OpenCores
URL https://opencores.org/ocsvn/test_project/test_project/trunk

Subversion Repositories test_project

[/] [test_project/] [trunk/] [linux_sd_driver/] [drivers/] [char/] [digi1.h] - Blame information for rev 65

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 62 marcus.erl
/*          Definitions for DigiBoard ditty(1) command.                 */
2
 
3
#if !defined(TIOCMODG)
4
#define TIOCMODG        (('d'<<8) | 250)        /* get modem ctrl state */
5
#define TIOCMODS        (('d'<<8) | 251)        /* set modem ctrl state */
6
#endif
7
 
8
#if !defined(TIOCMSET)
9
#define TIOCMSET        (('d'<<8) | 252)        /* set modem ctrl state */
10
#define TIOCMGET        (('d'<<8) | 253)        /* set modem ctrl state */
11
#endif
12
 
13
#if !defined(TIOCMBIC)
14
#define TIOCMBIC        (('d'<<8) | 254)        /* set modem ctrl state */
15
#define TIOCMBIS        (('d'<<8) | 255)        /* set modem ctrl state */
16
#endif
17
 
18
#if !defined(TIOCSDTR)
19
#define TIOCSDTR        (('e'<<8) | 0)          /* set DTR              */
20
#define TIOCCDTR        (('e'<<8) | 1)          /* clear DTR            */
21
#endif
22
 
23
/************************************************************************
24
 * Ioctl command arguments for DIGI parameters.
25
 ************************************************************************/
26
#define DIGI_GETA       (('e'<<8) | 94)         /* Read params          */
27
 
28
#define DIGI_SETA       (('e'<<8) | 95)         /* Set params           */
29
#define DIGI_SETAW      (('e'<<8) | 96)         /* Drain & set params   */
30
#define DIGI_SETAF      (('e'<<8) | 97)         /* Drain, flush & set params */
31
 
32
#define DIGI_GETFLOW    (('e'<<8) | 99)         /* Get startc/stopc flow */
33
                                                /* control characters    */
34
#define DIGI_SETFLOW    (('e'<<8) | 100)        /* Set startc/stopc flow */
35
                                                /* control characters    */
36
#define DIGI_GETAFLOW   (('e'<<8) | 101)        /* Get Aux. startc/stopc */
37
                                                /* flow control chars    */
38
#define DIGI_SETAFLOW   (('e'<<8) | 102)        /* Set Aux. startc/stopc */
39
                                                /* flow control chars    */
40
 
41
#define DIGI_GETINFO    (('e'<<8) | 103)        /* Fill in digi_info */
42
#define DIGI_POLLER     (('e'<<8) | 104)        /* Turn on/off poller */
43
#define DIGI_INIT       (('e'<<8) | 105)        /* Allow things to run. */
44
 
45
struct  digiflow_struct
46
{
47
        unsigned char   startc;                         /* flow cntl start char */
48
        unsigned char   stopc;                          /* flow cntl stop char  */
49
};
50
 
51
typedef struct digiflow_struct digiflow_t;
52
 
53
 
54
/************************************************************************
55
 * Values for digi_flags
56
 ************************************************************************/
57
#define DIGI_IXON       0x0001          /* Handle IXON in the FEP       */
58
#define DIGI_FAST       0x0002          /* Fast baud rates              */
59
#define RTSPACE         0x0004          /* RTS input flow control       */
60
#define CTSPACE         0x0008          /* CTS output flow control      */
61
#define DSRPACE         0x0010          /* DSR output flow control      */
62
#define DCDPACE         0x0020          /* DCD output flow control      */
63
#define DTRPACE         0x0040          /* DTR input flow control       */
64
#define DIGI_FORCEDCD   0x0100          /* Force carrier                */
65
#define DIGI_ALTPIN     0x0200          /* Alternate RJ-45 pin config   */
66
#define DIGI_AIXON      0x0400          /* Aux flow control in fep      */
67
 
68
 
69
/************************************************************************
70
 * Values for digiDload
71
 ************************************************************************/
72
#define NORMAL  0
73
#define PCI_CTL 1
74
 
75
#define SIZE8  0
76
#define SIZE16 1
77
#define SIZE32 2
78
 
79
/************************************************************************
80
 * Structure used with ioctl commands for DIGI parameters.
81
 ************************************************************************/
82
struct digi_struct
83
{
84
        unsigned short  digi_flags;             /* Flags (see above)    */
85
};
86
 
87
typedef struct digi_struct digi_t;
88
 
89
struct digi_info
90
{
91
        unsigned long board;        /* Which board is this ? */
92
        unsigned char status;       /* Alive or dead */
93
        unsigned char type;         /* see epca.h */
94
        unsigned char subtype;      /* For future XEM, XR, etc ... */
95
        unsigned short numports;    /* Number of ports configured */
96
        unsigned char *port;        /* I/O Address */
97
        unsigned char *membase;     /* DPR Address */
98
        unsigned char *version;     /* For future ... */
99
        unsigned short windowData;  /* For future ... */
100
} ;

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.