Clock wizard will need to be run to create the clock generator for the project.
4
The following clocks are needed:
5
120 MHZ, 80 MHz, 40 MHz, 20 MHz, and something close to 14.7MHz
6
7
The ILA wizard will also need to be run to setup the ILA as outlined in the source code. Alternately the ILA component may be commented out.
8
9
The uart6551_x12 core can be found under the communications tab (uart6551) at opencores.org.
10
11
The other cores needed for the project can be found somewhere in the rtl file folders.
12
13
It will probably be neccessary to edit the memory cores to set the file where the rom data is read from. I have left it setup as it is on my workstation, but you'll likely want to do it differently.
