Subversion Repositories s6soc

////////////////////////////////////////////////////////////////////////////////

//

// Filename:    doorbell.c

//

// Project:     CMod S6 System on a Chip, ZipCPU demonstration project

//

// Purpose:     This is the user program, or perhaps more appropriately

//              user program(s), associated with running the ZipOS on the

//      CMod-S6.  To run within the ZipOS, a user program must implement

//      two functions: kntasks() and kinit(TASKP *).  The first one is simple.

//      it simply returns the number of tasks the kernel needs to allocate 

//      space for.  The second routine needs to allocate space for each task,

//      set up any file descriptors associated with (each) task, and identify

//      the entry point of each task.  These are the only two routines

//      associated with user tasks called from kernel space.  Examples of each

//      are found within here.

//

// Creator:     Dan Gisselquist, Ph.D.

//              Gisselquist Technology, LLC

//

////////////////////////////////////////////////////////////////////////////////

//

// Copyright (C) 2015-2016, Gisselquist Technology, LLC

//

// This program is free software (firmware): you can redistribute it and/or

// modify it under the terms of  the GNU General Public License as published

// by the Free Software Foundation, either version 3 of the License, or (at

// your option) any later version.

//

// This program is distributed in the hope that it will be useful, but WITHOUT

// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with this program.  (It's in the $(ROOT)/doc directory, run make with no

// target there if the PDF file isn't present.)  If not, see

// <http://www.gnu.org/licenses/> for a copy.

//

// License:     GPL, v3, as defined and found on www.gnu.org,

//              http://www.gnu.org/licenses/gpl.html

//

//

////////////////////////////////////////////////////////////////////////////////

//

//

#include "zipsys.h"

#include "board.h"

#include "ksched.h"

#include "kfildes.h"

#include "taskp.h"

#include "syspipe.h"

#include "ktraps.h"

#include "errno.h"

#include "swint.h"

#include "../dev/display.h"

#include "../dev/rtcsim.h"

#include "../dev/keypad.h"

/* Our system will need some pipes to handle ... life.  How about these:

 *

 *      rxpipe  - read()s from this pipe read from the UART

 *                      Interrupt fed

 *      txpipe  - write()s to this pipe write to the UART

 *                      Interrupt consumed

 *      keypipe - read()s from this pipe return values read by the keypad

 *      lcdpipe - write()s to this pipe write to the LCD display SPI port

 *      pwmpipe - write()s to this pipe will send values to the audio port

 *                      Interrupt consumed

 *

 * These pipes are allocated within the kernel setup function, ksetup().

 */

/* We'll need some tasks as well:

 *      User command task

 *              Handles user interaction

 *                      Reads from pipe--either the keypad or the UARTRX pipe

 *                      (Might be two such tasks in the system, one for each.)

 *              Sets clock upon request

 *              Reads from a pipe (rxpipe or keypipe), Writes to the txpipe pipe

 *      Doorbell task

 *              Maintains system time on the clock      : TIME: HH:MM:SS

 *              Maintains system status on display      : Light is (dis/en)abled

 *              Transitions when the doorbell is rung to: (fixed time line)

 *                                                      : DOORBELL!!

 *              When the doorbell is clear, returns to the original task.

 *              ---

 *              Waits on events, writes to the lcdpipe and pwmpipe.

 *              Reads from a command pipe, so that it can handle any user menu's

 *                      Command pipe.  This, though, is tricky.  It requires

 *                      a task that can be interrupted by either an event or a

 *                      pipe.  Blocking is going to be more tricky ...

 *      Keypad task

 *              Normally, you might think this should be an interrupt task.

 *              But, it needs state in order to have timeouts and to debounce

 *              the input pin.  So ... let's leave this as a task.

 *              ---

 *              Waits on events(keypad/timer), writes to the keypipe

 *      Display task

 *              The display does *not* need to be written to at an interrupt

 *              level.  It really needs to be written to at a task level, so

 *              let's make a display task.

 *              ---

 *              Reads from the lcdpipe

 *      Real-time Clock Task

 *              Gets called once per second to update the real-time clock

 *              and to post those updates as an event to other tasks that might

 *              be interested in it.

 *              ---

 *              Waits on system tasks, uses two semaphores

 */

/*

 * Read the keypad, write the results to an output pipe

 */

// #define      KEYPAD_TASK     keypad_task_id

/*

 * Read from the keypad, and set up a series of menu screens on the Display,

 * so that we can:

 *

 *      1. Set time

 *      2. Set dawn

 *      3. Set dusk

 */

#define MENU_TASK       menu_task_id

/*

 * Maintain a realtime clock

 */

#define RTCCLOCK_TASK   rtccclock_task_id

/*

 * Read from an incoming pipe, write results to the SPI port controlling the

 * display.

 */

#define DISPLAY_TASK    display_task_id

/*

 * Wait for a button press, and then based upon the clock set a light

 */

#define DOORBELL_TASK   doorbell_task_id

#define LAST_TASK       last_task_id

typedef enum    {

#ifdef  RTCCLOCK_TASK

        RTCCLOCK_TASK,

#endif

#ifdef  DOORBELL_TASK

#ifdef  DISPLAY_TASK

        DOORBELL_TASK, DISPLAY_TASK,

#endif

#endif

//#ifdef        KEYPAD_TASK

        //KEYPAD_TASK,

//#endif

#ifdef  MENU_TASK

        MENU_TASK,

#endif

#ifdef  COMMAND_TASK

        COMMAND_TASK,

#endif

        LAST_TASK

} TASKNAME;

void    rtctask(void),

        doorbell_task(void),

        display_task(void),

        keypad_task(void),

        menu_task(void);

        // idle_task ... is accomplished within the kernel

extern  void    restore_context(int *), save_context(int *);

extern  SYSPIPE *rxpipe, *txpipe, *pwmpipe, *lcdpipe;

SYSPIPE *midpipe;

extern  KDEVICE *pipedev;

int     kntasks(void) {

        return LAST_TASK;

} void  kinit(TASKP *tasklist) {

#ifdef  RTCCLOCK_TASK

        //

        tasklist[RTCCLOCK_TASK]    = new_task(16, rtctask);

#endif

#ifdef  DOORBELL_TASK

#ifdef  DISPLAY_TASK

        // 13 + 10 +9(uwrite)+4(uarthex)+2(uartstr)+2(uartchr)

        tasklist[DOORBELL_TASK]    = new_task(96, doorbell_task);

//      tasklist[DOORBELL_TASK]->fd[FILENO_STDOUT]= kopen((int)lcdpipe,pipedev);

        tasklist[DOORBELL_TASK]->fd[FILENO_STDERR]= kopen((int)txpipe, pipedev);

        tasklist[DOORBELL_TASK]->fd[FILENO_AUX] = kopen((int)pwmpipe,  pipedev);

        //

        tasklist[DISPLAY_TASK] = new_task(32, display_task);

        tasklist[DISPLAY_TASK]->fd[FILENO_STDIN] = kopen((int)lcdpipe,pipedev);

#endif

#endif

#ifdef  KEYPAD_TASK

        // Stack = 7 + 9(uwrite) + 2*4

        tasklist[KEYPAD_TASK] = new_task(32, keypad_task);

        tasklist[KEYPAD_TASK]->fd[FILENO_STDOUT] = kopen((int)keypipe,pipedev);

#endif

#ifdef  MENU_TASK

        // Stack = 18 + 10(showbell/shownow) + 9(uwrite) + 2(menu_readkey)

        //              + 18 (time_menu/dawn_menu/dusk_menu)

        tasklist[MENU_TASK] = new_task(72, menu_task);

        // tasklist[MENU_TASK]->fd[FILENO_STDIN] = kopen((int)keypipe,pipedev);

        tasklist[MENU_TASK]->fd[FILENO_STDOUT]= kopen((int)lcdpipe,pipedev);

        tasklist[MENU_TASK]->fd[FILENO_STDERR]= kopen((int)txpipe, pipedev);

#endif

}

// #define      HALF_HOUR_S     1800    // Seconds per half hour

// #define      HALF_HOUR_S     180     // Seconds per three minutes--for test

#define HALF_HOUR_S     30      // 3 Mins is to long, here's 3 seconds

#ifdef  MENU_TASK

unsigned        dawn = 0x060000, dusk = 0x180000;

#else

const unsigned  dawn = 0x060000, dusk = 0x180000;

#endif

void    shownow(unsigned now) { // Uses 10 stack slots + 8 for write()

        char    dmsg[9];

        dmsg[0] = PACK(0x1b,'[','j','T');

        dmsg[1] = PACK('i','m','e',':');

        dmsg[2] = PACK(' ',((now>>20)&0x3)+'0',

                        ((now>>16)&0xf)+'0',':');

        dmsg[3] = PACK( ((now>>12)&0xf)+'0',

                        ((now>> 8)&0xf)+'0',

                        ':',

                        ((now>> 4)&0xf)+'0');

        dmsg[4] = PACK( ((now    )&0xf)+'0',

                        0x1b, '[', '1');

        dmsg[5] = PACK(';','0','H',' ');

        if ((now < dawn)||(now > dusk)) {

                dmsg[6] = PACK('N','i','g','h');

                dmsg[7] = PACK('t',' ','t','i');

                dmsg[8] = PACK('m','e',0,0);

        } else {

                dmsg[6] = PACK('D','a','y','l');

                dmsg[7] = PACK('i','g','h','t');

                dmsg[8] = PACK('!',' ',0,0);

        } write(FILENO_STDOUT, dmsg, 9);

}

void    showbell(unsigned now) {        // Uses 10 stack slots + 8 for write()

        char    dmsg[9];

        dmsg[0] = PACK(0x1b,'[','j','T');

        dmsg[1] = PACK('i','m','e',':');

        dmsg[2] = PACK(' ',((now>>20)&0x3)+'0',

                        ((now>>16)&0xf)+'0',':');

        dmsg[3] = PACK( ((now>>12)&0xf)+'0',

                        ((now>> 8)&0xf)+'0',

                        ':',

                        ((now>> 4)&0xf)+'0');

        dmsg[4] = PACK( ((now    )&0xf)+'0',

                        0x1b, '[', '1');

        dmsg[5] = PACK(';','0','H',' ');

        dmsg[6] = PACK('D','o','o','r');

        dmsg[7] = PACK('b','e','l','l');

        dmsg[8] = PACK('!',' ',0,0);

        write(FILENO_STDOUT, dmsg, 9);

}

void    uartchr(char v) {

        if (write(FILENO_STDERR, &v, 1) != 1)

                write(FILENO_STDERR, "APPLE-PANIC", 11);

}

void    uartstr(const char *str) {

        int     cnt=0;

        while(str[cnt])

                cnt++;

        if (cnt != write(FILENO_STDERR, str, cnt))

                write(FILENO_STDERR, "PIPE-PANIC", 10);

}

void    uarthex(int num) {

        for(int ds=28; ds>=0; ds-=4) {

                int ch;

                ch = (num>>ds)&0x0f;

                if (ch >= 10)

                        ch = 'A'+ch-10;

                else

                        ch += '0';

                uartchr(ch);

        } uartstr("\r\n");

}

#ifdef DOORBELL_TASK

#include "../dev/samples.c"

void    belllight(unsigned now) {

        IOSPACE *sys = (IOSPACE *)IOADDR;

        if ((now < dawn)||(now > dusk))

                sys->io_spio = 0x088; // Turn our light on

        else

                sys->io_spio = 0x80; // Turn light off

}

void    doorbell_task(void) {

        // Controls LED 0x08

        // Start by initializing the display to GT Gisselquist\nTechnology

        // write(KFD_STDOUT, disp_build_backslash,sizeof(disp_build_backslash));

        // write(KFD_STDOUT, disp_build_gtlogo, sizeof(disp_build_gtlogo));

        // write(KFD_STDOUT, disp_reset_data, sizeof(disp_reset_data));

        // write(KFD_STDOUT, disp_gtech_data, sizeof(disp_gtech_data));

        IOSPACE *sys = (IOSPACE *)IOADDR;

        while(1) {

                int     event;

                // Initial state: doorbell is not ringing.  In this state, we

                // can wait forever for an event

                sys->io_spio = 0x080; // Turn our light off

                event = wait(INT_BUTTON|SWINT_PPS,-1);

#ifndef MENU_TASK

                unsigned when = rtcclock;

                if (event & INT_BUTTON)

                        showbell(when);

                else if (event & SWINT_PPS)

                        shownow(when);

#else

                if (event & INT_BUTTON)

                        post(SWINT_DOORBELL);

#endif

                while(event & INT_BUTTON) {

                        // Next state, the button has been pressed, the

                        // doorbell is ringing

                        // Seconds records the number of seconds since the

                        // button was last pressed.

                        int     seconds = 0;

                        // Check time: should we turn our light on or not?

                        belllight(rtcclock);

                        const int *sptr = sound_data;

                        // uartchr('N');

                        while(sptr < &sound_data[NSAMPLE_WORDS]) {

                                int     len = &sound_data[NSAMPLE_WORDS]-sptr;

                                if (len > 256)

                                        len = 256;

                                // We will stall here, if the audio FIFO is full

                                write(FILENO_AUX, sptr, len);

                                sptr += len;

                                // If the user presses the button more than

                                // once, we start the sound over as well as

                                // our light counter.

                                event = wait(INT_BUTTON|SWINT_PPS, 0);

                                if (event&INT_BUTTON) {

                                        if (sptr > &sound_data[1024]) {

                                                sptr = sound_data;

                                                seconds = 0;

#ifndef MENU_TASK

                                                when = (volatile unsigned)rtcclock;

                                                showbell(when);

#else

                                                post(SWINT_DOORBELL);

#endif

                                        }

                                } else if (event&SWINT_PPS) {

                                        seconds++;

                                        belllight(rtcclock);

#ifndef MENU_TASK

                                        showbell(when);

#endif

                                }

                        }

                        // Next state: the doorbell is no longer ringing, but

                        // we have yet to return to normal--the light is still

                        // on.

                        while((seconds < HALF_HOUR_S)&&

                                (((event=wait(INT_BUTTON|SWINT_PPS,-1))&INT_BUTTON)==0)) {

                                seconds++;

                                belllight(rtcclock);

#ifndef MENU_TASK

                                showbell(when);

#endif

                        }

                        if (event&INT_BUTTON) {

#ifndef MENU_TASK

                                when = (volatile unsigned)rtcclock;

                                showbell(when);

#endif

                        }

                }

        }

}

#endif

#ifdef  MENU_TASK

void    entered_menu_str(char *str, unsigned now,int pos) {

        //

        // Set current time

        //   xx:xx:xx

        //

        str[0] = PACK(0x1b, '[', '1',';');

        str[1] = PACK('0','H',' ',' ');

        str[2] = PACK(' ','x','x',':');

        str[3] = PACK('x','x',' ',' ');

        //str[3]=PACK('x','x',':','x');

        str[4] = PACK(' ','\0','\0','\0');

        if (pos>0) {

                int ch = ((now >> 20)&0x0f)+'0';

                str[2] &= ~0x0ff0000;

                str[2] |= (ch<<16);

                if (pos > 1) {

                        int ch = ((now >> 16)&0x0f)+'0';

                        str[2] &= ~0x0ff00;

                        str[2] |= (ch<<8);

                if (pos > 2) {

                        int ch = ((now >> 12)&0x0f)+'0';

                        str[3] &= ~0xff000000;

                        str[3] |= (ch<<24);

                if (pos > 3) {

                        int ch = ((now >> 8)&0x0f)+'0';

                        str[3] &= ~0x0ff0000;

                        str[3] |= (ch<<16);

                if (pos > 4) {

                        int ch = ((now >> 4)&0x0f)+'0';

                        str[3] &= ~0x0ff00;

                        str[3] |= ':'<<8;

                        str[3] &= ~0x0ff;

                        str[3] |= (ch);

                        if (pos > 5)

                                ch = (now&0x0f)+'0';

                        else

                                ch = 'x';

                        str[4] &= ~0x0ff000000;

                        str[4] |= (ch<<24);

        }}}}}

}

void    show_time_menu(unsigned when, int posn) {

        char    dmsg[10];

        dmsg[0] = PACK(0x1b,'[','j','S');

        dmsg[1] = PACK('e','t',' ','c');

        dmsg[2] = PACK('u','r','r','e');

        dmsg[3] = PACK('n','t',' ','t');

        dmsg[4] = PACK('i','m','e',':');

        entered_menu_str(&dmsg[5], when, posn);

        write(FILENO_STDOUT, dmsg, 9);

}

void    show_dawn_menu(unsigned when, int posn) {

        char    dmsg[10];

        dmsg[0] = PACK(0x1b,'[','j','S');

        dmsg[1] = PACK('e','t',' ','s');

        dmsg[2] = PACK('u','n','r','i');

        dmsg[3] = PACK('s','e',':','\0');

        entered_menu_str(&dmsg[4], when, posn);

        write(FILENO_STDOUT, dmsg, 8);

}

void    show_dusk_menu(unsigned when, int posn) {

        char    dmsg[10];

        dmsg[0] = PACK(0x1b,'[','j','S');

        dmsg[1] = PACK('e','t',' ','s');

        dmsg[2] = PACK('u','n','s','e');

        dmsg[3] = PACK('t',':','\0','\0');

        entered_menu_str(&dmsg[4], when, posn);

        write(FILENO_STDOUT, dmsg, 8);

}

int     menu_readkey(void) {

        int     key;

        wait(0,3);

        key = keypadread();

        keypad_wait_for_release();

        clear(INT_KEYPAD);

        return key;

}

void    time_menu(void) {

        int     timeout = 60;

        unsigned newclock = 0;

        for(int p=0; p<6; p++) {

                int     key, event;

                show_time_menu(newclock, p);

                do {

                        event = wait(SWINT_PPS|INT_KEYPAD,-1);

                        if (event&SWINT_PPS) {

                                timeout--;

                                if (timeout == 0)

                                        return;

                        } if (event&INT_KEYPAD) {

                                timeout = 60;

                                key = menu_readkey();

                                if ((key >= 0)&&(key < 10)) {

                                        int     sh;

                                        sh = (5-p)*4;

                                        newclock &= ~(0x0f<<sh);

                                        newclock |= (key<<sh);

                                } else if (key == 12) {

                                        if (p>=0)

                                                p--;

                                } else {

                                        if (p > 4)

                                                break;

                                        else

                                                return;

                                }

                        }

                } while(0==(event&INT_KEYPAD));

        }

        clear(SWINT_PPS);

        rtcclock = newclock;

        if (wait(SWINT_PPS, 1))

                rtcclock = newclock;

}

void    dawn_menu(void) {

        int     timeout = 60;

        unsigned newdawn = 0;

        for(int p=0; p<6; p++) {

                int     key, event;

                show_dawn_menu(newdawn, p);

                do {

                        event = wait(SWINT_PPS|INT_KEYPAD,-1);

                        if (event&SWINT_PPS) {

                                timeout--;

                                if (timeout == 0)

                                        return;

                        } if (event&INT_KEYPAD) {

                                timeout = 60;

                                key = menu_readkey();

                                if ((key >= 0)&&(key < 10)) {

                                        int     sh = (5-p)*4;

                                        newdawn &= ~(0x0f<<sh);

                                        newdawn |= key<<sh;

                                } else if (key == 12) {

                                        if (p>=0)

                                                p--;

                                } else {

                                        if (p > 4)

                                                break;

                                        else

                                                return;

                                }

                        }

                } while(0 == (event&INT_KEYPAD));

        } dawn = newdawn;

}

void    dusk_menu(void) {

        int     timeout = 60;

        unsigned newdusk = 0;

        for(int p=0; p<6; p++) {

                int     key, event;

                show_dusk_menu(newdusk, p);

                do {

                        event = wait(SWINT_PPS|INT_KEYPAD,-1);

                        if (event&SWINT_PPS) {

                                timeout--;

                                if (timeout == 0)

                                        return;

                        } if (event&INT_KEYPAD) {

                                key = menu_readkey();

                                if ((key >= 0)&&(key < 10)) {

                                        int     sh = (5-p)*4;

                                        newdusk &= ~(0x0f<<sh);

                                        newdusk |= key<<sh;

                                } else if (key == 12) {

                                        if (p>=0)

                                                p--;

                                } else {

                                        if (p > 4)

                                                break;

                                        else

                                                return;

                                }

                        }

                } while(0 == (event&INT_KEYPAD));

        } dusk = newdusk;

}

void    unknown_menu(void) {

        //      0123456789ABCDEF

        //      Unknown Cmd Key

        //      A/Tm B/Dwn C/Dsk

        char    dmsg[11];

        dmsg[0] = PACK(0x1b,'[','j','U');

        dmsg[1] = PACK('n','k','n','o');

        dmsg[2] = PACK('w','n',' ','C');

        dmsg[3] = PACK('m','d',' ','K');

        dmsg[4] = PACK('e','y','\0','\0');

        dmsg[5] = PACK(0x1b,'[','1',';');