URL https://opencores.org/ocsvn/socgen/socgen/trunk

Subversion Repositories socgen

[/] [socgen/] [trunk/] [tools/] [simulation/] [build_icarus_filelists] - Blame information for rev 135

Details | Compare with Previous | View Log


eval 'exec `which perl` -S $0 ${1+"$@"}'
   if 0;
#/****************************************************************************/
#/*                                                                          */
#/*   SOCGEN Design for Reuse toolset                                        */
#/*                                                                          */
#/*   Version 1.0.0                                                          */
#/*                                                                          */
#/*   Author(s):                                                             */
#/*      - John Eaton, z3qmtr45@gmail.com                                    */
#/*                                                                          */
#/****************************************************************************/
#/*                                                                          */
#/*                                                                          */
#/*             Copyright 2016 John T Eaton                                  */
#/*                                                                          */
#/* Licensed under the Apache License, Version 2.0 (the "License");          */
#/* you may not use this file except in compliance with the License.         */
#/* You may obtain a copy of the License at                                  */
#/*                                                                          */
#/*    http://www.apache.org/licenses/LICENSE-2.0                            */
#/*                                                                          */
#/* Unless required by applicable law or agreed to in writing, software      */
#/* distributed under the License is distributed on an "AS IS" BASIS,        */
#/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */
#/* See the License for the specific language governing permissions and      */
#/* limitations under the License.                                           */
#/*                                                                          */
#/*                                                                          */
#/****************************************************************************/
 
 
############################################################################
# General PERL config
############################################################################
use Getopt::Long;
use English;
use File::Basename;
use Cwd;
use XML::LibXML;
use lib './tools';
use sys::lib;
use yp::lib;
use BerkeleyDB;
 
 
$OUTPUT_AUTOFLUSH = 1; # set autoflush of stdout to TRUE.
 
 
############################################################################
### Process the options
############################################################################
Getopt::Long::config("require_order", "prefix=-");
GetOptions("h","help",
           "work_site=s" => \$work_site,
           "vendor=s" => \$vendor,
           "library=s" => \$library,
           "component=s" => \$component,
           "version=s" => \$version
) || die "(use '$program_name -h' for help)";
 
 
 
##############################################################################
## Help option
##############################################################################
if ( $opt_h  or $opt_help)
  { print "\n build_icarus_filelists -work_site /work  -vendor vendor_name  -library library_name  -component component_name   ";
    print "\n";
    exit 1;
  }
 
 
##############################################################################
##
##############################################################################
 
 
 
$home = cwd();
 
my $variant = "";
if($version) {$variant = "${component}_${version}"}
else         {$variant = "${component}"}
 
#############################################################################
##
##
#############################################################################
 
my $parser = XML::LibXML->new();
 
 
 
#/*********************************************************************************************/
#/                                                                                            */
#/  Create filelists for simulation, code coverage                                            */
#/                                                                                            */
#/                                                                                            */
#/*********************************************************************************************/
 
@filelist_sim = (  );
 
 
 
 
 
 
 
 
#############################################################################
##
##
#############################################################################
 
print "Building SIM filelists for  $work_site  $vendor $library   $component $version $variant \n" ;
my $sim_library_path ;
my $spirit_component_file    = $parser->parse_file(yp::lib::find_ipxact_component($vendor,$library,$component,$version));
my $socgen_file               = $parser->parse_file(yp::lib::find_componentConfiguration($vendor,$library,$component));
my $lib_comp_sep             = yp::lib::find_lib_comp_sep($vendor,$library,$component);
 
my $sim_comp_path            = $socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:comp_path/text()")->to_literal;
 
if ($sim_comp_path)
{
$sim_library_path            ="${lib_comp_sep}${sim_comp_path}";
}
else
{
$sim_library_path            = $socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:library_path/text()")->to_literal;
}
 
 
#/*********************************************************************************************/
#/                                                                                            */
#/                                                                                            */
#/  Read each variants parameters and defaults into an array and their order into an array    */
#/  order must be preservered so that parameters can use the values of other parameters       */
#/                                                                                            */
#/*********************************************************************************************/
 
my %default_parameters = ();
my @parameter_order    = ();
 
 
foreach  my   $i_name ($socgen_file->findnodes("//socgen:configurations/socgen:configuration[socgen:name/text() = '$variant']/socgen:parameters/socgen:parameter"))
      {
      my($parameter_name)     = $i_name ->findnodes('socgen:name/text()')->to_literal ;
      my($parameter_default)  = $i_name ->findnodes('socgen:value/text()')->to_literal ;
      $default_parameters{$parameter_name}  = $parameter_default;
      push  @parameter_order ,$parameter_name ;
      }
 
 
 
 
 
 
 
 
 
foreach my $comp ($spirit_component_file->findnodes('//ipxact:component'))
   {
   my($vendor)   = $comp->findnodes('./ipxact:vendor/text()')->to_literal ;
   my($library)  = $comp->findnodes('./ipxact:library/text()')->to_literal ;
   my($name)     = $comp->findnodes('./ipxact:name/text()')->to_literal ;
   my($version)  = $comp->findnodes('./ipxact:version/text()')->to_literal ;
   my $variant = "";
   if($version) {$variant = "${name}_${version}"}
   else         {$variant = "${name}"}
   print "rtl/gen directories  for    $library - $component         VLNV        $vendor - $library -  $name -  $variant \n";
   $module_name = yp::lib::get_module_name($vendor,$library,$name,$version);
   }
 
 
   print "CREATING componentRef filelists for   $library   $component  $name $variant \n";
 
 
   #/*********************************************************************************************/
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/*********************************************************************************************/
 
 
foreach  my   $i_name ($socgen_file->findnodes("//socgen:testbench[socgen:variant/text() = '$variant']/socgen:code_coverage"))
   {
 
   my $path ="${home}${work_site}/${vendor}__${library}${sim_library_path}/cov";
   mkdir $path,0755          unless( -e $path );
   $path ="${home}${work_site}/${vendor}__${library}${sim_library_path}/cov/${variant}";
   mkdir $path,0755          unless( -e $path );
 
 
   my $outfile ="${home}${work_site}/${vendor}__${library}${sim_library_path}/cov/${variant}/TestBench";
   open  DUTFILE,">$outfile" or die "unable to open $outfile";
   print  DUTFILE  "`timescale    1ns/1ns   \n";
   print  DUTFILE  " module TB();   \n";
 
 
 
 
      print DUTFILE  "     $module_name   \n";
      my $first =1;
      foreach  my  $parameter_name  (@parameter_order)
         {
         my($parameter_default)  =    $default_parameters{$parameter_name};
         if($first)
           {
           print DUTFILE  "   #(  .${parameter_name}(${parameter_default})";
           $first = 0;
           }
         else
           {
           print DUTFILE  ",\n       .${parameter_name}(${parameter_default})";
           }
         }
         if($first)
           {
           print DUTFILE  "\n  test \n (); \n\n\n\n";
           }
          else
           {
           print DUTFILE  ") \n test \n (); \n\n\n\n";
           }
 
 
   print  DUTFILE  " endmodule   \n";
 
 
 
 
 
 
 
 
 
 
 
 
   }
 
 
 
   #/*********************************************************************************************/
   #/                                                                                            */
   #/ Make simulation file set                                                                   */
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/*********************************************************************************************/
 
   print "CREATING sim files for   $library  $component   $chip   $name  $variant \n";
 
 
 
 
 
 
    foreach  my   $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:icarus/socgen:test[socgen:variant/text() = '$variant']"))
      {
      my($simulation)      = $i_name ->findnodes('socgen:name/text()')->to_literal ;
      my($configuration)   = $i_name ->findnodes('socgen:configuration/text()')->to_literal ;
      print " sim files for   $library  $component   $variant  $simulation $configuration          \n";
 
 
 
 
 
     my $design_db_filename = yp::lib::get_design_db_file;
     my $design_db   = new BerkeleyDB::Hash( -Filename => $design_db_filename, -Flags => DB_CREATE ) or die "Cannot open ${design_db_filename}: $!";
 
 
 
     my $data_db_filename = yp::lib::get_elab_db_filename($vendor,$library,$component,$version,$simulation);
     my $data_db   = new BerkeleyDB::Hash( -Filename => $data_db_filename, -Flags => DB_CREATE ) or die "Cannot open ${data_db_filename}: $!";
 
 
     my $key;
     my $value;
 
 
     my @configs = ();
 
 
     my $cursor = $data_db ->db_cursor() ;
     while ($cursor->c_get($key, $value, DB_NEXT) == 0)
       {
 
 
       $_ = $key;
       if(/parameter_root__(\S+)/)
         {
#         print "$key $value  \n";
         push @configs,"${1}--${value}:::";
         }
 
       }
 
       my $status = $cursor->c_close() ;
 
       $data_db   -> db_close();
 
       @configs      = sys::lib::trim_sort(@configs);
 
       my $config_n;
 
       foreach my $config (@configs)
              {
              $config_n = "${config}${config_n}";
              }
 
      my $new_value;
      $config_n="CONFIG___${config_n}";
      $design_db->db_get($config_n, $new_value );
      $config_n=$new_value;
 
 
 
      my $outfile ="${home}${work_site}/${vendor}__${library}${sim_library_path}/icarus/${simulation}/TestBench";
      open SIM_PARM_FILE,">$outfile" or die "unable to open $outfile";
 
 
      my %local_parameters =  %default_parameters;
      my @local_order      =  @parameter_order;
 
 
 
      foreach  my   $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:testbenches/socgen:testbench[socgen:variant/text() = '$variant']/./socgen:parameters/socgen:parameter/socgen:name"))
         {
         my($par_name)   = $i_name ->findnodes('./text()')->to_literal ;
         my($par_value)  = $i_name ->findnodes('../socgen:value/text()')->to_literal ;
         if  ( $local_parameters{$par_name} eq '' )  { push @local_order , $par_name; }
         $local_parameters{$par_name} = $par_value;
         }
 
 
 
      foreach  my   $i_name ($socgen_file->findnodes("//socgen:configurations/socgen:configuration[socgen:name/text() = '$configuration']/./socgen:parameters/socgen:parameter/socgen:name"))
         {
         my($par_name)   = $i_name ->findnodes('./text()')->to_literal ;
         my($par_value)  = $i_name ->findnodes('../socgen:value/text()')->to_literal ;
         if($local_parameters{$par_name} eq '' )  { push @local_order , $par_name; }
         $local_parameters{$par_name} = $par_value;
         }
 
 
 
      foreach  my   $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:icarus/socgen:test[socgen:name/text() = '$simulation']/./socgen:parameters/socgen:parameter/socgen:name"))
         {
         my($par_name)   = $i_name ->findnodes('./text()')->to_literal ;
         my($par_value)  = $i_name ->findnodes('../socgen:value/text()')->to_literal ;
         if  ( $local_parameters{$par_name} eq '' )  { push @local_order , $par_name; }
         $local_parameters{$par_name} = $par_value;
         }
 
 
 
 
 
 
 
 
 
      print SIM_PARM_FILE  "//  Testbench  for  $library    $component    $variant   $configuration    $simulation\n";
      print SIM_PARM_FILE  "`ifndef     TIMESCALE                                \n";
      print SIM_PARM_FILE  "`define     TIMESCALE   1ns/1ns                                \n";
      print SIM_PARM_FILE  "`endif                                \n";
      print SIM_PARM_FILE  "                                \n";
      print SIM_PARM_FILE  "`ifndef     TIMEFORMAT                                \n";
      print SIM_PARM_FILE  "`define     TIMEFORMAT  \$timeformat(-6, 2, \" us\", 14);                                \n";
      print SIM_PARM_FILE  "`endif                                \n";
      print SIM_PARM_FILE  "                                \n";
      print SIM_PARM_FILE  "`timescale `TIMESCALE                                \n";
      print SIM_PARM_FILE  "                                \n";
      print SIM_PARM_FILE  "module TB();                                \n";
      print SIM_PARM_FILE  "                                \n";
      print SIM_PARM_FILE  "initial                                \n";
      print SIM_PARM_FILE  "begin                                \n";
      print SIM_PARM_FILE  "`TIMEFORMAT                                \n";
      print SIM_PARM_FILE  "end                                \n";
      print SIM_PARM_FILE  "                                \n";
      print SIM_PARM_FILE  "`ifdef VCD                                \n";
      print SIM_PARM_FILE  "initial                                \n";
      print SIM_PARM_FILE  " begin                                \n";
      print SIM_PARM_FILE  "`include \"./dmp_define\"                                \n";
      print SIM_PARM_FILE  " end                                \n";
      print SIM_PARM_FILE  "`endif                                \n";
      print SIM_PARM_FILE  " reg clk,START;            \n";
      print SIM_PARM_FILE  " wire FAIL,FINISH;                               \n";
      print SIM_PARM_FILE  " reg  failed;                               \n";
      print SIM_PARM_FILE  " reg [31:0] failcount;                               \n";
      print SIM_PARM_FILE  "initial                             \n";
      print SIM_PARM_FILE  "begin                             \n";
      print SIM_PARM_FILE  "clk=0;                             \n";
      print SIM_PARM_FILE  "START=0;                             \n";
      print SIM_PARM_FILE  "@ (posedge clk);                             \n";
      print SIM_PARM_FILE  "@ (posedge clk);                             \n";
      print SIM_PARM_FILE  "@ (posedge clk) ;                             \n";
      print SIM_PARM_FILE  "START = 1;                             \n";
      print SIM_PARM_FILE  "end                       \n";
      print SIM_PARM_FILE  "always@(posedge clk)           \n";
      print SIM_PARM_FILE  "if(START && FINISH)           \n";
      print SIM_PARM_FILE  "begin           \n";
      print SIM_PARM_FILE  "   if(failed)        \n";
      print SIM_PARM_FILE  "     begin        \n";
      print SIM_PARM_FILE  "     \$display(\"%t  SIM over: ERROR    %d failures\",\$realtime ,failcount );        \n";
      print SIM_PARM_FILE  "     end        \n";
      print SIM_PARM_FILE  "  else        \n";
      print SIM_PARM_FILE  "     begin        \n";
      print SIM_PARM_FILE  "     \$display(\"%t  SIM over: PASSED\",\$realtime  );        \n";
      print SIM_PARM_FILE  "     end // else: !if(failed)        \n";
      print SIM_PARM_FILE  "\$dumpflush;           \n";
      print SIM_PARM_FILE  "\$finish;           \n";
      print SIM_PARM_FILE  "end           \n";
      print SIM_PARM_FILE  "always@(posedge clk or negedge START)        \n";
      print SIM_PARM_FILE  "if(!START)        \n";
      print SIM_PARM_FILE  "begin        \n";
      print SIM_PARM_FILE  "failed <= 1\'b0;        \n";
      print SIM_PARM_FILE  "failcount <= 32\'h0;        \n";
      print SIM_PARM_FILE  "end        \n";
      print SIM_PARM_FILE  "else        \n";
      print SIM_PARM_FILE  "begin        \n";
      print SIM_PARM_FILE  "if(FAIL)        \n";
      print SIM_PARM_FILE  "begin        \n";
      print SIM_PARM_FILE  "failed <= 1\'b1;        \n";
      print SIM_PARM_FILE  "failcount <= failcount + 32\'h00000001;        \n";
      print SIM_PARM_FILE  "end        \n";
      print SIM_PARM_FILE  "else        \n";
      print SIM_PARM_FILE  "begin        \n";
      print SIM_PARM_FILE  "failed <= failed;        \n";
      print SIM_PARM_FILE  "failcount <= failcount;        \n";
      print SIM_PARM_FILE  "end        \n";
      print SIM_PARM_FILE  "end           \n";
 
      print SIM_PARM_FILE  "always                       \n";
      print SIM_PARM_FILE  " #($local_parameters{\"PERIOD\"}/2) clk = !clk;                       \n";
      print SIM_PARM_FILE  "`include \"./test_define\"                                \n";
 
 
 
      print SIM_PARM_FILE  "     $module_name   \n";
      my $first =1;
      foreach  my  $parameter_name  (@local_order)
         {
         my($parameter_default)  =    $local_parameters{$parameter_name};
         if($first)
           {
           print SIM_PARM_FILE  "   #(  .${parameter_name}(${parameter_default})";
           $first = 0;
           }
         else
           {
           print SIM_PARM_FILE  ",\n       .${parameter_name}(${parameter_default})";
           }
         }
      print SIM_PARM_FILE  ") \n test \n (.clk(clk),.START(START),.FAIL(FAIL),.FINISH(FINISH)); \n\n\n\n";
      print SIM_PARM_FILE  "task automatic next;           \n";
      print SIM_PARM_FILE  "  input [31:0] num;           \n";
      print SIM_PARM_FILE  "  repeat (num)       @ (posedge clk);           \n";
      print SIM_PARM_FILE  "endtask            \n";
      print SIM_PARM_FILE  "           \n";
      print SIM_PARM_FILE  "           \n";
      print SIM_PARM_FILE  "initial           \n";
      print SIM_PARM_FILE  "   begin           \n";
      print SIM_PARM_FILE  "   next($local_parameters{\"TIMEOUT\"});           \n";
      print SIM_PARM_FILE  "   \$display(\"%t  Sim over :ERROR    TIMEOUT\",\$realtime  );           \n";
      print SIM_PARM_FILE  "   @ (posedge clk)           \n";
      print SIM_PARM_FILE  "   \$dumpflush;                      \n";
      print SIM_PARM_FILE  "   \$finish;                         \n";
      print SIM_PARM_FILE  "   end           \n";
      print SIM_PARM_FILE  "            \n";
 
 
 
 
 
 
      print SIM_PARM_FILE  "endmodule                                \n";
 
 
 
 
 
      }
 
 
 
 
 
 

Browse

Tools

Subversion Repositories socgen

[/] [socgen/] [trunk/] [tools/] [simulation/] [build_icarus_filelists] - Blame information for rev 135

Line No.	Rev	Author	Line
1	125	jt_eaton	eval 'exec `which perl` -S $0 ${1+"$@"}'
2			`if 0;`
3	135	jt_eaton	`#/****************************************************************************/`
4			`#/* */`
5			`#/* SOCGEN Design for Reuse toolset */`
6			`#/* */`
7			`#/* Version 1.0.0 */`
8			`#/* */`
9			`#/* Author(s): */`
10			`#/* - John Eaton, z3qmtr45@gmail.com */`
11			`#/* */`
12			`#/****************************************************************************/`
13			`#/* */`
14			`#/* */`
15			`#/* Copyright 2016 John T Eaton */`
16			`#/* */`
17			`#/* Licensed under the Apache License, Version 2.0 (the "License"); */`
18			`#/* you may not use this file except in compliance with the License. */`
19			`#/* You may obtain a copy of the License at */`
20			`#/* */`
21			`#/* http://www.apache.org/licenses/LICENSE-2.0 */`
22			`#/* */`
23			`#/* Unless required by applicable law or agreed to in writing, software */`
24			`#/* distributed under the License is distributed on an "AS IS" BASIS, */`
25			`#/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. */`
26			`#/* See the License for the specific language governing permissions and */`
27			`#/* limitations under the License. */`
28			`#/* */`
29			`#/* */`
30			`#/****************************************************************************/`
31	125	jt_eaton
32
33			`############################################################################`
34			`# General PERL config`
35			`############################################################################`
36			`use Getopt::Long;`
37			`use English;`
38			`use File::Basename;`
39			`use Cwd;`
40			`use XML::LibXML;`
41			`use lib './tools';`
42			`use sys::lib;`
43			`use yp::lib;`
44	134	jt_eaton	`use BerkeleyDB;`
45	125	jt_eaton
46	134	jt_eaton
47	125	jt_eaton	`$OUTPUT_AUTOFLUSH = 1; # set autoflush of stdout to TRUE.`
48
49
50			`############################################################################`
51			`### Process the options`
52			`############################################################################`
53			`Getopt::Long::config("require_order", "prefix=-");`
54			`GetOptions("h","help",`
55			`"work_site=s" => \$work_site,`
56			`"vendor=s" => \$vendor,`
57	131	jt_eaton	`"library=s" => \$library,`
58	125	jt_eaton	`"component=s" => \$component,`
59			`"version=s" => \$version`
60			`) \|\| die "(use '$program_name -h' for help)";`
61
62
63
64			`##############################################################################`
65			`## Help option`
66			`##############################################################################`
67			`if ( $opt_h or $opt_help)`
68	131	jt_eaton	`{ print "\n build_icarus_filelists -work_site /work -vendor vendor_name -library library_name -component component_name ";`
69	125	jt_eaton	`print "\n";`
70			`exit 1;`
71			`}`
72
73
74			`##############################################################################`
75			`##`
76			`##############################################################################`
77
78
79
80			`$home = cwd();`
81
82			`my $variant = "";`
83			`if($version) {$variant = "${component}_${version}"}`
84			`else {$variant = "${component}"}`
85
86			`#############################################################################`
87			`##`
88			`##`
89			`#############################################################################`
90
91			`my $parser = XML::LibXML->new();`
92
93
94
95			`#/*********************************************************************************************/`
96			`#/ */`
97			`#/ Create filelists for simulation, code coverage */`
98			`#/ */`
99			`#/ */`
100			`#/*********************************************************************************************/`
101
102			`@filelist_sim = ( );`
103
104
105
106
107
108
109
110
111			`#############################################################################`
112			`##`
113			`##`
114			`#############################################################################`
115
116	131	jt_eaton	`print "Building SIM filelists for $work_site $vendor $library $component $version $variant \n" ;`
117	130	jt_eaton	`my $sim_library_path ;`
118	131	jt_eaton	`my $spirit_component_file = $parser->parse_file(yp::lib::find_ipxact_component($vendor,$library,$component,$version));`
119			`my $socgen_file = $parser->parse_file(yp::lib::find_componentConfiguration($vendor,$library,$component));`
120			`my $lib_comp_sep = yp::lib::find_lib_comp_sep($vendor,$library,$component);`
121	125	jt_eaton
122	130	jt_eaton	`my $sim_comp_path = $socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:comp_path/text()")->to_literal;`
123	125	jt_eaton
124	130	jt_eaton	`if ($sim_comp_path)`
125			`{`
126			`$sim_library_path ="${lib_comp_sep}${sim_comp_path}";`
127			`}`
128			`else`
129			`{`
130			`$sim_library_path = $socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:library_path/text()")->to_literal;`
131			`}`
132	125	jt_eaton
133
134			`#/*********************************************************************************************/`
135			`#/ */`
136			`#/ */`
137			`#/ Read each variants parameters and defaults into an array and their order into an array */`
138			`#/ order must be preservered so that parameters can use the values of other parameters */`
139			`#/ */`
140			`#/*********************************************************************************************/`
141
142			`my %default_parameters = ();`
143			`my @parameter_order = ();`
144
145
146	130	jt_eaton	`foreach my $i_name ($socgen_file->findnodes("//socgen:configurations/socgen:configuration[socgen:name/text() = '$variant']/socgen:parameters/socgen:parameter"))`
147	125	jt_eaton	`{`
148			`my($parameter_name) = $i_name ->findnodes('socgen:name/text()')->to_literal ;`
149			`my($parameter_default) = $i_name ->findnodes('socgen:value/text()')->to_literal ;`
150			`$default_parameters{$parameter_name} = $parameter_default;`
151			`push @parameter_order ,$parameter_name ;`
152			`}`
153
154
155
156
157
158
159
160
161
162	135	jt_eaton	`foreach my $comp ($spirit_component_file->findnodes('//ipxact:component'))`
163	125	jt_eaton	`{`
164	135	jt_eaton	`my($vendor) = $comp->findnodes('./ipxact:vendor/text()')->to_literal ;`
165			`my($library) = $comp->findnodes('./ipxact:library/text()')->to_literal ;`
166			`my($name) = $comp->findnodes('./ipxact:name/text()')->to_literal ;`
167			`my($version) = $comp->findnodes('./ipxact:version/text()')->to_literal ;`
168	125	jt_eaton	`my $variant = "";`
169			`if($version) {$variant = "${name}_${version}"}`
170			`else {$variant = "${name}"}`
171	131	jt_eaton	`print "rtl/gen directories for $library - $component VLNV $vendor - $library - $name - $variant \n";`
172	126	jt_eaton	`$module_name = yp::lib::get_module_name($vendor,$library,$name,$version);`
173	125	jt_eaton	`}`
174
175
176	131	jt_eaton	`print "CREATING componentRef filelists for $library $component $name $variant \n";`
177	125	jt_eaton
178
179			`#/*********************************************************************************************/`
180			`#/ */`
181			`#/ */`
182			`#/ */`
183			`#/ */`
184			`#/ */`
185			`#/ */`
186			`#/*********************************************************************************************/`
187
188
189	130	jt_eaton	`foreach my $i_name ($socgen_file->findnodes("//socgen:testbench[socgen:variant/text() = '$variant']/socgen:code_coverage"))`
190	125	jt_eaton	`{`
191
192	131	jt_eaton	`my $path ="${home}${work_site}/${vendor}__${library}${sim_library_path}/cov";`
193	125	jt_eaton	`mkdir $path,0755 unless( -e $path );`
194	131	jt_eaton	`$path ="${home}${work_site}/${vendor}__${library}${sim_library_path}/cov/${variant}";`
195	125	jt_eaton	`mkdir $path,0755 unless( -e $path );`
196
197	128	jt_eaton
198	131	jt_eaton	`my $outfile ="${home}${work_site}/${vendor}__${library}${sim_library_path}/cov/${variant}/TestBench";`
199	125	jt_eaton	`open DUTFILE,">$outfile" or die "unable to open $outfile";`
200			print DUTFILE "`timescale 1ns/1ns \n";
201			`print DUTFILE " module TB(); \n";`
202	128	jt_eaton
203	134	jt_eaton
204
205
206	128	jt_eaton	`print DUTFILE " $module_name \n";`
207			`my $first =1;`
208			`foreach my $parameter_name (@parameter_order)`
209			`{`
210			`my($parameter_default) = $default_parameters{$parameter_name};`
211			`if($first)`
212			`{`
213			`print DUTFILE " #( .${parameter_name}(${parameter_default})";`
214			`$first = 0;`
215			`}`
216			`else`
217			`{`
218			`print DUTFILE ",\n .${parameter_name}(${parameter_default})";`
219			`}`
220			`}`
221			`if($first)`
222			`{`
223	134	jt_eaton	`print DUTFILE "\n test \n (); \n\n\n\n";`
224	128	jt_eaton	`}`
225			`else`
226			`{`
227	134	jt_eaton	`print DUTFILE ") \n test \n (); \n\n\n\n";`
228	128	jt_eaton	`}`
229
230
231	125	jt_eaton	`print DUTFILE " endmodule \n";`
232	128	jt_eaton
233
234
235
236
237
238
239
240
241
242
243
244	125	jt_eaton	`}`
245
246
247
248			`#/*********************************************************************************************/`
249			`#/ */`
250			`#/ Make simulation file set */`
251			`#/ */`
252			`#/ */`
253			`#/ */`
254			`#/ */`
255			`#/*********************************************************************************************/`
256
257	131	jt_eaton	`print "CREATING sim files for $library $component $chip $name $variant \n";`
258	125	jt_eaton
259
260
261
262
263
264	130	jt_eaton	`foreach my $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:icarus/socgen:test[socgen:variant/text() = '$variant']"))`
265	125	jt_eaton	`{`
266			`my($simulation) = $i_name ->findnodes('socgen:name/text()')->to_literal ;`
267			`my($configuration) = $i_name ->findnodes('socgen:configuration/text()')->to_literal ;`
268	131	jt_eaton	`print " sim files for $library $component $variant $simulation $configuration \n";`
269	125	jt_eaton
270
271	134	jt_eaton
272
273
274			`my $design_db_filename = yp::lib::get_design_db_file;`
275			`my $design_db = new BerkeleyDB::Hash( -Filename => $design_db_filename, -Flags => DB_CREATE ) or die "Cannot open ${design_db_filename}: $!";`
276
277
278
279			`my $data_db_filename = yp::lib::get_elab_db_filename($vendor,$library,$component,$version,$simulation);`
280			`my $data_db = new BerkeleyDB::Hash( -Filename => $data_db_filename, -Flags => DB_CREATE ) or die "Cannot open ${data_db_filename}: $!";`
281
282
283			`my $key;`
284			`my $value;`
285
286
287			`my @configs = ();`
288
289
290			`my $cursor = $data_db ->db_cursor() ;`
291			`while ($cursor->c_get($key, $value, DB_NEXT) == 0)`
292			`{`
293
294
295			`$_ = $key;`
296			`if(/parameter_root__(\S+)/)`
297			`{`
298			`# print "$key $value \n";`
299			`push @configs,"${1}--${value}:::";`
300			`}`
301
302			`}`
303
304			`my $status = $cursor->c_close() ;`
305
306			`$data_db -> db_close();`
307
308			`@configs = sys::lib::trim_sort(@configs);`
309
310			`my $config_n;`
311
312			`foreach my $config (@configs)`
313			`{`
314			`$config_n = "${config}${config_n}";`
315			`}`
316
317			`my $new_value;`
318			`$config_n="CONFIG___${config_n}";`
319			`$design_db->db_get($config_n, $new_value );`
320			`$config_n=$new_value;`
321
322
323
324	131	jt_eaton	`my $outfile ="${home}${work_site}/${vendor}__${library}${sim_library_path}/icarus/${simulation}/TestBench";`
325	125	jt_eaton	`open SIM_PARM_FILE,">$outfile" or die "unable to open $outfile";`
326
327
328			`my %local_parameters = %default_parameters;`
329			`my @local_order = @parameter_order;`
330
331
332
333	130	jt_eaton	`foreach my $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:testbenches/socgen:testbench[socgen:variant/text() = '$variant']/./socgen:parameters/socgen:parameter/socgen:name"))`
334	125	jt_eaton	`{`
335			`my($par_name) = $i_name ->findnodes('./text()')->to_literal ;`
336			`my($par_value) = $i_name ->findnodes('../socgen:value/text()')->to_literal ;`
337			`if ( $local_parameters{$par_name} eq '' ) { push @local_order , $par_name; }`
338			`$local_parameters{$par_name} = $par_value;`
339			`}`
340
341
342
343	130	jt_eaton	`foreach my $i_name ($socgen_file->findnodes("//socgen:configurations/socgen:configuration[socgen:name/text() = '$configuration']/./socgen:parameters/socgen:parameter/socgen:name"))`
344	125	jt_eaton	`{`
345			`my($par_name) = $i_name ->findnodes('./text()')->to_literal ;`
346			`my($par_value) = $i_name ->findnodes('../socgen:value/text()')->to_literal ;`
347			`if($local_parameters{$par_name} eq '' ) { push @local_order , $par_name; }`
348			`$local_parameters{$par_name} = $par_value;`
349			`}`
350
351
352
353	130	jt_eaton	`foreach my $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:icarus/socgen:test[socgen:name/text() = '$simulation']/./socgen:parameters/socgen:parameter/socgen:name"))`
354	125	jt_eaton	`{`
355			`my($par_name) = $i_name ->findnodes('./text()')->to_literal ;`
356			`my($par_value) = $i_name ->findnodes('../socgen:value/text()')->to_literal ;`
357			`if ( $local_parameters{$par_name} eq '' ) { push @local_order , $par_name; }`
358			`$local_parameters{$par_name} = $par_value;`
359			`}`
360
361
362
363
364
365
366
367
368
369	131	jt_eaton	`print SIM_PARM_FILE "// Testbench for $library $component $variant $configuration $simulation\n";`
370	125	jt_eaton	print SIM_PARM_FILE "`ifndef TIMESCALE \n";
371			print SIM_PARM_FILE "`define TIMESCALE 1ns/1ns \n";
372			print SIM_PARM_FILE "`endif \n";
373			`print SIM_PARM_FILE " \n";`
374			print SIM_PARM_FILE "`ifndef TIMEFORMAT \n";
375			print SIM_PARM_FILE "`define TIMEFORMAT \$timeformat(-6, 2, \" us\", 14); \n";
376			print SIM_PARM_FILE "`endif \n";
377			`print SIM_PARM_FILE " \n";`
378			print SIM_PARM_FILE "`timescale `TIMESCALE \n";
379			`print SIM_PARM_FILE " \n";`
380			`print SIM_PARM_FILE "module TB(); \n";`
381			`print SIM_PARM_FILE " \n";`
382			`print SIM_PARM_FILE "initial \n";`
383			`print SIM_PARM_FILE "begin \n";`
384			print SIM_PARM_FILE "`TIMEFORMAT \n";
385			`print SIM_PARM_FILE "end \n";`
386			`print SIM_PARM_FILE " \n";`
387			print SIM_PARM_FILE "`ifdef VCD \n";
388			`print SIM_PARM_FILE "initial \n";`
389			`print SIM_PARM_FILE " begin \n";`
390			print SIM_PARM_FILE "`include \"./dmp_define\" \n";
391			`print SIM_PARM_FILE " end \n";`
392			print SIM_PARM_FILE "`endif \n";
393			`print SIM_PARM_FILE " reg clk,START; \n";`
394			`print SIM_PARM_FILE " wire FAIL,FINISH; \n";`
395			`print SIM_PARM_FILE " reg failed; \n";`
396			`print SIM_PARM_FILE " reg [31:0] failcount; \n";`
397			`print SIM_PARM_FILE "initial \n";`
398			`print SIM_PARM_FILE "begin \n";`
399			`print SIM_PARM_FILE "clk=0; \n";`
400			`print SIM_PARM_FILE "START=0; \n";`
401			`print SIM_PARM_FILE "@ (posedge clk); \n";`
402			`print SIM_PARM_FILE "@ (posedge clk); \n";`
403			`print SIM_PARM_FILE "@ (posedge clk) ; \n";`
404			`print SIM_PARM_FILE "START = 1; \n";`
405			`print SIM_PARM_FILE "end \n";`
406			`print SIM_PARM_FILE "always@(posedge clk) \n";`
407			`print SIM_PARM_FILE "if(START && FINISH) \n";`
408			`print SIM_PARM_FILE "begin \n";`
409			`print SIM_PARM_FILE " if(failed) \n";`
410			`print SIM_PARM_FILE " begin \n";`
411			`print SIM_PARM_FILE " \$display(\"%t SIM over: ERROR %d failures\",\$realtime ,failcount ); \n";`
412			`print SIM_PARM_FILE " end \n";`
413			`print SIM_PARM_FILE " else \n";`
414			`print SIM_PARM_FILE " begin \n";`
415			`print SIM_PARM_FILE " \$display(\"%t SIM over: PASSED\",\$realtime ); \n";`
416			`print SIM_PARM_FILE " end // else: !if(failed) \n";`
417			`print SIM_PARM_FILE "\$dumpflush; \n";`
418			`print SIM_PARM_FILE "\$finish; \n";`
419			`print SIM_PARM_FILE "end \n";`
420			`print SIM_PARM_FILE "always@(posedge clk or negedge START) \n";`
421			`print SIM_PARM_FILE "if(!START) \n";`
422			`print SIM_PARM_FILE "begin \n";`
423			`print SIM_PARM_FILE "failed <= 1\'b0; \n";`
424			`print SIM_PARM_FILE "failcount <= 32\'h0; \n";`
425			`print SIM_PARM_FILE "end \n";`
426			`print SIM_PARM_FILE "else \n";`
427			`print SIM_PARM_FILE "begin \n";`
428			`print SIM_PARM_FILE "if(FAIL) \n";`
429			`print SIM_PARM_FILE "begin \n";`
430			`print SIM_PARM_FILE "failed <= 1\'b1; \n";`
431			`print SIM_PARM_FILE "failcount <= failcount + 32\'h00000001; \n";`
432			`print SIM_PARM_FILE "end \n";`
433			`print SIM_PARM_FILE "else \n";`
434			`print SIM_PARM_FILE "begin \n";`
435			`print SIM_PARM_FILE "failed <= failed; \n";`
436			`print SIM_PARM_FILE "failcount <= failcount; \n";`
437			`print SIM_PARM_FILE "end \n";`
438			`print SIM_PARM_FILE "end \n";`
439
440			`print SIM_PARM_FILE "always \n";`
441			`print SIM_PARM_FILE " #($local_parameters{\"PERIOD\"}/2) clk = !clk; \n";`
442			print SIM_PARM_FILE "`include \"./test_define\" \n";
443
444
445	126	jt_eaton
446	125	jt_eaton	`print SIM_PARM_FILE " $module_name \n";`
447			`my $first =1;`
448			`foreach my $parameter_name (@local_order)`
449			`{`
450			`my($parameter_default) = $local_parameters{$parameter_name};`
451			`if($first)`
452			`{`
453			`print SIM_PARM_FILE " #( .${parameter_name}(${parameter_default})";`
454			`$first = 0;`
455			`}`
456			`else`
457			`{`
458			`print SIM_PARM_FILE ",\n .${parameter_name}(${parameter_default})";`
459			`}`
460			`}`
461	134	jt_eaton	`print SIM_PARM_FILE ") \n test \n (.clk(clk),.START(START),.FAIL(FAIL),.FINISH(FINISH)); \n\n\n\n";`
462	125	jt_eaton	`print SIM_PARM_FILE "task automatic next; \n";`
463			`print SIM_PARM_FILE " input [31:0] num; \n";`
464			`print SIM_PARM_FILE " repeat (num) @ (posedge clk); \n";`
465			`print SIM_PARM_FILE "endtask \n";`
466			`print SIM_PARM_FILE " \n";`
467			`print SIM_PARM_FILE " \n";`
468			`print SIM_PARM_FILE "initial \n";`
469			`print SIM_PARM_FILE " begin \n";`
470			`print SIM_PARM_FILE " next($local_parameters{\"TIMEOUT\"}); \n";`
471			`print SIM_PARM_FILE " \$display(\"%t Sim over :ERROR TIMEOUT\",\$realtime ); \n";`
472			`print SIM_PARM_FILE " @ (posedge clk) \n";`
473			`print SIM_PARM_FILE " \$dumpflush; \n";`
474			`print SIM_PARM_FILE " \$finish; \n";`
475			`print SIM_PARM_FILE " end \n";`
476			`print SIM_PARM_FILE " \n";`
477
478
479
480
481
482
483			`print SIM_PARM_FILE "endmodule \n";`
484
485
486
487
488
489			`}`
490
491
492
493
494
495