URL https://opencores.org/ocsvn/socgen/socgen/trunk

Subversion Repositories socgen

[/] [socgen/] [trunk/] [tools/] [simulation/] [build_icarus_filelists.cand] - Blame information for rev 135

Details | Compare with Previous | View Log


eval 'exec `which perl` -S $0 ${1+"$@"}'
   if 0;
 
#/**********************************************************************/
#/*                                                                    */
#/*             -------                                                */
#/*            /   SOC  \                                              */
#/*           /    GEN   \                                             */
#/*          /    TOOL    \                                            */
#/*          ==============                                            */
#/*          |            |                                            */
#/*          |____________|                                            */
#/*                                                                    */
#/*                                                                    */
#/*                                                                    */
#/*  Author(s):                                                        */
#/*      - John Eaton, jt_eaton@opencores.org                          */
#/*                                                                    */
#/**********************************************************************/
#/*                                                                    */
#/*    Copyright (C) <2010-2011>                */
#/*                                                                    */
#/*  This source file may be used and distributed without              */
#/*  restriction provided that this copyright statement is not         */
#/*  removed from the file and that any derivative work contains       */
#/*  the original copyright notice and the associated disclaimer.      */
#/*                                                                    */
#/*  This source file is free software; you can redistribute it        */
#/*  and/or modify it under the terms of the GNU Lesser General        */
#/*  Public License as published by the Free Software Foundation;      */
#/*  either version 2.1 of the License, or (at your option) any        */
#/*  later version.                                                    */
#/*                                                                    */
#/*  This source is distributed in the hope that it will be            */
#/*  useful, but WITHOUT ANY WARRANTY; without even the implied        */
#/*  warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR           */
#/*  PURPOSE.  See the GNU Lesser General Public License for more      */
#/*  details.                                                          */
#/*                                                                    */
#/*  You should have received a copy of the GNU Lesser General         */
#/*  Public License along with this source; if not, download it        */
#/*  from http://www.opencores.org/lgpl.shtml                          */
#/*                                                                    */
#/**********************************************************************/
 
 
 
 
############################################################################
# General PERL config
############################################################################
use Getopt::Long;
use English;
use File::Basename;
use Cwd;
use XML::LibXML;
use lib './tools';
use sys::lib;
use yp::lib;
use BerkeleyDB;
 
 
$OUTPUT_AUTOFLUSH = 1; # set autoflush of stdout to TRUE.
 
 
############################################################################
### Process the options
############################################################################
Getopt::Long::config("require_order", "prefix=-");
GetOptions("h","help",
           "work_site=s" => \$work_site,
           "vendor=s" => \$vendor,
           "library=s" => \$library,
           "component=s" => \$component,
           "version=s" => \$version
) || die "(use '$program_name -h' for help)";
 
 
 
##############################################################################
## Help option
##############################################################################
if ( $opt_h  or $opt_help)
  { print "\n build_icarus_filelists -work_site /work  -vendor vendor_name  -library library_name  -component component_name   ";
    print "\n";
    exit 1;
  }
 
 
##############################################################################
##
##############################################################################
 
 
 
$home = cwd();
 
my $variant = "";
if($version) {$variant = "${component}_${version}"}
else         {$variant = "${component}"}
 
#############################################################################
##
##
#############################################################################
 
my $parser = XML::LibXML->new();
 
 
 
#/*********************************************************************************************/
#/                                                                                            */
#/  Create filelists for simulation, code coverage                                            */
#/                                                                                            */
#/                                                                                            */
#/*********************************************************************************************/
 
@filelist_sim = (  );
 
 
 
 
 
 
 
 
#############################################################################
##
##
#############################################################################
 
print "Building SIM filelists for  $work_site  $vendor $library   $component $version $variant \n" ;
my $sim_library_path ;
my $spirit_component_file    = $parser->parse_file(yp::lib::find_ipxact_component($vendor,$library,$component,$version));
my $socgen_file               = $parser->parse_file(yp::lib::find_componentConfiguration($vendor,$library,$component));
my $lib_comp_sep             = yp::lib::find_lib_comp_sep($vendor,$library,$component);
 
my $sim_comp_path            = $socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:comp_path/text()")->to_literal;
 
if ($sim_comp_path)
{
$sim_library_path            ="${lib_comp_sep}${sim_comp_path}";
}
else
{
$sim_library_path            = $socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:library_path/text()")->to_literal;
}
 
 
#/*********************************************************************************************/
#/                                                                                            */
#/                                                                                            */
#/  Read each variants parameters and defaults into an array and their order into an array    */
#/  order must be preservered so that parameters can use the values of other parameters       */
#/                                                                                            */
#/*********************************************************************************************/
 
my %default_parameters = ();
my @parameter_order    = ();
 
 
foreach  my   $i_name ($socgen_file->findnodes("//socgen:configurations/socgen:configuration[socgen:name/text() = '$variant']/socgen:parameters/socgen:parameter"))
      {
      my($parameter_name)     = $i_name ->findnodes('socgen:name/text()')->to_literal ;
      my($parameter_default)  = $i_name ->findnodes('socgen:value/text()')->to_literal ;
      $default_parameters{$parameter_name}  = $parameter_default;
      push  @parameter_order ,$parameter_name ;
      }
 
 
 
 
 
 
 
 
 
foreach my $comp ($spirit_component_file->findnodes('//ipxact:component'))
   {
   my($vendor)   = $comp->findnodes('./ipxact:vendor/text()')->to_literal ;
   my($library)  = $comp->findnodes('./ipxact:library/text()')->to_literal ;
   my($name)     = $comp->findnodes('./ipxact:name/text()')->to_literal ;
   my($version)  = $comp->findnodes('./ipxact:version/text()')->to_literal ;
   my $variant = "";
   if($version) {$variant = "${name}_${version}"}
   else         {$variant = "${name}"}
   print "rtl/gen directories  for    $library - $component         VLNV        $vendor - $library -  $name -  $variant \n";
   $module_name = yp::lib::get_module_name($vendor,$library,$name,$version);
   }
 
 
   print "CREATING componentRef filelists for   $library   $component  $name $variant \n";
 
 
   #/*********************************************************************************************/
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/*********************************************************************************************/
 
 
foreach  my   $i_name ($socgen_file->findnodes("//socgen:testbench[socgen:variant/text() = '$variant']/socgen:code_coverage"))
   {
 
   my $path ="${home}${work_site}/${vendor}__${library}${sim_library_path}/cov";
   mkdir $path,0755          unless( -e $path );
   $path ="${home}${work_site}/${vendor}__${library}${sim_library_path}/cov/${variant}";
   mkdir $path,0755          unless( -e $path );
 
 
   my $outfile ="${home}${work_site}/${vendor}__${library}${sim_library_path}/cov/${variant}/TestBench";
   open  DUTFILE,">$outfile" or die "unable to open $outfile";
   print  DUTFILE  "`timescale    1ns/1ns   \n";
   print  DUTFILE  " module TB();   \n";
 
 
 
 
      print DUTFILE  "     $module_name   \n";
      my $first =1;
      foreach  my  $parameter_name  (@parameter_order)
         {
         my($parameter_default)  =    $default_parameters{$parameter_name};
         if($first)
           {
           print DUTFILE  "   #(  .${parameter_name}(${parameter_default})";
           $first = 0;
           }
         else
           {
           print DUTFILE  ",\n       .${parameter_name}(${parameter_default})";
           }
         }
         if($first)
           {
           print DUTFILE  "\n  test \n (); \n\n\n\n";
           }
          else
           {
           print DUTFILE  ") \n test \n (); \n\n\n\n";
           }
 
 
   print  DUTFILE  " endmodule   \n";
 
 
 
 
 
 
 
 
 
 
 
 
   }
 
 
 
   #/*********************************************************************************************/
   #/                                                                                            */
   #/ Make simulation file set                                                                   */
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/                                                                                            */
   #/*********************************************************************************************/
 
   print "CREATING sim files for   $library  $component   $chip   $name  $variant \n";
 
 
 
 
 
 
    foreach  my   $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:icarus/socgen:test[socgen:variant/text() = '$variant']"))
      {
      my($simulation)      = $i_name ->findnodes('socgen:name/text()')->to_literal ;
      my($configuration)   = $i_name ->findnodes('socgen:configuration/text()')->to_literal ;
      print " sim files for   $library  $component   $variant  $simulation $configuration          \n";
 
 
 
 
 
     my $design_db_filename = yp::lib::get_design_db_file;
     my $design_db   = new BerkeleyDB::Hash( -Filename => $design_db_filename, -Flags => DB_CREATE ) or die "Cannot open ${design_db_filename}: $!";
 
 
 
     my $data_db_filename = yp::lib::get_elab_db_filename($vendor,$library,$component,$version,$simulation);
     my $data_db   = new BerkeleyDB::Hash( -Filename => $data_db_filename, -Flags => DB_CREATE ) or die "Cannot open ${data_db_filename}: $!";
 
 
     my $key;
     my $value;
 
 
     my @configs = ();
 
 
     my $cursor = $data_db ->db_cursor() ;
     while ($cursor->c_get($key, $value, DB_NEXT) == 0)
       {
 
 
       $_ = $key;
       if(/parameter_root__(\S+)/)
         {
#         print "$key $value  \n";
         push @configs,"${1}--${value}:::";
         }
 
       }
 
       my $status = $cursor->c_close() ;
 
       $data_db   -> db_close();
 
       @configs      = sys::lib::trim_sort(@configs);
 
       my $config_n;
 
       foreach my $config (@configs)
              {
              $config_n = "${config}${config_n}";
              }
 
      my $new_value;
      $config_n="CONFIG___${config_n}";
      $design_db->db_get($config_n, $new_value );
      $config_n=$new_value;
 
 
 
      my $outfile ="${home}${work_site}/${vendor}__${library}${sim_library_path}/icarus/${simulation}/TestBench";
      open SIM_PARM_FILE,">$outfile" or die "unable to open $outfile";
 
      my %local_parameters =  %default_parameters;
      my @local_order      =  @parameter_order;
 
 
 
      foreach  my   $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:testbenches/socgen:testbench[socgen:variant/text() = '$variant']/./socgen:parameters/socgen:parameter/socgen:name"))
         {
         my($par_name)   = $i_name ->findnodes('./text()')->to_literal ;
         my($par_value)  = $i_name ->findnodes('../socgen:value/text()')->to_literal ;
         if  ( $local_parameters{$par_name} eq '' )  { push @local_order , $par_name; }
         $local_parameters{$par_name} = $par_value;
         }
 
 
 
      foreach  my   $i_name ($socgen_file->findnodes("//socgen:configurations/socgen:configuration[socgen:name/text() = '$configuration']/./socgen:parameters/socgen:parameter/socgen:name"))
         {
         my($par_name)   = $i_name ->findnodes('./text()')->to_literal ;
         my($par_value)  = $i_name ->findnodes('../socgen:value/text()')->to_literal ;
         if($local_parameters{$par_name} eq '' )  { push @local_order , $par_name; }
         $local_parameters{$par_name} = $par_value;
         }
 
 
 
      foreach  my   $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:icarus/socgen:test[socgen:name/text() = '$simulation']/./socgen:parameters/socgen:parameter/socgen:name"))
         {
         my($par_name)   = $i_name ->findnodes('./text()')->to_literal ;
         my($par_value)  = $i_name ->findnodes('../socgen:value/text()')->to_literal ;
         if  ( $local_parameters{$par_name} eq '' )  { push @local_order , $par_name; }
         $local_parameters{$par_name} = $par_value;
         }
 
 
 
 
 
 
 
 
 
      print SIM_PARM_FILE  "//  Testbench  for  $library    $component    $variant   $configuration    $simulation\n";
      print SIM_PARM_FILE  "`ifndef     TIMESCALE                                \n";
      print SIM_PARM_FILE  "`define     TIMESCALE   1ns/1ns                                \n";
      print SIM_PARM_FILE  "`endif                                \n";
      print SIM_PARM_FILE  "                                \n";
      print SIM_PARM_FILE  "`ifndef     TIMEFORMAT                                \n";
      print SIM_PARM_FILE  "`define     TIMEFORMAT  \$timeformat(-6, 2, \" us\", 14);                                \n";
      print SIM_PARM_FILE  "`endif                                \n";
      print SIM_PARM_FILE  "                                \n";
      print SIM_PARM_FILE  "`timescale `TIMESCALE                                \n";
      print SIM_PARM_FILE  "                                \n";
      print SIM_PARM_FILE  "module TB();                                \n";
      print SIM_PARM_FILE  "                                \n";
      print SIM_PARM_FILE  "initial                                \n";
      print SIM_PARM_FILE  "begin                                \n";
      print SIM_PARM_FILE  "`TIMEFORMAT                                \n";
      print SIM_PARM_FILE  "end                                \n";
      print SIM_PARM_FILE  "                                \n";
      print SIM_PARM_FILE  "`ifdef VCD                                \n";
      print SIM_PARM_FILE  "initial                                \n";
      print SIM_PARM_FILE  " begin                                \n";
      print SIM_PARM_FILE  "`include \"./dmp_define\"                                \n";
      print SIM_PARM_FILE  " end                                \n";
      print SIM_PARM_FILE  "`endif                                \n";
      print SIM_PARM_FILE  " reg clk,START;            \n";
      print SIM_PARM_FILE  " wire FAIL,FINISH;                               \n";
      print SIM_PARM_FILE  " reg  failed;                               \n";
      print SIM_PARM_FILE  " reg [31:0] failcount;                               \n";
      print SIM_PARM_FILE  "initial                             \n";
      print SIM_PARM_FILE  "begin                             \n";
      print SIM_PARM_FILE  "clk=0;                             \n";
      print SIM_PARM_FILE  "START=0;                             \n";
      print SIM_PARM_FILE  "@ (posedge clk);                             \n";
      print SIM_PARM_FILE  "@ (posedge clk);                             \n";
      print SIM_PARM_FILE  "@ (posedge clk) ;                             \n";
      print SIM_PARM_FILE  "START = 1;                             \n";
      print SIM_PARM_FILE  "end                       \n";
      print SIM_PARM_FILE  "always@(posedge clk)           \n";
      print SIM_PARM_FILE  "if(START && FINISH)           \n";
      print SIM_PARM_FILE  "begin           \n";
      print SIM_PARM_FILE  "   if(failed)        \n";
      print SIM_PARM_FILE  "     begin        \n";
      print SIM_PARM_FILE  "     \$display(\"%t  SIM over: ERROR    %d failures\",\$realtime ,failcount );        \n";
      print SIM_PARM_FILE  "     end        \n";
      print SIM_PARM_FILE  "  else        \n";
      print SIM_PARM_FILE  "     begin        \n";
      print SIM_PARM_FILE  "     \$display(\"%t  SIM over: PASSED\",\$realtime  );        \n";
      print SIM_PARM_FILE  "     end // else: !if(failed)        \n";
      print SIM_PARM_FILE  "\$dumpflush;           \n";
      print SIM_PARM_FILE  "\$finish;           \n";
      print SIM_PARM_FILE  "end           \n";
      print SIM_PARM_FILE  "always@(posedge clk or negedge START)        \n";
      print SIM_PARM_FILE  "if(!START)        \n";
      print SIM_PARM_FILE  "begin        \n";
      print SIM_PARM_FILE  "failed <= 1\'b0;        \n";
      print SIM_PARM_FILE  "failcount <= 32\'h0;        \n";
      print SIM_PARM_FILE  "end        \n";
      print SIM_PARM_FILE  "else        \n";
      print SIM_PARM_FILE  "begin        \n";
      print SIM_PARM_FILE  "if(FAIL)        \n";
      print SIM_PARM_FILE  "begin        \n";
      print SIM_PARM_FILE  "failed <= 1\'b1;        \n";
      print SIM_PARM_FILE  "failcount <= failcount + 32\'h00000001;        \n";
      print SIM_PARM_FILE  "end        \n";
      print SIM_PARM_FILE  "else        \n";
      print SIM_PARM_FILE  "begin        \n";
      print SIM_PARM_FILE  "failed <= failed;        \n";
      print SIM_PARM_FILE  "failcount <= failcount;        \n";
      print SIM_PARM_FILE  "end        \n";
      print SIM_PARM_FILE  "end           \n";
 
      print SIM_PARM_FILE  "always                       \n";
      print SIM_PARM_FILE  " #($local_parameters{\"PERIOD\"}/2) clk = !clk;                       \n";
      print SIM_PARM_FILE  "`include \"./test_define\"                                \n";
 
 
 
      print SIM_PARM_FILE  "     ${module_name}_${config_n}   \n";
 
      print SIM_PARM_FILE  "    test \n (.clk(clk),.START(START),.FAIL(FAIL),.FINISH(FINISH)); \n\n\n\n";
      print SIM_PARM_FILE  "task automatic next;           \n";
      print SIM_PARM_FILE  "  input [31:0] num;           \n";
      print SIM_PARM_FILE  "  repeat (num)       @ (posedge clk);           \n";
      print SIM_PARM_FILE  "endtask            \n";
      print SIM_PARM_FILE  "           \n";
      print SIM_PARM_FILE  "           \n";
      print SIM_PARM_FILE  "initial           \n";
      print SIM_PARM_FILE  "   begin           \n";
      print SIM_PARM_FILE  "   next($local_parameters{\"TIMEOUT\"});           \n";
      print SIM_PARM_FILE  "   \$display(\"%t  Sim over :ERROR    TIMEOUT\",\$realtime  );           \n";
      print SIM_PARM_FILE  "   @ (posedge clk)           \n";
      print SIM_PARM_FILE  "   \$dumpflush;                      \n";
      print SIM_PARM_FILE  "   \$finish;                         \n";
      print SIM_PARM_FILE  "   end           \n";
      print SIM_PARM_FILE  "            \n";
 
 
 
 
 
 
      print SIM_PARM_FILE  "endmodule                                \n";
 
 
 
 
 
      }
 
 
 
 
 
 

Browse

Tools

Subversion Repositories socgen

[/] [socgen/] [trunk/] [tools/] [simulation/] [build_icarus_filelists.cand] - Blame information for rev 135

Line No.	Rev	Author	Line
1	135	jt_eaton	eval 'exec `which perl` -S $0 ${1+"$@"}'
2			`if 0;`
3
4			`#/**********************************************************************/`
5			`#/* */`
6			`#/* ------- */`
7			`#/* / SOC \ */`
8			`#/* / GEN \ */`
9			`#/* / TOOL \ */`
10			`#/* ============== */`
11			`#/* \| \| */`
12			`#/* \|____________\| */`
13			`#/* */`
14			`#/* */`
15			`#/* */`
16			`#/* Author(s): */`
17			`#/* - John Eaton, jt_eaton@opencores.org */`
18			`#/* */`
19			`#/**********************************************************************/`
20			`#/* */`
21			`#/* Copyright (C) <2010-2011> */`
22			`#/* */`
23			`#/* This source file may be used and distributed without */`
24			`#/* restriction provided that this copyright statement is not */`
25			`#/* removed from the file and that any derivative work contains */`
26			`#/* the original copyright notice and the associated disclaimer. */`
27			`#/* */`
28			`#/* This source file is free software; you can redistribute it */`
29			`#/* and/or modify it under the terms of the GNU Lesser General */`
30			`#/* Public License as published by the Free Software Foundation; */`
31			`#/* either version 2.1 of the License, or (at your option) any */`
32			`#/* later version. */`
33			`#/* */`
34			`#/* This source is distributed in the hope that it will be */`
35			`#/* useful, but WITHOUT ANY WARRANTY; without even the implied */`
36			`#/* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR */`
37			`#/* PURPOSE. See the GNU Lesser General Public License for more */`
38			`#/* details. */`
39			`#/* */`
40			`#/* You should have received a copy of the GNU Lesser General */`
41			`#/* Public License along with this source; if not, download it */`
42			`#/* from http://www.opencores.org/lgpl.shtml */`
43			`#/* */`
44			`#/**********************************************************************/`
45
46
47
48
49			`############################################################################`
50			`# General PERL config`
51			`############################################################################`
52			`use Getopt::Long;`
53			`use English;`
54			`use File::Basename;`
55			`use Cwd;`
56			`use XML::LibXML;`
57			`use lib './tools';`
58			`use sys::lib;`
59			`use yp::lib;`
60			`use BerkeleyDB;`
61
62
63			`$OUTPUT_AUTOFLUSH = 1; # set autoflush of stdout to TRUE.`
64
65
66			`############################################################################`
67			`### Process the options`
68			`############################################################################`
69			`Getopt::Long::config("require_order", "prefix=-");`
70			`GetOptions("h","help",`
71			`"work_site=s" => \$work_site,`
72			`"vendor=s" => \$vendor,`
73			`"library=s" => \$library,`
74			`"component=s" => \$component,`
75			`"version=s" => \$version`
76			`) \|\| die "(use '$program_name -h' for help)";`
77
78
79
80			`##############################################################################`
81			`## Help option`
82			`##############################################################################`
83			`if ( $opt_h or $opt_help)`
84			`{ print "\n build_icarus_filelists -work_site /work -vendor vendor_name -library library_name -component component_name ";`
85			`print "\n";`
86			`exit 1;`
87			`}`
88
89
90			`##############################################################################`
91			`##`
92			`##############################################################################`
93
94
95
96			`$home = cwd();`
97
98			`my $variant = "";`
99			`if($version) {$variant = "${component}_${version}"}`
100			`else {$variant = "${component}"}`
101
102			`#############################################################################`
103			`##`
104			`##`
105			`#############################################################################`
106
107			`my $parser = XML::LibXML->new();`
108
109
110
111			`#/*********************************************************************************************/`
112			`#/ */`
113			`#/ Create filelists for simulation, code coverage */`
114			`#/ */`
115			`#/ */`
116			`#/*********************************************************************************************/`
117
118			`@filelist_sim = ( );`
119
120
121
122
123
124
125
126
127			`#############################################################################`
128			`##`
129			`##`
130			`#############################################################################`
131
132			`print "Building SIM filelists for $work_site $vendor $library $component $version $variant \n" ;`
133			`my $sim_library_path ;`
134			`my $spirit_component_file = $parser->parse_file(yp::lib::find_ipxact_component($vendor,$library,$component,$version));`
135			`my $socgen_file = $parser->parse_file(yp::lib::find_componentConfiguration($vendor,$library,$component));`
136			`my $lib_comp_sep = yp::lib::find_lib_comp_sep($vendor,$library,$component);`
137
138			`my $sim_comp_path = $socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:comp_path/text()")->to_literal;`
139
140			`if ($sim_comp_path)`
141			`{`
142			`$sim_library_path ="${lib_comp_sep}${sim_comp_path}";`
143			`}`
144			`else`
145			`{`
146			`$sim_library_path = $socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:library_path/text()")->to_literal;`
147			`}`
148
149
150			`#/*********************************************************************************************/`
151			`#/ */`
152			`#/ */`
153			`#/ Read each variants parameters and defaults into an array and their order into an array */`
154			`#/ order must be preservered so that parameters can use the values of other parameters */`
155			`#/ */`
156			`#/*********************************************************************************************/`
157
158			`my %default_parameters = ();`
159			`my @parameter_order = ();`
160
161
162			`foreach my $i_name ($socgen_file->findnodes("//socgen:configurations/socgen:configuration[socgen:name/text() = '$variant']/socgen:parameters/socgen:parameter"))`
163			`{`
164			`my($parameter_name) = $i_name ->findnodes('socgen:name/text()')->to_literal ;`
165			`my($parameter_default) = $i_name ->findnodes('socgen:value/text()')->to_literal ;`
166			`$default_parameters{$parameter_name} = $parameter_default;`
167			`push @parameter_order ,$parameter_name ;`
168			`}`
169
170
171
172
173
174
175
176
177
178			`foreach my $comp ($spirit_component_file->findnodes('//ipxact:component'))`
179			`{`
180			`my($vendor) = $comp->findnodes('./ipxact:vendor/text()')->to_literal ;`
181			`my($library) = $comp->findnodes('./ipxact:library/text()')->to_literal ;`
182			`my($name) = $comp->findnodes('./ipxact:name/text()')->to_literal ;`
183			`my($version) = $comp->findnodes('./ipxact:version/text()')->to_literal ;`
184			`my $variant = "";`
185			`if($version) {$variant = "${name}_${version}"}`
186			`else {$variant = "${name}"}`
187			`print "rtl/gen directories for $library - $component VLNV $vendor - $library - $name - $variant \n";`
188			`$module_name = yp::lib::get_module_name($vendor,$library,$name,$version);`
189			`}`
190
191
192			`print "CREATING componentRef filelists for $library $component $name $variant \n";`
193
194
195			`#/*********************************************************************************************/`
196			`#/ */`
197			`#/ */`
198			`#/ */`
199			`#/ */`
200			`#/ */`
201			`#/ */`
202			`#/*********************************************************************************************/`
203
204
205			`foreach my $i_name ($socgen_file->findnodes("//socgen:testbench[socgen:variant/text() = '$variant']/socgen:code_coverage"))`
206			`{`
207
208			`my $path ="${home}${work_site}/${vendor}__${library}${sim_library_path}/cov";`
209			`mkdir $path,0755 unless( -e $path );`
210			`$path ="${home}${work_site}/${vendor}__${library}${sim_library_path}/cov/${variant}";`
211			`mkdir $path,0755 unless( -e $path );`
212
213
214			`my $outfile ="${home}${work_site}/${vendor}__${library}${sim_library_path}/cov/${variant}/TestBench";`
215			`open DUTFILE,">$outfile" or die "unable to open $outfile";`
216			print DUTFILE "`timescale 1ns/1ns \n";
217			`print DUTFILE " module TB(); \n";`
218
219
220
221
222			`print DUTFILE " $module_name \n";`
223			`my $first =1;`
224			`foreach my $parameter_name (@parameter_order)`
225			`{`
226			`my($parameter_default) = $default_parameters{$parameter_name};`
227			`if($first)`
228			`{`
229			`print DUTFILE " #( .${parameter_name}(${parameter_default})";`
230			`$first = 0;`
231			`}`
232			`else`
233			`{`
234			`print DUTFILE ",\n .${parameter_name}(${parameter_default})";`
235			`}`
236			`}`
237			`if($first)`
238			`{`
239			`print DUTFILE "\n test \n (); \n\n\n\n";`
240			`}`
241			`else`
242			`{`
243			`print DUTFILE ") \n test \n (); \n\n\n\n";`
244			`}`
245
246
247			`print DUTFILE " endmodule \n";`
248
249
250
251
252
253
254
255
256
257
258
259
260			`}`
261
262
263
264			`#/*********************************************************************************************/`
265			`#/ */`
266			`#/ Make simulation file set */`
267			`#/ */`
268			`#/ */`
269			`#/ */`
270			`#/ */`
271			`#/*********************************************************************************************/`
272
273			`print "CREATING sim files for $library $component $chip $name $variant \n";`
274
275
276
277
278
279
280			`foreach my $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:icarus/socgen:test[socgen:variant/text() = '$variant']"))`
281			`{`
282			`my($simulation) = $i_name ->findnodes('socgen:name/text()')->to_literal ;`
283			`my($configuration) = $i_name ->findnodes('socgen:configuration/text()')->to_literal ;`
284			`print " sim files for $library $component $variant $simulation $configuration \n";`
285
286
287
288
289
290			`my $design_db_filename = yp::lib::get_design_db_file;`
291			`my $design_db = new BerkeleyDB::Hash( -Filename => $design_db_filename, -Flags => DB_CREATE ) or die "Cannot open ${design_db_filename}: $!";`
292
293
294
295			`my $data_db_filename = yp::lib::get_elab_db_filename($vendor,$library,$component,$version,$simulation);`
296			`my $data_db = new BerkeleyDB::Hash( -Filename => $data_db_filename, -Flags => DB_CREATE ) or die "Cannot open ${data_db_filename}: $!";`
297
298
299			`my $key;`
300			`my $value;`
301
302
303			`my @configs = ();`
304
305
306			`my $cursor = $data_db ->db_cursor() ;`
307			`while ($cursor->c_get($key, $value, DB_NEXT) == 0)`
308			`{`
309
310
311			`$_ = $key;`
312			`if(/parameter_root__(\S+)/)`
313			`{`
314			`# print "$key $value \n";`
315			`push @configs,"${1}--${value}:::";`
316			`}`
317
318			`}`
319
320			`my $status = $cursor->c_close() ;`
321
322			`$data_db -> db_close();`
323
324			`@configs = sys::lib::trim_sort(@configs);`
325
326			`my $config_n;`
327
328			`foreach my $config (@configs)`
329			`{`
330			`$config_n = "${config}${config_n}";`
331			`}`
332
333			`my $new_value;`
334			`$config_n="CONFIG___${config_n}";`
335			`$design_db->db_get($config_n, $new_value );`
336			`$config_n=$new_value;`
337
338
339
340			`my $outfile ="${home}${work_site}/${vendor}__${library}${sim_library_path}/icarus/${simulation}/TestBench";`
341			`open SIM_PARM_FILE,">$outfile" or die "unable to open $outfile";`
342
343			`my %local_parameters = %default_parameters;`
344			`my @local_order = @parameter_order;`
345
346
347
348			`foreach my $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:testbenches/socgen:testbench[socgen:variant/text() = '$variant']/./socgen:parameters/socgen:parameter/socgen:name"))`
349			`{`
350			`my($par_name) = $i_name ->findnodes('./text()')->to_literal ;`
351			`my($par_value) = $i_name ->findnodes('../socgen:value/text()')->to_literal ;`
352			`if ( $local_parameters{$par_name} eq '' ) { push @local_order , $par_name; }`
353			`$local_parameters{$par_name} = $par_value;`
354			`}`
355
356
357
358			`foreach my $i_name ($socgen_file->findnodes("//socgen:configurations/socgen:configuration[socgen:name/text() = '$configuration']/./socgen:parameters/socgen:parameter/socgen:name"))`
359			`{`
360			`my($par_name) = $i_name ->findnodes('./text()')->to_literal ;`
361			`my($par_value) = $i_name ->findnodes('../socgen:value/text()')->to_literal ;`
362			`if($local_parameters{$par_name} eq '' ) { push @local_order , $par_name; }`
363			`$local_parameters{$par_name} = $par_value;`
364			`}`
365
366
367
368			`foreach my $i_name ($socgen_file->findnodes("//socgen:componentConfiguration/socgen:sim/socgen:icarus/socgen:test[socgen:name/text() = '$simulation']/./socgen:parameters/socgen:parameter/socgen:name"))`
369			`{`
370			`my($par_name) = $i_name ->findnodes('./text()')->to_literal ;`
371			`my($par_value) = $i_name ->findnodes('../socgen:value/text()')->to_literal ;`
372			`if ( $local_parameters{$par_name} eq '' ) { push @local_order , $par_name; }`
373			`$local_parameters{$par_name} = $par_value;`
374			`}`
375
376
377
378
379
380
381
382
383
384			`print SIM_PARM_FILE "// Testbench for $library $component $variant $configuration $simulation\n";`
385			print SIM_PARM_FILE "`ifndef TIMESCALE \n";
386			print SIM_PARM_FILE "`define TIMESCALE 1ns/1ns \n";
387			print SIM_PARM_FILE "`endif \n";
388			`print SIM_PARM_FILE " \n";`
389			print SIM_PARM_FILE "`ifndef TIMEFORMAT \n";
390			print SIM_PARM_FILE "`define TIMEFORMAT \$timeformat(-6, 2, \" us\", 14); \n";
391			print SIM_PARM_FILE "`endif \n";
392			`print SIM_PARM_FILE " \n";`
393			print SIM_PARM_FILE "`timescale `TIMESCALE \n";
394			`print SIM_PARM_FILE " \n";`
395			`print SIM_PARM_FILE "module TB(); \n";`
396			`print SIM_PARM_FILE " \n";`
397			`print SIM_PARM_FILE "initial \n";`
398			`print SIM_PARM_FILE "begin \n";`
399			print SIM_PARM_FILE "`TIMEFORMAT \n";
400			`print SIM_PARM_FILE "end \n";`
401			`print SIM_PARM_FILE " \n";`
402			print SIM_PARM_FILE "`ifdef VCD \n";
403			`print SIM_PARM_FILE "initial \n";`
404			`print SIM_PARM_FILE " begin \n";`
405			print SIM_PARM_FILE "`include \"./dmp_define\" \n";
406			`print SIM_PARM_FILE " end \n";`
407			print SIM_PARM_FILE "`endif \n";
408			`print SIM_PARM_FILE " reg clk,START; \n";`
409			`print SIM_PARM_FILE " wire FAIL,FINISH; \n";`
410			`print SIM_PARM_FILE " reg failed; \n";`
411			`print SIM_PARM_FILE " reg [31:0] failcount; \n";`
412			`print SIM_PARM_FILE "initial \n";`
413			`print SIM_PARM_FILE "begin \n";`
414			`print SIM_PARM_FILE "clk=0; \n";`
415			`print SIM_PARM_FILE "START=0; \n";`
416			`print SIM_PARM_FILE "@ (posedge clk); \n";`
417			`print SIM_PARM_FILE "@ (posedge clk); \n";`
418			`print SIM_PARM_FILE "@ (posedge clk) ; \n";`
419			`print SIM_PARM_FILE "START = 1; \n";`
420			`print SIM_PARM_FILE "end \n";`
421			`print SIM_PARM_FILE "always@(posedge clk) \n";`
422			`print SIM_PARM_FILE "if(START && FINISH) \n";`
423			`print SIM_PARM_FILE "begin \n";`
424			`print SIM_PARM_FILE " if(failed) \n";`
425			`print SIM_PARM_FILE " begin \n";`
426			`print SIM_PARM_FILE " \$display(\"%t SIM over: ERROR %d failures\",\$realtime ,failcount ); \n";`
427			`print SIM_PARM_FILE " end \n";`
428			`print SIM_PARM_FILE " else \n";`
429			`print SIM_PARM_FILE " begin \n";`
430			`print SIM_PARM_FILE " \$display(\"%t SIM over: PASSED\",\$realtime ); \n";`
431			`print SIM_PARM_FILE " end // else: !if(failed) \n";`
432			`print SIM_PARM_FILE "\$dumpflush; \n";`
433			`print SIM_PARM_FILE "\$finish; \n";`
434			`print SIM_PARM_FILE "end \n";`
435			`print SIM_PARM_FILE "always@(posedge clk or negedge START) \n";`
436			`print SIM_PARM_FILE "if(!START) \n";`
437			`print SIM_PARM_FILE "begin \n";`
438			`print SIM_PARM_FILE "failed <= 1\'b0; \n";`
439			`print SIM_PARM_FILE "failcount <= 32\'h0; \n";`
440			`print SIM_PARM_FILE "end \n";`
441			`print SIM_PARM_FILE "else \n";`
442			`print SIM_PARM_FILE "begin \n";`
443			`print SIM_PARM_FILE "if(FAIL) \n";`
444			`print SIM_PARM_FILE "begin \n";`
445			`print SIM_PARM_FILE "failed <= 1\'b1; \n";`
446			`print SIM_PARM_FILE "failcount <= failcount + 32\'h00000001; \n";`
447			`print SIM_PARM_FILE "end \n";`
448			`print SIM_PARM_FILE "else \n";`
449			`print SIM_PARM_FILE "begin \n";`
450			`print SIM_PARM_FILE "failed <= failed; \n";`
451			`print SIM_PARM_FILE "failcount <= failcount; \n";`
452			`print SIM_PARM_FILE "end \n";`
453			`print SIM_PARM_FILE "end \n";`
454
455			`print SIM_PARM_FILE "always \n";`
456			`print SIM_PARM_FILE " #($local_parameters{\"PERIOD\"}/2) clk = !clk; \n";`
457			print SIM_PARM_FILE "`include \"./test_define\" \n";
458
459
460
461			`print SIM_PARM_FILE " ${module_name}_${config_n} \n";`
462
463			`print SIM_PARM_FILE " test \n (.clk(clk),.START(START),.FAIL(FAIL),.FINISH(FINISH)); \n\n\n\n";`
464			`print SIM_PARM_FILE "task automatic next; \n";`
465			`print SIM_PARM_FILE " input [31:0] num; \n";`
466			`print SIM_PARM_FILE " repeat (num) @ (posedge clk); \n";`
467			`print SIM_PARM_FILE "endtask \n";`
468			`print SIM_PARM_FILE " \n";`
469			`print SIM_PARM_FILE " \n";`
470			`print SIM_PARM_FILE "initial \n";`
471			`print SIM_PARM_FILE " begin \n";`
472			`print SIM_PARM_FILE " next($local_parameters{\"TIMEOUT\"}); \n";`
473			`print SIM_PARM_FILE " \$display(\"%t Sim over :ERROR TIMEOUT\",\$realtime ); \n";`
474			`print SIM_PARM_FILE " @ (posedge clk) \n";`
475			`print SIM_PARM_FILE " \$dumpflush; \n";`
476			`print SIM_PARM_FILE " \$finish; \n";`
477			`print SIM_PARM_FILE " end \n";`
478			`print SIM_PARM_FILE " \n";`
479
480
481
482
483
484
485			`print SIM_PARM_FILE "endmodule \n";`
486
487
488
489
490
491			`}`
492
493
494
495
496
497