Subversion Repositories scarts

@c Copyright 1991, 1992, 1993, 1994, 1995, 1997, 1999, 2000, 2001,

@c 2002, 2003, 2004

@c Free Software Foundation, Inc.

@c This is part of the GAS manual.

@c For copying conditions, see the file as.texinfo.

@ifset GENERIC

@page

@node MIPS-Dependent

@chapter MIPS Dependent Features

@end ifset

@ifclear GENERIC

@node Machine Dependencies

@chapter MIPS Dependent Features

@end ifclear

@cindex MIPS processor

@sc{gnu} @code{@value{AS}} for @sc{mips} architectures supports several

different @sc{mips} processors, and MIPS ISA levels I through V, MIPS32,

and MIPS64.  For information about the @sc{mips} instruction set, see

@cite{MIPS RISC Architecture}, by Kane and Heindrich (Prentice-Hall).

For an overview of @sc{mips} assembly conventions, see ``Appendix D:

Assembly Language Programming'' in the same work.

@menu

* MIPS Opts::           Assembler options

* MIPS Object::         ECOFF object code

* MIPS Stabs::          Directives for debugging information

* MIPS ISA::            Directives to override the ISA level

* MIPS symbol sizes::   Directives to override the size of symbols

* MIPS autoextend::     Directives for extending MIPS 16 bit instructions

* MIPS insn::           Directive to mark data as an instruction

* MIPS option stack::   Directives to save and restore options

* MIPS ASE instruction generation overrides:: Directives to control

                        generation of MIPS ASE instructions

* MIPS floating-point:: Directives to override floating-point options

@end menu

@node MIPS Opts

@section Assembler options

The @sc{mips} configurations of @sc{gnu} @code{@value{AS}} support these

special options:

@table @code

@cindex @code{-G} option (MIPS)

@item -G @var{num}

This option sets the largest size of an object that can be referenced

implicitly with the @code{gp} register.  It is only accepted for targets

that use @sc{ecoff} format.  The default value is 8.

@cindex @code{-EB} option (MIPS)

@cindex @code{-EL} option (MIPS)

@cindex MIPS big-endian output

@cindex MIPS little-endian output

@cindex big-endian output, MIPS

@cindex little-endian output, MIPS

@item -EB

@itemx -EL

Any @sc{mips} configuration of @code{@value{AS}} can select big-endian or

little-endian output at run time (unlike the other @sc{gnu} development

tools, which must be configured for one or the other).  Use @samp{-EB}

to select big-endian output, and @samp{-EL} for little-endian.

@item -KPIC

@cindex PIC selection, MIPS

@cindex @option{-KPIC} option, MIPS

Generate SVR4-style PIC.  This option tells the assembler to generate

SVR4-style position-independent macro expansions.  It also tells the

assembler to mark the output file as PIC.

@item -mvxworks-pic

@cindex @option{-mvxworks-pic} option, MIPS

Generate VxWorks PIC.  This option tells the assembler to generate

VxWorks-style position-independent macro expansions.

@cindex MIPS architecture options

@item -mips1

@itemx -mips2

@itemx -mips3

@itemx -mips4

@itemx -mips5

@itemx -mips32

@itemx -mips32r2

@itemx -mips64

@itemx -mips64r2

Generate code for a particular MIPS Instruction Set Architecture level.

@samp{-mips1} corresponds to the @sc{r2000} and @sc{r3000} processors,

@samp{-mips2} to the @sc{r6000} processor, @samp{-mips3} to the

@sc{r4000} processor, and @samp{-mips4} to the @sc{r8000} and

@sc{r10000} processors.  @samp{-mips5}, @samp{-mips32}, @samp{-mips32r2},

@samp{-mips64}, and @samp{-mips64r2}

correspond to generic

@sc{MIPS V}, @sc{MIPS32}, @sc{MIPS32 Release 2}, @sc{MIPS64},

and @sc{MIPS64 Release 2}

ISA processors, respectively.  You can also switch

instruction sets during the assembly; see @ref{MIPS ISA, Directives to

override the ISA level}.

@item -mgp32

@itemx -mfp32

Some macros have different expansions for 32-bit and 64-bit registers.

The register sizes are normally inferred from the ISA and ABI, but these

flags force a certain group of registers to be treated as 32 bits wide at

all times.  @samp{-mgp32} controls the size of general-purpose registers

and @samp{-mfp32} controls the size of floating-point registers.

The @code{.set gp=32} and @code{.set fp=32} directives allow the size

of registers to be changed for parts of an object. The default value is

restored by @code{.set gp=default} and @code{.set fp=default}.

On some MIPS variants there is a 32-bit mode flag; when this flag is

set, 64-bit instructions generate a trap.  Also, some 32-bit OSes only

save the 32-bit registers on a context switch, so it is essential never

to use the 64-bit registers.

@item -mgp64

@itemx -mfp64

Assume that 64-bit registers are available.  This is provided in the

interests of symmetry with @samp{-mgp32} and @samp{-mfp32}.

The @code{.set gp=64} and @code{.set fp=64} directives allow the size

of registers to be changed for parts of an object. The default value is

restored by @code{.set gp=default} and @code{.set fp=default}.

@item -mips16

@itemx -no-mips16

Generate code for the MIPS 16 processor.  This is equivalent to putting

@code{.set mips16} at the start of the assembly file.  @samp{-no-mips16}

turns off this option.

@item -msmartmips

@itemx -mno-smartmips

Enables the SmartMIPS extensions to the MIPS32 instruction set, which

provides a number of new instructions which target smartcard and

cryptographic applications.  This is equivalent to putting

@code{.set smartmips} at the start of the assembly file.

@samp{-mno-smartmips} turns off this option.

@item -mips3d

@itemx -no-mips3d

Generate code for the MIPS-3D Application Specific Extension.

This tells the assembler to accept MIPS-3D instructions.

@samp{-no-mips3d} turns off this option.

@item -mdmx

@itemx -no-mdmx

Generate code for the MDMX Application Specific Extension.

This tells the assembler to accept MDMX instructions.

@samp{-no-mdmx} turns off this option.

@item -mdsp

@itemx -mno-dsp

Generate code for the DSP Release 1 Application Specific Extension.

This tells the assembler to accept DSP Release 1 instructions.

@samp{-mno-dsp} turns off this option.

@item -mdspr2

@itemx -mno-dspr2

Generate code for the DSP Release 2 Application Specific Extension.

This option implies -mdsp.

This tells the assembler to accept DSP Release 2 instructions.

@samp{-mno-dspr2} turns off this option.

@item -mmt

@itemx -mno-mt

Generate code for the MT Application Specific Extension.

This tells the assembler to accept MT instructions.

@samp{-mno-mt} turns off this option.

@item -mfix7000

@itemx -mno-fix7000

Cause nops to be inserted if the read of the destination register

of an mfhi or mflo instruction occurs in the following two instructions.

@item -mfix-vr4120

@itemx -no-mfix-vr4120

Insert nops to work around certain VR4120 errata.  This option is

intended to be used on GCC-generated code: it is not designed to catch

all problems in hand-written assembler code.

@item -mfix-vr4130

@itemx -no-mfix-vr4130

Insert nops to work around the VR4130 @samp{mflo}/@samp{mfhi} errata.

@item -m4010

@itemx -no-m4010

Generate code for the LSI @sc{r4010} chip.  This tells the assembler to

accept the @sc{r4010} specific instructions (@samp{addciu}, @samp{ffc},

etc.), and to not schedule @samp{nop} instructions around accesses to

the @samp{HI} and @samp{LO} registers.  @samp{-no-m4010} turns off this

option.

@item -m4650

@itemx -no-m4650

Generate code for the MIPS @sc{r4650} chip.  This tells the assembler to accept

the @samp{mad} and @samp{madu} instruction, and to not schedule @samp{nop}

instructions around accesses to the @samp{HI} and @samp{LO} registers.

@samp{-no-m4650} turns off this option.

@itemx -m3900

@itemx -no-m3900

@itemx -m4100

@itemx -no-m4100

For each option @samp{-m@var{nnnn}}, generate code for the MIPS

@sc{r@var{nnnn}} chip.  This tells the assembler to accept instructions

specific to that chip, and to schedule for that chip's hazards.

@item -march=@var{cpu}

Generate code for a particular MIPS cpu.  It is exactly equivalent to

@samp{-m@var{cpu}}, except that there are more value of @var{cpu}

understood.  Valid @var{cpu} value are:

@quotation

2000,

3000,

3900,

4000,

4010,

4100,

4111,

vr4120,

vr4130,

vr4181,

4300,

4400,

4600,

4650,

5000,

rm5200,

rm5230,

rm5231,

rm5261,

rm5721,

vr5400,

vr5500,

6000,

rm7000,

8000,

rm9000,

10000,

12000,

4kc,

4km,

4kp,

4ksc,

4kec,

4kem,

4kep,

4ksd,

m4k,

m4kp,

24kc,

24kf2_1,

24kf,

24kf1_1,

24kec,

24kef2_1,

24kef,

24kef1_1,

34kc,

34kf2_1,

34kf,

34kf1_1,

74kc,

74kf2_1,

74kf,

74kf1_1,

74kf3_2,

5kc,

5kf,

20kc,

25kf,

sb1,

sb1a,

loongson2e,

loongson2f,

octeon

@end quotation

For compatibility reasons, @samp{@var{n}x} and @samp{@var{b}fx} are

accepted as synonyms for @samp{@var{n}f1_1}.  These values are

deprecated.

@item -mtune=@var{cpu}

Schedule and tune for a particular MIPS cpu.  Valid @var{cpu} values are

identical to @samp{-march=@var{cpu}}.

@item -mabi=@var{abi}

Record which ABI the source code uses.  The recognized arguments

are: @samp{32}, @samp{n32}, @samp{o64}, @samp{64} and @samp{eabi}.

@item -msym32

@itemx -mno-sym32

@cindex -msym32

@cindex -mno-sym32

Equivalent to adding @code{.set sym32} or @code{.set nosym32} to

the beginning of the assembler input.  @xref{MIPS symbol sizes}.

@cindex @code{-nocpp} ignored (MIPS)

@item -nocpp

This option is ignored.  It is accepted for command-line compatibility with

other assemblers, which use it to turn off C style preprocessing.  With

@sc{gnu} @code{@value{AS}}, there is no need for @samp{-nocpp}, because the

@sc{gnu} assembler itself never runs the C preprocessor.

@item -msoft-float

@itemx -mhard-float

Disable or enable floating-point instructions.  Note that by default

floating-point instructions are always allowed even with CPU targets

that don't have support for these instructions.

@item -msingle-float

@itemx -mdouble-float

Disable or enable double-precision floating-point operations.  Note

that by default double-precision floating-point operations are always

allowed even with CPU targets that don't have support for these

operations.

@item --construct-floats

@itemx --no-construct-floats

The @code{--no-construct-floats} option disables the construction of

double width floating point constants by loading the two halves of the

value into the two single width floating point registers that make up

the double width register.  This feature is useful if the processor

support the FR bit in its status  register, and this bit is known (by

the programmer) to be set.  This bit prevents the aliasing of the double

width register by the single width registers.

By default @code{--construct-floats} is selected, allowing construction

of these floating point constants.

@item --trap

@itemx --no-break

@c FIXME!  (1) reflect these options (next item too) in option summaries;

@c         (2) stop teasing, say _which_ instructions expanded _how_.

@code{@value{AS}} automatically macro expands certain division and

multiplication instructions to check for overflow and division by zero.  This

option causes @code{@value{AS}} to generate code to take a trap exception

rather than a break exception when an error is detected.  The trap instructions

are only supported at Instruction Set Architecture level 2 and higher.

@item --break

@itemx --no-trap

Generate code to take a break exception rather than a trap exception when an

error is detected.  This is the default.

@item -mpdr

@itemx -mno-pdr

Control generation of @code{.pdr} sections.  Off by default on IRIX, on

elsewhere.

@item -mshared

@itemx -mno-shared

When generating code using the Unix calling conventions (selected by

@samp{-KPIC} or @samp{-mcall_shared}), gas will normally generate code

which can go into a shared library.  The @samp{-mno-shared} option

tells gas to generate code which uses the calling convention, but can

not go into a shared library.  The resulting code is slightly more

efficient.  This option only affects the handling of the

@samp{.cpload} and @samp{.cpsetup} pseudo-ops.

@end table

@node MIPS Object

@section MIPS ECOFF object code

@cindex ECOFF sections

@cindex MIPS ECOFF sections

Assembling for a @sc{mips} @sc{ecoff} target supports some additional sections

besides the usual @code{.text}, @code{.data} and @code{.bss}.  The

additional sections are @code{.rdata}, used for read-only data,

@code{.sdata}, used for small data, and @code{.sbss}, used for small

common objects.

@cindex small objects, MIPS ECOFF

@cindex @code{gp} register, MIPS

When assembling for @sc{ecoff}, the assembler uses the @code{$gp} (@code{$28})

register to form the address of a ``small object''.  Any object in the

@code{.sdata} or @code{.sbss} sections is considered ``small'' in this sense.

For external objects, or for objects in the @code{.bss} section, you can use

the @code{@value{GCC}} @samp{-G} option to control the size of objects addressed via

@code{$gp}; the default value is 8, meaning that a reference to any object

eight bytes or smaller uses @code{$gp}.  Passing @samp{-G 0} to

@code{@value{AS}} prevents it from using the @code{$gp} register on the basis

of object size (but the assembler uses @code{$gp} for objects in @code{.sdata}

or @code{sbss} in any case).  The size of an object in the @code{.bss} section

is set by the @code{.comm} or @code{.lcomm} directive that defines it.  The

size of an external object may be set with the @code{.extern} directive.  For

example, @samp{.extern sym,4} declares that the object at @code{sym} is 4 bytes

in length, whie leaving @code{sym} otherwise undefined.

Using small @sc{ecoff} objects requires linker support, and assumes that the

@code{$gp} register is correctly initialized (normally done automatically by

the startup code).  @sc{mips} @sc{ecoff} assembly code must not modify the

@code{$gp} register.

@node MIPS Stabs

@section Directives for debugging information

@cindex MIPS debugging directives

@sc{mips} @sc{ecoff} @code{@value{AS}} supports several directives used for

generating debugging information which are not support by traditional @sc{mips}

assemblers.  These are @code{.def}, @code{.endef}, @code{.dim}, @code{.file},

@code{.scl}, @code{.size}, @code{.tag}, @code{.type}, @code{.val},

@code{.stabd}, @code{.stabn}, and @code{.stabs}.  The debugging information

generated by the three @code{.stab} directives can only be read by @sc{gdb},

not by traditional @sc{mips} debuggers (this enhancement is required to fully

support C++ debugging).  These directives are primarily used by compilers, not

assembly language programmers!

@node MIPS symbol sizes

@section Directives to override the size of symbols

@cindex @code{.set sym32}

@cindex @code{.set nosym32}

The n64 ABI allows symbols to have any 64-bit value.  Although this

provides a great deal of flexibility, it means that some macros have

much longer expansions than their 32-bit counterparts.  For example,

the non-PIC expansion of @samp{dla $4,sym} is usually:

@smallexample

lui     $4,%highest(sym)

lui     $1,%hi(sym)

daddiu  $4,$4,%higher(sym)

daddiu  $1,$1,%lo(sym)

dsll32  $4,$4,0

daddu   $4,$4,$1

@end smallexample

whereas the 32-bit expansion is simply:

@smallexample

lui     $4,%hi(sym)

daddiu  $4,$4,%lo(sym)

@end smallexample

n64 code is sometimes constructed in such a way that all symbolic

constants are known to have 32-bit values, and in such cases, it's

preferable to use the 32-bit expansion instead of the 64-bit

expansion.

You can use the @code{.set sym32} directive to tell the assembler

that, from this point on, all expressions of the form

@samp{@var{symbol}} or @samp{@var{symbol} + @var{offset}}

have 32-bit values.  For example:

@smallexample

.set sym32

dla     $4,sym

lw      $4,sym+16

sw      $4,sym+0x8000($4)

@end smallexample

will cause the assembler to treat @samp{sym}, @code{sym+16} and

@code{sym+0x8000} as 32-bit values.  The handling of non-symbolic

addresses is not affected.

The directive @code{.set nosym32} ends a @code{.set sym32} block and

reverts to the normal behavior.  It is also possible to change the

symbol size using the command-line options @option{-msym32} and

@option{-mno-sym32}.

These options and directives are always accepted, but at present,

they have no effect for anything other than n64.

@node MIPS ISA

@section Directives to override the ISA level

@cindex MIPS ISA override

@kindex @code{.set mips@var{n}}

@sc{gnu} @code{@value{AS}} supports an additional directive to change

the @sc{mips} Instruction Set Architecture level on the fly: @code{.set

mips@var{n}}.  @var{n} should be a number from 0 to 5, or 32, 32r2, 64

or 64r2.

The values other than 0 make the assembler accept instructions

for the corresponding @sc{isa} level, from that point on in the

assembly.  @code{.set mips@var{n}} affects not only which instructions

are permitted, but also how certain macros are expanded.  @code{.set

mips0} restores the @sc{isa} level to its original level: either the

level you selected with command line options, or the default for your

configuration.  You can use this feature to permit specific @sc{mips3}

instructions while assembling in 32 bit mode.  Use this directive with

care!

@cindex MIPS CPU override

@kindex @code{.set arch=@var{cpu}}

The @code{.set arch=@var{cpu}} directive provides even finer control.

It changes the effective CPU target and allows the assembler to use

instructions specific to a particular CPU.  All CPUs supported by the

@samp{-march} command line option are also selectable by this directive.

The original value is restored by @code{.set arch=default}.

The directive @code{.set mips16} puts the assembler into MIPS 16 mode,

in which it will assemble instructions for the MIPS 16 processor.  Use

@code{.set nomips16} to return to normal 32 bit mode.

Traditional @sc{mips} assemblers do not support this directive.

@node MIPS autoextend

@section Directives for extending MIPS 16 bit instructions

@kindex @code{.set autoextend}

@kindex @code{.set noautoextend}

By default, MIPS 16 instructions are automatically extended to 32 bits

when necessary.  The directive @code{.set noautoextend} will turn this

off.  When @code{.set noautoextend} is in effect, any 32 bit instruction

must be explicitly extended with the @code{.e} modifier (e.g.,

@code{li.e $4,1000}).  The directive @code{.set autoextend} may be used

to once again automatically extend instructions when necessary.

This directive is only meaningful when in MIPS 16 mode.  Traditional

@sc{mips} assemblers do not support this directive.

@node MIPS insn

@section Directive to mark data as an instruction

@kindex @code{.insn}

The @code{.insn} directive tells @code{@value{AS}} that the following

data is actually instructions.  This makes a difference in MIPS 16 mode:

when loading the address of a label which precedes instructions,

@code{@value{AS}} automatically adds 1 to the value, so that jumping to

the loaded address will do the right thing.

@node MIPS option stack

@section Directives to save and restore options

@cindex MIPS option stack

@kindex @code{.set push}

@kindex @code{.set pop}

The directives @code{.set push} and @code{.set pop} may be used to save

and restore the current settings for all the options which are

controlled by @code{.set}.  The @code{.set push} directive saves the

current settings on a stack.  The @code{.set pop} directive pops the

stack and restores the settings.

These directives can be useful inside an macro which must change an

option such as the ISA level or instruction reordering but does not want

to change the state of the code which invoked the macro.

Traditional @sc{mips} assemblers do not support these directives.

@node MIPS ASE instruction generation overrides

@section Directives to control generation of MIPS ASE instructions

@cindex MIPS MIPS-3D instruction generation override

@kindex @code{.set mips3d}

@kindex @code{.set nomips3d}

The directive @code{.set mips3d} makes the assembler accept instructions

from the MIPS-3D Application Specific Extension from that point on

in the assembly.  The @code{.set nomips3d} directive prevents MIPS-3D

instructions from being accepted.

@cindex SmartMIPS instruction generation override

@kindex @code{.set smartmips}

@kindex @code{.set nosmartmips}

The directive @code{.set smartmips} makes the assembler accept

instructions from the SmartMIPS Application Specific Extension to the

MIPS32 @sc{isa} from that point on in the assembly.  The

@code{.set nosmartmips} directive prevents SmartMIPS instructions from

being accepted.

@cindex MIPS MDMX instruction generation override

@kindex @code{.set mdmx}

@kindex @code{.set nomdmx}

The directive @code{.set mdmx} makes the assembler accept instructions

from the MDMX Application Specific Extension from that point on

in the assembly.  The @code{.set nomdmx} directive prevents MDMX

instructions from being accepted.

@cindex MIPS DSP Release 1 instruction generation override

@kindex @code{.set dsp}

@kindex @code{.set nodsp}

The directive @code{.set dsp} makes the assembler accept instructions

from the DSP Release 1 Application Specific Extension from that point

on in the assembly.  The @code{.set nodsp} directive prevents DSP

Release 1 instructions from being accepted.

@cindex MIPS DSP Release 2 instruction generation override

@kindex @code{.set dspr2}

@kindex @code{.set nodspr2}

The directive @code{.set dspr2} makes the assembler accept instructions

from the DSP Release 2 Application Specific Extension from that point

on in the assembly.  This dirctive implies @code{.set dsp}.  The

@code{.set nodspr2} directive prevents DSP Release 2 instructions from

being accepted.

@cindex MIPS MT instruction generation override

@kindex @code{.set mt}

@kindex @code{.set nomt}

The directive @code{.set mt} makes the assembler accept instructions

from the MT Application Specific Extension from that point on

in the assembly.  The @code{.set nomt} directive prevents MT

instructions from being accepted.

Traditional @sc{mips} assemblers do not support these directives.

@node MIPS floating-point

@section Directives to override floating-point options

@cindex Disable floating-point instructions

@kindex @code{.set softfloat}

@kindex @code{.set hardfloat}

The directives @code{.set softfloat} and @code{.set hardfloat} provide

finer control of disabling and enabling float-point instructions.

These directives always override the default (that hard-float

instructions are accepted) or the command-line options

(@samp{-msoft-float} and @samp{-mhard-float}).

@cindex Disable single-precision floating-point operations

@kindex @code{.set softfloat}

@kindex @code{.set hardfloat}

The directives @code{.set singlefloat} and @code{.set doublefloat}

provide finer control of disabling and enabling double-precision

float-point operations.  These directives always override the default

(that double-precision operations are accepted) or the command-line

options (@samp{-msingle-float} and @samp{-mdouble-float}).

Traditional @sc{mips} assemblers do not support these directives.