| 1 |
62 |
marcus.erl |
Introduction
|
| 2 |
|
|
------------
|
| 3 |
|
|
|
| 4 |
|
|
Most mainboards have sensor chips to monitor system health (like temperatures,
|
| 5 |
|
|
voltages, fans speed). They are often connected through an I2C bus, but some
|
| 6 |
|
|
are also connected directly through the ISA bus.
|
| 7 |
|
|
|
| 8 |
|
|
The kernel drivers make the data from the sensor chips available in the /sys
|
| 9 |
|
|
virtual filesystem. Userspace tools are then used to display the measured
|
| 10 |
|
|
values or configure the chips in a more friendly manner.
|
| 11 |
|
|
|
| 12 |
|
|
Lm-sensors
|
| 13 |
|
|
----------
|
| 14 |
|
|
|
| 15 |
|
|
Core set of utilities that will allow you to obtain health information,
|
| 16 |
|
|
setup monitoring limits etc. You can get them on their homepage
|
| 17 |
|
|
http://www.lm-sensors.nu/ or as a package from your Linux distribution.
|
| 18 |
|
|
|
| 19 |
|
|
If from website:
|
| 20 |
|
|
Get lm-sensors from project web site. Please note, you need only userspace
|
| 21 |
|
|
part, so compile with "make user" and install with "make user_install".
|
| 22 |
|
|
|
| 23 |
|
|
General hints to get things working:
|
| 24 |
|
|
|
| 25 |
|
|
0) get lm-sensors userspace utils
|
| 26 |
|
|
1) compile all drivers in I2C and Hardware Monitoring sections as modules
|
| 27 |
|
|
in your kernel
|
| 28 |
|
|
2) run sensors-detect script, it will tell you what modules you need to load.
|
| 29 |
|
|
3) load them and run "sensors" command, you should see some results.
|
| 30 |
|
|
4) fix sensors.conf, labels, limits, fan divisors
|
| 31 |
|
|
5) if any more problems consult FAQ, or documentation
|
| 32 |
|
|
|
| 33 |
|
|
Other utilities
|
| 34 |
|
|
---------------
|
| 35 |
|
|
|
| 36 |
|
|
If you want some graphical indicators of system health look for applications
|
| 37 |
|
|
like: gkrellm, ksensors, xsensors, wmtemp, wmsensors, wmgtemp, ksysguardd,
|
| 38 |
|
|
hardware-monitor
|
| 39 |
|
|
|
| 40 |
|
|
If you are server administrator you can try snmpd or mrtgutils.
|
