Subversion Repositories test_project

#

# For a description of the syntax of this configuration file,

# see Documentation/kbuild/kconfig-language.txt.

#

# Auxiliary display drivers configuration.

#

menuconfig AUXDISPLAY

        depends on PARPORT

        bool "Auxiliary Display support"

        ---help---

          Say Y here to get to see options for auxiliary display drivers.

          This option alone does not add any kernel code.

          If you say N, all options in this submenu will be skipped and disabled.

if AUXDISPLAY && PARPORT

config KS0108

        tristate "KS0108 LCD Controller"

        depends on PARPORT_PC

        default n

        ---help---

          If you have a LCD controlled by one or more KS0108

          controllers, say Y. You will need also another more specific

          driver for your LCD.

          Depends on Parallel Port support. If you say Y at

          parport, you will be able to compile this as a module (M)

          and built-in as well (Y).

          To compile this as a module, choose M here:

          the module will be called ks0108.

          If unsure, say N.

config KS0108_PORT

        hex "Parallel port where the LCD is connected"

        depends on KS0108

        default 0x378

        ---help---

          The address of the parallel port where the LCD is connected.

          The first  standard parallel port address is 0x378.

          The second standard parallel port address is 0x278.

          The third  standard parallel port address is 0x3BC.

          You can specify a different address if you need.

          If you don't know what I'm talking about, load the parport module,

          and execute "dmesg" or "cat /proc/ioports". You can see there how

          many parallel ports are present and which address each one has.

          Usually you only need to use 0x378.

          If you compile this as a module, you can still override this

          using the module parameters.

config KS0108_DELAY

        int "Delay between each control writing (microseconds)"

        depends on KS0108

        default "2"

        ---help---

          Amount of time the ks0108 should wait between each control write

          to the parallel port.

          If your driver seems to miss random writings, increment this.

          If you don't know what I'm talking about, ignore it.

          If you compile this as a module, you can still override this

          value using the module parameters.

config CFAG12864B

        tristate "CFAG12864B LCD"

        depends on X86

        depends on FB

        depends on KS0108

        select FB_SYS_FILLRECT

        select FB_SYS_COPYAREA

        select FB_SYS_IMAGEBLIT

        select FB_SYS_FOPS

        default n

        ---help---

          If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series,

          say Y. You also need the ks0108 LCD Controller driver.

          For help about how to wire your LCD to the parallel port,

          check Documentation/auxdisplay/cfag12864b

          Depends on the x86 arch and the framebuffer support.

          The LCD framebuffer driver can be attached to a console.

          It will work fine. However, you can't attach it to the fbdev driver

          of the xorg server.

          To compile this as a module, choose M here:

          the modules will be called cfag12864b and cfag12864bfb.

          If unsure, say N.

config CFAG12864B_RATE

       int "Refresh rate (hertz)"

        depends on CFAG12864B

        default "20"

        ---help---

          Refresh rate of the LCD.

          As the LCD is not memory mapped, the driver has to make the work by

          software. This means you should be careful setting this value higher.

          If your CPUs are really slow or you feel the system is slowed down,

          decrease the value.

          Be careful modifying this value to a very high value:

          You can freeze the computer, or the LCD maybe can't draw as fast as you

          are requesting.

          If you don't know what I'm talking about, ignore it.

          If you compile this as a module, you can still override this

          value using the module parameters.

endif # AUXDISPLAY