URL https://opencores.org/ocsvn/ssbcc/ssbcc/trunk

Subversion Repositories ssbcc

[/] [ssbcc/] [trunk/] [example/] [i2c/] [TMP100/] [Xilinx-SP601/] [00README.html] - Blame information for rev 5

Details | Compare with Previous | View Log


<html>
<title>
I2C Temperature Sensor on SP601
</title>
<body>
The SP601 does not have temperature sensors.<br/><br/>
Instead, I used the SP601 and the FMC XM105 daughter board to connect to a
  seperate board with four TMP100s sensors on a 2.5&nbsp;V I2C bus.<br/><br/>
The I2C SCL signal was connected to <tt>FMC_LA19_P</tt> (pin&nbsp;38) and the
  I2C SDA signal was connected to <tt>FMC_LA19_N</tt> (pin&nbsp;40).  These
  signals were echoed to <tt>FMC_LA09_P</tt> (pin&nbsp;37) and
  <tt>FMC_LA09_N</tt> (pin&nbsp;39) respectively for examination by an
  Intronix Logicport logic analyzer.<br/><br/>
The SP601 USB UART was used to transmit the human-readable I2C temperature
  measurements to a console.<br/><br/>
</body>
</html>

Line No.	Rev	Author	Line
1	5	sinclairrf	`<html>`
2			`<title>`
3			`I2C Temperature Sensor on SP601`
4			`</title>`
5			`<body>`
6			`The SP601 does not have temperature sensors.<br/><br/>`
7			`Instead, I used the SP601 and the FMC XM105 daughter board to connect to a`
8			`seperate board with four TMP100s sensors on a 2.5 V I2C bus.<br/><br/>`
9			`The I2C SCL signal was connected to <tt>FMC_LA19_P</tt> (pin 38) and the`
10			`I2C SDA signal was connected to <tt>FMC_LA19_N</tt> (pin 40). These`
11			`signals were echoed to <tt>FMC_LA09_P</tt> (pin 37) and`
12			`<tt>FMC_LA09_N</tt> (pin 39) respectively for examination by an`
13			`Intronix Logicport logic analyzer.<br/><br/>`
14			`The SP601 USB UART was used to transmit the human-readable I2C temperature`
15			`measurements to a console.<br/><br/>`
16			`</body>`
17			`</html>`

Browse

Tools

Subversion Repositories ssbcc

[/] [ssbcc/] [trunk/] [example/] [i2c/] [TMP100/] [Xilinx-SP601/] [00README.html] - Blame information for rev 5