OpenCores
URL https://opencores.org/ocsvn/sparc64soc/sparc64soc/trunk

Subversion Repositories sparc64soc

[/] [sparc64soc/] [trunk/] [OC-Ethernet/] [eth_transmitcontrol.v] - Blame information for rev 2

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 2 dmitryr
//////////////////////////////////////////////////////////////////////
2
////                                                              ////
3
////  eth_transmitcontrol.v                                       ////
4
////                                                              ////
5
////  This file is part of the Ethernet IP core project           ////
6
////  http://www.opencores.org/projects/ethmac/                   ////
7
////                                                              ////
8
////  Author(s):                                                  ////
9
////      - Igor Mohor (igorM@opencores.org)                      ////
10
////                                                              ////
11
////  All additional information is avaliable in the Readme.txt   ////
12
////  file.                                                       ////
13
////                                                              ////
14
//////////////////////////////////////////////////////////////////////
15
////                                                              ////
16
//// Copyright (C) 2001 Authors                                   ////
17
////                                                              ////
18
//// This source file may be used and distributed without         ////
19
//// restriction provided that this copyright statement is not    ////
20
//// removed from the file and that any derivative work contains  ////
21
//// the original copyright notice and the associated disclaimer. ////
22
////                                                              ////
23
//// This source file is free software; you can redistribute it   ////
24
//// and/or modify it under the terms of the GNU Lesser General   ////
25
//// Public License as published by the Free Software Foundation; ////
26
//// either version 2.1 of the License, or (at your option) any   ////
27
//// later version.                                               ////
28
////                                                              ////
29
//// This source is distributed in the hope that it will be       ////
30
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
31
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
32
//// PURPOSE.  See the GNU Lesser General Public License for more ////
33
//// details.                                                     ////
34
////                                                              ////
35
//// You should have received a copy of the GNU Lesser General    ////
36
//// Public License along with this source; if not, download it   ////
37
//// from http://www.opencores.org/lgpl.shtml                     ////
38
////                                                              ////
39
//////////////////////////////////////////////////////////////////////
40
//
41
// CVS Revision History
42
//
43
// $Log: not supported by cvs2svn $
44
// Revision 1.5  2002/11/19 17:37:32  mohor
45
// When control frame (PAUSE) was sent, status was written in the
46
// eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
47
// Only TXC interrupt is set.
48
//
49
// Revision 1.4  2002/01/23 10:28:16  mohor
50
// Link in the header changed.
51
//
52
// Revision 1.3  2001/10/19 08:43:51  mohor
53
// eth_timescale.v changed to timescale.v This is done because of the
54
// simulation of the few cores in a one joined project.
55
//
56
// Revision 1.2  2001/09/11 14:17:00  mohor
57
// Few little NCSIM warnings fixed.
58
//
59
// Revision 1.1  2001/08/06 14:44:29  mohor
60
// A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
61
// Include files fixed to contain no path.
62
// File names and module names changed ta have a eth_ prologue in the name.
63
// File eth_timescale.v is used to define timescale
64
// All pin names on the top module are changed to contain _I, _O or _OE at the end.
65
// Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
66
// and Mdo_OE. The bidirectional signal must be created on the top level. This
67
// is done due to the ASIC tools.
68
//
69
// Revision 1.1  2001/07/30 21:23:42  mohor
70
// Directory structure changed. Files checked and joind together.
71
//
72
// Revision 1.1  2001/07/03 12:51:54  mohor
73
// Initial release of the MAC Control module.
74
//
75
//
76
//
77
//
78
//
79
//
80
 
81
 
82
`include "timescale.v"
83
 
84
 
85
module eth_transmitcontrol (MTxClk, TxReset, TxUsedDataIn, TxUsedDataOut, TxDoneIn, TxAbortIn,
86
                            TxStartFrmIn, TPauseRq, TxUsedDataOutDetected, TxFlow, DlyCrcEn,
87
                            TxPauseTV, MAC, TxCtrlStartFrm, TxCtrlEndFrm, SendingCtrlFrm, CtrlMux,
88
                            ControlData, WillSendControlFrame, BlockTxDone
89
                           );
90
 
91
parameter Tp = 1;
92
 
93
 
94
input         MTxClk;
95
input         TxReset;
96
input         TxUsedDataIn;
97
input         TxUsedDataOut;
98
input         TxDoneIn;
99
input         TxAbortIn;
100
input         TxStartFrmIn;
101
input         TPauseRq;
102
input         TxUsedDataOutDetected;
103
input         TxFlow;
104
input         DlyCrcEn;
105
input  [15:0] TxPauseTV;
106
input  [47:0] MAC;
107
 
108
output        TxCtrlStartFrm;
109
output        TxCtrlEndFrm;
110
output        SendingCtrlFrm;
111
output        CtrlMux;
112
output [7:0]  ControlData;
113
output        WillSendControlFrame;
114
output        BlockTxDone;
115
 
116
reg           SendingCtrlFrm;
117
reg           CtrlMux;
118
reg           WillSendControlFrame;
119
reg    [3:0]  DlyCrcCnt;
120
reg    [5:0]  ByteCnt;
121
reg           ControlEnd_q;
122
reg    [7:0]  MuxedCtrlData;
123
reg           TxCtrlStartFrm;
124
reg           TxCtrlStartFrm_q;
125
reg           TxCtrlEndFrm;
126
reg    [7:0]  ControlData;
127
reg           TxUsedDataIn_q;
128
reg           BlockTxDone;
129
 
130
wire          IncrementDlyCrcCnt;
131
wire          ResetByteCnt;
132
wire          IncrementByteCnt;
133
wire          ControlEnd;
134
wire          IncrementByteCntBy2;
135
wire          EnableCnt;
136
 
137
 
138
// A command for Sending the control frame is active (latched)
139
always @ (posedge MTxClk or posedge TxReset)
140
begin
141
  if(TxReset)
142
    WillSendControlFrame <= #Tp 1'b0;
143
  else
144
  if(TxCtrlEndFrm & CtrlMux)
145
    WillSendControlFrame <= #Tp 1'b0;
146
  else
147
  if(TPauseRq & TxFlow)
148
    WillSendControlFrame <= #Tp 1'b1;
149
end
150
 
151
 
152
// Generation of the transmit control packet start frame
153
always @ (posedge MTxClk or posedge TxReset)
154
begin
155
  if(TxReset)
156
    TxCtrlStartFrm <= #Tp 1'b0;
157
  else
158
  if(TxUsedDataIn_q & CtrlMux)
159
    TxCtrlStartFrm <= #Tp 1'b0;
160
  else
161
  if(WillSendControlFrame & ~TxUsedDataOut & (TxDoneIn | TxAbortIn | TxStartFrmIn | (~TxUsedDataOutDetected)))
162
    TxCtrlStartFrm <= #Tp 1'b1;
163
end
164
 
165
 
166
 
167
// Generation of the transmit control packet end frame
168
always @ (posedge MTxClk or posedge TxReset)
169
begin
170
  if(TxReset)
171
    TxCtrlEndFrm <= #Tp 1'b0;
172
  else
173
  if(ControlEnd | ControlEnd_q)
174
    TxCtrlEndFrm <= #Tp 1'b1;
175
  else
176
    TxCtrlEndFrm <= #Tp 1'b0;
177
end
178
 
179
 
180
// Generation of the multiplexer signal (controls muxes for switching between
181
// normal and control packets)
182
always @ (posedge MTxClk or posedge TxReset)
183
begin
184
  if(TxReset)
185
    CtrlMux <= #Tp 1'b0;
186
  else
187
  if(WillSendControlFrame & ~TxUsedDataOut)
188
    CtrlMux <= #Tp 1'b1;
189
  else
190
  if(TxDoneIn)
191
    CtrlMux <= #Tp 1'b0;
192
end
193
 
194
 
195
 
196
// Generation of the Sending Control Frame signal (enables padding and CRC)
197
always @ (posedge MTxClk or posedge TxReset)
198
begin
199
  if(TxReset)
200
    SendingCtrlFrm <= #Tp 1'b0;
201
  else
202
  if(WillSendControlFrame & TxCtrlStartFrm)
203
    SendingCtrlFrm <= #Tp 1'b1;
204
  else
205
  if(TxDoneIn)
206
    SendingCtrlFrm <= #Tp 1'b0;
207
end
208
 
209
 
210
always @ (posedge MTxClk or posedge TxReset)
211
begin
212
  if(TxReset)
213
    TxUsedDataIn_q <= #Tp 1'b0;
214
  else
215
    TxUsedDataIn_q <= #Tp TxUsedDataIn;
216
end
217
 
218
 
219
 
220
// Generation of the signal that will block sending the Done signal to the eth_wishbone module
221
// While sending the control frame
222
always @ (posedge MTxClk or posedge TxReset)
223
begin
224
  if(TxReset)
225
    BlockTxDone <= #Tp 1'b0;
226
  else
227
  if(TxCtrlStartFrm)
228
    BlockTxDone <= #Tp 1'b1;
229
  else
230
  if(TxStartFrmIn)
231
    BlockTxDone <= #Tp 1'b0;
232
end
233
 
234
 
235
always @ (posedge MTxClk)
236
begin
237
  ControlEnd_q     <= #Tp ControlEnd;
238
  TxCtrlStartFrm_q <= #Tp TxCtrlStartFrm;
239
end
240
 
241
 
242
assign IncrementDlyCrcCnt = CtrlMux & TxUsedDataIn &  ~DlyCrcCnt[2];
243
 
244
 
245
// Delayed CRC counter
246
always @ (posedge MTxClk or posedge TxReset)
247
begin
248
  if(TxReset)
249
    DlyCrcCnt <= #Tp 4'h0;
250
  else
251
  if(ResetByteCnt)
252
    DlyCrcCnt <= #Tp 4'h0;
253
  else
254
  if(IncrementDlyCrcCnt)
255
    DlyCrcCnt <= #Tp DlyCrcCnt + 1'b1;
256
end
257
 
258
 
259
assign ResetByteCnt = TxReset | (~TxCtrlStartFrm & (TxDoneIn | TxAbortIn));
260
assign IncrementByteCnt = CtrlMux & (TxCtrlStartFrm & ~TxCtrlStartFrm_q & ~TxUsedDataIn | TxUsedDataIn & ~ControlEnd);
261
assign IncrementByteCntBy2 = CtrlMux & TxCtrlStartFrm & (~TxCtrlStartFrm_q) & TxUsedDataIn;     // When TxUsedDataIn and CtrlMux are set at the same time
262
 
263
assign EnableCnt = (~DlyCrcEn | DlyCrcEn & (&DlyCrcCnt[1:0]));
264
// Byte counter
265
always @ (posedge MTxClk or posedge TxReset)
266
begin
267
  if(TxReset)
268
    ByteCnt <= #Tp 6'h0;
269
  else
270
  if(ResetByteCnt)
271
    ByteCnt <= #Tp 6'h0;
272
  else
273
  if(IncrementByteCntBy2 & EnableCnt)
274
    ByteCnt <= #Tp (ByteCnt[5:0] ) + 2'h2;
275
  else
276
  if(IncrementByteCnt & EnableCnt)
277
    ByteCnt <= #Tp (ByteCnt[5:0] ) + 1'b1;
278
end
279
 
280
 
281
assign ControlEnd = ByteCnt[5:0] == 6'h22;
282
 
283
 
284
// Control data generation (goes to the TxEthMAC module)
285
always @ (ByteCnt or DlyCrcEn or MAC or TxPauseTV or DlyCrcCnt)
286
begin
287
  case(ByteCnt)
288
    6'h0:    if(~DlyCrcEn | DlyCrcEn & (&DlyCrcCnt[1:0]))
289
               MuxedCtrlData[7:0] = 8'h01;                   // Reserved Multicast Address
290
             else
291
                                                         MuxedCtrlData[7:0] = 8'h0;
292
    6'h2:      MuxedCtrlData[7:0] = 8'h80;
293
    6'h4:      MuxedCtrlData[7:0] = 8'hC2;
294
    6'h6:      MuxedCtrlData[7:0] = 8'h00;
295
    6'h8:      MuxedCtrlData[7:0] = 8'h00;
296
    6'hA:      MuxedCtrlData[7:0] = 8'h01;
297
    6'hC:      MuxedCtrlData[7:0] = MAC[47:40];
298
    6'hE:      MuxedCtrlData[7:0] = MAC[39:32];
299
    6'h10:     MuxedCtrlData[7:0] = MAC[31:24];
300
    6'h12:     MuxedCtrlData[7:0] = MAC[23:16];
301
    6'h14:     MuxedCtrlData[7:0] = MAC[15:8];
302
    6'h16:     MuxedCtrlData[7:0] = MAC[7:0];
303
    6'h18:     MuxedCtrlData[7:0] = 8'h88;                   // Type/Length
304
    6'h1A:     MuxedCtrlData[7:0] = 8'h08;
305
    6'h1C:     MuxedCtrlData[7:0] = 8'h00;                   // Opcode
306
    6'h1E:     MuxedCtrlData[7:0] = 8'h01;
307
    6'h20:     MuxedCtrlData[7:0] = TxPauseTV[15:8];         // Pause timer value
308
    6'h22:     MuxedCtrlData[7:0] = TxPauseTV[7:0];
309
    default:   MuxedCtrlData[7:0] = 8'h0;
310
  endcase
311
end
312
 
313
 
314
// Latched Control data
315
always @ (posedge MTxClk or posedge TxReset)
316
begin
317
  if(TxReset)
318
    ControlData[7:0] <= #Tp 8'h0;
319
  else
320
  if(~ByteCnt[0])
321
    ControlData[7:0] <= #Tp MuxedCtrlData[7:0];
322
end
323
 
324
 
325
 
326
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.