Subversion Repositories sparc64soc

// ========== Copyright Header Begin ==========================================

// 

// OpenSPARC T1 Processor File: ucb_flow_jbi.v

// Copyright (c) 2006 Sun Microsystems, Inc.  All Rights Reserved.

// DO NOT ALTER OR REMOVE COPYRIGHT NOTICES.

// 

// The above named program is free software; you can redistribute it and/or

// modify it under the terms of the GNU General Public

// License version 2 as published by the Free Software Foundation.

// 

// The above named program is distributed in the hope that it will be 

// useful, but WITHOUT ANY WARRANTY; without even the implied warranty of

// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

// General Public License for more details.

// 

// You should have received a copy of the GNU General Public

// License along with this work; if not, write to the Free Software

// Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.

// 

// ========== Copyright Header End ============================================

////////////////////////////////////////////////////////////////////////

/*

//  Module Name:        ucb_flow_jbi

//      Description:    Unit Control Block

//                      - supports 1B/2B/4B/8B/16B read with flow control

//                      - supports 1B/2B/4B/8B write with flow control

//                      - does NOT support ifill request

//                      - supports interrupt return to IO Bridge

//                      - provides 1+2 deep buffer for incoming requests

//                        from the IO Bridge

//                      - provides single buffer for returns going back

//                        to the IO Bridge

//

//                      This module is customized for the JBI.

//

//                      Data bus width to and from the IO Bridge is

//                      configured through parameters UCB_IOB_WIDTH and

//                      IOB_UCB_WIDTH.  Supported widths are:

//

//                      IOB_UCB_WIDTH  UCB_IOB_WIDTH

//                      ----------------------------

//                      32             8

//                      16             8

//                       8             8

//                       4             4

 */

////////////////////////////////////////////////////////////////////////

// Global header file includes

////////////////////////////////////////////////////////////////////////

`include        "sys.h" // system level definition file which 

                        // contains the time scale definition

`include        "iop.h"

////////////////////////////////////////////////////////////////////////

// Local header file includes / local defines

////////////////////////////////////////////////////////////////////////

`define         UCB_BUF_DEPTH   2

`define         UCB_BUF_WIDTH   64+(`UCB_ADDR_HI-`UCB_ADDR_LO+1)+(`UCB_SIZE_HI-`UCB_SIZE_LO+1)+(`UCB_BUF_HI-`UCB_BUF_LO+1)+(`UCB_THR_HI-`UCB_THR_LO+1)+1+1

module ucb_flow_jbi (/*AUTOARG*/

   // Outputs

   ucb_iob_stall, rd_req_vld, wr_req_vld, thr_id_in, buf_id_in,

   size_in, addr_in, data_in, ack_busy, int_busy, ucb_iob_vld,

   ucb_iob_data,

   // Inputs

   clk, rst_l, iob_ucb_vld, iob_ucb_data, req_acpted, rd_ack_vld,

   rd_nack_vld, thr_id_out, buf_id_out, data128, data_out, int_vld,

   int_typ, int_thr_id, dev_id, int_stat, int_vec, iob_ucb_stall

   );

   // synopsys template

   parameter IOB_UCB_WIDTH = 32;  // data bus width from IOB to UCB

   parameter UCB_IOB_WIDTH = 8;   // data bus width from UCB to IOB

   parameter REG_WIDTH     = 128;  // please do not change this parameter

   // Globals

   input                                clk;

   input                                rst_l;

   // Request from IO Bridge

   input                                iob_ucb_vld;

   input [IOB_UCB_WIDTH-1:0]             iob_ucb_data;

   output                               ucb_iob_stall;

   // Request to local unit

   output                               rd_req_vld;

   output                               wr_req_vld;

   output [`UCB_THR_HI-`UCB_THR_LO:0]   thr_id_in;

   output [`UCB_BUF_HI-`UCB_BUF_LO:0]   buf_id_in;

   output [`UCB_SIZE_HI-`UCB_SIZE_LO:0] size_in;   // only pertinent to JBI and SPI

   output [`UCB_ADDR_HI-`UCB_ADDR_LO:0] addr_in;

   output [`UCB_DATA_HI-`UCB_DATA_LO:0] data_in;

   input                                req_acpted;

   // Ack/Nack from local unit

   input                                rd_ack_vld;

   input                                rd_nack_vld;

   input [`UCB_THR_HI-`UCB_THR_LO:0]     thr_id_out;

   input [`UCB_BUF_HI-`UCB_BUF_LO:0]     buf_id_out;

   input                                data128;   // set to 1 if data returned is 128 bit

   input [REG_WIDTH-1:0]                 data_out;

   output                               ack_busy;

   // Interrupt from local unit

   input                                int_vld;

   input [`UCB_PKT_HI-`UCB_PKT_LO:0]     int_typ;          // interrupt type

   input [`UCB_THR_HI-`UCB_THR_LO:0]     int_thr_id;       // interrupt thread ID

   input [`UCB_INT_DEV_HI-`UCB_INT_DEV_LO:0] dev_id;      // interrupt device ID

   input [`UCB_INT_STAT_HI-`UCB_INT_STAT_LO:0] int_stat;  // interrupt status

   input [`UCB_INT_VEC_HI-`UCB_INT_VEC_LO:0]   int_vec;   // interrupt vector

   output                               int_busy;

   // Output to IO Bridge

   output                               ucb_iob_vld;

   output [UCB_IOB_WIDTH-1:0]            ucb_iob_data;

   input                                iob_ucb_stall;

   // Local signals

   wire                                 indata_buf_vld;

   wire [127:0]                         indata_buf;

   wire                                 ucb_iob_stall_a1;

   wire                                 read_pending;

   wire                                 write_pending;

   wire                                 rd_buf;

   wire [`UCB_BUF_DEPTH-1:0]             buf_head_next;

   wire [`UCB_BUF_DEPTH-1:0]             buf_head;

   wire                                 wr_buf;

   wire [`UCB_BUF_DEPTH-1:0]             buf_tail_next;

   wire [`UCB_BUF_DEPTH-1:0]             buf_tail;

   wire                                 buf_full_next;

   wire                                 buf_full;

   wire                                 buf_empty_next;

   wire                                 buf_empty;

   wire [`UCB_BUF_WIDTH-1:0]             req_in;

   wire                                 buf0_en;

   wire [`UCB_BUF_WIDTH-1:0]             buf0;

   wire                                 buf1_en;

   wire [`UCB_BUF_WIDTH-1:0]             buf1;

   wire [`UCB_BUF_WIDTH-1:0]             req_out;

   wire                                 rd_req_vld_nq;

   wire                                 wr_req_vld_nq;

   wire                                 ack_buf_rd;

   wire                                 ack_buf_wr;

   wire                                 ack_buf_vld;

   wire                                 ack_buf_vld_next;

   wire                                 ack_buf_is_nack;

   wire                                 ack_buf_is_data128;

   wire [`UCB_PKT_HI-`UCB_PKT_LO:0]     ack_typ_out;

   wire [REG_WIDTH+`UCB_BUF_HI-`UCB_PKT_LO:0] ack_buf_in;

   wire [REG_WIDTH+`UCB_BUF_HI-`UCB_PKT_LO:0] ack_buf;

   wire [(REG_WIDTH+64)/UCB_IOB_WIDTH-1:0] ack_buf_vec;

   wire                                 int_buf_rd;

   wire                                 int_buf_wr;

   wire                                 int_buf_vld;

   wire                                 int_buf_vld_next;

   wire [`UCB_INT_VEC_HI-`UCB_PKT_LO:0] int_buf_in;

   wire [`UCB_INT_VEC_HI-`UCB_PKT_LO:0] int_buf;

   wire [(REG_WIDTH+64)/UCB_IOB_WIDTH-1:0] int_buf_vec;

   wire                                 int_last_rd;

   wire                                 outdata_buf_busy;

   wire                                 outdata_buf_wr;

   wire [REG_WIDTH+63:0]                outdata_buf_in;

   wire [(REG_WIDTH+64)/UCB_IOB_WIDTH-1:0] outdata_vec_in;

////////////////////////////////////////////////////////////////////////

// Code starts here

////////////////////////////////////////////////////////////////////////

   /************************************************************

    * Inbound Data

    ************************************************************/

   // Register size is hardcoded to 64 bits here

   ucb_bus_in #(IOB_UCB_WIDTH,64) ucb_bus_in (.rst_l(rst_l),

                                              .clk(clk),

                                              .vld(iob_ucb_vld),

                                              .data(iob_ucb_data),

                                              .stall(ucb_iob_stall),

                                              .indata_buf_vld(indata_buf_vld),

                                              .indata_buf(indata_buf),

                                              .stall_a1(ucb_iob_stall_a1));

   /************************************************************

    * Decode inbound packet type

    ************************************************************/

   assign        read_pending = (indata_buf[`UCB_PKT_HI:`UCB_PKT_LO] ==

                                 `UCB_READ_REQ) &

                                indata_buf_vld;

   assign        write_pending = (indata_buf[`UCB_PKT_HI:`UCB_PKT_LO] ==

                                  `UCB_WRITE_REQ) &

                                  indata_buf_vld;

   assign        ucb_iob_stall_a1 = (read_pending | write_pending) & buf_full;

   /************************************************************

    * Inbound buffer

    ************************************************************/

   // Head pointer

   assign        rd_buf = req_acpted;

   assign        buf_head_next = ~rst_l ? `UCB_BUF_DEPTH'b01 :

                                 rd_buf ? {buf_head[`UCB_BUF_DEPTH-2:0],

                                           buf_head[`UCB_BUF_DEPTH-1]} :

                                          buf_head;

   dff_ns #(`UCB_BUF_DEPTH) buf_head_ff (.din(buf_head_next),

                                         .clk(clk),

                                         .q(buf_head));

   // Tail pointer

   assign        wr_buf = (read_pending |

                           write_pending) &

                          ~buf_full;

   assign        buf_tail_next = ~rst_l ? `UCB_BUF_DEPTH'b01 :

                                 wr_buf ? {buf_tail[`UCB_BUF_DEPTH-2:0],

                                           buf_tail[`UCB_BUF_DEPTH-1]} :

                                          buf_tail;

   dff_ns #(`UCB_BUF_DEPTH) buf_tail_ff (.din(buf_tail_next),

                                         .clk(clk),

                                         .q(buf_tail));

   // Buffer full

   assign        buf_full_next = (buf_head_next == buf_tail_next) &

                                 wr_buf;

   dffrle_ns #(1) buf_full_ff (.din(buf_full_next),

                               .rst_l(rst_l),

                               .en(rd_buf|wr_buf),

                               .clk(clk),

                               .q(buf_full));

   // Buffer empty

   assign        buf_empty_next = ((buf_head_next == buf_tail_next) &

                                   rd_buf) | ~rst_l;

   dffe_ns #(1) buf_empty_ff (.din(buf_empty_next),

                              .en(rd_buf|wr_buf|~rst_l),

                              .clk(clk),

                              .q(buf_empty));

   assign        req_in = {indata_buf[`UCB_DATA_HI:`UCB_DATA_LO],

                           indata_buf[`UCB_ADDR_HI:`UCB_ADDR_LO],

                           indata_buf[`UCB_SIZE_HI:`UCB_SIZE_LO],

                           indata_buf[`UCB_BUF_HI:`UCB_BUF_LO],

                           indata_buf[`UCB_THR_HI:`UCB_THR_LO],

                           write_pending,

                           read_pending};

   // Buffer 0

   assign        buf0_en = buf_tail[0] & wr_buf;

   dffe_ns #(`UCB_BUF_WIDTH) buf0_ff (.din(req_in),

                                      .en(buf0_en),

                                      .clk(clk),

                                      .q(buf0));

   // Buffer 1

   assign        buf1_en = buf_tail[1] & wr_buf;

   dffe_ns #(`UCB_BUF_WIDTH) buf1_ff (.din(req_in),

                                      .en(buf1_en),

                                      .clk(clk),

                                      .q(buf1));

   assign        req_out = buf_head[0] ? buf0 :

                           buf_head[1] ? buf1 :

                                         {`UCB_BUF_WIDTH{1'b0}};

   /************************************************************

    * Inbound interface to local unit

    ************************************************************/

   assign        {data_in,

                  addr_in,

                  size_in,

                  buf_id_in,

                  thr_id_in,

                  wr_req_vld_nq,

                  rd_req_vld_nq} = req_out;

   assign        rd_req_vld = rd_req_vld_nq & ~buf_empty;

   assign        wr_req_vld = wr_req_vld_nq & ~buf_empty;

   /************************************************************

    * Outbound Ack/Nack

    ************************************************************/

   assign        ack_buf_wr = rd_ack_vld | rd_nack_vld;

   assign        ack_buf_vld_next = ack_buf_wr ? 1'b1 :

                                    ack_buf_rd ? 1'b0 :

                                                 ack_buf_vld;

   dffrl_ns #(1) ack_buf_vld_ff (.din(ack_buf_vld_next),

                                 .clk(clk),

                                 .rst_l(rst_l),

                                 .q(ack_buf_vld));

   dffe_ns #(1) ack_buf_is_nack_ff (.din(rd_nack_vld),

                                    .en(ack_buf_wr),

                                    .clk(clk),

                                    .q(ack_buf_is_nack));

   dffe_ns #(1) ack_buf_is_data128_ff (.din(data128),

                                       .en(ack_buf_wr),

                                       .clk(clk),

                                       .q(ack_buf_is_data128));

   assign        ack_typ_out = rd_ack_vld ? `UCB_READ_ACK:

                                            `UCB_READ_NACK;

   assign        ack_buf_in = {data_out,

                               buf_id_out,

                               thr_id_out,

                               ack_typ_out};

   dffe_ns #(REG_WIDTH+`UCB_BUF_HI-`UCB_PKT_LO+1) ack_buf_ff (.din(ack_buf_in),

                                                              .en(ack_buf_wr),

                                                              .clk(clk),

                                                              .q(ack_buf));

   assign        ack_buf_vec = ack_buf_is_nack    ? {{REG_WIDTH/UCB_IOB_WIDTH{1'b0}},

                                                     {64/UCB_IOB_WIDTH{1'b1}}} :

                               ack_buf_is_data128 ? {(REG_WIDTH+64)/UCB_IOB_WIDTH{1'b1}} :

                                                    {(64+64)/UCB_IOB_WIDTH{1'b1}};

   assign        ack_busy = ack_buf_vld;

   /************************************************************

    * Outbound Interrupt

    ************************************************************/

   // Assertion: int_buf_wr shoudn't be asserted if int_buf_busy

   assign        int_buf_wr = int_vld;

   assign        int_buf_vld_next = int_buf_wr ? 1'b1 :

                                    int_buf_rd ? 1'b0 :

                                                 int_buf_vld;

   dffrl_ns #(1) int_buf_vld_ff (.din(int_buf_vld_next),

                                 .clk(clk),

                                 .rst_l(rst_l),

                                 .q(int_buf_vld));

   assign        int_buf_in = {int_vec,

                               int_stat,

                               dev_id,

                               int_thr_id,

                               int_typ};

   dffe_ns #(`UCB_INT_VEC_HI-`UCB_PKT_LO+1) int_buf_ff (.din(int_buf_in),

                                                        .en(int_buf_wr),

                                                        .clk(clk),

                                                        .q(int_buf));

   assign        int_buf_vec = {{REG_WIDTH/UCB_IOB_WIDTH{1'b0}},

                                {64/UCB_IOB_WIDTH{1'b1}}};

   assign        int_busy = int_buf_vld;

   /************************************************************

    * Outbound ack/interrupt Arbitration

    ************************************************************/

   dffrle_ns #(1) int_last_rd_ff (.din(int_buf_rd),

                                  .en(ack_buf_rd|int_buf_rd),

                                  .rst_l(rst_l),

                                  .clk(clk),

                                  .q(int_last_rd));

   assign        ack_buf_rd = ~outdata_buf_busy & ack_buf_vld &

                              (~int_buf_vld | int_last_rd);

   assign        int_buf_rd = ~outdata_buf_busy & int_buf_vld &

                              (~ack_buf_vld | ~int_last_rd);

   assign        outdata_buf_wr = ack_buf_rd | int_buf_rd;

   assign        outdata_buf_in = ack_buf_rd ? {ack_buf[REG_WIDTH+`UCB_BUF_HI:`UCB_BUF_HI+1],

                                                {(`UCB_RSV_HI-`UCB_RSV_LO+1){1'b0}},

                                                {(`UCB_ADDR_HI-`UCB_ADDR_LO+1){1'b0}},

                                                {(`UCB_SIZE_HI-`UCB_SIZE_LO+1){1'b0}},

                                                ack_buf[`UCB_BUF_HI:`UCB_BUF_LO],

                                                ack_buf[`UCB_THR_HI:`UCB_THR_LO],

                                                ack_buf[`UCB_PKT_HI:`UCB_PKT_LO]}:

                                               {{REG_WIDTH{1'b0}},

                                                {(`UCB_INT_RSV_HI-`UCB_INT_RSV_LO+1){1'b0}},

                                                int_buf[`UCB_INT_VEC_HI:`UCB_INT_VEC_LO],

                                                int_buf[`UCB_INT_STAT_HI:`UCB_INT_STAT_LO],

                                                int_buf[`UCB_INT_DEV_HI:`UCB_INT_DEV_LO],

                                                int_buf[`UCB_THR_HI:`UCB_THR_LO],

                                                int_buf[`UCB_PKT_HI:`UCB_PKT_LO]};

   assign        outdata_vec_in = ack_buf_rd ? ack_buf_vec :

                                               int_buf_vec;

   ucb_bus_out #(UCB_IOB_WIDTH, REG_WIDTH) ucb_bus_out (.rst_l(rst_l),

                                                        .clk(clk),

                                                        .outdata_buf_wr(outdata_buf_wr),

                                                        .outdata_buf_in(outdata_buf_in),

                                                        .outdata_vec_in(outdata_vec_in),

                                                        .outdata_buf_busy(outdata_buf_busy),

                                                        .vld(ucb_iob_vld),

                                                        .data(ucb_iob_data),

                                                        .stall(iob_ucb_stall));

`undef          UCB_BUF_WIDTH

endmodule // ucb_flow_jbi

// Local Variables:

// verilog-library-directories:(".")

// End: