OpenCores
URL https://opencores.org/ocsvn/test_project/test_project/trunk

Subversion Repositories test_project

[/] [test_project/] [trunk/] [linux_sd_driver/] [Documentation/] [hwmon/] [abituguru3] - Blame information for rev 62

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 62 marcus.erl
Kernel driver abituguru3
2
========================
3
 
4
Supported chips:
5
  * Abit uGuru revision 3 (Hardware Monitor part, reading only)
6
    Prefix: 'abituguru3'
7
    Addresses scanned: ISA 0x0E0
8
    Datasheet: Not available, this driver is based on reverse engineering.
9
    Note:
10
        The uGuru is a microcontroller with onboard firmware which programs
11
        it to behave as a hwmon IC. There are many different revisions of the
12
        firmware and thus effectivly many different revisions of the uGuru.
13
        Below is an incomplete list with which revisions are used for which
14
        Motherboards:
15
        uGuru 1.00    ~ 1.24    (AI7, KV8-MAX3, AN7)
16
        uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
17
        uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
18
        uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
19
        uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
20
                                 AW9D-MAX)
21
        The abituguru3 driver is only for revison 3.0.x.x motherboards,
22
        this driver will not work on older motherboards. For older
23
        motherboards use the abituguru (without the 3 !) driver.
24
 
25
Authors:
26
        Hans de Goede ,
27
        (Initial reverse engineering done by Louis Kruger)
28
 
29
 
30
Module Parameters
31
-----------------
32
 
33
* force: bool           Force detection. Note this parameter only causes the
34
                        detection to be skipped, and thus the insmod to
35
                        succeed. If the uGuru can't be read the actual hwmon
36
                        driver will not load and thus no hwmon device will get
37
                        registered.
38
* verbose: bool         Should the driver be verbose?
39
                        0/off/false  normal output
40
                        1/on/true    + verbose error reporting (default)
41
                        Default: 1 (the driver is still in the testing phase)
42
 
43
Description
44
-----------
45
 
46
This driver supports the hardware monitoring features of the third revision of
47
the Abit uGuru chip, found on recent Abit uGuru featuring motherboards.
48
 
49
The 3rd revision of the uGuru chip in reality is a Winbond W83L951G.
50
Unfortunatly this doesn't help since the W83L951G is a generic microcontroller
51
with a custom Abit application running on it.
52
 
53
Despite Abit not releasing any information regarding the uGuru revision 3,
54
Louis Kruger has managed to reverse engineer the sensor part of the uGuru.
55
Without his work this driver would not have been possible.
56
 
57
Known Issues
58
------------
59
 
60
The voltage and frequency control parts of the Abit uGuru are not supported,
61
neither is writing any of the sensor settings and writing / reading the
62
fanspeed control registers (FanEQ)
63
 
64
If you encounter any problems please mail me  and
65
include the output of: "dmesg | grep abituguru"

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.