URL https://opencores.org/ocsvn/spicxif/spicxif/trunk

Subversion Repositories spicxif

[/] [spicxif/] [trunk/] [Sim/] [tb_SPIxIF.v] - Blame information for rev 2

Details | Compare with Previous | View Log


///////////////////////////////////////////////////////////////////////////////
//
//  Copyright 2008-2013 by Michael A. Morris, dba M. A. Morris & Associates
//
//  All rights reserved. The source code contained herein is publicly released
//  under the terms and conditions of the GNU Lesser Public License. No part of
//  this source code may be reproduced or transmitted in any form or by any
//  means, electronic or mechanical, including photocopying, recording, or any
//  information storage and retrieval system in violation of the license under
//  which the source code is released.
//
//  The source code contained herein is free; it may be redistributed and/or 
//  modified in accordance with the terms of the GNU Lesser General Public
//  License as published by the Free Software Foundation; either version 2.1 of
//  the GNU Lesser General Public License, or any later version.
//
//  The source code contained herein is freely released WITHOUT ANY WARRANTY;
//  without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
//  PARTICULAR PURPOSE. (Refer to the GNU Lesser General Public License for
//  more details.)
//
//  A copy of the GNU Lesser General Public License should have been received
//  along with the source code contained herein; if not, a copy can be obtained
//  by writing to:
//
//  Free Software Foundation, Inc.
//  51 Franklin Street, Fifth Floor
//  Boston, MA  02110-1301 USA
//
//  Further, no use of this source code is permitted in any form or means
//  without inclusion of this banner prominently in any derived works. 
//
//  Michael A. Morris
//  Huntsville, AL
//
///////////////////////////////////////////////////////////////////////////////`timescale 1ns / 1ps
 
`timescale 1ns / 1ps
 
///////////////////////////////////////////////////////////////////////////////
// Company:         M. A. Morris & Associates
// Engineer:        Michael A. Morris
//
// Create Date:     07:30:59 03/18/2008
// Design Name:     SPIxIF.v
// Module Name:     tb_SPIx.v
// Project Name:    4020 HAWK ZAOM Upgrade, 0420-HAWKIF
// Target Device:   XC2S150-5PQ208I
// Tool versions:   ISE 8.2i
//  
// Description: Testbench for the modified SPIxIF.v module. 
//
//
// Verilog Test Fixture created by ISE for module: SPIxIF.v
//
// Dependencies:    None
// 
// Revision:
//
//  0.01    08C18   MAM     File Created
//
//  1.00    12I09   MAM     Modified to support updated SPIxIF.v module
//
// Additional Comments:
// 
///////////////////////////////////////////////////////////////////////////////
 
module tb_SPIxIF;
 
// Inputs
reg     Rst;
reg     Clk;
 
reg     LSB;
reg     [1:0] Mode;
reg     [2:0] Rate;
 
reg     DAV;
wire    FRE;
reg     [8:0] TD;
 
wire    FWE;
wire    [7:0] RD;
 
wire    SSEL;
wire    SCK;
wire    MOSI;
//wire    MISO;
 
integer i      = 0;
integer SS_Len = 0;
 
        // Instantiate the Unit Under Test (UUT)
 
SPIxIF  uut (
            .Rst(Rst),
            .Clk(Clk),
 
            .LSB(LSB),
            .Mode(Mode),
            .Rate(Rate),
 
            .DAV(DAV),
            .FRE(FRE),
            .TD(TD),
 
            .FWE(FWE),
            .RD(RD),
 
            .SS(SS),
            .SCK(SCK),
            .MOSI(MOSI),
            .MISO(MOSI)
        );
 
initial begin
    // Initialize Inputs
    Rst  = 1;
    Clk  = 0;
 
    LSB  = 0;
    Mode = 0;
    Rate = 0;
 
    DAV  = 0;
    TD   = 0;
 
    // Wait 100 ns for global reset to finish
 
    #101 Rst = 0;
 
    // Add stimulus here
 
    $display("Testing: MSB first, all four SPI modes, fastest SPI SCK rate\n");
 
    Mode = 0; Rate = 0; LSB = 0;
 
    $display("\tTest - Mode 0\n");
    #1;
    if(SCK != 0) begin
        $display("\t\tError: SCK did not idle low in Mode 0\n");
        $stop;
    end else begin
        $display("\t\tPass: SCK idled low in Mode 0\n");
    end
    @(posedge Clk) #1;
    DAV = 1; TD = 9'h1AB;
    @(posedge FRE) DAV = 0;
    #1;
    if(SCK != 0) begin
        $display("\t\tError: SCK did not start low in Mode 0\n");
        $stop;
    end else begin
        $display("\t\tPass: SCK started low in Mode 0\n");
    end
    @(negedge FWE) Mode = 1;
    #1;
    if(SCK != 0) begin
        $display("\t\tError: SCK did not idle low in Mode 0\n");
        $stop;
    end else begin
        $display("\t\tPass: SCK idled low in Mode 0\n");
    end
    if(RD != TD[7:0]) begin
        $display("\t\tError: RD not equal to TD\n");
        $stop;
    end else begin
        $display("\t\tPass: RD equal to TD\n");
    end
    if(SS_Len != 16) begin
        $display("\t\tError: SS Length != 16; SCK rate incorrect\n");
        $stop;
    end else begin
        $display("\t\tPass: SS Length == 16; SCK rate correct\n");
    end
 
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
 
    $display("\tTest - Mode 1\n");
    #1;
    if(SCK != 1) begin
        $display("\t\tError: SCK did not idle high in Mode 1\n");
        $stop;
    end else begin
        $display("\t\tPass: SCK idled high in Mode 1\n");
    end
    @(posedge Clk) #1;
    DAV = 1; TD = 9'h15A;
    @(posedge FRE) DAV = 0;
    #1;
    if(SCK != 1) begin
        $display("\t\tError: SCK did not start high in Mode 1\n");
        $stop;
    end else begin
        $display("\t\tPass: SCK started high in Mode 1\n");
    end
    @(negedge FWE) Mode = 2;
    if(SCK != 1) begin
        $display("\t\tError: SCK did not idle high in Mode 1\n");
        $stop;
    end else begin
        $display("\t\tPass: SCK idled high in Mode 1\n");
    end
    if(RD != TD[7:0]) begin
        $display("\t\tError: RD not equal to TD\n");
        $stop;
    end else begin
        $display("\t\tPass: RD equal to TD\n");
    end
    if(SS_Len != 16) begin
        $display("\t\tError: SS Length != 16; SCK rate incorrect\n");
        $stop;
    end else begin
        $display("\t\tPass: SS Length == 16; SCK rate correct\n");
    end
 
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
 
    $display("\tTest - Mode 2\n");
    #1;
    if(SCK != 0) begin
        $display("\t\tError: SCK did not idle low in Mode 2\n");
        $stop;
    end else begin
        $display("\t\tPass: SCK idled low in Mode 2\n");
    end
    @(posedge Clk) #1;
    DAV = 1; TD = 9'h1A5;
    @(posedge FRE) DAV = 0;
    #1;
    if(SCK != 1) begin
        $display("\t\tError: SCK did not start high in Mode 2\n");
        $stop;
    end else begin
        $display("\t\tPass: SCK started high in Mode 2\n");
    end
    @(negedge FWE) Mode = 3;
    if(SCK != 0) begin
        $display("\t\tError: SCK did not idle low in Mode 2\n");
        $stop;
    end else begin
        $display("\t\tPass: SCK idled low in Mode 2\n");
    end
    if(RD != TD[7:0]) begin
        $display("\t\tError: RD not equal to TD\n");
        $stop;
    end else begin
        $display("\t\tPass: RD equal to TD\n");
    end
    if(SS_Len != 16) begin
        $display("\t\tError: SS Length != 16; SCK rate incorrect\n");
        $stop;
    end else begin
        $display("\t\tPass: SS Length == 16; SCK rate correct\n");
    end
 
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
 
    $display("\tTest - Mode 3\n");
    #1;
    if(SCK != 1) begin
        $display("\t\tError: SCK did not idle high in Mode 3\n");
        $stop;
    end else begin
        $display("\t\tPass: SCK idled high in Mode 3\n");
    end
    @(posedge Clk) #1;
    DAV = 1; TD = 9'h169;
    @(posedge FRE) DAV = 0;
    #1;
    if(SCK != 0) begin
        $display("\t\tError: SCK did not start low in Mode 3\n");
        $stop;
    end else begin
        $display("\t\tPass: SCK started low in Mode 3\n");
    end
    @(negedge FWE) Mode = 0;
    if(SCK != 1) begin
        $display("\t\tError: SCK did not idle high in Mode 3\n");
        $stop;
    end else begin
        $display("\t\tPass: SCK idled high in Mode 3\n");
    end
    if(RD != TD[7:0]) begin
        $display("\t\tError: RD not equal to TD\n");
        $stop;
    end else begin
        $display("\t\tPass: RD equal to TD\n");
    end
    if(SS_Len != 16) begin
        $display("\t\tError: SS Length != 16; SCK rate incorrect\n");
        $stop;
    end else begin
        $display("\t\tPass: SS Length == 16; SCK rate correct\n");
    end
 
    $display("Testing multi-cycle transfer\n");
    @(posedge Clk) #1;
    DAV = 1;
    TD = 9'h002;
    @(negedge FRE);
    TD = 9'h000;
    @(negedge FRE);
    TD = 9'h0AA;
    @(negedge FRE);
    TD = 9'h055;
    @(negedge FRE);
    TD = 9'h000;
    DAV = 0;
    @(negedge SS) #1;
    if(SS_Len != 64) begin
        $display("\tError: SS Length != 64; Incorrect number of transfers\n");
        $stop;
    end else begin
        $display("\tPass: SS Length == 64; Correct number of transfers\n");
    end
 
    $display("Testing multi-cycle transfer with (Rate == 1)\n");
    Rate = 1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
 
    DAV = 1;
    TD = 9'h002;
    @(negedge FRE);
    TD = 9'h000;
    @(negedge FRE);
    TD = 9'h0AA;
    @(negedge FRE);
    TD = 9'h055;
    @(negedge FRE);
    TD = 9'h000;
    DAV = 0;
    @(negedge SS) #1;
    if(SS_Len != 128) begin
        $display("\tError: SS Length != 128; SS_Len = %d\n", SS_Len);
        $stop;
    end else begin
        $display("\tPass: SS Length == %d\n", SS_Len);
    end
 
    $display("Testing multi-cycle transfer with (Rate == 2)\n");
    Rate = 2;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
 
    DAV = 1;
    TD = 9'h002;
    @(negedge FRE);
    TD = 9'h000;
    @(negedge FRE);
    TD = 9'h0AA;
    @(negedge FRE);
    TD = 9'h055;
    @(negedge FRE);
    TD = 9'h000;
    DAV = 0;
    @(negedge SS) #1;
    if(SS_Len != 256) begin
        $display("\tError: SS Length != 256; SS_Len = %d\n", SS_Len);
        $stop;
    end else begin
        $display("\tPass: SS Length == %d\n", SS_Len);
    end
 
    $display("Testing multi-cycle transfer with (Rate == 3)\n");
    Rate = 3;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
 
    DAV = 1;
    TD = 9'h002;
    @(negedge FRE);
    TD = 9'h000;
    @(negedge FRE);
    TD = 9'h0AA;
    @(negedge FRE);
    TD = 9'h055;
    @(negedge FRE);
    TD = 9'h000;
    DAV = 0;
    @(negedge SS) #1;
    if(SS_Len != 512) begin
        $display("\tError: SS Length != 512; SS_Len = %d\n", SS_Len);
        $stop;
    end else begin
        $display("\tPass: SS Length == %d\n", SS_Len);
    end
 
    $display("Testing multi-cycle transfer with (Rate == 4)\n");
    Rate = 4;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
 
    DAV = 1;
    TD = 9'h002;
    @(negedge FRE);
    TD = 9'h000;
    @(negedge FRE);
    TD = 9'h0AA;
    @(negedge FRE);
    TD = 9'h055;
    @(negedge FRE);
    TD = 9'h000;
    DAV = 0;
    @(negedge SS) #1;
    if(SS_Len != 1024) begin
        $display("\tError: SS Length != 1024; SS_Len = %d\n", SS_Len);
        $stop;
    end else begin
        $display("\tPass: SS Length == %d\n", SS_Len);
    end
 
    $display("Testing multi-cycle transfer with (Rate == 5)\n");
    Rate = 5;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
 
    DAV = 1;
    TD = 9'h002;
    @(negedge FRE);
    TD = 9'h000;
    @(negedge FRE);
    TD = 9'h0AA;
    @(negedge FRE);
    TD = 9'h055;
    @(negedge FRE);
    TD = 9'h000;
    DAV = 0;
    @(negedge SS) #1;
    if(SS_Len != 2048) begin
        $display("\tError: SS Length != 2048; SS_Len = %d\n", SS_Len);
        $stop;
    end else begin
        $display("\tPass: SS Length == %d\n", SS_Len);
    end
 
    $display("Testing multi-cycle transfer with (Rate == 6)\n");
    Rate = 6;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
 
    DAV = 1;
    TD = 9'h002;
    @(negedge FRE);
    TD = 9'h000;
    @(negedge FRE);
    TD = 9'h0AA;
    @(negedge FRE);
    TD = 9'h055;
    @(negedge FRE);
    TD = 9'h000;
    DAV = 0;
    @(negedge SS) #1;
    if(SS_Len != 4096) begin
        $display("\tError: SS Length != 4096; SS_Len = %d\n", SS_Len);
        $stop;
    end else begin
        $display("\tPass: SS Length == %d\n", SS_Len);
    end
 
    $display("Testing multi-cycle transfer with (Rate == 7)\n");
    Rate = 7;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
 
    DAV = 1;
    TD = 9'h002;
    @(negedge FRE);
    TD = 9'h000;
    @(negedge FRE);
    TD = 9'h0AA;
    @(negedge FRE);
    TD = 9'h055;
    @(negedge FRE);
    TD = 9'h000;
    DAV = 0;
    @(negedge SS) #1;
    if(SS_Len != 8192) begin
        $display("\tError: SS Length != 8192; SS_Len = %d\n", SS_Len);
        $stop;
    end else begin
        $display("\tPass: SS Length == %d\n", SS_Len);
    end
 
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
    @(posedge Clk) #1;
 
    $stop;
end
 
////////////////////////////////////////////////////////////////////////////////
//
//  Define Clocks
//
 
always #5 Clk = ~Clk;
 
////////////////////////////////////////////////////////////////////////////////
 
always @(negedge SS) SS_Len = i;
 
always @(posedge Clk or negedge SS)
begin
    if(~SS)
        #10 i = 0;
    else
        i = i + 1;
end
 
endmodule

Browse

Tools

Subversion Repositories spicxif

[/] [spicxif/] [trunk/] [Sim/] [tb_SPIxIF.v] - Blame information for rev 2

Line No.	Rev	Author	Line
1	2	MichaelA	`///////////////////////////////////////////////////////////////////////////////`
2			`//`
3			`// Copyright 2008-2013 by Michael A. Morris, dba M. A. Morris & Associates`
4			`//`
5			`// All rights reserved. The source code contained herein is publicly released`
6			`// under the terms and conditions of the GNU Lesser Public License. No part of`
7			`// this source code may be reproduced or transmitted in any form or by any`
8			`// means, electronic or mechanical, including photocopying, recording, or any`
9			`// information storage and retrieval system in violation of the license under`
10			`// which the source code is released.`
11			`//`
12			`// The source code contained herein is free; it may be redistributed and/or`
13			`// modified in accordance with the terms of the GNU Lesser General Public`
14			`// License as published by the Free Software Foundation; either version 2.1 of`
15			`// the GNU Lesser General Public License, or any later version.`
16			`//`
17			`// The source code contained herein is freely released WITHOUT ANY WARRANTY;`
18			`// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A`
19			`// PARTICULAR PURPOSE. (Refer to the GNU Lesser General Public License for`
20			`// more details.)`
21			`//`
22			`// A copy of the GNU Lesser General Public License should have been received`
23			`// along with the source code contained herein; if not, a copy can be obtained`
24			`// by writing to:`
25			`//`
26			`// Free Software Foundation, Inc.`
27			`// 51 Franklin Street, Fifth Floor`
28			`// Boston, MA 02110-1301 USA`
29			`//`
30			`// Further, no use of this source code is permitted in any form or means`
31			`// without inclusion of this banner prominently in any derived works.`
32			`//`
33			`// Michael A. Morris`
34			`// Huntsville, AL`
35			`//`
36			///////////////////////////////////////////////////////////////////////////////`timescale 1ns / 1ps
37
38			`timescale 1ns / 1ps
39
40			`///////////////////////////////////////////////////////////////////////////////`
41			`// Company: M. A. Morris & Associates`
42			`// Engineer: Michael A. Morris`
43			`//`
44			`// Create Date: 07:30:59 03/18/2008`
45			`// Design Name: SPIxIF.v`
46			`// Module Name: tb_SPIx.v`
47			`// Project Name: 4020 HAWK ZAOM Upgrade, 0420-HAWKIF`
48			`// Target Device: XC2S150-5PQ208I`
49			`// Tool versions: ISE 8.2i`
50			`//`
51			`// Description: Testbench for the modified SPIxIF.v module.`
52			`//`
53			`//`
54			`// Verilog Test Fixture created by ISE for module: SPIxIF.v`
55			`//`
56			`// Dependencies: None`
57			`//`
58			`// Revision:`
59			`//`
60			`// 0.01 08C18 MAM File Created`
61			`//`
62			`// 1.00 12I09 MAM Modified to support updated SPIxIF.v module`
63			`//`
64			`// Additional Comments:`
65			`//`
66			`///////////////////////////////////////////////////////////////////////////////`
67
68			`module tb_SPIxIF;`
69
70			`// Inputs`
71			`reg Rst;`
72			`reg Clk;`
73
74			`reg LSB;`
75			`reg [1:0] Mode;`
76			`reg [2:0] Rate;`
77
78			`reg DAV;`
79			`wire FRE;`
80			`reg [8:0] TD;`
81
82			`wire FWE;`
83			`wire [7:0] RD;`
84
85			`wire SSEL;`
86			`wire SCK;`
87			`wire MOSI;`
88			`//wire MISO;`
89
90			`integer i = 0;`
91			`integer SS_Len = 0;`
92
93			`// Instantiate the Unit Under Test (UUT)`
94
95			`SPIxIF uut (`
96			`.Rst(Rst),`
97			`.Clk(Clk),`
98
99			`.LSB(LSB),`
100			`.Mode(Mode),`
101			`.Rate(Rate),`
102
103			`.DAV(DAV),`
104			`.FRE(FRE),`
105			`.TD(TD),`
106
107			`.FWE(FWE),`
108			`.RD(RD),`
109
110			`.SS(SS),`
111			`.SCK(SCK),`
112			`.MOSI(MOSI),`
113			`.MISO(MOSI)`
114			`);`
115
116			`initial begin`
117			`// Initialize Inputs`
118			`Rst = 1;`
119			`Clk = 0;`
120
121			`LSB = 0;`
122			`Mode = 0;`
123			`Rate = 0;`
124
125			`DAV = 0;`
126			`TD = 0;`
127
128			`// Wait 100 ns for global reset to finish`
129
130			`#101 Rst = 0;`
131
132			`// Add stimulus here`
133
134			`$display("Testing: MSB first, all four SPI modes, fastest SPI SCK rate\n");`
135
136			`Mode = 0; Rate = 0; LSB = 0;`
137
138			`$display("\tTest - Mode 0\n");`
139			`#1;`
140			`if(SCK != 0) begin`
141			`$display("\t\tError: SCK did not idle low in Mode 0\n");`
142			`$stop;`
143			`end else begin`
144			`$display("\t\tPass: SCK idled low in Mode 0\n");`
145			`end`
146			`@(posedge Clk) #1;`
147			`DAV = 1; TD = 9'h1AB;`
148			`@(posedge FRE) DAV = 0;`
149			`#1;`
150			`if(SCK != 0) begin`
151			`$display("\t\tError: SCK did not start low in Mode 0\n");`
152			`$stop;`
153			`end else begin`
154			`$display("\t\tPass: SCK started low in Mode 0\n");`
155			`end`
156			`@(negedge FWE) Mode = 1;`
157			`#1;`
158			`if(SCK != 0) begin`
159			`$display("\t\tError: SCK did not idle low in Mode 0\n");`
160			`$stop;`
161			`end else begin`
162			`$display("\t\tPass: SCK idled low in Mode 0\n");`
163			`end`
164			`if(RD != TD[7:0]) begin`
165			`$display("\t\tError: RD not equal to TD\n");`
166			`$stop;`
167			`end else begin`
168			`$display("\t\tPass: RD equal to TD\n");`
169			`end`
170			`if(SS_Len != 16) begin`
171			`$display("\t\tError: SS Length != 16; SCK rate incorrect\n");`
172			`$stop;`
173			`end else begin`
174			`$display("\t\tPass: SS Length == 16; SCK rate correct\n");`
175			`end`
176
177			`@(posedge Clk) #1;`
178			`@(posedge Clk) #1;`
179			`@(posedge Clk) #1;`
180			`@(posedge Clk) #1;`
181
182			`$display("\tTest - Mode 1\n");`
183			`#1;`
184			`if(SCK != 1) begin`
185			`$display("\t\tError: SCK did not idle high in Mode 1\n");`
186			`$stop;`
187			`end else begin`
188			`$display("\t\tPass: SCK idled high in Mode 1\n");`
189			`end`
190			`@(posedge Clk) #1;`
191			`DAV = 1; TD = 9'h15A;`
192			`@(posedge FRE) DAV = 0;`
193			`#1;`
194			`if(SCK != 1) begin`
195			`$display("\t\tError: SCK did not start high in Mode 1\n");`
196			`$stop;`
197			`end else begin`
198			`$display("\t\tPass: SCK started high in Mode 1\n");`
199			`end`
200			`@(negedge FWE) Mode = 2;`
201			`if(SCK != 1) begin`
202			`$display("\t\tError: SCK did not idle high in Mode 1\n");`
203			`$stop;`
204			`end else begin`
205			`$display("\t\tPass: SCK idled high in Mode 1\n");`
206			`end`
207			`if(RD != TD[7:0]) begin`
208			`$display("\t\tError: RD not equal to TD\n");`
209			`$stop;`
210			`end else begin`
211			`$display("\t\tPass: RD equal to TD\n");`
212			`end`
213			`if(SS_Len != 16) begin`
214			`$display("\t\tError: SS Length != 16; SCK rate incorrect\n");`
215			`$stop;`
216			`end else begin`
217			`$display("\t\tPass: SS Length == 16; SCK rate correct\n");`
218			`end`
219
220			`@(posedge Clk) #1;`
221			`@(posedge Clk) #1;`
222			`@(posedge Clk) #1;`
223			`@(posedge Clk) #1;`
224
225			`$display("\tTest - Mode 2\n");`
226			`#1;`
227			`if(SCK != 0) begin`
228			`$display("\t\tError: SCK did not idle low in Mode 2\n");`
229			`$stop;`
230			`end else begin`
231			`$display("\t\tPass: SCK idled low in Mode 2\n");`
232			`end`
233			`@(posedge Clk) #1;`
234			`DAV = 1; TD = 9'h1A5;`
235			`@(posedge FRE) DAV = 0;`
236			`#1;`
237			`if(SCK != 1) begin`
238			`$display("\t\tError: SCK did not start high in Mode 2\n");`
239			`$stop;`
240			`end else begin`
241			`$display("\t\tPass: SCK started high in Mode 2\n");`
242			`end`
243			`@(negedge FWE) Mode = 3;`
244			`if(SCK != 0) begin`
245			`$display("\t\tError: SCK did not idle low in Mode 2\n");`
246			`$stop;`
247			`end else begin`
248			`$display("\t\tPass: SCK idled low in Mode 2\n");`
249			`end`
250			`if(RD != TD[7:0]) begin`
251			`$display("\t\tError: RD not equal to TD\n");`
252			`$stop;`
253			`end else begin`
254			`$display("\t\tPass: RD equal to TD\n");`
255			`end`
256			`if(SS_Len != 16) begin`
257			`$display("\t\tError: SS Length != 16; SCK rate incorrect\n");`
258			`$stop;`
259			`end else begin`
260			`$display("\t\tPass: SS Length == 16; SCK rate correct\n");`
261			`end`
262
263			`@(posedge Clk) #1;`
264			`@(posedge Clk) #1;`
265			`@(posedge Clk) #1;`
266			`@(posedge Clk) #1;`
267
268			`$display("\tTest - Mode 3\n");`
269			`#1;`
270			`if(SCK != 1) begin`
271			`$display("\t\tError: SCK did not idle high in Mode 3\n");`
272			`$stop;`
273			`end else begin`
274			`$display("\t\tPass: SCK idled high in Mode 3\n");`
275			`end`
276			`@(posedge Clk) #1;`
277			`DAV = 1; TD = 9'h169;`
278			`@(posedge FRE) DAV = 0;`
279			`#1;`
280			`if(SCK != 0) begin`
281			`$display("\t\tError: SCK did not start low in Mode 3\n");`
282			`$stop;`
283			`end else begin`
284			`$display("\t\tPass: SCK started low in Mode 3\n");`
285			`end`
286			`@(negedge FWE) Mode = 0;`
287			`if(SCK != 1) begin`
288			`$display("\t\tError: SCK did not idle high in Mode 3\n");`
289			`$stop;`
290			`end else begin`
291			`$display("\t\tPass: SCK idled high in Mode 3\n");`
292			`end`
293			`if(RD != TD[7:0]) begin`
294			`$display("\t\tError: RD not equal to TD\n");`
295			`$stop;`
296			`end else begin`
297			`$display("\t\tPass: RD equal to TD\n");`
298			`end`
299			`if(SS_Len != 16) begin`
300			`$display("\t\tError: SS Length != 16; SCK rate incorrect\n");`
301			`$stop;`
302			`end else begin`
303			`$display("\t\tPass: SS Length == 16; SCK rate correct\n");`
304			`end`
305
306			`$display("Testing multi-cycle transfer\n");`
307			`@(posedge Clk) #1;`
308			`DAV = 1;`
309			`TD = 9'h002;`
310			`@(negedge FRE);`
311			`TD = 9'h000;`
312			`@(negedge FRE);`
313			`TD = 9'h0AA;`
314			`@(negedge FRE);`
315			`TD = 9'h055;`
316			`@(negedge FRE);`
317			`TD = 9'h000;`
318			`DAV = 0;`
319			`@(negedge SS) #1;`
320			`if(SS_Len != 64) begin`
321			`$display("\tError: SS Length != 64; Incorrect number of transfers\n");`
322			`$stop;`
323			`end else begin`
324			`$display("\tPass: SS Length == 64; Correct number of transfers\n");`
325			`end`
326
327			`$display("Testing multi-cycle transfer with (Rate == 1)\n");`
328			`Rate = 1;`
329			`@(posedge Clk) #1;`
330			`@(posedge Clk) #1;`
331			`@(posedge Clk) #1;`
332			`@(posedge Clk) #1;`
333
334			`DAV = 1;`
335			`TD = 9'h002;`
336			`@(negedge FRE);`
337			`TD = 9'h000;`
338			`@(negedge FRE);`
339			`TD = 9'h0AA;`
340			`@(negedge FRE);`
341			`TD = 9'h055;`
342			`@(negedge FRE);`
343			`TD = 9'h000;`
344			`DAV = 0;`
345			`@(negedge SS) #1;`
346			`if(SS_Len != 128) begin`
347			`$display("\tError: SS Length != 128; SS_Len = %d\n", SS_Len);`
348			`$stop;`
349			`end else begin`
350			`$display("\tPass: SS Length == %d\n", SS_Len);`
351			`end`
352
353			`$display("Testing multi-cycle transfer with (Rate == 2)\n");`
354			`Rate = 2;`
355			`@(posedge Clk) #1;`
356			`@(posedge Clk) #1;`
357			`@(posedge Clk) #1;`
358			`@(posedge Clk) #1;`
359
360			`DAV = 1;`
361			`TD = 9'h002;`
362			`@(negedge FRE);`
363			`TD = 9'h000;`
364			`@(negedge FRE);`
365			`TD = 9'h0AA;`
366			`@(negedge FRE);`
367			`TD = 9'h055;`
368			`@(negedge FRE);`
369			`TD = 9'h000;`
370			`DAV = 0;`
371			`@(negedge SS) #1;`
372			`if(SS_Len != 256) begin`
373			`$display("\tError: SS Length != 256; SS_Len = %d\n", SS_Len);`
374			`$stop;`
375			`end else begin`
376			`$display("\tPass: SS Length == %d\n", SS_Len);`
377			`end`
378
379			`$display("Testing multi-cycle transfer with (Rate == 3)\n");`
380			`Rate = 3;`
381			`@(posedge Clk) #1;`
382			`@(posedge Clk) #1;`
383			`@(posedge Clk) #1;`
384			`@(posedge Clk) #1;`
385
386			`DAV = 1;`
387			`TD = 9'h002;`
388			`@(negedge FRE);`
389			`TD = 9'h000;`
390			`@(negedge FRE);`
391			`TD = 9'h0AA;`
392			`@(negedge FRE);`
393			`TD = 9'h055;`
394			`@(negedge FRE);`
395			`TD = 9'h000;`
396			`DAV = 0;`
397			`@(negedge SS) #1;`
398			`if(SS_Len != 512) begin`
399			`$display("\tError: SS Length != 512; SS_Len = %d\n", SS_Len);`
400			`$stop;`
401			`end else begin`
402			`$display("\tPass: SS Length == %d\n", SS_Len);`
403			`end`
404
405			`$display("Testing multi-cycle transfer with (Rate == 4)\n");`
406			`Rate = 4;`
407			`@(posedge Clk) #1;`
408			`@(posedge Clk) #1;`
409			`@(posedge Clk) #1;`
410			`@(posedge Clk) #1;`
411
412			`DAV = 1;`
413			`TD = 9'h002;`
414			`@(negedge FRE);`
415			`TD = 9'h000;`
416			`@(negedge FRE);`
417			`TD = 9'h0AA;`
418			`@(negedge FRE);`
419			`TD = 9'h055;`
420			`@(negedge FRE);`
421			`TD = 9'h000;`
422			`DAV = 0;`
423			`@(negedge SS) #1;`
424			`if(SS_Len != 1024) begin`
425			`$display("\tError: SS Length != 1024; SS_Len = %d\n", SS_Len);`
426			`$stop;`
427			`end else begin`
428			`$display("\tPass: SS Length == %d\n", SS_Len);`
429			`end`
430
431			`$display("Testing multi-cycle transfer with (Rate == 5)\n");`
432			`Rate = 5;`
433			`@(posedge Clk) #1;`
434			`@(posedge Clk) #1;`
435			`@(posedge Clk) #1;`
436			`@(posedge Clk) #1;`
437
438			`DAV = 1;`
439			`TD = 9'h002;`
440			`@(negedge FRE);`
441			`TD = 9'h000;`
442			`@(negedge FRE);`
443			`TD = 9'h0AA;`
444			`@(negedge FRE);`
445			`TD = 9'h055;`
446			`@(negedge FRE);`
447			`TD = 9'h000;`
448			`DAV = 0;`
449			`@(negedge SS) #1;`
450			`if(SS_Len != 2048) begin`
451			`$display("\tError: SS Length != 2048; SS_Len = %d\n", SS_Len);`
452			`$stop;`
453			`end else begin`
454			`$display("\tPass: SS Length == %d\n", SS_Len);`
455			`end`
456
457			`$display("Testing multi-cycle transfer with (Rate == 6)\n");`
458			`Rate = 6;`
459			`@(posedge Clk) #1;`
460			`@(posedge Clk) #1;`
461			`@(posedge Clk) #1;`
462			`@(posedge Clk) #1;`
463
464			`DAV = 1;`
465			`TD = 9'h002;`
466			`@(negedge FRE);`
467			`TD = 9'h000;`
468			`@(negedge FRE);`
469			`TD = 9'h0AA;`
470			`@(negedge FRE);`
471			`TD = 9'h055;`
472			`@(negedge FRE);`
473			`TD = 9'h000;`
474			`DAV = 0;`
475			`@(negedge SS) #1;`
476			`if(SS_Len != 4096) begin`
477			`$display("\tError: SS Length != 4096; SS_Len = %d\n", SS_Len);`
478			`$stop;`
479			`end else begin`
480			`$display("\tPass: SS Length == %d\n", SS_Len);`
481			`end`
482
483			`$display("Testing multi-cycle transfer with (Rate == 7)\n");`
484			`Rate = 7;`
485			`@(posedge Clk) #1;`
486			`@(posedge Clk) #1;`
487			`@(posedge Clk) #1;`
488			`@(posedge Clk) #1;`
489
490			`DAV = 1;`
491			`TD = 9'h002;`
492			`@(negedge FRE);`
493			`TD = 9'h000;`
494			`@(negedge FRE);`
495			`TD = 9'h0AA;`
496			`@(negedge FRE);`
497			`TD = 9'h055;`
498			`@(negedge FRE);`
499			`TD = 9'h000;`
500			`DAV = 0;`
501			`@(negedge SS) #1;`
502			`if(SS_Len != 8192) begin`
503			`$display("\tError: SS Length != 8192; SS_Len = %d\n", SS_Len);`
504			`$stop;`
505			`end else begin`
506			`$display("\tPass: SS Length == %d\n", SS_Len);`
507			`end`
508
509			`@(posedge Clk) #1;`
510			`@(posedge Clk) #1;`
511			`@(posedge Clk) #1;`
512			`@(posedge Clk) #1;`
513
514			`$stop;`
515			`end`
516
517			`////////////////////////////////////////////////////////////////////////////////`
518			`//`
519			`// Define Clocks`
520			`//`
521
522			`always #5 Clk = ~Clk;`
523
524			`////////////////////////////////////////////////////////////////////////////////`
525
526			`always @(negedge SS) SS_Len = i;`
527
528			`always @(posedge Clk or negedge SS)`
529			`begin`
530			`if(~SS)`
531			`#10 i = 0;`
532			`else`
533			`i = i + 1;`
534			`end`
535
536			`endmodule`