URL https://opencores.org/ocsvn/raytrac/raytrac/trunk

Subversion Repositories raytrac

[/] [raytrac/] [branches/] [fp_sgdma/] [ap_n_dpc.vhd] - Blame information for rev 237

Go to most recent revision | Details | Compare with Previous | View Log


--! @file ap_n_dpc.vhd
--! @brief Decodificador de operaci&eacute;n. Sistema de decodificación de los \kdatapaths, cuyo objetivo es a partir del par&acute;ametro de entrada DCS.\nSon 4 las posibles configuraciones de \kdatapaths que existen. Los valores de los bits DC son los que determinan y decodifican la interconexi&oacute;n entre los componentes aritm&eacute;ticos. El componente S determina el signo de la operaci&oacute;n cuando es una suma la que operaci&oacute;n se es&eacutea; ejecutando en el momento.  
--! @author Juli&aacute;n Andr&eacute;s Guar&iacute;n Reyes
--------------------------------------------------------------
-- RAYTRAC
-- Author Julian Andres Guarin
-- ap_n_dpc.vhd
-- This file is part of raytrac.
-- 
--     raytrac is free software: you can redistribute it and/or modify
--     it under the terms of the GNU General Public License as published by
--     the Free Software Foundation, either version 3 of the License, or
--     (at your option) any later version.
-- 
--     raytrac is distributed in the hope that it will be useful,
--     but WITHOUT ANY WARRANTY; without even the implied warranty of
--     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
--     GNU General Public License for more details.
-- 
--     You should have received a copy of the GNU General Public License
--     along with raytrac.  If not, see <http://www.gnu.org/licenses/>.
 
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
use work.arithpack.all;
 
library altera_mf;
use altera_mf.altera_mf_components.all;
 
 
entity ap_n_dpc is
 
        port (
 
                clk                                             : in    std_logic;
                rst                                             : in    std_logic;
 
                ax                                              : in    std_logic_vector(31 downto 0);
                ay                                              : in    std_logic_vector(31 downto 0);
                az                                              : in    std_logic_vector(31 downto 0);
                bx                                              : in    std_logic_vector(31 downto 0);
                by                                              : in    std_logic_vector(31 downto 0);
                bz                                              : in    std_logic_vector(31 downto 0);
                vx                                              : out   std_logic_vector(31 downto 0);
                vy                                              : out   std_logic_vector(31 downto 0);
                vz                                              : out   std_logic_vector(31 downto 0);
                sc                                              : out   std_logic_vector(31 downto 0);
                ack                                             : in    std_logic;
                empty                                   : out   std_logic;
 
                 --paraminput                           : in    vectorblock06;  --! Vectores A,B
 
                dcs                                             : in    std_logic_vector(2 downto 0);            --! Bit con el identificador del bloque AB vs CD e identificador del sub bloque (A/B) o (C/D). 
 
                sync_chain_1                    : in    std_logic;              --! Se&ntilde;al de dato valido que se va por toda la cadena de sincronizacion.
                pipeline_pending                : out   std_logic               --! Se&ntilde;al para indicar si hay datos en el pipeline aritm&eacute;tico.    
 
 
 
                --qresult_d                             : out   vectorblock04   --! 4 salidas de resultados, pues lo m&aacute;ximo que podr&aacute; calcularse por cada clock son 2 vectores. 
 
 
 
        );
end entity;
 
architecture ap_n_dpc_arch of ap_n_dpc is
        --!Constantes de apoyo
        constant ssync_chain_max : integer :=27;
        constant ssync_chain_min : integer :=2;
 
        --! Tunnning delay
        constant adder2_delay: integer := 1;
        constant prod3_delay : integer := 2;
 
        --!TBXSTART:FACTORS_N_ADDENDS
        signal sfactor0         : std_logic_vector(31 downto 0);
        signal sfactor1         : std_logic_vector(31 downto 0);
        signal sfactor2         : std_logic_vector(31 downto 0);
        signal sfactor3         : std_logic_vector(31 downto 0);
        signal sfactor4         : std_logic_vector(31 downto 0);
        signal sfactor5         : std_logic_vector(31 downto 0);
        signal sfactor6         : std_logic_vector(31 downto 0);
        signal sfactor7         : std_logic_vector(31 downto 0);
        signal sfactor8         : std_logic_vector(31 downto 0);
        signal sfactor9         : std_logic_vector(31 downto 0);
        signal sfactor10        : std_logic_vector(31 downto 0);
        signal sfactor11        : std_logic_vector(31 downto 0);
        --signal sfactor                : vectorblock12;
 
        signal ssumando0        : std_logic_vector(31 downto 0);
        signal ssumando1        : std_logic_vector(31 downto 0);
        signal ssumando2        : std_logic_vector(31 downto 0);
        signal ssumando3        : std_logic_vector(31 downto 0);
        signal ssumando4        : std_logic_vector(31 downto 0);
        signal ssumando5        : std_logic_vector(31 downto 0);
        --signal ssumando               : vectorblock06;
 
        signal sq0_q            : std_logic_vector(31 downto 0);
        --!TBXEND
 
 
        --!TBXSTART:ARITHMETIC_RESULTS
 
        signal sp0                      : std_logic_vector(31 downto 0);
        signal sp1                      : std_logic_vector(31 downto 0);
        signal sp2                      : std_logic_vector(31 downto 0);
        signal sp3                      : std_logic_vector(31 downto 0);
        signal sp4                      : std_logic_vector(31 downto 0);
        signal sp5                      : std_logic_vector(31 downto 0);
        --signal sprd32blk      : vectorblock06;
 
        signal sa0                      : std_logic_vector(31 downto 0);
        signal sa1                      : std_logic_vector(31 downto 0);
        signal sa2                      : std_logic_vector(31 downto 0);
 
        --signal sadd32blk      : vectorblock03;
 
        signal ssq32    : std_logic_vector(31 downto 0);
        signal sinv32   : std_logic_vector(31 downto 0);
 
        signal sqx_q            : std_logic_vector(31 downto 0);
        signal sqy_q            : std_logic_vector(31 downto 0);
        signal sqz_q            : std_logic_vector(31 downto 0);
        --signal sqxyz_q                : vectorblock03;
 
        signal sq1_e            : std_logic;
        --!TBXEND
 
 
        --!TBXSTART:SYNC_CHAIN
        signal ssync_chain      : std_logic_vector(ssync_chain_max downto ssync_chain_min);
        --!TBXEND
 
        --signal qxyzd          : std_logic_vector(95 downto 0);
 
        --signal qxyzq          : std_logic_vector(95 downto 0);
 
        signal sq2_d            : std_logic_vector(31 downto 0);
        signal sq2_q            : std_logic_vector(31 downto 0);
        signal sq2_w            : std_logic;
        signal sq2_e            : std_logic;
 
        signal sqr_e            : std_logic;
        signal sqr_w            : std_logic;            --! Salidas de escritura y lectura en las colas de resultados.
        signal sqr_dx           : std_logic_vector(31 downto 0);
        signal sqr_dy           : std_logic_vector(31 downto 0);
        signal sqr_dz           : std_logic_vector(31 downto 0);
        signal sqr_dsc          : std_logic_vector(31 downto 0);
 
 
 
        signal sa0o                     : std_logic_vector(31 downto 0);
        signal sa1o                     : std_logic_vector(31 downto 0);
        signal sa2o                     : std_logic_vector(31 downto 0);
        --signal sadd32blko     : vectorblock03;        --! Salidas de los 3 sumadores.
 
        signal sp0o                     : std_logic_vector(31 downto 0);
        signal sp1o                     : std_logic_vector(31 downto 0);
        signal sp2o                     : std_logic_vector(31 downto 0);
        signal sp3o                     : std_logic_vector(31 downto 0);
        signal sp4o                     : std_logic_vector(31 downto 0);
        signal sp5o                     : std_logic_vector(31 downto 0);
        --signal sprd32blko     : vectorblock06;        --! Salidas de los 6 multiplicadores.
 
        signal sinv32o  : std_logic_vector(31 downto 0);         --! Salidas de la raiz cuadradas y el inversor.
        signal ssq32o   : std_logic_vector(31 downto 0);         --! Salidas de la raiz cuadradas y el inversor.
 
        --! Bloque Aritmetico de Sumadores y Multiplicadores (madd)
        component arithblock
        port (
 
                clk     : in std_logic;
                rst : in std_logic;
 
                sign            : in std_logic;
 
                factor0         : in std_logic_vector(31 downto 0);
                factor1         : in std_logic_vector(31 downto 0);
                factor2         : in std_logic_vector(31 downto 0);
                factor3         : in std_logic_vector(31 downto 0);
                factor4         : in std_logic_vector(31 downto 0);
                factor5         : in std_logic_vector(31 downto 0);
                factor6         : in std_logic_vector(31 downto 0);
                factor7         : in std_logic_vector(31 downto 0);
                factor8         : in std_logic_vector(31 downto 0);
                factor9         : in std_logic_vector(31 downto 0);
                factor10        : in std_logic_vector(31 downto 0);
                factor11        : in std_logic_vector(31 downto 0);
                --prd32blki     : in vectorblock06;
 
                sumando0        : in std_logic_vector(31 downto 0);
                sumando1        : in std_logic_vector(31 downto 0);
                sumando2        : in std_logic_vector(31 downto 0);
                sumando3        : in std_logic_vector(31 downto 0);
                sumando4        : in std_logic_vector(31 downto 0);
                sumando5        : in std_logic_vector(31 downto 0);
                --add32blki     : in vectorblock06;
 
                a0                      : out std_logic_vector(31 downto 0);
                a1                      : out std_logic_vector(31 downto 0);
                a2                      : out std_logic_vector(31 downto 0);
                --add32blko     : out vectorblock03;
 
                p0                      : out std_logic_vector(31 downto 0);
                p1                      : out std_logic_vector(31 downto 0);
                p2                      : out std_logic_vector(31 downto 0);
                p3                      : out std_logic_vector(31 downto 0);
                p4                      : out std_logic_vector(31 downto 0);
                p5                      : out std_logic_vector(31 downto 0);
                --prd32blko     : out vectorblock06;
 
                sq32o           : out std_logic_vector(31 downto 0);
                inv32o          : out std_logic_vector(31 downto 0)
 
        );
        end component;
 
begin
 
        --! Bloque Aritm&eacute;tico
        ap : arithblock
        port map (
                clk             => clk,
                rst                     => rst,
 
                sign            => dcs(0),
 
                factor0 =>sfactor0,
                factor1 =>sfactor1,
                factor2 =>sfactor2,
                factor3 =>sfactor3,
                factor4 =>sfactor4,
                factor5 =>sfactor5,
                factor6 =>sfactor6,
                factor7 =>sfactor7,
                factor8 =>sfactor8,
                factor9 =>sfactor9,
                factor10=>sfactor10,
                factor11=>sfactor11,
                --prd32blki     => sfactor,
 
                sumando0=>ssumando0,
                sumando1=>ssumando1,
                sumando2=>ssumando2,
                sumando3=>ssumando3,
                sumando4=>ssumando4,
                sumando5=>ssumando5,
                --add32blki     => ssumando,
 
                a0=>sa0o,
                a1=>sa1o,
                a2=>sa2o,
                --add32blko     => sadd32blko, 
 
                p0=>sp0o,
                p1=>sp1o,
                p2=>sp2o,
                p3=>sp3o,
                p4=>sp4o,
                p5=>sp5o,
                --prd32blko     => sprd32blko,
 
                sq32o=> ssq32o,
                inv32o=> sinv32o
        );
 
        --! Cadena de sincronizaci&oacute;n: 29 posiciones.
        pipeline_pending <= sync_chain_1 or not(sq2_e) or not(sq1_e) or not(sqr_e);
        empty <= sqr_e;
        sync_chain_proc:
        process(clk,rst,sync_chain_1)
        begin
                if rst=rstMasterValue then
                        ssync_chain(ssync_chain_max downto ssync_chain_min) <= (others => '0');
 
                elsif clk'event and clk='1' then
                        for i in ssync_chain_max downto ssync_chain_min+1 loop
                                ssync_chain(i) <= ssync_chain(i-1);
                        end loop;
                        ssync_chain(ssync_chain_min) <= sync_chain_1;
                end if;
        end process sync_chain_proc;
 
 
 
 
 
        --! El siguiente c&oacute;digo sirve para conectar arreglos a se&ntilde;ales std_logic_1164, son abstracciones de c&oacute;digo tambi&eacute;n, sin embargo se realizan a trav&eacute;s de registros. 
        register_products_outputs:
        process (clk)
        begin
                if clk'event and clk='1' then
                        sp0 <= sp0o;
                        sp1 <= sp1o;
                        sp2 <= sp2o;
                        sp3 <= sp3o;
                        sp4 <= sp4o;
                        sp5 <= sp5o;
                        sa0 <= sa0o;
                        sa1 <= sa1o;
                        sa2 <= sa2o;
                        sinv32 <= sinv32o;
                        ssq32 <= ssq32o;
                end if;
        end process;
 
        --! Decodificaci&oacute;n del Datapath.
        datapathproc:process(dcs,ax,bx,ay,by,az,bz,sinv32,sp0,sp1,sp2,sp3,sp4,sp5,sa0,sa1,sa2,sq0_q,sqx_q,sqy_q,sqz_q,ssync_chain,ssq32,sq2_q)
        begin
 
                case dcs is
                        when "011"  =>
 
                                sq2_w <= '0';
                                sq2_d <= ssq32;
 
                                sfactor0 <= ay;
                                sfactor1 <= bz;
                                sfactor2 <= az;
                                sfactor3 <= by;
                                sfactor4 <= az;
                                sfactor5 <= bx;
                                sfactor6 <= ax;
                                sfactor7 <= bz;
                                sfactor8 <= ax;
                                sfactor9 <= by;
                                sfactor10 <= ay;
                                sfactor11 <= bx;
 
                                ssumando0 <= sp0;
                                ssumando1 <= sp1;
                                ssumando2 <= sp2;
                                ssumando3 <= sp3;
                                ssumando4 <= sp4;
                                ssumando5 <= sp5;
 
                                sqr_dx <= sa0;
                                sqr_dy <= sa1;
                                sqr_dz <= sa2;
 
                                sqr_w <= ssync_chain(13+adder2_delay);
 
                        when"000"|"001" =>
 
                                sq2_w <= '0';
                                sq2_d <= ssq32;
 
                                sfactor0 <= ay;
                                sfactor1 <= bz;
                                sfactor2 <= az;
                                sfactor3 <= by;
                                sfactor4 <= az;
                                sfactor5 <= bx;
                                sfactor6 <= ax;
                                sfactor7 <= bz;
                                sfactor8 <= ax;
                                sfactor9 <= by;
                                sfactor10 <= ay;
                                sfactor11 <= bx;
 
 
                                ssumando0 <= ax;
                                ssumando1 <= bx;
                                ssumando2 <= ay;
                                ssumando3 <= by;
                                ssumando4 <= az;
                                ssumando5 <= bz;
 
                                sqr_dx <= sa0;
                                sqr_dy <= sa1;
                                sqr_dz <= sa2;
 
                                sqr_w <= ssync_chain(9+adder2_delay);
 
                        when"110" |"100" =>
 
 
 
                                sfactor0 <= ax;
                                sfactor1 <= bx;
                                sfactor2 <= ay;
                                sfactor3 <= by;
                                sfactor4 <= az;
                                sfactor5 <= bz;
 
                                sfactor6 <= sinv32;
                                sfactor7 <= sqx_q;
                                sfactor8 <= sinv32;
                                sfactor9 <= sqy_q;
                                sfactor10 <= sinv32;
                                sfactor11 <= sqz_q;
 
 
                                ssumando0 <= sp0;
                                ssumando1 <= sp1;
                                ssumando2 <= sa0;
                                ssumando3 <= sq0_q;
                                ssumando4 <= az;
                                ssumando5 <= bz;
 
                                if dcs(1)='1' then
                                        sq2_d <= ssq32;
                                        sq2_w <= ssync_chain(22);
                                else
                                        sq2_d <= sa1;
                                        sq2_w <= ssync_chain(21);
                                end if;
 
                                sqr_dx <= sp3;
                                sqr_dy <= sp4;
                                sqr_dz <= sp5;
 
                                sqr_w <= ssync_chain(27);
 
                        when others =>
 
                                sq2_w <= '0';
                                sq2_d <= ssq32;
 
                                sfactor0 <= ax;
                                sfactor1 <= bx;
                                sfactor2 <= ay;
                                sfactor3 <= by;
                                sfactor4 <= az;
                                sfactor5 <= bz;
 
                                sfactor6 <= ax;
                                sfactor7 <= bx;
                                sfactor8 <= ay;
                                sfactor9 <= by;
                                sfactor10 <= az;
                                sfactor11 <= bz;
 
                                ssumando0 <= sp0;
                                ssumando1 <= sp1;
                                ssumando2 <= sa0;
                                ssumando3 <= sq0_q;
                                ssumando4 <= az;
                                ssumando5 <= bz;
 
                                sqr_dx <= sp3;
                                sqr_dy <= sp4;
                                sqr_dz <= sp5;
 
                                sqr_w <= ssync_chain(5);
 
                end case;
 
 
 
 
        end process;
 
        --! Colas internas de producto punto, ubicada en el pipe line aritm&eacute;co. Paralelo a los sumadores a0 y a2.  
        q0 : scfifo --! Debe ir registrada la salida.
        generic map (
                allow_rwcycle_when_full => "ON",
                lpm_widthu                              => 4,
                lpm_numwords                    => 16,
                lpm_showahead                   => "ON",
                lpm_width                               => 32,
                overflow_checking               => "ON",
                underflow_checking              => "ON",
                use_eab                                 => "ON"
        )
        port    map (
                sclr            => '0',
                clock           => clk,
                rdreq           => ssync_chain(13),
                wrreq           => ssync_chain(5+adder2_delay),
                data            => sp2,
                q                       => sq0_q
        );
        --! Colas internas de producto punto, ubicada en el pipe line aritm&eacute;co. Paralelo a los sumadores a0 y a2.  
        q2 : scfifo --! Debe ir registrada la salida.
        generic map (
                allow_rwcycle_when_full => "ON",
                lpm_widthu                              => 4,
                lpm_numwords                    => 16,
                lpm_showahead                   => "ON",
                lpm_type                                => "SCIFIFO",
                lpm_width                               => 32,
                overflow_checking               => "ON",
                underflow_checking              => "ON",
                use_eab                                 => "ON"
        )
        port map (
                rdreq           => ssync_chain(27),
                sclr            => '0',
                clock           => clk,
                empty           => sq2_e,
                q                       => sqr_dsc,
                wrreq           => sq2_w,
                data            => sq2_d
        );
 
        --! Cola interna de normalizaci&oacute;n de vectores, ubicada entre el pipeline aritm&eacute;tico
        qx : scfifo
        generic map (
                allow_rwcycle_when_full => "ON",
                lpm_widthu                              => 5,
                lpm_numwords                    => 32,
                lpm_showahead                   => "ON",
                lpm_width                               => 32,
                overflow_checking               => "ON",
                underflow_checking              => "ON",
                use_eab                                 => "ON"
        )
        port    map (
                aclr            => '0',
                clock           => clk,
                empty           => sq1_e,
                rdreq           => ssync_chain(23),
                wrreq           => sync_chain_1,
                data            => ax,
                q                       => sqx_q
        );
        qy : scfifo
        generic map (
                allow_rwcycle_when_full => "ON",
                lpm_widthu                              => 5,
                lpm_numwords                    => 32,
                lpm_showahead                   => "ON",
                lpm_width                               => 32,
                overflow_checking               => "ON",
                underflow_checking              => "ON",
                use_eab                                 => "ON"
        )
        port    map (
                aclr            => '0',
                clock           => clk,
                rdreq           => ssync_chain(23),
                wrreq           => sync_chain_1,
                data            => ay,
                q                       => sqy_q
        );
        qz : scfifo
        generic map (
                allow_rwcycle_when_full => "ON",
                lpm_widthu                              => 5,
                lpm_numwords                    => 32,
                lpm_showahead                   => "ON",
                lpm_width                               => 32,
                overflow_checking               => "ON",
                underflow_checking              => "ON",
                use_eab                                 => "ON"
        )
        port    map (
                aclr            => '0',
                clock           => clk,
                rdreq           => ssync_chain(23),
                wrreq           => sync_chain_1,
                data            => az,
                q                       => sqz_q
        );
--!***********************************************************************************************************
--!Q RESULT
--!***********************************************************************************************************
 
        --Colas de resultados
        rx : scfifo
        generic map (
                allow_rwcycle_when_full => "ON",
                lpm_widthu                              => 5,
                lpm_numwords                    => 32,
                lpm_showahead                   => "ON",
                lpm_width                               => 32,
                overflow_checking               => "ON",
                underflow_checking              => "ON",
                use_eab                                 => "ON"
        )
        port    map (
                aclr            => '0',
                clock           => clk,
                empty           => sqr_e,
                rdreq           => ack,
                wrreq           => sqr_w,
                data            => sqr_dx,
                q                       => vx
        );
        ry : scfifo
        generic map (
                allow_rwcycle_when_full => "ON",
                lpm_widthu                              => 5,
                lpm_numwords                    => 32,
                lpm_showahead                   => "ON",
                lpm_width                               => 32,
                overflow_checking               => "ON",
                underflow_checking              => "ON",
                use_eab                                 => "ON"
        )
        port    map (
                aclr            => '0',
                clock           => clk,
                rdreq           => ack,
                wrreq           => sqr_w,
                data            => sqr_dy,
                q                       => vy
        );
        rz : scfifo
        generic map (
                allow_rwcycle_when_full => "ON",
                lpm_widthu                              => 5,
                lpm_numwords                    => 32,
                lpm_showahead                   => "ON",
                lpm_width                               => 32,
                overflow_checking               => "ON",
                underflow_checking              => "ON",
                use_eab                                 => "ON"
        )
        port    map (
                aclr            => '0',
                clock           => clk,
                rdreq           => ack,
                wrreq           => sqr_w,
                data            => sqr_dz,
                q                       => vz
        );
        rsc : scfifo
        generic map (
                allow_rwcycle_when_full => "ON",
                lpm_widthu                              => 5,
                lpm_numwords                    => 32,
                lpm_showahead                   => "ON",
                lpm_width                               => 32,
                overflow_checking               => "ON",
                underflow_checking              => "ON",
                use_eab                                 => "ON"
        )
        port    map (
                aclr            => '0',
                clock           => clk,
                rdreq           => ack,
                wrreq           => sqr_w,
                data            => sqr_dsc,
                q                       => sc
        );
 
 
end architecture;

Line No.	Rev	Author	Line
1	219	jguarin200	`--! @file ap_n_dpc.vhd`
2	196	jguarin200	`--! @brief Decodificador de operacién. Sistema de decodificación de los \kdatapaths, cuyo objetivo es a partir del par´ametro de entrada DCS.\nSon 4 las posibles configuraciones de \kdatapaths que existen. Los valores de los bits DC son los que determinan y decodifican la interconexión entre los componentes aritméticos. El componente S determina el signo de la operación cuando es una suma la que operación se es&eacutea; ejecutando en el momento.`
3	128	jguarin200	`--! @author Julián Andrés Guarín Reyes`
4	122	jguarin200	`--------------------------------------------------------------`
5			`-- RAYTRAC`
6			`-- Author Julian Andres Guarin`
7	219	jguarin200	`-- ap_n_dpc.vhd`
8	122	jguarin200	`-- This file is part of raytrac.`
9			`--`
10			`-- raytrac is free software: you can redistribute it and/or modify`
11			`-- it under the terms of the GNU General Public License as published by`
12			`-- the Free Software Foundation, either version 3 of the License, or`
13			`-- (at your option) any later version.`
14			`--`
15			`-- raytrac is distributed in the hope that it will be useful,`
16			`-- but WITHOUT ANY WARRANTY; without even the implied warranty of`
17			`-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
18			`-- GNU General Public License for more details.`
19			`--`
20			`-- You should have received a copy of the GNU General Public License`
21			`-- along with raytrac. If not, see <http://www.gnu.org/licenses/>.`
22
23			`library ieee;`
24			`use ieee.std_logic_1164.all;`
25	212	jguarin200	`use ieee.std_logic_unsigned.all;`
26	151	jguarin200	`use work.arithpack.all;`
27	134	jguarin200
28	212	jguarin200	`library altera_mf;`
29			`use altera_mf.altera_mf_components.all;`
30	158	jguarin200
31	212	jguarin200
32	219	jguarin200	`entity ap_n_dpc is`
33	152	jguarin200
34	122	jguarin200	`port (`
35	229	jguarin200
36	204	jguarin200	`clk : in std_logic;`
37			`rst : in std_logic;`
38
39	229	jguarin200	`ax : in std_logic_vector(31 downto 0);`
40			`ay : in std_logic_vector(31 downto 0);`
41			`az : in std_logic_vector(31 downto 0);`
42			`bx : in std_logic_vector(31 downto 0);`
43			`by : in std_logic_vector(31 downto 0);`
44			`bz : in std_logic_vector(31 downto 0);`
45			`vx : out std_logic_vector(31 downto 0);`
46			`vy : out std_logic_vector(31 downto 0);`
47			`vz : out std_logic_vector(31 downto 0);`
48			`sc : out std_logic_vector(31 downto 0);`
49			`ack : in std_logic;`
50			`empty : out std_logic;`
51	204	jguarin200
52	229	jguarin200	`--paraminput : in vectorblock06; --! Vectores A,B`
53	204	jguarin200
54	229	jguarin200	`dcs : in std_logic_vector(2 downto 0); --! Bit con el identificador del bloque AB vs CD e identificador del sub bloque (A/B) o (C/D).`
55
56	212	jguarin200	`sync_chain_1 : in std_logic; --! Señal de dato valido que se va por toda la cadena de sincronizacion.`
57	229	jguarin200	`pipeline_pending : out std_logic --! Señal para indicar si hay datos en el pipeline aritmético.`
58	204	jguarin200
59	229	jguarin200
60
61			`--qresult_d : out vectorblock04 --! 4 salidas de resultados, pues lo máximo que podrá calcularse por cada clock son 2 vectores.`
62
63	204	jguarin200
64
65	122	jguarin200	`);`
66	153	jguarin200	`end entity;`
67	122	jguarin200
68	219	jguarin200	`architecture ap_n_dpc_arch of ap_n_dpc is`
69	228	jguarin200	`--!Constantes de apoyo`
70			`constant ssync_chain_max : integer :=27;`
71			`constant ssync_chain_min : integer :=2;`
72	125	jguarin200
73	235	jguarin200	`--! Tunnning delay`
74			`constant adder2_delay: integer := 1;`
75	236	jguarin200	`constant prod3_delay : integer := 2;`
76	228	jguarin200
77	161	jguarin200	`--!TBXSTART:FACTORS_N_ADDENDS`
78	229	jguarin200	`signal sfactor0 : std_logic_vector(31 downto 0);`
79			`signal sfactor1 : std_logic_vector(31 downto 0);`
80			`signal sfactor2 : std_logic_vector(31 downto 0);`
81			`signal sfactor3 : std_logic_vector(31 downto 0);`
82			`signal sfactor4 : std_logic_vector(31 downto 0);`
83			`signal sfactor5 : std_logic_vector(31 downto 0);`
84			`signal sfactor6 : std_logic_vector(31 downto 0);`
85			`signal sfactor7 : std_logic_vector(31 downto 0);`
86			`signal sfactor8 : std_logic_vector(31 downto 0);`
87			`signal sfactor9 : std_logic_vector(31 downto 0);`
88			`signal sfactor10 : std_logic_vector(31 downto 0);`
89			`signal sfactor11 : std_logic_vector(31 downto 0);`
90			`--signal sfactor : vectorblock12;`
91
92			`signal ssumando0 : std_logic_vector(31 downto 0);`
93			`signal ssumando1 : std_logic_vector(31 downto 0);`
94			`signal ssumando2 : std_logic_vector(31 downto 0);`
95			`signal ssumando3 : std_logic_vector(31 downto 0);`
96			`signal ssumando4 : std_logic_vector(31 downto 0);`
97			`signal ssumando5 : std_logic_vector(31 downto 0);`
98			`--signal ssumando : vectorblock06;`
99
100			`signal sq0_q : std_logic_vector(31 downto 0);`
101	161	jguarin200	`--!TBXEND`
102	163	jguarin200
103
104			`--!TBXSTART:ARITHMETIC_RESULTS`
105	229	jguarin200
106			`signal sp0 : std_logic_vector(31 downto 0);`
107			`signal sp1 : std_logic_vector(31 downto 0);`
108			`signal sp2 : std_logic_vector(31 downto 0);`
109			`signal sp3 : std_logic_vector(31 downto 0);`
110			`signal sp4 : std_logic_vector(31 downto 0);`
111			`signal sp5 : std_logic_vector(31 downto 0);`
112			`--signal sprd32blk : vectorblock06;`
113
114			`signal sa0 : std_logic_vector(31 downto 0);`
115			`signal sa1 : std_logic_vector(31 downto 0);`
116			`signal sa2 : std_logic_vector(31 downto 0);`
117
118			`--signal sadd32blk : vectorblock03;`
119
120			`signal ssq32 : std_logic_vector(31 downto 0);`
121			`signal sinv32 : std_logic_vector(31 downto 0);`
122
123			`signal sqx_q : std_logic_vector(31 downto 0);`
124			`signal sqy_q : std_logic_vector(31 downto 0);`
125			`signal sqz_q : std_logic_vector(31 downto 0);`
126			`--signal sqxyz_q : vectorblock03;`
127
128			`signal sq1_e : std_logic;`
129	163	jguarin200	`--!TBXEND`
130
131	160	jguarin200
132			`--!TBXSTART:SYNC_CHAIN`
133	228	jguarin200	`signal ssync_chain : std_logic_vector(ssync_chain_max downto ssync_chain_min);`
134	171	jguarin200	`--!TBXEND`
135	212	jguarin200
136	229	jguarin200	`--signal qxyzd : std_logic_vector(95 downto 0);`
137
138			`--signal qxyzq : std_logic_vector(95 downto 0);`
139
140	228	jguarin200	`signal sq2_d : std_logic_vector(31 downto 0);`
141			`signal sq2_q : std_logic_vector(31 downto 0);`
142			`signal sq2_w : std_logic;`
143			`signal sq2_e : std_logic;`
144	219	jguarin200
145	229	jguarin200	`signal sqr_e : std_logic;`
146			`signal sqr_w : std_logic; --! Salidas de escritura y lectura en las colas de resultados.`
147			`signal sqr_dx : std_logic_vector(31 downto 0);`
148			`signal sqr_dy : std_logic_vector(31 downto 0);`
149			`signal sqr_dz : std_logic_vector(31 downto 0);`
150			`signal sqr_dsc : std_logic_vector(31 downto 0);`
151
152	219	jguarin200
153
154	229	jguarin200	`signal sa0o : std_logic_vector(31 downto 0);`
155			`signal sa1o : std_logic_vector(31 downto 0);`
156			`signal sa2o : std_logic_vector(31 downto 0);`
157			`--signal sadd32blko : vectorblock03; --! Salidas de los 3 sumadores.`
158	163	jguarin200
159	229	jguarin200	`signal sp0o : std_logic_vector(31 downto 0);`
160			`signal sp1o : std_logic_vector(31 downto 0);`
161			`signal sp2o : std_logic_vector(31 downto 0);`
162			`signal sp3o : std_logic_vector(31 downto 0);`
163			`signal sp4o : std_logic_vector(31 downto 0);`
164			`signal sp5o : std_logic_vector(31 downto 0);`
165			`--signal sprd32blko : vectorblock06; --! Salidas de los 6 multiplicadores.`
166
167			`signal sinv32o : std_logic_vector(31 downto 0); --! Salidas de la raiz cuadradas y el inversor.`
168			`signal ssq32o : std_logic_vector(31 downto 0); --! Salidas de la raiz cuadradas y el inversor.`
169
170	219	jguarin200	`--! Bloque Aritmetico de Sumadores y Multiplicadores (madd)`
171			`component arithblock`
172			`port (`
173
174			`clk : in std_logic;`
175			`rst : in std_logic;`
176
177			`sign : in std_logic;`
178	229	jguarin200
179			`factor0 : in std_logic_vector(31 downto 0);`
180			`factor1 : in std_logic_vector(31 downto 0);`
181			`factor2 : in std_logic_vector(31 downto 0);`
182			`factor3 : in std_logic_vector(31 downto 0);`
183			`factor4 : in std_logic_vector(31 downto 0);`
184			`factor5 : in std_logic_vector(31 downto 0);`
185			`factor6 : in std_logic_vector(31 downto 0);`
186			`factor7 : in std_logic_vector(31 downto 0);`
187			`factor8 : in std_logic_vector(31 downto 0);`
188			`factor9 : in std_logic_vector(31 downto 0);`
189			`factor10 : in std_logic_vector(31 downto 0);`
190			`factor11 : in std_logic_vector(31 downto 0);`
191			`--prd32blki : in vectorblock06;`
192	219	jguarin200
193	229	jguarin200	`sumando0 : in std_logic_vector(31 downto 0);`
194			`sumando1 : in std_logic_vector(31 downto 0);`
195			`sumando2 : in std_logic_vector(31 downto 0);`
196			`sumando3 : in std_logic_vector(31 downto 0);`
197			`sumando4 : in std_logic_vector(31 downto 0);`
198			`sumando5 : in std_logic_vector(31 downto 0);`
199			`--add32blki : in vectorblock06;`
200	219	jguarin200
201	229	jguarin200	`a0 : out std_logic_vector(31 downto 0);`
202			`a1 : out std_logic_vector(31 downto 0);`
203			`a2 : out std_logic_vector(31 downto 0);`
204			`--add32blko : out vectorblock03;`
205	219	jguarin200
206	229	jguarin200	`p0 : out std_logic_vector(31 downto 0);`
207			`p1 : out std_logic_vector(31 downto 0);`
208			`p2 : out std_logic_vector(31 downto 0);`
209			`p3 : out std_logic_vector(31 downto 0);`
210			`p4 : out std_logic_vector(31 downto 0);`
211			`p5 : out std_logic_vector(31 downto 0);`
212			`--prd32blko : out vectorblock06;`
213
214			`sq32o : out std_logic_vector(31 downto 0);`
215			`inv32o : out std_logic_vector(31 downto 0)`
216	219	jguarin200
217			`);`
218			`end component;`
219
220	123	jguarin200	`begin`
221	204	jguarin200
222	219	jguarin200	`--! Bloque Aritmético`
223			`ap : arithblock`
224			`port map (`
225			`clk => clk,`
226			`rst => rst,`
227	204	jguarin200
228	229	jguarin200	`sign => dcs(0),`
229	219	jguarin200
230	229	jguarin200	`factor0 =>sfactor0,`
231			`factor1 =>sfactor1,`
232			`factor2 =>sfactor2,`
233			`factor3 =>sfactor3,`
234			`factor4 =>sfactor4,`
235			`factor5 =>sfactor5,`
236			`factor6 =>sfactor6,`
237			`factor7 =>sfactor7,`
238			`factor8 =>sfactor8,`
239			`factor9 =>sfactor9,`
240			`factor10=>sfactor10,`
241			`factor11=>sfactor11,`
242			`--prd32blki => sfactor,`
243
244			`sumando0=>ssumando0,`
245			`sumando1=>ssumando1,`
246			`sumando2=>ssumando2,`
247			`sumando3=>ssumando3,`
248			`sumando4=>ssumando4,`
249			`sumando5=>ssumando5,`
250			`--add32blki => ssumando,`
251	219	jguarin200
252	229	jguarin200	`a0=>sa0o,`
253			`a1=>sa1o,`
254			`a2=>sa2o,`
255			`--add32blko => sadd32blko,`
256	219	jguarin200
257	229	jguarin200	`p0=>sp0o,`
258			`p1=>sp1o,`
259			`p2=>sp2o,`
260			`p3=>sp3o,`
261			`p4=>sp4o,`
262			`p5=>sp5o,`
263			`--prd32blko => sprd32blko,`
264
265			`sq32o=> ssq32o,`
266			`inv32o=> sinv32o`
267	219	jguarin200	`);`
268	122	jguarin200
269	142	jguarin200	`--! Cadena de sincronización: 29 posiciones.`
270	229	jguarin200	`pipeline_pending <= sync_chain_1 or not(sq2_e) or not(sq1_e) or not(sqr_e);`
271			`empty <= sqr_e;`
272	140	jguarin200	`sync_chain_proc:`
273	212	jguarin200	`process(clk,rst,sync_chain_1)`
274	140	jguarin200	`begin`
275			`if rst=rstMasterValue then`
276	228	jguarin200	`ssync_chain(ssync_chain_max downto ssync_chain_min) <= (others => '0');`
277	230	jguarin200
278	229	jguarin200	`elsif clk'event and clk='1' then`
279	228	jguarin200	`for i in ssync_chain_max downto ssync_chain_min+1 loop`
280	142	jguarin200	`ssync_chain(i) <= ssync_chain(i-1);`
281	140	jguarin200	`end loop;`
282	228	jguarin200	`ssync_chain(ssync_chain_min) <= sync_chain_1;`
283	140	jguarin200	`end if;`
284			`end process sync_chain_proc;`
285	144	jguarin200
286	163	jguarin200
287	158	jguarin200
288
289	124	jguarin200
290	140	jguarin200	`--! El siguiente código sirve para conectar arreglos a señales std_logic_1164, son abstracciones de código también, sin embargo se realizan a través de registros.`
291			`register_products_outputs:`
292			`process (clk)`
293			`begin`
294			`if clk'event and clk='1' then`
295	229	jguarin200	`sp0 <= sp0o;`
296			`sp1 <= sp1o;`
297			`sp2 <= sp2o;`
298			`sp3 <= sp3o;`
299			`sp4 <= sp4o;`
300			`sp5 <= sp5o;`
301			`sa0 <= sa0o;`
302			`sa1 <= sa1o;`
303			`sa2 <= sa2o;`
304			`sinv32 <= sinv32o;`
305			`ssq32 <= ssq32o;`
306	140	jguarin200	`end if;`
307			`end process;`
308	148	jguarin200
309	196	jguarin200	`--! Decodificación del Datapath.`
310	229	jguarin200	`datapathproc:process(dcs,ax,bx,ay,by,az,bz,sinv32,sp0,sp1,sp2,sp3,sp4,sp5,sa0,sa1,sa2,sq0_q,sqx_q,sqy_q,sqz_q,ssync_chain,ssq32,sq2_q)`
311	196	jguarin200	`begin`
312	229	jguarin200
313			`case dcs is`
314			`when "011" =>`
315
316			`sq2_w <= '0';`
317			`sq2_d <= ssq32;`
318
319			`sfactor0 <= ay;`
320			`sfactor1 <= bz;`
321			`sfactor2 <= az;`
322			`sfactor3 <= by;`
323			`sfactor4 <= az;`
324			`sfactor5 <= bx;`
325			`sfactor6 <= ax;`
326			`sfactor7 <= bz;`
327			`sfactor8 <= ax;`
328			`sfactor9 <= by;`
329			`sfactor10 <= ay;`
330			`sfactor11 <= bx;`
331
332			`ssumando0 <= sp0;`
333			`ssumando1 <= sp1;`
334			`ssumando2 <= sp2;`
335			`ssumando3 <= sp3;`
336			`ssumando4 <= sp4;`
337			`ssumando5 <= sp5;`
338
339			`sqr_dx <= sa0;`
340			`sqr_dy <= sa1;`
341			`sqr_dz <= sa2;`
342
343	230	jguarin200	`sqr_w <= ssync_chain(13+adder2_delay);`
344	229	jguarin200
345			`when"000"\|"001" =>`
346
347			`sq2_w <= '0';`
348			`sq2_d <= ssq32;`
349
350			`sfactor0 <= ay;`
351			`sfactor1 <= bz;`
352			`sfactor2 <= az;`
353			`sfactor3 <= by;`
354			`sfactor4 <= az;`
355			`sfactor5 <= bx;`
356			`sfactor6 <= ax;`
357			`sfactor7 <= bz;`
358			`sfactor8 <= ax;`
359			`sfactor9 <= by;`
360			`sfactor10 <= ay;`
361			`sfactor11 <= bx;`
362
363
364			`ssumando0 <= ax;`
365			`ssumando1 <= bx;`
366			`ssumando2 <= ay;`
367			`ssumando3 <= by;`
368			`ssumando4 <= az;`
369			`ssumando5 <= bz;`
370
371			`sqr_dx <= sa0;`
372			`sqr_dy <= sa1;`
373			`sqr_dz <= sa2;`
374
375	230	jguarin200	`sqr_w <= ssync_chain(9+adder2_delay);`
376	229	jguarin200
377			`when"110" \|"100" =>`
378
379
380
381			`sfactor0 <= ax;`
382			`sfactor1 <= bx;`
383			`sfactor2 <= ay;`
384			`sfactor3 <= by;`
385			`sfactor4 <= az;`
386			`sfactor5 <= bz;`
387
388			`sfactor6 <= sinv32;`
389			`sfactor7 <= sqx_q;`
390			`sfactor8 <= sinv32;`
391			`sfactor9 <= sqy_q;`
392			`sfactor10 <= sinv32;`
393			`sfactor11 <= sqz_q;`
394
395
396			`ssumando0 <= sp0;`
397			`ssumando1 <= sp1;`
398			`ssumando2 <= sa0;`
399			`ssumando3 <= sq0_q;`
400			`ssumando4 <= az;`
401			`ssumando5 <= bz;`
402
403			`if dcs(1)='1' then`
404			`sq2_d <= ssq32;`
405			`sq2_w <= ssync_chain(22);`
406			`else`
407			`sq2_d <= sa1;`
408			`sq2_w <= ssync_chain(21);`
409			`end if;`
410
411			`sqr_dx <= sp3;`
412			`sqr_dy <= sp4;`
413			`sqr_dz <= sp5;`
414
415			`sqr_w <= ssync_chain(27);`
416
417			`when others =>`
418
419			`sq2_w <= '0';`
420			`sq2_d <= ssq32;`
421
422			`sfactor0 <= ax;`
423			`sfactor1 <= bx;`
424			`sfactor2 <= ay;`
425			`sfactor3 <= by;`
426			`sfactor4 <= az;`
427			`sfactor5 <= bz;`
428
429			`sfactor6 <= ax;`
430			`sfactor7 <= bx;`
431			`sfactor8 <= ay;`
432			`sfactor9 <= by;`
433			`sfactor10 <= az;`
434			`sfactor11 <= bz;`
435
436			`ssumando0 <= sp0;`
437			`ssumando1 <= sp1;`
438			`ssumando2 <= sa0;`
439			`ssumando3 <= sq0_q;`
440			`ssumando4 <= az;`
441			`ssumando5 <= bz;`
442
443			`sqr_dx <= sp3;`
444			`sqr_dy <= sp4;`
445			`sqr_dz <= sp5;`
446
447			`sqr_w <= ssync_chain(5);`
448
449			`end case;`
450
451
452
453
454	123	jguarin200	`end process;`
455
456	204	jguarin200	`--! Colas internas de producto punto, ubicada en el pipe line aritméco. Paralelo a los sumadores a0 y a2.`
457			`q0 : scfifo --! Debe ir registrada la salida.`
458			`generic map (`
459	212	jguarin200	`allow_rwcycle_when_full => "ON",`
460	229	jguarin200	`lpm_widthu => 4,`
461			`lpm_numwords => 16,`
462	204	jguarin200	`lpm_showahead => "ON",`
463			`lpm_width => 32,`
464			`overflow_checking => "ON",`
465			`underflow_checking => "ON",`
466	228	jguarin200	`use_eab => "ON"`
467	204	jguarin200	`)`
468			`port map (`
469	212	jguarin200	`sclr => '0',`
470			`clock => clk,`
471	228	jguarin200	`rdreq => ssync_chain(13),`
472	235	jguarin200	`wrreq => ssync_chain(5+adder2_delay),`
473	229	jguarin200	`data => sp2,`
474			`q => sq0_q`
475	204	jguarin200	`);`
476	212	jguarin200	`--! Colas internas de producto punto, ubicada en el pipe line aritméco. Paralelo a los sumadores a0 y a2.`
477	228	jguarin200	`q2 : scfifo --! Debe ir registrada la salida.`
478	212	jguarin200	`generic map (`
479			`allow_rwcycle_when_full => "ON",`
480	229	jguarin200	`lpm_widthu => 4,`
481			`lpm_numwords => 16,`
482	212	jguarin200	`lpm_showahead => "ON",`
483			`lpm_type => "SCIFIFO",`
484			`lpm_width => 32,`
485			`overflow_checking => "ON",`
486			`underflow_checking => "ON",`
487	228	jguarin200	`use_eab => "ON"`
488	212	jguarin200	`)`
489			`port map (`
490	228	jguarin200	`rdreq => ssync_chain(27),`
491	212	jguarin200	`sclr => '0',`
492			`clock => clk,`
493	228	jguarin200	`empty => sq2_e,`
494	229	jguarin200	`q => sqr_dsc,`
495	228	jguarin200	`wrreq => sq2_w,`
496			`data => sq2_d`
497	212	jguarin200	`);`
498	123	jguarin200
499	204	jguarin200	`--! Cola interna de normalización de vectores, ubicada entre el pipeline aritmético`
500	229	jguarin200	`qx : scfifo`

Browse

Tools

Subversion Repositories raytrac

[/] [raytrac/] [branches/] [fp_sgdma/] [ap_n_dpc.vhd] - Blame information for rev 237