);`
195	6	pela	`procedure print2(`
196	36	pela	`variable pltbv : inout pltbv_t;`
197			`signal pltbs : out pltbs_t;`
198	6	pela	`constant txt : in string`
199			`);`
200	2	pela
201			`-- waitclks`
202			`procedure waitclks(`
203			`constant N : in natural;`
204			`signal clk : in std_logic;`
205	36	pela	`variable pltbv : inout pltbv_t;`
206			`signal pltbs : out pltbs_t;`
207	2	pela	`constant falling : in boolean := false;`
208			`constant timeout : in time := C_PLTBUTILS_TIMEOUT`
209			`);`
210	36	pela
211	6	pela	`-- waitsig`
212			`procedure waitsig(`
213			`signal s : in integer;`
214			`constant value : in integer;`
215			`signal clk : in std_logic;`
216	36	pela	`variable pltbv : inout pltbv_t;`
217			`signal pltbs : out pltbs_t;`
218	6	pela	`constant falling : in boolean := false;`
219			`constant timeout : in time := C_PLTBUTILS_TIMEOUT`
220			`);`
221			`procedure waitsig(`
222			`signal s : in std_logic;`
223			`constant value : in std_logic;`
224			`signal clk : in std_logic;`
225	36	pela	`variable pltbv : inout pltbv_t;`
226			`signal pltbs : out pltbs_t;`
227	6	pela	`constant falling : in boolean := false;`
228			`constant timeout : in time := C_PLTBUTILS_TIMEOUT`
229			`);`
230			`procedure waitsig(`
231			`signal s : in std_logic;`
232			`constant value : in integer;`
233			`signal clk : in std_logic;`
234	36	pela	`variable pltbv : inout pltbv_t;`
235			`signal pltbs : out pltbs_t;`
236	6	pela	`constant falling : in boolean := false;`
237			`constant timeout : in time := C_PLTBUTILS_TIMEOUT`
238	36	pela	`);`
239	6	pela	`procedure waitsig(`
240			`signal s : in std_logic_vector;`
241			`constant value : in std_logic_vector;`
242			`signal clk : in std_logic;`
243	36	pela	`variable pltbv : inout pltbv_t;`
244			`signal pltbs : out pltbs_t;`
245	6	pela	`constant falling : in boolean := false;`
246			`constant timeout : in time := C_PLTBUTILS_TIMEOUT`
247			`);`
248			`procedure waitsig(`
249			`signal s : in std_logic_vector;`
250			`constant value : in integer;`
251			`signal clk : in std_logic;`
252	36	pela	`variable pltbv : inout pltbv_t;`
253			`signal pltbs : out pltbs_t;`
254	6	pela	`constant falling : in boolean := false;`
255			`constant timeout : in time := C_PLTBUTILS_TIMEOUT`
256			`);`
257			`procedure waitsig(`
258			`signal s : in unsigned;`
259			`constant value : in unsigned;`
260			`signal clk : in std_logic;`
261	36	pela	`variable pltbv : inout pltbv_t;`
262			`signal pltbs : out pltbs_t;`
263	6	pela	`constant falling : in boolean := false;`
264			`constant timeout : in time := C_PLTBUTILS_TIMEOUT`
265	36	pela	`);`
266	6	pela	`procedure waitsig(`
267			`signal s : in unsigned;`
268			`constant value : in integer;`
269			`signal clk : in std_logic;`
270	36	pela	`variable pltbv : inout pltbv_t;`
271			`signal pltbs : out pltbs_t;`
272	6	pela	`constant falling : in boolean := false;`
273			`constant timeout : in time := C_PLTBUTILS_TIMEOUT`
274			`);`
275			`procedure waitsig(`
276			`signal s : in signed;`
277			`constant value : in signed;`
278			`signal clk : in std_logic;`
279	36	pela	`variable pltbv : inout pltbv_t;`
280			`signal pltbs : out pltbs_t;`
281	6	pela	`constant falling : in boolean := false;`
282			`constant timeout : in time := C_PLTBUTILS_TIMEOUT`
283			`);`
284			`procedure waitsig(`
285			`signal s : in signed;`
286			`constant value : in integer;`
287			`signal clk : in std_logic;`
288	36	pela	`variable pltbv : inout pltbv_t;`
289			`signal pltbs : out pltbs_t;`
290	6	pela	`constant falling : in boolean := false;`
291			`constant timeout : in time := C_PLTBUTILS_TIMEOUT`
292	36	pela	`);`
293
294	2	pela	`-- check`
295			`procedure check(`
296			`constant rpt : in string;`
297	24	pela	`constant actual : in integer;`
298	2	pela	`constant expected : in integer;`
299	36	pela	`variable pltbv : inout pltbv_t;`
300			`signal pltbs : out pltbs_t`
301			`);`
302	2	pela	`procedure check(`
303			`constant rpt : in string;`
304	24	pela	`constant actual : in std_logic;`
305	2	pela	`constant expected : in std_logic;`
306	36	pela	`variable pltbv : inout pltbv_t;`
307			`signal pltbs : out pltbs_t`
308			`);`
309	2	pela	`procedure check(`
310			`constant rpt : in string;`
311	24	pela	`constant actual : in std_logic;`
312	2	pela	`constant expected : in integer;`
313	36	pela	`variable pltbv : inout pltbv_t;`
314			`signal pltbs : out pltbs_t`
315			`);`
316	2	pela	`procedure check(`
317			`constant rpt : in string;`
318	24	pela	`constant actual : in std_logic_vector;`
319	2	pela	`constant expected : in std_logic_vector;`
320	36	pela	`variable pltbv : inout pltbv_t;`
321			`signal pltbs : out pltbs_t`
322	2	pela	`);`
323			`procedure check(`
324			`constant rpt : in string;`
325	24	pela	`constant actual : in std_logic_vector;`
326	2	pela	`constant expected : in std_logic_vector;`
327			`constant mask : in std_logic_vector;`
328	36	pela	`variable pltbv : inout pltbv_t;`
329			`signal pltbs : out pltbs_t`
330	2	pela	`);`
331			`procedure check(`
332			`constant rpt : in string;`
333	24	pela	`constant actual : in std_logic_vector;`
334	2	pela	`constant expected : in integer;`
335	36	pela	`variable pltbv : inout pltbv_t;`
336			`signal pltbs : out pltbs_t`
337			`);`
338	2	pela	`procedure check(`
339			`constant rpt : in string;`
340	24	pela	`constant actual : in std_logic_vector;`
341	2	pela	`constant expected : in integer;`
342			`constant mask : in std_logic_vector;`
343	36	pela	`variable pltbv : inout pltbv_t;`
344			`signal pltbs : out pltbs_t`
345			`);`
346	2	pela	`procedure check(`
347			`constant rpt : in string;`
348	24	pela	`constant actual : in unsigned;`
349	2	pela	`constant expected : in unsigned;`
350	36	pela	`variable pltbv : inout pltbv_t;`
351			`signal pltbs : out pltbs_t`
352	2	pela	`);`
353			`procedure check(`
354			`constant rpt : in string;`
355	24	pela	`constant actual : in unsigned;`
356	2	pela	`constant expected : in integer;`
357	36	pela	`variable pltbv : inout pltbv_t;`
358			`signal pltbs : out pltbs_t`
359			`);`
360	2	pela	`procedure check(`
361			`constant rpt : in string;`
362	24	pela	`constant actual : in signed;`
363	2	pela	`constant expected : in signed;`
364	36	pela	`variable pltbv : inout pltbv_t;`
365			`signal pltbs : out pltbs_t`
366	2	pela	`);`
367			`procedure check(`
368			`constant rpt : in string;`
369	24	pela	`constant actual : in signed;`
370	2	pela	`constant expected : in integer;`
371	36	pela	`variable pltbv : inout pltbv_t;`
372			`signal pltbs : out pltbs_t`
373			`);`
374	2	pela	`procedure check(`
375			`constant rpt : in string;`
376	88	pela	`constant actual : in string;`
377			`constant expected : in string;`
378			`variable pltbv : inout pltbv_t;`
379			`signal pltbs : out pltbs_t`
380			`);`
381			`procedure check(`
382			`constant rpt : in string;`
383	2	pela	`constant expr : in boolean;`
384	36	pela	`variable pltbv : inout pltbv_t;`
385			`signal pltbs : out pltbs_t`
386	2	pela	`);`
387	24	pela	`procedure check(`
388			`constant rpt : in string;`
389			`constant expr : in boolean;`
390			`constant actual : in string;`
391			`constant expected : in string;`
392			`constant mask : in string;`
393	36	pela	`variable pltbv : inout pltbv_t;`
394			`signal pltbs : out pltbs_t`
395	24	pela	`);`
396	36	pela
397	14	pela	`-- to_ascending`
398			`function to_ascending(`
399			`constant s : std_logic_vector`
400			`) return std_logic_vector;`
401			`function to_ascending(`
402			`constant s : unsigned`
403			`) return unsigned;`
404			`function to_ascending(`
405			`constant s : signed`
406			`) return signed;`
407	2	pela
408	14	pela	`-- to_descending`
409			`function to_descending(`
410			`constant s : std_logic_vector`
411			`) return std_logic_vector;`
412			`function to_descending(`
413			`constant s : unsigned`
414			`) return unsigned;`
415			`function to_descending(`
416			`constant s : signed`
417			`) return signed;`
418	36	pela
419	14	pela	`-- hxstr`
420			`function hxstr(`
421			`constant s : std_logic_vector;`
422	24	pela	`constant prefix : string := "";`
423			`constant postfix : string := ""`
424	14	pela	`) return string;`
425			`function hxstr(`
426			`constant s : unsigned;`
427	24	pela	`constant prefix : string := "";`
428			`constant postfix : string := ""`
429	14	pela	`) return string;`
430			`function hxstr(`
431			`constant s : signed;`
432	24	pela	`constant prefix : string := "";`
433			`constant postfix : string := ""`
434	14	pela	`) return string;`
435
436	2	pela	`-- pltbutils internal procedure(s), do not call from user's code`
437	36	pela	`procedure pltbs_update(`
438			`variable pltbv : inout pltbv_t;`
439			`signal pltbs : out pltbs_t`
440	2	pela	`);`
441	24	pela
442	36	pela	`procedure stopsim(`
443			`constant timestamp : in time`
444			`);`
445
446			`procedure pltbutils_error(`
447			`constant rpt : in string;`
448			`variable pltbv : inout pltbv_t;`
449			`signal pltbs : out pltbs_t`
450			`);`
451
452	24	pela	`procedure startsim_msg(`
453			`constant testcase_name : in string;`
454			`constant timestamp : in time`
455			`);`
456	36	pela
457	24	pela	`procedure endsim_msg(`
458			`constant testcase_name : in string;`
459			`constant timestamp : in time;`
460			`constant num_tests : in integer;`
461			`constant num_checks : in integer;`
462			`constant num_errors : in integer;`
463			`constant show_success_fail : in boolean`
464			`);`
465	36	pela
466	24	pela	`procedure starttest_msg(`
467			`constant test_num : in integer;`
468			`constant test_name : in string;`
469			`constant timestamp : in time`
470			`);`
471	36	pela
472	24	pela	`procedure endtest_msg(`
473			`constant test_num : in integer;`
474			`constant test_name : in string;`
475			`constant timestamp : in time;`
476			`constant num_checks_in_test : in integer;`
477			`constant num_errors_in_test : in integer`
478	36	pela	`);`
479
480	24	pela	`procedure check_msg(`
481			`constant rpt : in string;`
482	36	pela	`constant timestamp : in time;`
483			`constant expr : in boolean;`
484	24	pela	`constant actual : in string;`
485			`constant expected : in string;`
486			`constant mask : in string;`
487	36	pela	`constant test_num : in integer;`
488	24	pela	`constant test_name : in string;`
489			`constant check_num : in integer;`
490			`constant err_cnt_in_test : in integer`
491			`);`
492
493			`procedure error_msg(`
494			`constant rpt : in string;`
495			`constant timestamp : in time;`
496	36	pela	`constant test_num : in integer;`
497	24	pela	`constant test_name : in string;`
498			`constant err_cnt_in_test : in integer`
499			`);`
500	36	pela

Browse

Tools

Subversion Repositories pltbutils

[/] [pltbutils/] [trunk/] [src/] [vhdl/] [pltbutils_func_pkg.vhd] - Blame information for rev 95