Subversion Repositories test_project

/*

 * Penmount serial touchscreen driver

 *

 * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>

 *

 * Based on ELO driver (drivers/input/touchscreen/elo.c)

 * Copyright (c) 2004 Vojtech Pavlik

 */

/*

 * This program is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License version 2 as published

 * by the Free Software Foundation.

 */

#include <linux/errno.h>

#include <linux/kernel.h>

#include <linux/module.h>

#include <linux/slab.h>

#include <linux/input.h>

#include <linux/serio.h>

#include <linux/init.h>

#define DRIVER_DESC     "Penmount serial touchscreen driver"

MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");

MODULE_DESCRIPTION(DRIVER_DESC);

MODULE_LICENSE("GPL");

/*

 * Definitions & global arrays.

 */

#define PM_MAX_LENGTH   5

/*

 * Per-touchscreen data.

 */

struct pm {

        struct input_dev *dev;

        struct serio *serio;

        int idx;

        unsigned char data[PM_MAX_LENGTH];

        char phys[32];

};

static irqreturn_t pm_interrupt(struct serio *serio,

                unsigned char data, unsigned int flags)

{

        struct pm *pm = serio_get_drvdata(serio);

        struct input_dev *dev = pm->dev;

        pm->data[pm->idx] = data;

        if (pm->data[0] & 0x80) {

                if (PM_MAX_LENGTH == ++pm->idx) {

                        input_report_abs(dev, ABS_X, pm->data[2] * 128 + pm->data[1]);

                        input_report_abs(dev, ABS_Y, pm->data[4] * 128 + pm->data[3]);

                        input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40));

                        input_sync(dev);

                        pm->idx = 0;

                }

        }

        return IRQ_HANDLED;

}

/*

 * pm_disconnect() is the opposite of pm_connect()

 */

static void pm_disconnect(struct serio *serio)

{

        struct pm *pm = serio_get_drvdata(serio);

        input_get_device(pm->dev);

        input_unregister_device(pm->dev);

        serio_close(serio);

        serio_set_drvdata(serio, NULL);

        input_put_device(pm->dev);

        kfree(pm);

}

/*

 * pm_connect() is the routine that is called when someone adds a

 * new serio device that supports Gunze protocol and registers it as

 * an input device.

 */

static int pm_connect(struct serio *serio, struct serio_driver *drv)

{

        struct pm *pm;

        struct input_dev *input_dev;

        int err;

        pm = kzalloc(sizeof(struct pm), GFP_KERNEL);

        input_dev = input_allocate_device();

        if (!pm || !input_dev) {

                err = -ENOMEM;

                goto fail1;

        }

        pm->serio = serio;

        pm->dev = input_dev;

        snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys);

        input_dev->name = "Penmount Serial TouchScreen";

        input_dev->phys = pm->phys;

        input_dev->id.bustype = BUS_RS232;

        input_dev->id.vendor = SERIO_PENMOUNT;

        input_dev->id.product = 0;

        input_dev->id.version = 0x0100;

        input_dev->dev.parent = &serio->dev;

        input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);

        input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);

        input_set_abs_params(pm->dev, ABS_X, 0, 0x3ff, 0, 0);

        input_set_abs_params(pm->dev, ABS_Y, 0, 0x3ff, 0, 0);

        serio_set_drvdata(serio, pm);

        err = serio_open(serio, drv);

        if (err)

                goto fail2;

        err = input_register_device(pm->dev);

        if (err)

                goto fail3;

        return 0;

 fail3: serio_close(serio);

 fail2: serio_set_drvdata(serio, NULL);

 fail1: input_free_device(input_dev);

        kfree(pm);

        return err;

}

/*

 * The serio driver structure.

 */

static struct serio_device_id pm_serio_ids[] = {

        {

                .type   = SERIO_RS232,

                .proto  = SERIO_PENMOUNT,

                .id     = SERIO_ANY,

                .extra  = SERIO_ANY,

        },

        { 0 }

};

MODULE_DEVICE_TABLE(serio, pm_serio_ids);

static struct serio_driver pm_drv = {

        .driver         = {

                .name   = "penmountlpc",

        },

        .description    = DRIVER_DESC,

        .id_table       = pm_serio_ids,

        .interrupt      = pm_interrupt,

        .connect        = pm_connect,

        .disconnect     = pm_disconnect,

};

/*

 * The functions for inserting/removing us as a module.

 */

static int __init pm_init(void)

{

        return serio_register_driver(&pm_drv);

}

static void __exit pm_exit(void)

{

        serio_unregister_driver(&pm_drv);

}

module_init(pm_init);

module_exit(pm_exit);