Subversion Repositories sgmii

 // -------------------------------------------------------------------------

// -------------------------------------------------------------------------

//

// Revision Control Information

//

// $RCSfile: altera_tse_timing_adapter8.v,v $

// $Source: /ipbu/cvs/sio/projects/TriSpeedEthernet/src/RTL/MAC/mac/timing_adapter/altera_tse_timing_adapter8.v,v $

//

// $Revision: #1 $

// $Date: 2011/11/10 $

// Check in by : $Author: max $

// Author      : SKNg

//

// Project     : Triple Speed Ethernet - 10/100/1000 MAC

//

// Description : Simulation Only

//

// AVALON STREAMING TIMING ADAPTER FOR 8BIT IMPLEMENTATION

// 

// ALTERA Confidential and Proprietary

// Copyright 2006 (c) Altera Corporation

// All rights reserved

//

// -------------------------------------------------------------------------

// -------------------------------------------------------------------------

module timing_adapter_8 (

  // Interface: clk                     

  input              clk,               //INPUT  : CLK

  input              reset,             //INPUT  : Asynchronous ACTIVE LOW Reset

  // Interface: in

  output reg         in_ready,          //OUTPUT : 'TIMING ADAPTER' READYNESS TO ACCEPT DATA FROM 'MAC'

  input              in_valid,          //INPUT  : 'MAC TO TIMING ADAPTER' DATA VALID

  input      [7: 0]  in_data,           //INPUT  : 'MAC TO TIMING ADAPTER' DATA

  input              in_startofpacket,  //INPUT  : 'MAC TO TIMING ADAPTER' START OF PACKET

  input              in_endofpacket,    //INPUT  : 'MAC TO TIMING ADAPTER' END OF PACKET

  input              in_error,          //INPUT  : 'MAC TO TIMING ADAPTER' PACKET DATA ERROR

  // Interface: out

  input              out_ready,         //INPUT  : 'APPLICATION' READYNESS TO ACCEPT DATA FROM 'TIMING ADAPTER'

  output reg         out_valid,         //OUTPUT : 'TIMING ADAPTER TO APPLICATION' DATA VALID

  output reg [7: 0]  out_data,          //OUTPUT : 'TIMING ADAPTER TO APPLICATION' DATA

  output reg         out_startofpacket, //OUTPUT : 'TIMING ADAPTER TO APPLICATION' START OF PACKET

  output reg         out_endofpacket,   //OUTPUT : 'TIMING ADAPTER TO APPLICATION' END OF PACKET

  output reg         out_error          //OUTPUT : 'TIMING ADAPTER TO APPLICATION' PACKET DATA ERROR

);

   // ---------------------------------------------------------------------

   //| Signal Declarations

   // ---------------------------------------------------------------------

   reg  [10: 0] in_payload;

   wire [10: 0] out_payload;

   wire         in_ready_wire;

   wire         out_valid_wire;

   wire [ 6: 0] fifo_fill;

   reg          ready;

   // ---------------------------------------------------------------------

   //| Payload Mapping

   // ---------------------------------------------------------------------

   always @ (in_data or in_startofpacket or in_endofpacket or in_error or out_payload)

   begin

     in_payload = {in_data,in_startofpacket,in_endofpacket,in_error};

     {out_data,out_startofpacket,out_endofpacket,out_error} = out_payload;

   end

   // ---------------------------------------------------------------------

   //| FIFO

   // ---------------------------------------------------------------------

   timing_adapter_fifo_8 u_timing_adapter_fifo

     (

       .clk        (clk),               //INPUT  : CLK

       .reset      (reset),             //INPUT  : Asynchronous ACTIVE LOW Reset

       .in_ready   (),                  //OUTPUT : 'TIMING ADAPTER' READYNESS TO ACCEPT DATA FROM 'MAC'

       .in_valid   (in_valid),          //INPUT  : 'MAC TO TIMING ADAPTER' DATA VALID

       .in_data    (in_payload),        //INPUT  : 'MAC TO TIMING ADAPTER' DATA

       .out_ready  (ready),             //INPUT  : 'APPLICATION' READYNESS TO ACCEPT DATA FROM 'TIMING ADAPTER'

       .out_valid  (out_valid_wire),    //OUTPUT : 'TIMING ADAPTER TO APPLICATION' DATA VALID  

       .out_data   (out_payload),       //OUTPUT : 'TIMING ADAPTER TO APPLICATION' DATA

       .fill_level (fifo_fill)          //OUTPUT : 'TIMING ADAPTER' FIFO FILL LEVEL

       );

   // ---------------------------------------------------------------------

   //| Ready & valid signals.

   // ---------------------------------------------------------------------

   always @ (fifo_fill or out_valid_wire or out_ready)

    begin

      in_ready <= (fifo_fill < 40);

      out_valid <= out_valid_wire;

      ready = out_ready;

   end

endmodule