URL https://opencores.org/ocsvn/socgen/socgen/trunk

Subversion Repositories socgen

[/] [socgen/] [trunk/] [tools/] [documentation/] [ver2gedasym] - Blame information for rev 135

Details | Compare with Previous | View Log


eval 'exec `which perl` -S $0 ${1+"$@"}'
   if 0;
#/****************************************************************************/
#/*                                                                          */
#/*   SOCGEN Design for Reuse toolset                                        */
#/*                                                                          */
#/*   Version 1.0.0                                                          */
#/*                                                                          */
#/*   Author(s):                                                             */
#/*      - John Eaton, z3qmtr45@gmail.com                                    */
#/*                                                                          */
#/****************************************************************************/
#/*                                                                          */
#/*                                                                          */
#/*             Copyright 2016 John T Eaton                                  */
#/*                                                                          */
#/* Licensed under the Apache License, Version 2.0 (the "License");          */
#/* you may not use this file except in compliance with the License.         */
#/* You may obtain a copy of the License at                                  */
#/*                                                                          */
#/*    http://www.apache.org/licenses/LICENSE-2.0                            */
#/*                                                                          */
#/* Unless required by applicable law or agreed to in writing, software      */
#/* distributed under the License is distributed on an "AS IS" BASIS,        */
#/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
#/* See the License for the specific language governing permissions and      */
#/* limitations under the License.                                           */
#/*                                                                          */
#/*                                                                          */
#/****************************************************************************/
 
#  ToDo:
#  parse reg from output bus name
#  parse bus and change pin type to bus
 
use Verilog::Netlist;
 
# Setup options so files can be found
use Verilog::Getopt;
my $opt = new Verilog::Getopt;
$opt->parameter( "+incdir+verilog",
                    "-y","verilog",
               );
 
 
 
 
 
 
 
 
my @files            = ();
 
$SRCFILE            = @ARGV[0];
$outfile            = @ARGV[1];
 
 
 
 
             push @files,  "$SRCFILE";
 
 
 
 
# Prepare netlist
my $nl = new Verilog::Netlist (options => $opt,);
 
foreach $file (@files) {
                        print "Parsing   $file\n";
                        $nl->read_file (filename=>$file);
}
 
 
 
 
 
 
 
# Read in any sub-modules
$nl->link();
$nl->exit_if_error();
 
 
foreach my $mod ($nl->top_modules_sorted) {make_sch ($mod);}
 
 
 
sub make_sch {
        my $mod = shift;
        my $mod_name  = $mod->name;
 
        my $in_count   = 0;
        my $out_count  = 0;
        my $in_length  = 0;
        my $out_length = 0;
 
        my $color =  5;
        my $size  = 10;
 
 
        open(FILE,">${outfile}/${mod_name}.sym") or die "No sym directory";
 
        foreach my $sig ($mod->ports_sorted) {
 
            my $dir       =  $sig->direction;
            my $data_type =  $sig->data_type;
            my $sig_name  =  $sig->name;
            $data_type  =~ s/reg //;
            $data_type  =~ s/reg//;
 
 
            if($data_type)
              {
              $pin_name = "$sig_name"."$data_type";
              if("in" eq  $dir)
                {
                push(@invads,$pin_name);
                $in_count = $in_count+1;
                if( length($pin_name) > $in_length) { $in_length =  length($pin_name)};
                }
              if("out" eq  $dir)
                {
                push(@outvads,$pin_name);
                $out_count = $out_count+1;
                if( length($pin_name) > $out_length){  $out_length =  length($pin_name)            }
                }
 
              if("inout" eq  $dir)
                {
                push(@inoutvads,$pin_name);
                $out_count = $out_count+1;
                if( length($pin_name) > $out_length){  $out_length =  length($pin_name)            }
                }
 
 
 
              }
            else
              {
              $pin_name = $sig_name;
              if("in" eq  $dir)
                {
                push(@inpads,$pin_name);
                $in_count = $in_count+1;
                if( length($pin_name) > $in_length){  $in_length =  length($pin_name)            }
                }
              if("out" eq  $dir)
                {
                push(@outpads,$pin_name);
                $out_count = $out_count+1;
                if( length($pin_name) > $out_length){  $out_length =  length($pin_name)            }
                }
 
              if("inout" eq  $dir)
                {
                push(@inoutpads,$pin_name);
                $out_count = $out_count+1;
                if( length($pin_name) > $out_length){  $out_length =  length($pin_name)            }
                }
 
              };
 
 
        }
 
        my $max_pins;
 
        if($in_count > $out_count) {$max_pins = $in_count ;} else  {$max_pins = $out_count ;}
 
        my $box_h   = ($max_pins * 200) +300;
        my $box_w   = ($in_length +$out_length)*10*$size +400;
        my $out_title = ($in_length +$out_length)*10*$size +600;
        my $out_edg = ($in_length +$out_length)*10*$size +700;
        my $out_pad = ($in_length +$out_length)*10*$size +1000;
        my $title   = $box_h +150;
        my $ref_des = $box_h +350;
 
        printf FILE ("v 20100214 1\n");
        printf FILE ("B 300 0  $box_w $box_h 3 60 0 0 -1 -1 0 -1 -1 -1 -1 -1\n");
        printf FILE ("T 400 $title 5 10 1 1 0 0 1 1\ndevice=%s\n", $mod->name);
        printf FILE ("T 400 $ref_des 8 10 1 1 0 0 1 1\n%srefdes=U?\n");
 
        printf  ("%s\n", $mod->name);
 
 
         my $pin_y = 200;
         my $pin_seq = 1;
 
         while( $name =pop(@invads))
          {
          printf FILE ("P 300 $pin_y 0 $pin_y 10 1 1 \n");
          printf FILE ("{\nT 400 $pin_y $color $size 1 1 0 1 1 1\npinnumber=%s\n",$name);
          printf FILE ("T 400 $pin_y $color $size 0 1 0 1 1 1\npinseq=%s\n}\n",$pin_seq);
          $pin_seq = $pin_seq +1;
          $pin_y = $pin_y +200;
          }
 
 
         while( $name =pop(@inpads))
          {
           printf FILE ("P 300 $pin_y 0 $pin_y 4 0 1  \n");
           printf FILE ("{\nT 400 $pin_y $color $size 1 1 0 1 1 1 \npinnumber=%s\n",$name);
           printf FILE ("T 400 $pin_y $color $size 0 1 0 1 1 1 \npinseq=%s\n}\n",$pin_seq);
           $pin_seq = $pin_seq +1;
           $pin_y = $pin_y +200;
          }
 
 
 
         $pin_y = 200;
 
         while( $name =pop(@outvads))
          {
           printf FILE ("P $out_edg $pin_y $out_pad $pin_y 10 1 1\n");
           printf FILE ("{\nT $out_title $pin_y $color  $size 1 1 0 7 1 1 \npinnumber=%s\n",$name);
           printf FILE ("T $out_title $pin_y $color  $size 0 1 0 7 1 1 \npinseq=%s\n}\n",$pin_seq);
           $pin_seq = $pin_seq +1;
           $pin_y = $pin_y +200;
          }
 
 
         while( $name =pop(@outpads))
          {
           printf FILE ("P $out_edg $pin_y $out_pad $pin_y 4 0 1\n");
           printf FILE ("{\nT $out_title $pin_y $color  $size 1 1 0 7 1 1\npinnumber=%s\n",$name);
           printf FILE ("T $out_edg $pin_y $color  $size 0 1 0 7 1 1\npinseq=%s\n}\n",$pin_seq);
           $pin_seq = $pin_seq +1;
           $pin_y = $pin_y +200;
          }
 
 
 
 
         while( $name =pop(@inoutvads))
          {
           printf FILE ("P $out_edg $pin_y $out_pad $pin_y 10 1 1\n");
           printf FILE ("{\nT $out_title $pin_y $color  $size 1 1 0 7 1 1 \npinnumber=%s\n",$name);
           printf FILE ("T $out_title $pin_y $color  $size 0 1 0 7 1 1 \npinseq=%s\n}\n",$pin_seq);
           $pin_seq = $pin_seq +1;
           $pin_y = $pin_y +200;
          }
 
 
         while( $name =pop(@inoutpads))
          {
           printf FILE ("P $out_edg $pin_y $out_pad $pin_y 4 0 1\n");
           printf FILE ("{\nT $out_title $pin_y $color  $size 1 1 0 7 1 1\npinnumber=%s\n",$name);
           printf FILE ("T $out_edg $pin_y $color  $size 0 1 0 7 1 1\npinseq=%s\n}\n",$pin_seq);
           $pin_seq = $pin_seq +1;
           $pin_y = $pin_y +200;
          }
 
 
 
 
 
 
 
 
        foreach my $cell ($mod->cells_sorted) {
            close(FILE);
            make_sch ($cell->submod, $cell->name) if $cell->submod;
        }
    }
 
 
 
 
 
 
 
1;
 
 
 
 
 
 
 

Browse

Tools

Subversion Repositories socgen

[/] [socgen/] [trunk/] [tools/] [documentation/] [ver2gedasym] - Blame information for rev 135

Line No.	Rev	Author	Line
1	128	jt_eaton	eval 'exec `which perl` -S $0 ${1+"$@"}'
2			`if 0;`
3	135	jt_eaton	`#/****************************************************************************/`
4			`#/* */`
5			`#/* SOCGEN Design for Reuse toolset */`
6			`#/* */`
7			`#/* Version 1.0.0 */`
8			`#/* */`
9			`#/* Author(s): */`
10			`#/* - John Eaton, z3qmtr45@gmail.com */`
11			`#/* */`
12			`#/****************************************************************************/`
13			`#/* */`
14			`#/* */`
15			`#/* Copyright 2016 John T Eaton */`
16			`#/* */`
17			`#/* Licensed under the Apache License, Version 2.0 (the "License"); */`
18			`#/* you may not use this file except in compliance with the License. */`
19			`#/* You may obtain a copy of the License at */`
20			`#/* */`
21			`#/* http://www.apache.org/licenses/LICENSE-2.0 */`
22			`#/* */`
23			`#/* Unless required by applicable law or agreed to in writing, software */`
24			`#/* distributed under the License is distributed on an "AS IS" BASIS, */`
25			`#/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */`
26			`#/* See the License for the specific language governing permissions and */`
27			`#/* limitations under the License. */`
28			`#/* */`
29			`#/* */`
30			`#/****************************************************************************/`
31	128	jt_eaton
32			`# ToDo:`
33			`# parse reg from output bus name`
34			`# parse bus and change pin type to bus`
35
36			`use Verilog::Netlist;`
37
38			`# Setup options so files can be found`
39			`use Verilog::Getopt;`
40			`my $opt = new Verilog::Getopt;`
41			`$opt->parameter( "+incdir+verilog",`
42			`"-y","verilog",`
43			`);`
44
45
46
47
48
49
50
51
52			`my @files = ();`
53
54			`$SRCFILE = @ARGV[0];`
55			`$outfile = @ARGV[1];`
56
57
58
59
60			`push @files, "$SRCFILE";`
61
62
63
64
65			`# Prepare netlist`
66			`my $nl = new Verilog::Netlist (options => $opt,);`
67
68			`foreach $file (@files) {`
69			`print "Parsing $file\n";`
70			`$nl->read_file (filename=>$file);`
71			`}`
72
73
74
75
76
77
78
79			`# Read in any sub-modules`
80			`$nl->link();`
81			`$nl->exit_if_error();`
82
83
84			`foreach my $mod ($nl->top_modules_sorted) {make_sch ($mod);}`
85
86
87
88			`sub make_sch {`
89			`my $mod = shift;`
90			`my $mod_name = $mod->name;`
91
92			`my $in_count = 0;`
93			`my $out_count = 0;`
94			`my $in_length = 0;`
95			`my $out_length = 0;`
96
97			`my $color = 5;`
98			`my $size = 10;`
99
100
101			`open(FILE,">${outfile}/${mod_name}.sym") or die "No sym directory";`
102
103			`foreach my $sig ($mod->ports_sorted) {`
104
105			`my $dir = $sig->direction;`
106			`my $data_type = $sig->data_type;`
107			`my $sig_name = $sig->name;`
108			`$data_type =~ s/reg //;`
109			`$data_type =~ s/reg//;`
110
111
112			`if($data_type)`
113			`{`
114			`$pin_name = "$sig_name"."$data_type";`
115			`if("in" eq $dir)`
116			`{`
117			`push(@invads,$pin_name);`
118			`$in_count = $in_count+1;`
119			`if( length($pin_name) > $in_length) { $in_length = length($pin_name)};`
120			`}`
121			`if("out" eq $dir)`
122			`{`
123			`push(@outvads,$pin_name);`
124			`$out_count = $out_count+1;`
125			`if( length($pin_name) > $out_length){ $out_length = length($pin_name) }`
126			`}`
127
128			`if("inout" eq $dir)`
129			`{`
130			`push(@inoutvads,$pin_name);`
131			`$out_count = $out_count+1;`
132			`if( length($pin_name) > $out_length){ $out_length = length($pin_name) }`
133			`}`
134
135
136
137			`}`
138			`else`
139			`{`
140			`$pin_name = $sig_name;`
141			`if("in" eq $dir)`
142			`{`
143			`push(@inpads,$pin_name);`
144			`$in_count = $in_count+1;`
145			`if( length($pin_name) > $in_length){ $in_length = length($pin_name) }`
146			`}`
147			`if("out" eq $dir)`
148			`{`
149			`push(@outpads,$pin_name);`
150			`$out_count = $out_count+1;`
151			`if( length($pin_name) > $out_length){ $out_length = length($pin_name) }`
152			`}`
153
154			`if("inout" eq $dir)`
155			`{`
156			`push(@inoutpads,$pin_name);`
157			`$out_count = $out_count+1;`
158			`if( length($pin_name) > $out_length){ $out_length = length($pin_name) }`
159			`}`
160
161			`};`
162
163
164			`}`
165
166			`my $max_pins;`
167
168			`if($in_count > $out_count) {$max_pins = $in_count ;} else {$max_pins = $out_count ;}`
169
170			`my $box_h = ($max_pins * 200) +300;`
171			`my $box_w = ($in_length +$out_length)10$size +400;`
172			`my $out_title = ($in_length +$out_length)10$size +600;`
173			`my $out_edg = ($in_length +$out_length)10$size +700;`
174			`my $out_pad = ($in_length +$out_length)10$size +1000;`
175			`my $title = $box_h +150;`
176			`my $ref_des = $box_h +350;`
177
178			`printf FILE ("v 20100214 1\n");`
179			`printf FILE ("B 300 0 $box_w $box_h 3 60 0 0 -1 -1 0 -1 -1 -1 -1 -1\n");`
180			`printf FILE ("T 400 $title 5 10 1 1 0 0 1 1\ndevice=%s\n", $mod->name);`
181			`printf FILE ("T 400 $ref_des 8 10 1 1 0 0 1 1\n%srefdes=U?\n");`
182
183			`printf ("%s\n", $mod->name);`
184
185
186			`my $pin_y = 200;`
187			`my $pin_seq = 1;`
188
189			`while( $name =pop(@invads))`
190			`{`
191			`printf FILE ("P 300 $pin_y 0 $pin_y 10 1 1 \n");`
192			`printf FILE ("{\nT 400 $pin_y $color $size 1 1 0 1 1 1\npinnumber=%s\n",$name);`
193			`printf FILE ("T 400 $pin_y $color $size 0 1 0 1 1 1\npinseq=%s\n}\n",$pin_seq);`
194			`$pin_seq = $pin_seq +1;`
195			`$pin_y = $pin_y +200;`
196			`}`
197
198
199			`while( $name =pop(@inpads))`
200			`{`
201			`printf FILE ("P 300 $pin_y 0 $pin_y 4 0 1 \n");`
202			`printf FILE ("{\nT 400 $pin_y $color $size 1 1 0 1 1 1 \npinnumber=%s\n",$name);`
203			`printf FILE ("T 400 $pin_y $color $size 0 1 0 1 1 1 \npinseq=%s\n}\n",$pin_seq);`
204			`$pin_seq = $pin_seq +1;`
205			`$pin_y = $pin_y +200;`
206			`}`
207
208
209
210			`$pin_y = 200;`
211
212			`while( $name =pop(@outvads))`
213			`{`
214			`printf FILE ("P $out_edg $pin_y $out_pad $pin_y 10 1 1\n");`
215			`printf FILE ("{\nT $out_title $pin_y $color $size 1 1 0 7 1 1 \npinnumber=%s\n",$name);`
216			`printf FILE ("T $out_title $pin_y $color $size 0 1 0 7 1 1 \npinseq=%s\n}\n",$pin_seq);`
217			`$pin_seq = $pin_seq +1;`
218			`$pin_y = $pin_y +200;`
219			`}`
220
221
222			`while( $name =pop(@outpads))`
223			`{`
224			`printf FILE ("P $out_edg $pin_y $out_pad $pin_y 4 0 1\n");`
225			`printf FILE ("{\nT $out_title $pin_y $color $size 1 1 0 7 1 1\npinnumber=%s\n",$name);`
226			`printf FILE ("T $out_edg $pin_y $color $size 0 1 0 7 1 1\npinseq=%s\n}\n",$pin_seq);`
227			`$pin_seq = $pin_seq +1;`
228			`$pin_y = $pin_y +200;`
229			`}`
230
231
232
233
234			`while( $name =pop(@inoutvads))`
235			`{`
236			`printf FILE ("P $out_edg $pin_y $out_pad $pin_y 10 1 1\n");`
237			`printf FILE ("{\nT $out_title $pin_y $color $size 1 1 0 7 1 1 \npinnumber=%s\n",$name);`
238			`printf FILE ("T $out_title $pin_y $color $size 0 1 0 7 1 1 \npinseq=%s\n}\n",$pin_seq);`
239			`$pin_seq = $pin_seq +1;`
240			`$pin_y = $pin_y +200;`
241			`}`
242
243
244			`while( $name =pop(@inoutpads))`
245			`{`
246			`printf FILE ("P $out_edg $pin_y $out_pad $pin_y 4 0 1\n");`
247			`printf FILE ("{\nT $out_title $pin_y $color $size 1 1 0 7 1 1\npinnumber=%s\n",$name);`
248			`printf FILE ("T $out_edg $pin_y $color $size 0 1 0 7 1 1\npinseq=%s\n}\n",$pin_seq);`
249			`$pin_seq = $pin_seq +1;`
250			`$pin_y = $pin_y +200;`
251			`}`
252
253
254
255
256
257
258
259
260			`foreach my $cell ($mod->cells_sorted) {`
261			`close(FILE);`
262			`make_sch ($cell->submod, $cell->name) if $cell->submod;`
263			`}`
264			`}`
265
266
267
268
269
270
271
272			`1;`
273
274
275
276
277
278
279