Subversion Repositories potato

# Demo design for the Nexys 4 board

This folder contains a design for a simple demo design using the Potato

processor. It has been tested using Vivado 2014.4.

## Quick Start

In order to use the design, first import all source files from the folders

`src/`, `soc/` and `example/` into your project. Make sure the testbench files

(the files starting with "tb_") is added as simulation-only files.

### Clocking

Add a clock generator using the Clocking Wizard. To seamlessly integrate

it into the design, name it "clock_generator". Choose the following options:

* Frequency Synthesis

* Safe Clock Startup

Set up two output clocks, `clk_out1` with frequency 60 MHz, and `clk_out2` with

a frequency of 10 MHz. Rename the corresponding ports to `system_clk` and

`timer_clk` respectively. Name the input clock `clk`.

### Instruction memory

Add a block RAM to use as instruction ROM using the Block Memory Generator.

Choose "Single Port ROM" as memory type, name it "instruction_rom" and set

port A width to 32 bits and port A depth to 2048. Initialize it with your

application binary and, optionally, fill the remaining memory locations with

0x00000013 (no-operation opcode).

### Test it!

Now you can test it and hopefully it works :-)