OpenCores
URL https://opencores.org/ocsvn/ssbcc/ssbcc/trunk

Subversion Repositories ssbcc

[/] [ssbcc/] [trunk/] [core/] [9x8/] [peripherals/] [UART_Tx.v] - Blame information for rev 11

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 2 sinclairrf 
//
2 
// PERIPHERAL UART_Tx:  @NAME@
3 9 sinclairrf 
// Copyright 2013-2015 Sinclair R.F., Inc.
4 2 sinclairrf 
//
5 
localparam L__OUTFIFO_NBITS = $clog2(@OUTFIFO@);
6 
localparam L__COUNT         = @BAUDMETHOD@-1;
7 
localparam L__COUNT_NBITS   = $clog2(L__COUNT+1);
8 
localparam L__NTX           = 1+8+@NSTOP@-1;
9 
localparam L__NTX_NBITS     = $clog2((L__NTX==0)?1:L__NTX);
10 
generate
11 
reg  [7:0] s__Tx_data;
12 6 sinclairrf 
wire       s__Tx_enabled = @ENABLED@;
13 2 sinclairrf 
reg        s__Tx_go;
14 
reg        s__Tx_uart_busy;
15 
if (@OUTFIFO@ == 0) begin : gen__nooutfifo
16 9 sinclairrf 
  always @ (s__Tx_uart_busy, s__Tx_enabled)
17 6 sinclairrf 
    s__Tx_busy = s__Tx_uart_busy || !s__Tx_enabled;
18 2 sinclairrf 
  always @ (s__Tx)
19 
    s__Tx_data = s__Tx;
20 
  always @ (s__Tx_wr)
21 
    s__Tx_go = s__Tx_wr;
22 
end else begin : gen__outfifo
23 
  reg [7:0] s__Tx_fifo_mem[@OUTFIFO@-1:0];
24 
  reg [L__OUTFIFO_NBITS:0] s__Tx_fifo_addr_in = {(L__OUTFIFO_NBITS+1){1'b0}};
25 
  always @ (posedge i_clk)
26 
    if (i_rst)
27 
      s__Tx_fifo_addr_in <= {(L__OUTFIFO_NBITS+1){1'b0}};
28 
    else if (s__Tx_wr) begin
29 
      s__Tx_fifo_addr_in <= s__Tx_fifo_addr_in + { {(L__OUTFIFO_NBITS){1'b0}}, 1'b1 };
30 
      s__Tx_fifo_mem[s__Tx_fifo_addr_in[0+:L__OUTFIFO_NBITS]] <= s__Tx;
31 
    end else
32 
      s__Tx_fifo_addr_in <= s__Tx_fifo_addr_in;
33 
  reg [L__OUTFIFO_NBITS:0] s__Tx_fifo_addr_out;
34 
  reg s__Tx_fifo_has_data = 1'b0;
35 
  reg s__Tx_fifo_full = 1'b0;
36 
  always @ (posedge i_clk)
37 
    if (i_rst) begin
38 
      s__Tx_fifo_has_data <= 1'b0;
39 
      s__Tx_fifo_full <= 1'b0;
40 
    end else begin
41 
      s__Tx_fifo_has_data <= (s__Tx_fifo_addr_out != s__Tx_fifo_addr_in);
42 
      s__Tx_fifo_full <= (s__Tx_fifo_addr_out == (s__Tx_fifo_addr_in ^ { 1'b1, {(L__OUTFIFO_NBITS){1'b0}} }));
43 
    end
44 
  initial s__Tx_go = 1'b0;
45 
  always @ (posedge i_clk)
46 
    if (i_rst)
47 
      s__Tx_go <= 1'b0;
48 6 sinclairrf 
    else if (s__Tx_enabled && s__Tx_fifo_has_data && !s__Tx_uart_busy && !s__Tx_go)
49 2 sinclairrf 
      s__Tx_go <= 1'b1;
50 
    else
51 
      s__Tx_go <= 1'b0;
52 
  initial s__Tx_fifo_addr_out = {(L__OUTFIFO_NBITS+1){1'b0}};
53 
  always @ (posedge i_clk)
54 
    if (i_rst)
55 
      s__Tx_fifo_addr_out <= {(L__OUTFIFO_NBITS+1){1'b0}};
56 
    else if (s__Tx_go)
57 
      s__Tx_fifo_addr_out <= s__Tx_fifo_addr_out + { {(L__OUTFIFO_NBITS){1'b0}}, 1'b1 };
58 
    else
59 
      s__Tx_fifo_addr_out <= s__Tx_fifo_addr_out;
60 
  initial s__Tx_data = 8'd0;
61 
  always @ (posedge i_clk)
62 
    if (i_rst)
63 
      s__Tx_data <= 8'd0;
64 
    else
65 
      s__Tx_data <= s__Tx_fifo_mem[s__Tx_fifo_addr_out[0+:L__OUTFIFO_NBITS]];
66 
  always @ (s__Tx_fifo_full)
67 
    s__Tx_busy = s__Tx_fifo_full;
68 
end
69 
// Count the clock cycles to decimate to the desired baud rate.
70 
reg [L__COUNT_NBITS-1:0] s__Tx_count = {(L__COUNT_NBITS){1'b0}};
71 
reg s__Tx_count_is_zero = 1'b0;
72 
always @ (posedge i_clk)
73 
  if (i_rst) begin
74 
    s__Tx_count <= {(L__COUNT_NBITS){1'b0}};
75 
    s__Tx_count_is_zero <= 1'b0;
76 
  end else if (s__Tx_go || s__Tx_count_is_zero) begin
77 
    s__Tx_count <= L__COUNT[0+:L__COUNT_NBITS];
78 
    s__Tx_count_is_zero <= 1'b0;
79 
  end else begin
80 
    s__Tx_count <= s__Tx_count - { {(L__COUNT_NBITS-1){1'b0}}, 1'b1 };
81 
    s__Tx_count_is_zero <= (s__Tx_count == { {(L__COUNT_NBITS-1){1'b0}}, 1'b1 });
82 
  end
83 
// Latch the bits to output.
84 
reg [7:0] s__Tx_stream = 8'hFF;
85 
always @ (posedge i_clk)
86 
  if (i_rst)
87 
    s__Tx_stream <= 8'hFF;
88 
  else if (s__Tx_go)
89 
    s__Tx_stream <= s__Tx_data;
90 
  else if (s__Tx_count_is_zero)
91 
    s__Tx_stream <= { 1'b1, s__Tx_stream[1+:7] };
92 
  else
93 
    s__Tx_stream <= s__Tx_stream;
94 
// Generate the output bit stream.
95 
initial @NAME@ = 1'b1;
96 
always @ (posedge i_clk)
97 
  if (i_rst)
98 
    @NAME@ <= 1'b1;
99 
  else if (s__Tx_go)
100 
    @NAME@ <= 1'b0;
101 
  else if (s__Tx_count_is_zero)
102 
    @NAME@ <= s__Tx_stream[0];
103 
  else
104 
    @NAME@ <= @NAME@;
105 
// Count down the number of bits.
106 
reg [L__NTX_NBITS-1:0] s__Tx_n = {(L__NTX_NBITS){1'b0}};
107 
always @ (posedge i_clk)
108 
  if (i_rst)
109 
    s__Tx_n <= {(L__NTX_NBITS){1'b0}};
110 
  else if (s__Tx_go)
111 
    s__Tx_n <= L__NTX[0+:L__NTX_NBITS];
112 
  else if (s__Tx_count_is_zero)
113 
    s__Tx_n <= s__Tx_n - { {(L__NTX_NBITS-1){1'b0}}, 1'b1 };
114 
  else
115 
    s__Tx_n <= s__Tx_n;
116 
// The status bit is 1 if the core is busy and 0 otherwise.
117 
initial s__Tx_uart_busy = 1'b1;
118 
always @ (posedge i_clk)
119 
  if (i_rst)
120 
    s__Tx_uart_busy <= 1'b0;
121 
  else if (s__Tx_go)
122 
    s__Tx_uart_busy <= 1'b1;
123 
  else if (s__Tx_count_is_zero && (s__Tx_n == {(L__NTX_NBITS){1'b0}}))
124 
    s__Tx_uart_busy <= 1'b0;
125 
  else
126 
    s__Tx_uart_busy <= s__Tx_uart_busy;
127 
endgenerate

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.