URL https://opencores.org/ocsvn/risc5x/risc5x/trunk

Subversion Repositories risc5x

[/] [risc5x/] [trunk/] [jumptest.asm] - Blame information for rev 5

Go to most recent revision | Details | Compare with Previous | View Log


;
        LIST    p=16C58 ; PIC16C58 is the target processor
 
 
;
; Core Sanity Test
;
; JUMPTEST.ASM
;
; test some jumps
; NEW in rev 1.1, test indirect addressing
; test some inc & decs
; sit in loop multiplying port A with a constant
; output 16 bit result on ports C & B
;
 
CARRY   equ     H'00'   ; Carry bit in STATUS register
DC      equ     H'01'   ; DC    bit in STATUS register
ZERO    equ     H'02'   ; Zero  bit in STATUS register
W       equ     H'00'   ; W indicator for many instruction (not the address!)
 
INDF    equ     H'00'   ; Magic register that uses INDIRECT register
TIMER0  equ     H'01'   ; Timer register
PC      equ     H'02'   ; PC
STATUS  equ     H'03'   ; STATUS register F3
FSR     equ     H'04'   ; INDIRECT Pointer Register
porta   equ     H'05'   ; I/O register F5
portb   equ     H'06'   ; I/O register F6
portc   equ     H'07'   ; I/O register F7
x       equ     H'09'   ; scratch
y       equ     H'0A'   ; scratch
rh      equ     H'0B'   ; result h
rl      equ     H'0C'   ; result l
 
mult    MACRO   bit
        btfsc   y,bit
        addwf   rh,1
        rrf     rh,1
        rrf     rl,1
        ENDM
 
start:  movlw   H'ff'
        tris    porta   ; PORTA is Input
        clrw
        tris    portb   ; PORTB is Output
        tris    portc   ; PORTC is Output
        movwf   portb   ; PORTB <= 00
 
        movlw   h'0B'
        movwf   PC      ; move to pc (jump1)
 
        movlw   h'F0'   ; fail 0
        movwf   portb
        goto fail
 
jump1:  movlw   h'05'
        addwf   PC,f   ; jump forward to jump2
        movlw   h'F1'   ; fail 1
        movwf   portb
        goto fail
 
jump3:  goto    jump4   ; continue
        nop
 
jump2:  movlw   h'04'
        subwf   PC, f   ; jump back to jump 3
 
        movlw   h'F2'   ; fail 2
        movwf   portb
        goto fail
 
jump4:
        movlw   h'10'   ; set locations 10-1F to xFF
        movwf   FSR
        movlw   h'ff'
clrlp:  movwf   INDF
        incf    FSR,F
        btfsc   FSR,4
        goto clrlp
 
        movlw   h'10'
        movwf   x
        movlw   h'20'
        movwf   y
 
        movlw   x
        movwf   FSR     ; point FSR at x
 
        movf    FSR,w
        xorlw   h'89'   ; check its x (note bit 7 set always)
        btfss   STATUS,ZERO
        goto    fail
        movf    INDF,w
        xorlw   h'10'   ; check its 10
        btfss   STATUS,ZERO
        goto    fail
 
        movlw   h'15'   ; write 15 to x using INDF
        movwf   INDF
        movf    x,w     ; read x
        xorlw   h'15'   ; check its 15
        btfss   STATUS,ZERO
        goto    fail
 
        incf    FSR,F
        movf    INDF,w
        xorlw   h'20'   ; check its 20
        btfss   STATUS,ZERO
        goto    fail
 
        movlw   h'00'
        movwf   FSR
        movlw   h'A5'   ; paranoid !
        movf    INDF,w  ; reading INDR itself should = 0
        xorlw   h'00'   ; check
        btfss   STATUS,ZERO
        goto    fail
 
        ; check banking
        ; locations 20-2F, 40-4F, 60-6F all map to 0-0F
        ; locations 10-1F, 30-3F, 50-5F, 70-7F are real
 
 
        movlw   h'00'
        movwf   FSR     ; set bank 0
        movlw   h'1F'
        movwf   h'1F'
 
        movlw   h'20'
        movwf   FSR     ; set bank 1
        movlw   h'3F'
        movwf   h'1F'
 
        movlw   h'40'
        movwf   FSR     ; set bank 2
        movlw   h'5F'
        movwf   h'1F'
 
        movlw   h'60'
        movwf   FSR     ; set bank 3
        movlw   h'7F'
        movwf   h'1F'
        ; check
 
        movlw   h'00'
        movwf   FSR     ; set bank 0
        movf    h'1F',w
        xorlw   h'1F'
        btfss   STATUS,ZERO
        goto    fail
 
        movlw   h'20'
        movwf   FSR     ; set bank 1
        movf    h'1F',w
        xorlw   h'3F'
        btfss   STATUS,ZERO
        goto    fail
 
        movlw   h'40'
        movwf   FSR     ; set bank 2
        movf    h'1F',w
        xorlw   h'5F'
        btfss   STATUS,ZERO
        goto    fail
 
        movlw   h'60'
        movwf   FSR     ; set bank 3
        movf    h'1F',w
        xorlw   h'7F'
        btfss   STATUS,ZERO
        goto    fail
 
        movlw   h'00'
        movwf   FSR     ; set bank 0
 
        movlw   h'45'
        movwf   h'0F'
 
        movlw   h'60'
        movwf   FSR     ; set bank 3
        movlw   h'54'
        movwf   h'0F'
 
        movlw   h'40'
        movwf   FSR     ; set bank 2
        movf    h'0f',w ; w should contain 54
 
        xorlw   h'54'
        btfsc   STATUS,ZERO
        goto test1
 
        movlw   h'F3'   ; fail 3
        movwf   portb
 
        goto fail
 
test1:  movlw   h'00'
        movwf   FSR     ; set bank 0
        movlw   h'04'   ; w <= 04
        movwf   x
        decf    x,f     ; x <= 03
        decf    x,f     ; x <= 02
        decf    x,f     ; x <= 01
        decf    x,f     ; x <= 00
        decf    x,f     ; x <= FF
        movf    x,w
        xorlw   h'FF'   ; does w = ff ?
        btfss   STATUS,ZERO ; skip if clear
        goto    fail
        incf    x,f     ; x <= 00
        incf    x,f     ; x <= 01
        movf    x,w
        xorlw   h'01'   ; does w = 01
        btfss   STATUS,ZERO
        goto    fail
 
        ; test logic
 
        clrf    x       ; x <= 00
        movlw   h'a5'
        iorwf   x,f     ; x <= a5
        swapf   x,f     ; x <= 5a
        movlw   h'f0'
        andwf   x,f     ; x <= 50
        comf    x,f     ; x <= af
        movlw   h'5a'
        xorwf   x,f     ; x <= f5
 
        ;check
        movfw   x
        xorlw   h'f5'
        btfsc   STATUS,ZERO
        goto test2
        movlw   h'F4'   ; fail 4
        movwf   portb
        goto fail
 
test2:  movlw   h'23'
        movwf   x       ; x <= 23
        movlw   h'e1'   ; w <= e1
        addwf   x,f     ; x <= 04
        btfss   STATUS,CARRY
        goto    fail    ; carry should be set
        movlw   h'02'   ; w <= 02
        subwf   x,f     ; x <= 02
        btfss   STATUS,CARRY
        goto    fail    ; borrow should be clear
 
        movlw   h'34'   ; w <= 34
        subwf   x,f     ; x <= ce
        btfsc   STATUS,CARRY
        goto    fail    ; borrow should be set
 
        movf    x,w
        xorlw   h'CE'
        btfss   STATUS,ZERO
        goto    fail    ; x /= ce
 
test3:  movlw   h'34'   ; test dc flag
        movwf   x
        movlw   h'0F'
        addwf   x,f     ; x <= 43
        btfsc   STATUS,CARRY
        goto    fail    ; carry should be clear
        btfss   STATUS,DC
        goto    fail    ; dc should be set
        movlw   h'01'
        subwf   x,f     ; x <= 42
        btfss   STATUS,CARRY
        goto    fail    ; borrow should be clear
        btfss   STATUS,DC
        goto    fail    ; dc borrow should be clear
        movlw   h'FF'
        subwf   x,f
        btfsc   STATUS,CARRY
        goto    fail    ; borrow should be set
        btfsc  STATUS,DC
        goto    fail    ; dc borrow should be set
 
        movf    x,w
        xorlw   h'43'   ; final check
        btfss   STATUS,ZERO
        goto    fail    ; x /= 43
        movlw   h'E0'   ; ok
        movwf   portb
 
loop1:                  ; mult x by y
        movf    porta,W
        movwf   x
        movlw   h'23'
        movwf   y
 
        clrf    rh
        clrf    rl
        movf    x,w
        bcf     STATUS,CARRY
        mult    0
        mult    1
        mult    2
        mult    3
        mult    4
        mult    5
        mult    6
        mult    7
 
        movf    rl,w
        movwf   portb   ; on port b low result
        movf    rh,w
        movwf   portc   ; on port c high result
        goto    loop1
 
fail:   goto    fail
        end

Browse

Tools

Subversion Repositories risc5x

[/] [risc5x/] [trunk/] [jumptest.asm] - Blame information for rev 5

Line No.	Rev	Author	Line
1	2	mikej	`;`
2			`LIST p=16C58 ; PIC16C58 is the target processor`
3
4
5			`;`
6			`; Core Sanity Test`
7			`;`
8			`; JUMPTEST.ASM`
9			`;`
10			`; test some jumps`
11			`; NEW in rev 1.1, test indirect addressing`
12			`; test some inc & decs`
13			`; sit in loop multiplying port A with a constant`
14			`; output 16 bit result on ports C & B`
15			`;`
16
17			`CARRY equ H'00' ; Carry bit in STATUS register`
18			`DC equ H'01' ; DC bit in STATUS register`
19			`ZERO equ H'02' ; Zero bit in STATUS register`
20			`W equ H'00' ; W indicator for many instruction (not the address!)`
21
22			`INDF equ H'00' ; Magic register that uses INDIRECT register`
23			`TIMER0 equ H'01' ; Timer register`
24			`PC equ H'02' ; PC`
25			`STATUS equ H'03' ; STATUS register F3`
26			`FSR equ H'04' ; INDIRECT Pointer Register`
27			`porta equ H'05' ; I/O register F5`
28			`portb equ H'06' ; I/O register F6`
29			`portc equ H'07' ; I/O register F7`
30			`x equ H'09' ; scratch`
31			`y equ H'0A' ; scratch`
32			`rh equ H'0B' ; result h`
33			`rl equ H'0C' ; result l`
34
35			`mult MACRO bit`
36			`btfsc y,bit`
37			`addwf rh,1`
38			`rrf rh,1`
39			`rrf rl,1`
40			`ENDM`
41
42			`start: movlw H'ff'`
43			`tris porta ; PORTA is Input`
44			`clrw`
45			`tris portb ; PORTB is Output`
46			`tris portc ; PORTC is Output`
47			`movwf portb ; PORTB <= 00`
48
49			`movlw h'0B'`
50			`movwf PC ; move to pc (jump1)`
51
52			`movlw h'F0' ; fail 0`
53			`movwf portb`
54			`goto fail`
55
56			`jump1: movlw h'05'`
57			`addwf PC,f ; jump forward to jump2`
58			`movlw h'F1' ; fail 1`
59			`movwf portb`
60			`goto fail`
61
62			`jump3: goto jump4 ; continue`
63			`nop`
64
65			`jump2: movlw h'04'`
66			`subwf PC, f ; jump back to jump 3`
67
68			`movlw h'F2' ; fail 2`
69			`movwf portb`
70			`goto fail`
71
72			`jump4:`
73			`movlw h'10' ; set locations 10-1F to xFF`
74			`movwf FSR`
75			`movlw h'ff'`
76			`clrlp: movwf INDF`
77			`incf FSR,F`
78			`btfsc FSR,4`
79			`goto clrlp`
80
81			`movlw h'10'`
82			`movwf x`
83			`movlw h'20'`
84			`movwf y`
85
86			`movlw x`
87			`movwf FSR ; point FSR at x`
88
89			`movf FSR,w`
90			`xorlw h'89' ; check its x (note bit 7 set always)`
91			`btfss STATUS,ZERO`
92			`goto fail`
93			`movf INDF,w`
94			`xorlw h'10' ; check its 10`
95			`btfss STATUS,ZERO`
96			`goto fail`
97
98			`movlw h'15' ; write 15 to x using INDF`
99			`movwf INDF`
100			`movf x,w ; read x`
101			`xorlw h'15' ; check its 15`
102			`btfss STATUS,ZERO`
103			`goto fail`
104
105			`incf FSR,F`
106			`movf INDF,w`
107			`xorlw h'20' ; check its 20`
108			`btfss STATUS,ZERO`
109			`goto fail`
110
111			`movlw h'00'`
112			`movwf FSR`
113			`movlw h'A5' ; paranoid !`
114			`movf INDF,w ; reading INDR itself should = 0`
115			`xorlw h'00' ; check`
116			`btfss STATUS,ZERO`
117			`goto fail`
118
119			`; check banking`
120			`; locations 20-2F, 40-4F, 60-6F all map to 0-0F`
121			`; locations 10-1F, 30-3F, 50-5F, 70-7F are real`
122
123
124			`movlw h'00'`
125			`movwf FSR ; set bank 0`
126			`movlw h'1F'`
127			`movwf h'1F'`
128
129			`movlw h'20'`
130			`movwf FSR ; set bank 1`
131			`movlw h'3F'`
132			`movwf h'1F'`
133
134			`movlw h'40'`
135			`movwf FSR ; set bank 2`
136			`movlw h'5F'`
137			`movwf h'1F'`
138
139			`movlw h'60'`
140			`movwf FSR ; set bank 3`
141			`movlw h'7F'`
142			`movwf h'1F'`
143			`; check`
144
145			`movlw h'00'`
146			`movwf FSR ; set bank 0`
147			`movf h'1F',w`
148			`xorlw h'1F'`
149			`btfss STATUS,ZERO`
150			`goto fail`
151
152			`movlw h'20'`
153			`movwf FSR ; set bank 1`
154			`movf h'1F',w`
155			`xorlw h'3F'`
156			`btfss STATUS,ZERO`
157			`goto fail`
158
159			`movlw h'40'`
160			`movwf FSR ; set bank 2`
161			`movf h'1F',w`
162			`xorlw h'5F'`
163			`btfss STATUS,ZERO`
164			`goto fail`
165
166			`movlw h'60'`
167			`movwf FSR ; set bank 3`
168			`movf h'1F',w`
169			`xorlw h'7F'`
170			`btfss STATUS,ZERO`
171			`goto fail`
172
173			`movlw h'00'`
174			`movwf FSR ; set bank 0`
175
176			`movlw h'45'`
177			`movwf h'0F'`
178
179			`movlw h'60'`
180			`movwf FSR ; set bank 3`
181			`movlw h'54'`
182			`movwf h'0F'`
183
184			`movlw h'40'`
185			`movwf FSR ; set bank 2`
186			`movf h'0f',w ; w should contain 54`
187
188			`xorlw h'54'`
189			`btfsc STATUS,ZERO`
190			`goto test1`
191
192			`movlw h'F3' ; fail 3`
193			`movwf portb`
194
195			`goto fail`
196
197			`test1: movlw h'00'`
198			`movwf FSR ; set bank 0`
199			`movlw h'04' ; w <= 04`
200			`movwf x`
201			`decf x,f ; x <= 03`
202			`decf x,f ; x <= 02`
203			`decf x,f ; x <= 01`
204			`decf x,f ; x <= 00`
205			`decf x,f ; x <= FF`
206			`movf x,w`
207			`xorlw h'FF' ; does w = ff ?`
208			`btfss STATUS,ZERO ; skip if clear`
209			`goto fail`
210			`incf x,f ; x <= 00`
211			`incf x,f ; x <= 01`
212			`movf x,w`
213			`xorlw h'01' ; does w = 01`
214			`btfss STATUS,ZERO`
215			`goto fail`
216
217			`; test logic`
218
219			`clrf x ; x <= 00`
220			`movlw h'a5'`
221			`iorwf x,f ; x <= a5`
222			`swapf x,f ; x <= 5a`
223			`movlw h'f0'`
224			`andwf x,f ; x <= 50`
225			`comf x,f ; x <= af`
226			`movlw h'5a'`
227			`xorwf x,f ; x <= f5`
228
229			`;check`
230			`movfw x`
231			`xorlw h'f5'`
232			`btfsc STATUS,ZERO`
233			`goto test2`
234			`movlw h'F4' ; fail 4`
235			`movwf portb`
236			`goto fail`
237
238			`test2: movlw h'23'`
239			`movwf x ; x <= 23`
240			`movlw h'e1' ; w <= e1`
241			`addwf x,f ; x <= 04`
242			`btfss STATUS,CARRY`
243			`goto fail ; carry should be set`
244			`movlw h'02' ; w <= 02`
245			`subwf x,f ; x <= 02`
246			`btfss STATUS,CARRY`
247			`goto fail ; borrow should be clear`
248
249			`movlw h'34' ; w <= 34`
250			`subwf x,f ; x <= ce`
251			`btfsc STATUS,CARRY`
252			`goto fail ; borrow should be set`
253
254			`movf x,w`
255			`xorlw h'CE'`
256			`btfss STATUS,ZERO`
257			`goto fail ; x /= ce`
258
259			`test3: movlw h'34' ; test dc flag`
260			`movwf x`
261			`movlw h'0F'`
262			`addwf x,f ; x <= 43`
263			`btfsc STATUS,CARRY`
264			`goto fail ; carry should be clear`
265			`btfss STATUS,DC`
266			`goto fail ; dc should be set`
267			`movlw h'01'`
268			`subwf x,f ; x <= 42`
269			`btfss STATUS,CARRY`
270			`goto fail ; borrow should be clear`
271			`btfss STATUS,DC`
272			`goto fail ; dc borrow should be clear`
273			`movlw h'FF'`
274			`subwf x,f`
275			`btfsc STATUS,CARRY`
276			`goto fail ; borrow should be set`
277			`btfsc STATUS,DC`
278			`goto fail ; dc borrow should be set`
279
280			`movf x,w`
281			`xorlw h'43' ; final check`
282			`btfss STATUS,ZERO`
283			`goto fail ; x /= 43`
284			`movlw h'E0' ; ok`
285			`movwf portb`
286
287			`loop1: ; mult x by y`
288			`movf porta,W`
289			`movwf x`
290			`movlw h'23'`
291			`movwf y`
292
293			`clrf rh`
294			`clrf rl`
295			`movf x,w`
296			`bcf STATUS,CARRY`
297			`mult 0`
298			`mult 1`
299			`mult 2`
300			`mult 3`
301			`mult 4`
302			`mult 5`
303			`mult 6`
304			`mult 7`
305
306			`movf rl,w`
307			`movwf portb ; on port b low result`
308			`movf rh,w`
309			`movwf portc ; on port c high result`
310			`goto loop1`
311
312			`fail: goto fail`
313			`end`