Subversion Repositories sport

"../../../../rtl/verilog/sport_top.v" line 321 Connection to input port 'd_i' does not match port size

"../../../../rtl/verilog/sport_top.v" line 322 Connection to input port 'd_i' does not match port size

"../../../../rtl/verilog/sport_top.v" line 322 Connection to output port 'd_o' does not match port size

"../../../../rtl/verilog/sport_top.v" line 400 Connection to input port 'wb_sel_i' does not match port size

"../../../../rtl/verilog/sport_top.v" line 401 Connection to input port 'wb_cti_i' does not match port size

"../../../../rtl/verilog/sport_top.v" line 161: Name conflict (<txFS> and <txfs>, renaming txFS as txfs_rnm0).

"../../../../rtl/verilog/sport_top.v" line 161: Name conflict (<rxFS> and <rxfs>, renaming rxFS as rxfs_rnm0).

Input <dat_i> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.

Input <wb_cti_i> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.

Input <wb_sel_i> is never used. This port will be preserved and left unconnected if it belongs to a top-level block or it belongs to a sub-block and the hierarchy of this sub-block is preserved.

Signal <we_o> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <wb_wr_en> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <wb_rd_en> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <txreg<31:21>> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <stb_o> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <rxreg<31:21>> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <rst_o> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <full> is used but never assigned. This sourceless signal will be automatically connected to value 0.

Signal <cyc_o> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <clk_o> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <ack_o> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <word_out> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <word_in> is used but never assigned. This sourceless signal will be automatically connected to value 00000000000000000000000000000000.

Signal <wei_rd_en> is used but never assigned. This sourceless signal will be automatically connected to value 0.

Signal <wb_wr_en> is used but never assigned. This sourceless signal will be automatically connected to value 0.

Signal <wb_sel_i> is used but never assigned. This sourceless signal will be automatically connected to value 0.

Signal <wb_data_i> is used but never assigned. This sourceless signal will be automatically connected to value 0.

Signal <wb_cti_i> is used but never assigned. This sourceless signal will be automatically connected to value 0.

Signal <txsecEn_tx> is used but never assigned. This sourceless signal will be automatically connected to value 0.

Signal <txsecEn> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <txlateFS_earlyFSn_tx> is used but never assigned. This sourceless signal will be automatically connected to value 0.

Signal <txlateFS_earlyFSn> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <txidle> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <tx_actHi_tx> is never used or assigned. This unconnected signal will be trimmed during the optimization process.

Signal <rxstate> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <rxsecEn_rx> is used but never assigned. This sourceless signal will be automatically connected to value 0.

Signal <rxsecEn> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <rxlateFS_earlyFSn_rx> is used but never assigned. This sourceless signal will be automatically connected to value 0.

Signal <rxlateFS_earlyFSn> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <rxidle> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <rx_actHi_rx> is never used or assigned. This unconnected signal will be trimmed during the optimization process.

Signal <rxSec<31>> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <rxPri<31>> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <rst> is used but never assigned. This sourceless signal will be automatically connected to value 0.

Signal <msbFirst_tx> is never used or assigned. This unconnected signal will be trimmed during the optimization process.

Signal <lock_cfg> is never used or assigned. This unconnected signal will be trimmed during the optimization process.

Signal <fullwrite> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <fullread> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <emptywrite> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <emptyread> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <data_o> is assigned but never used. This unconnected signal will be trimmed during the optimization process.

Signal <data> is never used or assigned. This unconnected signal will be trimmed during the optimization process.

Signal <clk> is used but never assigned. This sourceless signal will be automatically connected to value 0.

HDL ADVISOR - Resource sharing has identified that some arithmetic operations in this design can share the same physical resources for reduced device utilization. For improved clock frequency you may try to disable resource sharing.

Hierarchical block <datafiforead> is unconnected in block <sport_top>.

It will be removed from the design.

The value init of the FF/Latch addr_wr_0 hinder the constant cleaning in the block custom_fifo_dp8.

You should achieve better results by setting this init to 0.

The value init of the FF/Latch addr_rd_0 hinder the constant cleaning in the block custom_fifo_dp8.

You should achieve better results by setting this init to 0.

The value init of the FF/Latch addr_wr_0 hinder the constant cleaning in the block custom_fifo_dp7.

You should achieve better results by setting this init to 0.

The value init of the FF/Latch addr_rd_0 hinder the constant cleaning in the block custom_fifo_dp7.

You should achieve better results by setting this init to 0.

The value init of the FF/Latch addr_wr_0 hinder the constant cleaning in the block custom_fifo_dp6.

You should achieve better results by setting this init to 0.

The value init of the FF/Latch addr_rd_0 hinder the constant cleaning in the block custom_fifo_dp6.

You should achieve better results by setting this init to 0.

The value init of the FF/Latch addr_wr_0 hinder the constant cleaning in the block custom_fifo_dp5.

You should achieve better results by setting this init to 0.

The value init of the FF/Latch addr_rd_0 hinder the constant cleaning in the block custom_fifo_dp5.

You should achieve better results by setting this init to 0.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_5> (without init value) has a constant value of 0 in block <custom_fifo_dp7>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_4> (without init value) has a constant value of 0 in block <custom_fifo_dp7>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_3> (without init value) has a constant value of 0 in block <custom_fifo_dp7>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_2> (without init value) has a constant value of 0 in block <custom_fifo_dp7>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_1> (without init value) has a constant value of 0 in block <custom_fifo_dp7>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_0> (without init value) has a constant value of 0 in block <custom_fifo_dp7>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <addr_rd_1> (without init value) has a constant value of 0 in block <custom_fifo_dp6>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <addr_wr_1> (without init value) has a constant value of 0 in block <custom_fifo_dp6>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_7> (without init value) has a constant value of 0 in block <custom_fifo_dp6>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_6> (without init value) has a constant value of 0 in block <custom_fifo_dp6>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_5> (without init value) has a constant value of 0 in block <custom_fifo_dp6>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_4> (without init value) has a constant value of 0 in block <custom_fifo_dp6>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_3> (without init value) has a constant value of 0 in block <custom_fifo_dp6>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_2> (without init value) has a constant value of 0 in block <custom_fifo_dp6>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[6].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <err> (without init value) has a constant value of 0 in block <wb_interface>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <addr_rd_1> (without init value) has a constant value of 0 in block <custom_fifo_dp8>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <addr_wr_1> (without init value) has a constant value of 0 in block <custom_fifo_dp8>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_7> (without init value) has a constant value of 0 in block <custom_fifo_dp8>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_6> (without init value) has a constant value of 0 in block <custom_fifo_dp8>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_5> (without init value) has a constant value of 0 in block <custom_fifo_dp8>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_4> (without init value) has a constant value of 0 in block <custom_fifo_dp8>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_3> (without init value) has a constant value of 0 in block <custom_fifo_dp8>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_2> (without init value) has a constant value of 0 in block <custom_fifo_dp8>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_1> (without init value) has a constant value of 0 in block <custom_fifo_dp8>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_0> (without init value) has a constant value of 0 in block <custom_fifo_dp8>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[9].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[1].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[0].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <addr_rd_1> (without init value) has a constant value of 0 in block <custom_fifo_dp7>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <addr_wr_1> (without init value) has a constant value of 0 in block <custom_fifo_dp7>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_7> (without init value) has a constant value of 0 in block <custom_fifo_dp7>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <fifo_out_6> (without init value) has a constant value of 0 in block <custom_fifo_dp7>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[5].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[4].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[3].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[2].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_3> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_2> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_1> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_0> (without init value) has a constant value of 0 in block <mem[8].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_7> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_6> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_5> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.

FF/Latch <byte_reg_4> (without init value) has a constant value of 0 in block <mem[7].mem_byte>. This FF/Latch will be trimmed during the optimization process.