Subversion Repositories rtf_sprite_controller

// ============================================================================

// (C) 2007 Robert Finch

// All Rights Reserved.

//

//      edge_det.v

//

//

// This source file is free software: you can redistribute it and/or modify 

// it under the terms of the GNU Lesser General Public License as published 

// by the Free Software Foundation, either version 3 of the License, or     

// (at your option) any later version.                                      

//                                                                          

// This source file is distributed in the hope that it will be useful,      

// but WITHOUT ANY WARRANTY; without even the implied warranty of           

// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the            

// GNU General Public License for more details.                             

//                                                                          

// You should have received a copy of the GNU General Public License        

// along with this program.  If not, see <http://www.gnu.org/licenses/>.    

//                                                                          

//    Notes:

//

//      Edge detector

//      This little core detects an edge (positive, negative, and

//      either) in the input signal.

//

// ============================================================================

//

module edge_det(rst, clk, ce, i, pe, ne, ee);

input rst;              // reset

input clk;              // clock

input ce;               // clock enable

input i;                // input signal

output pe;              // positive transition detected

output ne;              // negative transition detected

output ee;              // either edge (positive or negative) transition detected

reg ed;

always @(posedge clk)

        if (rst)

                ed <= 1'b0;

        else if (ce)

                ed <= i;

assign pe = ~ed & i;    // positive: was low and is now high

assign ne = ed & ~i;    // negative: was high and is now low

assign ee = ed ^ i;             // either: signal is now opposite to what it was

endmodule