Subversion Repositories scarts

## Process this file with automake to generate Makefile.in

AUTOMAKE_OPTIONS = 1.8 cygnus dejagnu

ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd

SUBDIRS = doc po

# Automake should figure this out on its own.  It doesn't, because

# of the "cygnus" option.  But distclean still wants it.

DIST_SUBDIRS = $(SUBDIRS)

tooldir = $(exec_prefix)/$(target_alias)

YACC = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L../bison/bison ; else echo @YACC@ ; fi`

LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo @LEX@ ; fi`

# We have to set this, because autoconf 2.59 does not substitute YFLAGS.

# Autoconf 2.61 does, so this can be removed when we upgrade.

YFLAGS =

WARN_CFLAGS = @WARN_CFLAGS@

NO_WERROR = @NO_WERROR@

AM_CFLAGS = $(WARN_CFLAGS)

MKDEP = gcc -MM

TARG_CPU = @target_cpu_type@

TARG_CPU_C = $(srcdir)/config/tc-@target_cpu_type@.c

TARG_CPU_O = tc-@target_cpu_type@.o

TARG_CPU_H = $(srcdir)/config/tc-@target_cpu_type@.h

OBJ_FORMAT_C = $(srcdir)/config/obj-@obj_format@.c

OBJ_FORMAT_O = obj-@obj_format@.o

OBJ_FORMAT_H = $(srcdir)/config/obj-@obj_format@.h

TARG_ENV_H = $(srcdir)/config/te-@te_file@.h

ATOF_TARG_C = $(srcdir)/config/atof-@atof@.c

ATOF_TARG_O = atof-@atof@.o

# use @target_cpu_type@ for refering to configured target name

IT_HDRS=itbl-parse.h $(srcdir)/itbl-ops.h

IT_SRCS=itbl-parse.c itbl-lex.c $(srcdir)/itbl-ops.c

IT_DEPS=$(srcdir)/itbl-parse.y $(srcdir)/itbl-lex.l $(srcdir)/config/itbl-@target_cpu_type@.h

IT_OBJS=itbl-parse.o itbl-lex.o itbl-ops.o

# CPU types.  This is only used for dependency information.

CPU_TYPES = \

        alpha \

        arc \

        arm \

        avr \

        bfin \

        cr16 \

        cris \

        crx \

        d10v \

        d30v \

        dlx \

        fr30 \

        frv \

        h8300 \

        hppa \

        i370 \

        i386 \

        i860 \

        i960 \

        ia64 \

        ip2k \

        m32c \

        m32r \

        m68hc11 \

        m68k \

        maxq \

        mcore \

        mep \

        mips \

        mmix \

        mn10200 \

        mn10300 \

        msp430 \

        mt \

        ns32k \

        openrisc \

        or32 \

        pdp11 \

        pj \

        ppc \

        s390 \

        score \

        sh \

        sh64 \

        sparc \

        scarts_16 \

        scarts_32 \

        spu \

        tic30 \

        tic4x \

        tic54x \

        v850 \

        vax \

        xc16x \

        xstormy16 \

        xtensa \

        z80 \

        z8k

# Object format types.  This is only used for dependency information.

# We deliberately omit SOM, since it does not work as a cross assembler.

OBJ_FORMATS = \

        aout \

        coff \

        ecoff \

        elf \

        evax

# This is an sh case which sets valid according to whether the CPU

# type in the shell variable c and the OS type in the shell variable o

# are supported.  This helps cuts down on the amount of dependency

# information.

CPU_OBJ_VALID = \

        valid= ; \

        case $$o in \

        aout) \

          case $$c in \

          arm | cris | i386 | m68k | ns32k | pdp11 | sparc | tic30 | vax) \

            valid=yes ;; \

          esac ;; \

        coff) \

          case $$c in \

          arm | h8300 | i386 | i960 | m68k | maxq | mcore | mips | or32 \

                | ppc | sh | sparc | tic* | xscale | z80 | z8k) \

            valid=yes ;; \

          esac ;; \

        ecoff) \

          case $$c in \

          mips | alpha) valid=yes ;; \

          esac ;; \

        elf) valid=yes ; \

          case $$c in \

          maxq | ns32k | tic* | z80 | z8k) valid= ;; \

          esac ;; \

        evax) \

          case $$c in \

          alpha) valid=yes ;; \

          esac ;; \

        vms) \

          case $$c in \

          vax) valid=yes ;; \

          esac ;; \

        esac;

# These are like CPU_TYPES and CPU_OBJ_VALID, for the obj=multi case.

MULTI_CPU_TYPES = i386 mips cris

MULTI_CPU_OBJ_VALID = \

        valid= ; \

        case $$o in \

        aout) \

          case $$c in \

          i386 | cris) valid=yes ;; \

          esac ;; \

        coff) \

          case $$c in \

          i386 | mips) valid=yes ;; \

          esac ;; \

        ecoff) \

          case $$c in \

          mips) valid=yes ;; \

          esac ;; \

        elf) valid=yes ;; \

        esac;

# Regular source files.

GAS_CFILES = \

        app.c \

        as.c \

        atof-generic.c \

        cond.c \

        depend.c \

        dwarf2dbg.c \

        dw2gencfi.c \

        ecoff.c \

        ehopt.c \

        expr.c \

        flonum-copy.c \

        flonum-konst.c \

        flonum-mult.c \

        frags.c \

        hash.c \

        input-file.c \

        input-scrub.c \

        listing.c \

        literal.c \

        macro.c \

        messages.c \

        output-file.c \

        read.c \

        remap.c \

        sb.c \

        stabs.c \

        subsegs.c \

        symbols.c \

        write.c

CFILES = $(GAS_CFILES) itbl-ops.c cgen.c

HFILES = \

        as.h \

        asintl.h \

        bignum.h \

        bit_fix.h \

        cgen.h \

        dwarf2dbg.h \

        dw2gencfi.h \

        ecoff.h \

        emul-target.h \

        emul.h \

        expr.h \

        flonum.h \

        frags.h \

        hash.h \

        input-file.h \

        itbl-lex.h \

        itbl-ops.h \

        listing.h \

        macro.h \

        obj.h \

        output-file.h \

        read.h \

        sb.h \

        struc-symbol.h \

        subsegs.h \

        symbols.h \

        tc.h \

        write.h

# CPU files in config.

TARGET_CPU_CFILES = \

        config/tc-alpha.c \

        config/tc-arc.c \

        config/tc-arm.c \

        config/tc-avr.c \

        config/tc-bfin.c \

        config/tc-cr16.c \

        config/tc-cris.c \

        config/tc-crx.c \

        config/tc-d10v.c \

        config/tc-d30v.c \

        config/tc-dlx.c \

        config/tc-fr30.c \

        config/tc-frv.c \

        config/tc-h8300.c \

        config/tc-hppa.c \

        config/tc-ia64.c \

        config/tc-i370.c \

        config/tc-i386.c \

        config/tc-i860.c \

        config/tc-i960.c \

        config/tc-ip2k.c \

        config/tc-iq2000.c \

        config/tc-m32c.c \

        config/tc-m32r.c \

        config/tc-m68hc11.c \

        config/tc-m68k.c \

        config/tc-maxq.c \

        config/tc-mcore.c \

        config/tc-mep.c \

        config/tc-mips.c \

        config/tc-mmix.c \

        config/tc-mn10200.c \

        config/tc-mn10300.c \

        config/tc-msp430.c \

        config/tc-mt.c \

        config/tc-ns32k.c \

        config/tc-openrisc.c \

        config/tc-or32.c \

        config/tc-pdp11.c \

        config/tc-pj.c \

        config/tc-ppc.c \

        config/tc-s390.c \

        config/tc-score.c \

        config/tc-sh.c \

        config/tc-sh64.c \

        config/tc-sparc.c \

        config/tc-scarts_16.c \

        config/tc-scarts_32.c \

        config/tc-spu.c \

        config/tc-tic30.c \

        config/tc-tic4x.c \

        config/tc-tic54x.c \

        config/tc-vax.c \

        config/tc-v850.c \

        config/tc-xstormy16.c \

        config/tc-xc16x.c \

        config/tc-xtensa.c \

        config/tc-z80.c \

        config/tc-z8k.c \

        config/xtensa-relax.c

TARGET_CPU_HFILES = \

        config/tc-alpha.h \

        config/tc-arc.h \

        config/tc-arm.h \

        config/tc-avr.h \

        config/tc-bfin.h \

        config/tc-cr16.h \

        config/tc-cris.h \

        config/tc-crx.h \

        config/tc-d10v.h \

        config/tc-d30v.h \

        config/tc-dlx.h \

        config/tc-fr30.h \

        config/tc-frv.h \

        config/tc-h8300.h \

        config/tc-hppa.h \

        config/tc-ia64.h \

        config/tc-i370.h \

        config/tc-i386.h \

        config/tc-i860.h \

        config/tc-i960.h \

        config/tc-ip2k.h \

        config/tc-iq2000.h \

        config/tc-m32c.h \

        config/tc-m32r.h \

        config/tc-m68hc11.h \

        config/tc-m68k.h \

        config/tc-maxq.h \

        config/tc-mcore.h \

        config/tc-mep.h \

        config/tc-mips.h \

        config/tc-mmix.h \

        config/tc-mn10200.h \

        config/tc-mn10300.h \

        config/tc-msp430.h \

        config/tc-mt.h \

        config/tc-ns32k.h \

        config/tc-openrisc.h \

        config/tc-or32.h \

        config/tc-pdp11.h \

        config/tc-pj.h \

        config/tc-ppc.h \

        config/tc-s390.h \

        config/tc-score.h \

        config/tc-sh.h \

        config/tc-sh64.h \

        config/tc-sparc.h \

        config/tc-scarts_16.h \

        config/tc-scarts_32.h \

        config/tc-spu.h \

        config/tc-tic30.h \

        config/tc-tic4x.h \

        config/tc-tic54x.h \

        config/tc-vax.h \

        config/tc-v850.h \

        config/tc-xstormy16.h \

        config/tc-xc16x.h \

        config/tc-xtensa.h \

        config/tc-z80.h \

        config/tc-z8k.h \

        config/xtensa-relax.h

# OBJ files in config

OBJ_FORMAT_CFILES = \

        config/obj-aout.c \

        config/obj-coff.c \

        config/obj-ecoff.c \

        config/obj-elf.c \

        config/obj-evax.c \

        config/obj-fdpicelf.c \

        config/obj-som.c

OBJ_FORMAT_HFILES = \

        config/obj-aout.h \

        config/obj-coff.h \

        config/obj-ecoff.h \

        config/obj-elf.h \

        config/obj-evax.h \

        config/obj-fdpicelf.h \

        config/obj-som.h

# Emulation header files in config

TARG_ENV_HFILES = \

        config/te-386bsd.h \

        config/te-aix5.h \

        config/te-armeabi.h \

        config/te-armlinuxeabi.h \

        config/te-dynix.h \

        config/te-epoc-pe.h \

        config/te-freebsd.h \

        config/te-generic.h \

        config/te-gnu.h \

        config/te-go32.h \

        config/te-hppa.h \

        config/te-hppa64.h \

        config/te-hppalinux64.h \

        config/te-i386aix.h \

        config/te-ia64aix.h \

        config/te-interix.h \

        config/te-lnews.h \

        config/te-lynx.h \

        config/te-mach.h \

        config/te-macos.h \

        config/te-nbsd.h \

        config/te-nbsd532.h \

        config/te-netware.h \

        config/te-pc532mach.h \

        config/te-pe.h \

        config/te-psos.h \

        config/te-riscix.h \

        config/te-solaris.h \

        config/te-sparcaout.h \

        config/te-sun3.h \

        config/te-svr4.h \

        config/te-symbian.h \

        config/te-tmips.h \

        config/te-vxworks.h \

        config/te-wince-pe.h

# Multi files in config

MULTI_CFILES = \

        config/e-crisaout.c \

        config/e-criself.c \

        config/e-i386aout.c \

        config/e-i386coff.c \

        config/e-i386elf.c \

        config/e-mipsecoff.c \

        config/e-mipself.c

CONFIG_OBJS = \

        $(TARG_CPU_O) \

        $(OBJ_FORMAT_O) \

        $(ATOF_TARG_O) \

        $(extra_objects)

GENERIC_OBJS = \

        app.o \

        as.o \

        atof-generic.o \

        cond.o \

        depend.o \

        dwarf2dbg.o \

        dw2gencfi.o \

        ehopt.o \

        expr.o \

        flonum-konst.o \

        flonum-copy.o \

        flonum-mult.o \

        frags.o \

        hash.o \

        input-file.o \

        input-scrub.o \

        literal.o \

        messages.o \

        output-file.o \

        read.o \

        remap.o \

        subsegs.o \

        symbols.o \

        write.o \

        listing.o \

        ecoff.o \

        stabs.o \

        sb.o \

        macro.o

CONFIG_ATOF_CFILES = \

        config/atof-ieee.c \

        config/atof-vax.c

OBJS = $(CONFIG_OBJS) $(GENERIC_OBJS)

POTFILES = $(MULTI_CFILES) $(CONFIG_ATOF_CFILES) $(TARG_ENV_HFILES) $(OBJ_FORMAT_HFILES) \

        $(OBJ_FORMAT_CFILES) $(TARGET_CPU_HFILES) $(TARGET_CPU_CFILES) \

        $(HFILES) $(CFILES)

po/POTFILES.in: @MAINT@ Makefile

        for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \

          && mv tmp $(srcdir)/po/POTFILES.in

# Note: GASP is now deprecated and has been removed.  It is still

# available in the CVS archive or older binutils releases if it is needed.

noinst_PROGRAMS = as-new

noinst_SCRIPTS = $(GDBINIT)

EXTRA_SCRIPTS = .gdbinit

EXTRA_DIST = m68k-parse.c itbl-parse.c itbl-parse.h itbl-lex.c \

        bfin-parse.c bfin-parse.h bfin-lex.c

diststuff: $(EXTRA_DIST) info

all: info

DISTCLEANFILES = targ-cpu.h obj-format.h targ-env.h itbl-cpu.h cgen-desc.h

# Now figure out from those variables how to compile and link.

BASEDIR = $(srcdir)/..

BFDDIR = $(BASEDIR)/bfd

INCDIR = $(BASEDIR)/include

# This is the variable actually used when we compile.

# Specify the directories to be searched for header files.

# Both . and srcdir are used, in that order,

# so that tm.h and config.h will be found in the compilation

# subdirectory rather than in the source directory.

INCLUDES = -I. -I$(srcdir) -I../bfd -I$(srcdir)/config \

        -I$(INCDIR) -I$(srcdir)/.. -I$(BFDDIR) @INCINTL@ \

        -DLOCALEDIR="\"$(datadir)/locale\""

# This should be parallel to INCLUDES, but should replace $(srcdir)

# with $${srcdir}, and should work in a subdirectory.  This is used

# when building dependencies, because the dependency building is done

# in a subdirectory.

DEP_INCLUDES = -I.. -I$${srcdir} -I../../bfd \

        -I$${srcdir}/config -I$${srcdir}/../include -I$${srcdir}/.. \

        -I$${srcdir}/../bfd @INCINTL@ \

        -DLOCALEDIR="\"$(datadir)/locale\""

DEP_FLAGS = -DOBJ_MAYBE_ELF \

        -I. -I.. -I$${srcdir} -I../../bfd $(DEP_INCLUDES)

# How to link with both our special library facilities

# and the system's installed libraries.

GASLIBS = @OPCODES_LIB@ ../bfd/libbfd.la ../libiberty/libiberty.a

# Files to be copied away after each stage in building.

STAGESTUFF = *.o $(noinst_PROGRAMS)

as_new_SOURCES = $(GAS_CFILES)

as_new_LDADD = $(TARG_CPU_O) $(OBJ_FORMAT_O) $(ATOF_TARG_O) \

        $(extra_objects) $(GASLIBS) $(LIBINTL) $(LIBM)

as_new_DEPENDENCIES = $(TARG_CPU_O) $(OBJ_FORMAT_O) $(ATOF_TARG_O) \

        $(extra_objects) $(GASLIBS) $(LIBINTL_DEP)

# Stuff that every object file depends upon.  If anything is removed

# from this list, remove it from dep-in.sed as well.

$(OBJS): ../bfd/bfd.h $(INCDIR)/symcat.h \

        $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h $(INCDIR)/progress.h \

        $(INCDIR)/fopen-same.h $(INCDIR)/fopen-bin.h $(INCDIR)/fopen-vms.h \

        $(OBJ_FORMAT_H) $(TARG_CPU_H) $(TARG_ENV_H) \

        as.h asintl.h bignum.h bit_fix.h config.h emul.h expr.h flonum.h \

        frags.h hash.h listing.h obj.h read.h symbols.h tc.h write.h

EXPECT = expect

RUNTEST = runtest

RUNTESTFLAGS=

check-DEJAGNU: site.exp

        if [ -d testsuite ]; then \

          true; \

        else \

          mkdir testsuite; \

        fi

        rm -f testsuite/site.exp

        cp site.exp testsuite/site.exp

        rootme=`pwd`; export rootme; \

        srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \

        EXPECT=${EXPECT} ; export EXPECT ; \

        runtest=$(RUNTEST); \

        cd testsuite; \

        if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \

          $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \

                $(RUNTESTFLAGS); \

        else echo "WARNING: could not find \`runtest'" 1>&2; :;\

        fi

# The implicit .c.o rule doesn't work for these, perhaps because of

# the variables, or perhaps because the sources are not on vpath.

$(TARG_CPU_O): $(TARG_CPU_C)

        $(COMPILE) -c $(TARG_CPU_C)

$(ATOF_TARG_O): $(ATOF_TARG_C)

        $(COMPILE) -c $(ATOF_TARG_C)

# ecoff.c only has full dependencies when ECOFF_DEBUGGING is defined,

# so the automatic dependency stuff doesn't work.

ecoff.o : ecoff.c ecoff.h $(INCDIR)/coff/internal.h $(INCDIR)/coff/sym.h \

        $(INCDIR)/coff/ecoff.h $(INCDIR)/coff/symconst.h \

        $(INCDIR)/aout/stab_gnu.h

# We need all these explicit rules for the multi stuff.  Because of

# these rules, we don't need one for OBJ_FORMAT_O.

obj-aout.o : $(srcdir)/config/obj-aout.c $(DEP_@target_cpu_type@_aout)

        $(COMPILE) -c $(srcdir)/config/obj-aout.c

obj-coff.o: $(srcdir)/config/obj-coff.c $(DEP_@target_cpu_type@_coff)

        $(COMPILE) -c $(srcdir)/config/obj-coff.c

obj-ecoff.o : $(srcdir)/config/obj-ecoff.c $(DEP_@target_cpu_type@_ecoff)

        $(COMPILE) -c $(srcdir)/config/obj-ecoff.c

obj-elf.o : $(srcdir)/config/obj-elf.c $(DEP_@target_cpu_type@_elf)

        $(COMPILE) -c $(srcdir)/config/obj-elf.c

obj-evax.o : $(srcdir)/config/obj-evax.c

        $(COMPILE) -c $(srcdir)/config/obj-evax.c

obj-fdpicelf.o : $(srcdir)/config/obj-fdpicelf.c

        $(COMPILE) -c $(srcdir)/config/obj-fdpicelf.c

obj-multi.o : $(srcdir)/config/obj-multi.c

        $(COMPILE) -c $(srcdir)/config/obj-multi.c

obj-som.o : $(srcdir)/config/obj-som.c

        $(COMPILE) -c $(srcdir)/config/obj-som.c

e-mipself.o : $(srcdir)/config/e-mipself.c

        $(COMPILE) -c $(srcdir)/config/e-mipself.c

e-mipsecoff.o : $(srcdir)/config/e-mipsecoff.c

        $(COMPILE) -c $(srcdir)/config/e-mipsecoff.c

e-i386aout.o: $(srcdir)/config/e-i386aout.c

        $(COMPILE) -c $(srcdir)/config/e-i386aout.c

e-i386coff.o: $(srcdir)/config/e-i386coff.c

        $(COMPILE) -c $(srcdir)/config/e-i386coff.c

e-i386elf.o: $(srcdir)/config/e-i386elf.c

        $(COMPILE) -c $(srcdir)/config/e-i386elf.c

e-crisaout.o: $(srcdir)/config/e-crisaout.c

        $(COMPILE) -c $(srcdir)/config/e-crisaout.c

e-criself.o: $(srcdir)/config/e-criself.c

        $(COMPILE) -c $(srcdir)/config/e-criself.c

xtensa-relax.o: $(srcdir)/config/xtensa-relax.c

        $(COMPILE) -c $(srcdir)/config/xtensa-relax.c

# The m68k operand parser.

EXTRA_as_new_SOURCES = config/m68k-parse.y config/bfin-parse.y

# If m68k-parse.y is in a different directory, then ylwrap will use an

# absolute path when it invokes yacc, which will cause yacc to put the

# absolute path into the generated file.  That's a pain when it comes

# to generating snapshots, because it introduces spurious diffs.

# Since when we make the snapshots $(srcdir) = ".", we check for that

# case and handle it differently.  This means that anybody who

# configures with $(srcdir) = "." will have to set their path in the

# debugger if they want to debug m68k-parse.y.  This is bad, but on

# the other hand it's good that people who use the prebuilt

# m68k-parse.c don't get a spurious absolute path.

m68k-parse.c: $(srcdir)/config/m68k-parse.y

        f=$(srcdir)/config/m68k-parse.y; \

        if [ $$f = "./config/m68k-parse.y" ]; then \

          ln -s config/m68k-parse.y . > /dev/null 2>/dev/null || \

           ln config/m68k-parse.y . > /dev/null 2>/dev/null || \

           cp config/m68k-parse.y . >/dev/null 2>/dev/null; \

          f=m68k-parse.y; \

        else true; fi; \

        $(SHELL) $(YLWRAP) $$f y.tab.c m68k-parse.c -- $(YACCCOMPILE); \

        if [ $$f = "m68k-parse.y" ]; then \

          rm -f m68k-parse.y; \

        else true; fi

# Disable -Werror, if it has been enabled, since old versions of bison/

# yacc will produce working code which contain compile time warnings.

m68k-parse.o: m68k-parse.c $(srcdir)/config/m68k-parse.h

        $(COMPILE) -c $< $(NO_WERROR)

# Don't let the .y.h rule clobber m68k-parse.h.

m68k-parse.h: ; @true

$(srcdir)/config/m68k-parse.h: ; @true

bfin-parse.c: $(srcdir)/config/bfin-parse.y

        $(SHELL) $(YLWRAP) $(srcdir)/config/bfin-parse.y y.tab.c bfin-parse.c y.tab.h bfin-parse.h -- $(YACCCOMPILE) -d ;

bfin-parse.h: bfin-parse.c

bfin-parse.o: bfin-parse.c bfin-parse.h $(srcdir)/config/bfin-defs.h \

 $(INCDIR)/elf/common.h $(INCDIR)/elf/bfin.h $(BFDDIR)/libbfd.h

bfin-defs.h: ; @true

$(srcdir)/config/bfin-defs.h: ; @true

bfin-lex.c: $(srcdir)/config/bfin-lex.l

        $(SHELL) $(YLWRAP) $(srcdir)/config/bfin-lex.l lex.yy.c bfin-lex.c -- $(LEXCOMPILE)

bfin-lex.o: bfin-lex.c bfin-parse.h $(srcdir)/config/bfin-defs.h

        $(COMPILE) -c $< $(NO_WERROR)

# The instruction table specification lexical analyzer and parser.

itbl-lex.c: $(srcdir)/itbl-lex.l

# Disable -Werror, if it has been enabled, since old versions of bison/

# yacc will produce working code which contain compile time warnings.

itbl-lex.o: itbl-lex.c itbl-parse.h $(srcdir)/itbl-lex.h

        $(COMPILE) -c $< $(NO_WERROR)

# Disable -Werror, if it has been enabled, since old versions of bison/

# yacc will produce working code which contain compile time warnings.

itbl-parse.o: itbl-parse.c itbl-parse.h $(srcdir)/itbl-ops.h $(srcdir)/itbl-lex.h

        $(COMPILE) -c $< $(NO_WERROR)

itbl-ops.o: $(srcdir)/itbl-ops.c $(srcdir)/itbl-ops.h itbl-parse.h

itbl-parse.c itbl-parse.h: $(srcdir)/itbl-parse.y

        $(SHELL) $(YLWRAP) $(srcdir)/itbl-parse.y y.tab.c itbl-parse.c y.tab.h itbl-parse.h -- $(YACCCOMPILE) -d

# stand-alone itbl assembler & disassembler

EXTRA_PROGRAMS = itbl-test

itbl_test_SOURCES = itbl-parse.y itbl-lex.l

itbl_test_LDADD = itbl-tops.o itbl-test.o $(GASLIBS) @LEXLIB@

itbl-tops.o: $(srcdir)/itbl-ops.c $(srcdir)/itbl-ops.h itbl-parse.h

        $(COMPILE) -o itbl-tops.o -DSTAND_ALONE -c $(srcdir)/itbl-ops.c

itbl-test.o: $(srcdir)/testsuite/gas/all/itbl-test.c $(srcdir)/itbl-ops.h

        $(COMPILE) -c -DSTAND_ALONE $(srcdir)/testsuite/gas/all/itbl-test.c

# CGEN interface.

CGEN_CPU_PREFIX = @cgen_cpu_prefix@

cgen.o: cgen.c cgen.h cgen-desc.h subsegs.h \

        $(INCDIR)/obstack.h $(INCDIR)/opcode/cgen.h \

        $(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-desc.h \

        $(srcdir)/../opcodes/$(CGEN_CPU_PREFIX)-opc.h

# Remake the info files.

MOSTLYCLEANFILES = $(STAGESTUFF) core \

        testsuite/*.o testsuite/*.out testsuite/gas.log testsuite/gas.sum \

        testsuite/site.exp site.bak site.exp stage stage1 stage2

CLEANFILES = dep.sed DEPTC DEPTCA DEPOBJ DEPOBJA DEP2 DEP2A DEP1 DEPA DEP DEPDIR

.PHONY: install-html install-html-am install-html-recursive

install-html:   install-html-recursive

install-html-recursive:

        @failcom='exit 1'; \

        for f in x $$MAKEFLAGS; do \

          case $$f in \

            *=* | --[!k]*);; \

            *k*) failcom='fail=yes';; \

          esac; \

        done; \

        dot_seen=no; \

        target=`echo $@ | sed s/-recursive//`; \

        list='$(SUBDIRS)'; for subdir in $$list; do \

          echo "Making $$target in $$subdir"; \

          if test "$$subdir" = "."; then \

            dot_seen=yes; \

            local_target="$$target-am"; \

          else \

            local_target="$$target"; \

          fi; \

          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

          || eval $$failcom; \

        done; \

        if test "$$dot_seen" = "no"; then \

          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \

        fi; test -z "$$fail"

.PHONY: install-exec-local install-data-local

.PHONY: install-exec-bindir install-exec-tooldir

install-exec-local: install-exec-bindir @install_tooldir@

install-exec-bindir: $(noinst_PROGRAMS)

        $(mkinstalldirs) $(DESTDIR)$(bindir)

        @list='$(noinst_PROGRAMS)'; for p in $$list; do \

          if test -f $$p; then \

            echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed -e 's/$(EXEEXT)$$//' -e 's/-new//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \

            $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/$(EXEEXT)$$//' -e 's/-new//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \

          else :; fi; \

        done

install-exec-tooldir: install-exec-bindir $(noinst_PROGRAMS)

        $(mkinstalldirs) $(DESTDIR)$(tooldir)/bin

        n=`echo as | sed '$(transform)'`; \

        if [ "$(bindir)/$$n$(EXEEXT)" != "$(tooldir)/bin/as$(EXEEXT)" ]; then \

          rm -f $(DESTDIR)$(tooldir)/bin/as$(EXEEXT); \

          ln $(DESTDIR)$(bindir)/$$n$(EXEEXT) $(DESTDIR)$(tooldir)/bin/as$(EXEEXT) >/dev/null 2>/dev/null \

            || $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) as-new$(EXEEXT) $(DESTDIR)$(tooldir)/bin/as$(EXEEXT); \

        else \

          true ; \

        fi

# These exist for maintenance purposes.

.PHONY: bootstrap bootstrap2 bootstrap3 stage1 stage2 stage3 comparison

bootstrap: as-new

        $(MAKE) stage1

        rm -f stage && ln -s stage1 stage

        $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)

        $(MAKE) stage2

        rm -f stage && ln -s stage2 stage

        $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)

        $(MAKE) comparison against=stage2

bootstrap2:

        rm -f stage && ln -s stage1 stage

        $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)

        $(MAKE) stage2

        rm -f stage && ln -s stage2 stage

        $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)

        $(MAKE) comparison against=stage2

bootstrap3:

        rm -f stage && ln -s stage2 stage

        $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(noinst_PROGRAMS)

        $(MAKE) comparison against=stage2

# Copy the object files from a particular stage into a subdirectory.

stage1:

        -mkdir stage1

        -mv $(STAGESTUFF) stage1

        if [ -f stage1/as-new$(EXEEXT) -a ! -f stage1/as$(EXEEXT) ] ; then (cd stage1 ; ln -s as-new$(EXEEXT) as$(EXEEXT)) ; fi

stage2:

        -mkdir stage2

        -mv $(STAGESTUFF) stage2

        if [ -f stage2/as-new$(EXEEXT) -a ! -f stage2/as$(EXEEXT) ] ; then (cd stage2 ; ln -s as-new$(EXEEXT) as$(EXEEXT)) ; fi

stage3:

        -mkdir stage3

        -mv $(STAGESTUFF) stage3

        if [ -f stage3/as-new$(EXEEXT) -a ! -f stage3/as$(EXEEXT) ] ; then (cd stage3 ; ln -s as-new as$(EXEEXT)) ; fi

against=stage2

# This rule is derived from corresponding code in the Makefile.in for gcc.

# The "tail +16c" is to bypass headers which may include timestamps or

# temporary assembly file names.

comparison:

        x=0 ; \

        for file in *.o ; do \

          tail +16c ./$$file > tmp-foo1; \

          if tail +16c ${against}/$$file > tmp-foo2 2>/dev/null ; then \

            if cmp tmp-foo1 tmp-foo2 ; then \

              true ; \

            else \

              echo $$file differs ; \

              x=1 ; \

            fi ; \

          else true; fi ; \

        done ; \

        exit $$x

        -rm -f tmp-foo*

.PHONY: de-stage1 de-stage2 de-stage3

de-stage1:

        - (cd stage1 ; rm -f as$(EXEEXT) ; mv -f * ..)

        - rmdir stage1

de-stage2:

        - (cd stage2 ; rm -f as$(EXEEXT) ; mv -f * ..)

        - rmdir stage2

de-stage3:

        - (cd stage3 ; rm -f as$(EXEEXT) ; mv -f * ..)

        - rmdir stage3

DEP_FILE_DEPS =  $(CFILES) $(HFILES) $(TARGET_CPU_CFILES) \

        $(TARGET_CPU_HFILES) $(OBJ_FORMAT_CFILES) $(OBJ_FORMAT_HFILES)

CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in $(srcdir)/configure.tgt

# Automatic dependency computation.  This is a real pain, because the

# dependencies change based on target_cpu_type and obj_format.

# Just to make things even more complicated, automake separates the

# dependency variable assignments from the dependency rules, and tacks

# on a .NOEXPORT at the end of Makefile.in.

DEP: dep.sed $(DEP_FILE_DEPS) DEPTC DEPOBJ DEP2

        rm -f DEP1 # delete because we use $? in DEP1 rule

        srcdir=`cd $(srcdir); pwd`; \

        $(MAKE) MKDEP="$(MKDEP)" srcdir="$${srcdir}" VPATH="$${srcdir}" DEP1

        rm -rf DEPDIR

        echo 'AMKDEP = #DO NOT PUT ANYTHING BETWEEN THIS LINE AND THE MATCHING WARNING BELOW.' > DEPA

        sed -f dep.sed < DEPTC >> DEPA

        sed -f dep.sed < DEPOBJ >> DEPA

        sed -f dep.sed < DEP2 >> DEPA

        echo 'BMKDEP = #DO NOT PUT ANYTHING BETWEEN THIS LINE AND THE MATCHING WARNING ABOVE.' >> DEPA

        echo '#MKDEP    DO NOT PUT ANYTHING BETWEEN THIS LINE AND THE MATCHING WARNING BELOW.' >> DEPA

        sed -f dep.sed < DEP1 >> DEPA

        echo '$$(OBJS): $$(DEP_@target''_cpu_type@_@obj''_format@)' >> DEPA

        echo '$$(TARG_CPU_O): $$(DEPTC_@target''_cpu_type@_@obj''_format@)' >> DEPA

        echo '$$(OBJ_FORMAT_O): $$(DEPOBJ_@target''_cpu_type@_@obj''_format@)' >> DEPA

        echo '#MKDEP    DO NOT PUT ANYTHING BETWEEN THIS LINE AND THE MATCHING WARNING ABOVE.' >> DEPA

        if grep ' /' DEPA > /dev/null 2> /dev/null; then \

          echo 'make DEP failed!'; exit 1; \

        else \

          mv -f DEPA $@; \

        fi

DEP1: $(CFILES) $(MULTI_CFILES)

        if [ -d DEPDIR ]; then true; else mkdir DEPDIR; fi

        srcdir=`cd $(srcdir); pwd`; \

        cd DEPDIR; \

        echo '' > targ-cpu.h; \

        echo '' > obj-format.h; \

        echo '' > targ-env.h; \

        echo '' > itbl-cpu.h; \

        echo '' > itbl-parse.h; \

        $(MKDEP) $(DEP_FLAGS) $? > DEP

        mv -f DEPDIR/DEP $@

# Work out the special dependencies for the tc-*.c files.

DEPTC: $(TARGET_CPU_CFILES)

        rm -f DEPTCA

        if [ -d DEPDIR ]; then true; else mkdir DEPDIR; fi

        srcdir=`cd $(srcdir); pwd`; \

        cd DEPDIR; \

        for c in $(CPU_TYPES); do \

          for o in $(OBJ_FORMATS); do \

            $(CPU_OBJ_VALID) \

            if [ x$${valid} = xyes ]; then \

              echo '#include "tc-'"$${c}"'.h"' > targ-cpu.h; \

              echo '#include "obj-'"$${o}"'.h"' > obj-format.h; \

              echo '#include "te-generic.h"' > targ-env.h; \

              echo '' > itbl-cpu.h; \

              echo '' > itbl-parse.h; \

              if [ -f $${srcdir}/opcodes/$${c}-desc.h ]; then \

                echo '#include "opcodes/'"$${c}"'-desc.h"' > cgen-desc.h; \

              else \

                echo '' > cgen-desc.h; \

              fi ;\

              rm -f dummy.c; \

              cp $${srcdir}/config/tc-$${c}.c dummy.c; \

              $(MKDEP) $(DEP_FLAGS) dummy.c | \

                sed -e "s/dummy.o: dummy.c/DEPTC_$${c}_$${o} =/" >> ../DEPTCA; \

              rm -f dummy.c; \

            else true; fi; \

          done; \

        done

        echo 'DEPTC_hppa_som = $$(srcdir)/config/tc-hppa.h subsegs.h \' >> DEPTCA

        echo '  $$(INCDIR)/obstack.h $$(BFDDIR)/libhppa.h \' >> DEPTCA

        echo '  $$(INCDIR)/opcode/hppa.h $$(BFDDIR)/som.h' >> DEPTCA

        for c in $(MULTI_CPU_TYPES); do \

          echo "DEPTC_$${c}"'_multi = \' >> DEPTCA; \

          for o in $(OBJ_FORMATS); do \

            $(MULTI_CPU_OBJ_VALID) \

            if [ x$${valid} = xyes ]; then \

              echo '$$(DEPTC_'"$${c}_$${o}"') \' >> DEPTCA; \

            else true; fi; \

          done; \

          echo '' >> DEPTCA; \

        done

        mv -f DEPTCA DEPTC

# Work out the special dependencies for the obj-*.c files.