OpenCores
URL https://opencores.org/ocsvn/test_project/test_project/trunk

Subversion Repositories test_project

[/] [test_project/] [trunk/] [linux_sd_driver/] [Documentation/] [hwmon/] [abituguru] - Blame information for rev 62

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 62 marcus.erl
Kernel driver abituguru
2
=======================
3
 
4
Supported chips:
5
  * Abit uGuru revision 1 & 2 (Hardware Monitor part only)
6
    Prefix: 'abituguru'
7
    Addresses scanned: ISA 0x0E0
8
    Datasheet: Not available, this driver is based on reverse engineering.
9
        A "Datasheet" has been written based on the reverse engineering it
10
        should be available in the same dir as this file under the name
11
        abituguru-datasheet.
12
    Note:
13
        The uGuru is a microcontroller with onboard firmware which programs
14
        it to behave as a hwmon IC. There are many different revisions of the
15
        firmware and thus effectivly many different revisions of the uGuru.
16
        Below is an incomplete list with which revisions are used for which
17
        Motherboards:
18
        uGuru 1.00    ~ 1.24    (AI7, KV8-MAX3, AN7) (1)
19
        uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
20
        uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
21
        uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
22
        uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
23
        uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
24
                                 AW9D-MAX) (2)
25
        1) For revisions 2 and 3 uGuru's the driver can autodetect the
26
           sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
27
           this doesnot always work. For these uGuru's the autodection can
28
           be overriden with the bank1_types module param. For all 3 known
29
           revison 1 motherboards the correct use of this param is:
30
           bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
31
           You may also need to specify the fan_sensors option for these boards
32
           fan_sensors=5
33
        2) There is a seperate abituguru3 driver for these motherboards,
34
           the abituguru (without the 3 !) driver will not work on these
35
           motherboards (and visa versa)!
36
 
37
Authors:
38
        Hans de Goede ,
39
        (Initial reverse engineering done by Olle Sandberg
40
         )
41
 
42
 
43
Module Parameters
44
-----------------
45
 
46
* force: bool           Force detection. Note this parameter only causes the
47
                        detection to be skipped, and thus the insmod to
48
                        succeed. If the uGuru can't be read the actual hwmon
49
                        driver will not load and thus no hwmon device will get
50
                        registered.
51
* bank1_types: int[]    Bank1 sensortype autodetection override:
52
                          -1 autodetect (default)
53
 
54
                           1 temp sensor
55
                           2 not connected
56
* fan_sensors: int      Tell the driver how many fan speed sensors there are
57
                        on your motherboard. Default: 0 (autodetect).
58
* pwms: int             Tell the driver how many fan speed controls (fan
59
                        pwms) your motherboard has. Default: 0 (autodetect).
60
* verbose: int          How verbose should the driver be? (0-3):
61
 
62
                           1 + verbose error reporting
63
                           2 + sensors type probing info (default)
64
                           3 + retryable error reporting
65
                        Default: 2 (the driver is still in the testing phase)
66
 
67
Notice if you need any of the first three options above please insmod the
68
driver with verbose set to 3 and mail me  the output of:
69
dmesg | grep abituguru
70
 
71
 
72
Description
73
-----------
74
 
75
This driver supports the hardware monitoring features of the first and
76
second revision of the Abit uGuru chip found on Abit uGuru featuring
77
motherboards (most modern Abit motherboards).
78
 
79
The first and second revision of the uGuru chip in reality is a Winbond
80
W83L950D in disguise (despite Abit claiming it is "a new microprocessor
81
designed by the ABIT Engineers"). Unfortunatly this doesn't help since the
82
W83L950D is a generic microcontroller with a custom Abit application running
83
on it.
84
 
85
Despite Abit not releasing any information regarding the uGuru, Olle
86
Sandberg  has managed to reverse engineer the sensor part
87
of the uGuru. Without his work this driver would not have been possible.
88
 
89
Known Issues
90
------------
91
 
92
The voltage and frequency control parts of the Abit uGuru are not supported.

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.