Subversion Repositories s1_core

#!/bin/bash

# Check command line parameter

if ( (test $# != 1) || ((test $1 != "-me") && (test $1 != "-se") && (test $1 != "-ee")) ) then

  echo "update_sparccore - Script to update SPARC Core sources from a fresh OpenSPARC installation";

  echo "Usage:";

  echo "      update_sparccore {-me|-se|-ee}";

  echo "where parameter refers to the S1 Core version you want to obtain in your environment:";

  echo "      -me : S1 Core Memory-less Edition (single-thread, no L1 caches)";

  echo "      -se : S1 Core Single-thread Edition (single-thread, normal 16K+8K caches)";

  echo "      -ee : S1 Core Elite Edition (four threads support, normal 16K+8K caches)";

  echo "NOTE: To run this script you MUST have the OpenSPARC T1 environment unpacked";

  echo "      and the T1_ROOT variable properly set in your S1_ROOT/sourceme file.";

  exit 1;

fi

# Set source and destination directories

test_var S1_ROOT

test_var T1_ROOT

SRC_DIR=$T1_ROOT/design/sys/iop

DST_DIR=$S1_ROOT/hdl/rtl/sparc_core

# Clean destination directory

rm -f $DST_DIR/*.*

rm -f $DST_DIR/include/*.*

# Copy all the Verilog files of the SPARC Core into destination directory

cp $SRC_DIR/include/*.h $DST_DIR/include

cp $SRC_DIR/srams/rtl/*.v $DST_DIR

cp $SRC_DIR/analog/bw_clk/rtl/*.v $DST_DIR

cp $SRC_DIR/analog/bw_rng/rtl/*.v $DST_DIR

find $SRC_DIR/common -name "*.v" -exec cp {} $DST_DIR \;

find $SRC_DIR/pr_macro -name "*.v" -exec cp {} $DST_DIR \;

find $SRC_DIR/sparc -name "*.v" -exec cp {} $DST_DIR \;

# Remove synthetized files -- if any

find $DST_DIR -name "*_flat.v" -exec rm -f {} \;

find $DST_DIR -name "*_flat_nc.v" -exec rm -f {} \;

find $DST_DIR -name "*_hier.v" -exec rm -f {} \;

# Also remove SPU files

rm -f $DST_DIR/*spu*.v

# Remove other unused files (according to liuyadong)

cd $DST_DIR

rm bw_r_l2t.v bw_r_cm16x40.v bw_r_cm16x40b.v bw_r_dcm.v bw_r_efa.v bw_r_l2d.v bw_r_l2d_32k.v \

    bw_r_l2d_rep_bot.v bw_r_l2d_rep_top.v bw_r_rf16x128d.v bw_r_rf32x108.v bw_rf_16x65.v bw_rf_16x81.v \

    bw_clk_cclk_hdr_48x.v bw_clk_cclk_hdr_64x.v bw_clk_cclk_inv_128x.v bw_clk_cclk_inv_48x.v \

    bw_clk_cclk_inv_64x.v bw_clk_cclk_inv_96x.v bw_clk_cclk_scanlasr_2x.v bw_clk_cclk_sync.v \

    bw_clk_gclk_center_3inv.v bw_clk_gclk_inv_192x.v bw_clk_gclk_inv_224x.v bw_clk_gclk_inv_288x.v \

    bw_clk_gclk_inv_r90_192x.v bw_clk_gclk_inv_r90_224x.v bw_clk_gclk_inv_r90_256x.v bw_clk_gclk_sctag_3inv.v \

    bw_clk_gl.v bw_clk_gl_fdbk.v bw_clk_gl_hz.v bw_clk_gl_rstce_rtl.v bw_clk_gl_vrt_all.v flop_rptrs_xa0.v \

    flop_rptrs_xa1.v flop_rptrs_xb0.v flop_rptrs_xb1.v flop_rptrs_xb2.v flop_rptrs_xb3.v flop_rptrs_xc0.v \

    flop_rptrs_xc1.v flop_rptrs_xc2.v flop_rptrs_xc3.v flop_rptrs_xc4.v flop_rptrs_xc5.v flop_rptrs_xc6.v \

    flop_rptrs_xc7.v bw_rng.v cluster_header_ctu.v cluster_header_dup.v cluster_header_sync.v dbl_buf.v \

    sync_pulse_synchronizer.v synchronizer_asr_dup.v ucb_bus_in.v ucb_bus_out.v ucb_flow_2buf.v \

    ucb_flow_jbi.v ucb_flow_spi.v ucb_noflow.v spc_pcx_buf.v

## Clean the files by substituting the $error System Task and applying defines with Icarus preprocessor

#for file in $DST_DIR/*.v ; do

#  sed -e 's/\$error/\$display/g' $file | sed -e 's/negedge rclk or rst_l/negedge rclk/g' > $DST_DIR/temp.v

#  if(test $1 == "-me" || test $1 == "-se") then

#    iverilog -E -D CMP_CLK_PERIOD=1 -D FPGA_SYN -D FPGA_SYN_1THREAD -D FPGA_SYN_NO_SPU -I $DST_DIR/include -o$file $DST_DIR/temp.v

#  else

#    iverilog -E -D CMP_CLK_PERIOD=1 -D FPGA_SYN -D FPGA_SYN_NO_SPU -I $DST_DIR/include -o$file $DST_DIR/temp.v

#  fi

#  # These steps are required because Icarus does not allow this kind of comments

#  sed -e 's/\* ========== Copyright Header Begin/\/\* ========== Copyright Header Begin/g' $file > $DST_DIR/temp.v

#  mv -f $DST_DIR/temp.v $file

#done

## Correct some strange strings

#sed -e 's/sparc_exu_alulogic logic/sparc_exu_alulogic logic_MAYBEARESERVEDWORD/g' $DST_DIR/sparc_exu_alu.v > $DST_DIR/temp.v

#mv $DST_DIR/temp.v $DST_DIR/sparc_exu_alu.v

#sed -e 's/logic/logic_MAYBEARESERVEDWORD/g' $DST_DIR/sparc_ffu_ctl_visctl.v > $DST_DIR/temp.v

#mv $DST_DIR/temp.v $DST_DIR/sparc_ffu_ctl_visctl.v

#sed -e 's/$display(\"ILLEGAL_THR_STATE\"/\/\/$display(\"ILLEGAL_THR_STATE\"/g' sparc_ifu_thrfsm.v > $DST_DIR/temp.v

#mv $DST_DIR/temp.v $DST_DIR/sparc_ifu_thrfsm.v

#sed -e 's/(\* keep = "yes" \*)//g' $DST_DIR/bw_r_frf.v > $DST_DIR/temp.v

#mv $DST_DIR/temp.v $DST_DIR/bw_r_frf.v

#sed -e 's/synthesis translate_/synopsys translate_/g' $DST_DIR/bw_r_irf.v > $DST_DIR/temp.v

#mv $DST_DIR/temp.v $DST_DIR/bw_r_irf.v

#sed -e 's/initial onereg/\/\/initial onereg/g' $DST_DIR/bw_r_irf_register.v > $DST_DIR/temp.v

#mv $DST_DIR/temp.v $DST_DIR/bw_r_irf_register.v

## After preprocessing we can safely delete the include directory

#rm -f $DST_DIR/include/*.*

## Disable L1 Instruction and Data Caches if required

#if(test $1 == "-me") then

#  cp -f $S1_ROOT/tools/src/bw_r_dcd.v $DST_DIR

#  cp -f $S1_ROOT/tools/src/bw_r_icd.v $DST_DIR

#  cp -f $S1_ROOT/tools/src/bw_r_idct.v $DST_DIR

#fi

## Hack the SPARC Core to add the external stall input from the bridge

## Cookbook from book "OpenSPARC Internals", paragraph 6.8

## Top-level of SPARC Core (s1_top.sparc)

#sed -e 's/pcx_spc_grant_px,/pcx_spc_grant_px,wbm_spc_stall,wbm_spc_resume,/g' $DST_DIR/sparc.v |

#  sed -e 's/pcx_spc_grant_px;/pcx_spc_grant_px;input wbm_spc_stall;input wbm_spc_resume;/g' |

#  sed -e 's/sparc_ifu ifu(/sparc_ifu ifu(.wbm_spc_stall(wbm_spc_stall),.wbm_spc_resume(wbm_spc_resume),/g' > $DST_DIR/sparc_TMP.v

#mv -f $DST_DIR/sparc_TMP.v $DST_DIR/sparc.v

## Fetch unit (s1_top.sparc.ifu)

#sed -e 's/ffu_ifu_stallreq,/ffu_ifu_stallreq,wbm_spc_stall,wbm_spc_resume,/g' $DST_DIR/sparc_ifu.v |

#  sed -e 's/ffu_ifu_stallreq;/ffu_ifu_stallreq;input wbm_spc_stall;input wbm_spc_resume;/g' |

#  sed -e 's/sparc_ifu_swl swl(/sparc_ifu_swl swl(.wbm_spc_stall(wbm_spc_stall),.wbm_spc_resume(wbm_spc_resume),/g' > $DST_DIR/sparc_ifu_TMP.v

#mv -f $DST_DIR/sparc_ifu_TMP.v $DST_DIR/sparc_ifu.v

## Switch logic unit (s1_top.sparc.ifu.swl)

#sed -e 's/thr_config_in_m,/thr_config_in_m,wbm_spc_stall,wbm_spc_resume,/g' $DST_DIR/sparc_ifu_swl.v |

#  sed -e 's/thr_config_in_m;/thr_config_in_m;input wbm_spc_stall;input wbm_spc_resume;wire wait_state;/g' |

#  sed -e 's/sparc_ifu_thrcmpl compl(/sparc_ifu_thrcmpl compl(.wbm_spc_stall(wbm_spc_stall),.wbm_spc_resume(wbm_spc_resume),.wait_state(wait_state),/g' |

#  sed -e 's/(~wm_stbwait | stb_retry);/(~wm_stbwait|stb_retry)\&(~wait_state|wbm_spc_resume);/g' |

#  sed -e 's/wm_stbwait & ~stb_retry);/wm_stbwait \& ~stb_retry|wait_state \& ~wbm_spc_resume);/g' > $DST_DIR/sparc_ifu_swl_TMP.v

#mv -f $DST_DIR/sparc_ifu_swl_TMP.v $DST_DIR/sparc_ifu_swl.v

## Stall completion logic (s1_top.sparc.ifu.swl.compl)

#sed -e 's/clear_wmo_e,/clear_wmo_e,wbm_spc_stall,wbm_spc_resume,wait_state,/g' $DST_DIR/sparc_ifu_thrcmpl.v |

#  sed -e 's/clear_wmo_e;/clear_wmo_e;input wbm_spc_stall;input wbm_spc_resume;output wait_state;wire wait_next;/g' |

#  sed -e 's/endmodule/assign wait_next=wbm_spc_stall|(wait_state \& ~wbm_spc_resume);\nendmodule/g' |

#  sed -e 's/endmodule/dffr wait_ff(.din(wait_next),.q(wait_state),.clk(clk),.rst(reset),.se(se),.si(),.so());\nendmodule/g' |

#  sed -e 's/assign completion/assign completion[0]/g' |

#  sed -e 's/endmodule/assign completion[1]=completion[0];\nendmodule/g' |

#  sed -e 's/endmodule/assign completion[2]=completion[0];\nendmodule/g' |

#  sed -e 's/endmodule/assign completion[3]=completion[0];\nendmodule/g' |

#  sed -e 's/wm_stbwait));/wm_stbwait|wait_state));/g' > $DST_DIR/sparc_ifu_thrcmpl_TMP.v

#mv -f $DST_DIR/sparc_ifu_thrcmpl_TMP.v $DST_DIR/sparc_ifu_thrcmpl.v

## This is a temporary hack to take a top-level SPARC Core with the SPU instance removed by-hand (ifdef is wrong)

#cp -f $S1_ROOT/tools/src/sparc.v $DST_DIR

# Copy also behavioral libraries used for RTL simulations

DST_DIR=$S1_ROOT/hdl/behav/sparc_libs

rm -f $DST_DIR/*.*

cp $SRC_DIR/../../../lib/m1/m1.behV $DST_DIR/m1_lib.v

cp $SRC_DIR/../../../lib/u1/u1.behV $DST_DIR/u1_lib.v