OpenCores
URL https://opencores.org/ocsvn/test_project/test_project/trunk

Subversion Repositories test_project

[/] [test_project/] [trunk/] [linux_sd_driver/] [drivers/] [media/] [video/] [se401.h] - Blame information for rev 78

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 62 marcus.erl
 
2
#ifndef __LINUX_se401_H
3
#define __LINUX_se401_H
4
 
5
#include <asm/uaccess.h>
6
#include <linux/videodev.h>
7
#include <media/v4l2-common.h>
8
#include <linux/mutex.h>
9
 
10
#define se401_DEBUG     /* Turn on debug messages */
11
 
12
#ifdef se401_DEBUG
13
#  define PDEBUG(level, fmt, args...) \
14
if (debug >= level) info("[" __PRETTY_FUNCTION__ ":%d] " fmt, __LINE__ , ## args)
15
#else
16
#  define PDEBUG(level, fmt, args...) do {} while(0)
17
#endif
18
 
19
/* An almost drop-in replacement for sleep_on_interruptible */
20
#define wait_interruptible(test, queue, wait) \
21
{ \
22
        add_wait_queue(queue, wait); \
23
        set_current_state(TASK_INTERRUPTIBLE); \
24
        if (test) \
25
                schedule(); \
26
        remove_wait_queue(queue, wait); \
27
        set_current_state(TASK_RUNNING); \
28
        if (signal_pending(current)) \
29
                break; \
30
}
31
 
32
#define SE401_REQ_GET_CAMERA_DESCRIPTOR         0x06
33
#define SE401_REQ_START_CONTINUOUS_CAPTURE      0x41
34
#define SE401_REQ_STOP_CONTINUOUS_CAPTURE       0x42
35
#define SE401_REQ_CAPTURE_FRAME                 0x43
36
#define SE401_REQ_GET_BRT                       0x44
37
#define SE401_REQ_SET_BRT                       0x45
38
#define SE401_REQ_GET_WIDTH                     0x4c
39
#define SE401_REQ_SET_WIDTH                     0x4d
40
#define SE401_REQ_GET_HEIGHT                    0x4e
41
#define SE401_REQ_SET_HEIGHT                    0x4f
42
#define SE401_REQ_GET_OUTPUT_MODE               0x50
43
#define SE401_REQ_SET_OUTPUT_MODE               0x51
44
#define SE401_REQ_GET_EXT_FEATURE               0x52
45
#define SE401_REQ_SET_EXT_FEATURE               0x53
46
#define SE401_REQ_CAMERA_POWER                  0x56
47
#define SE401_REQ_LED_CONTROL                   0x57
48
#define SE401_REQ_BIOS                          0xff
49
 
50
#define SE401_BIOS_READ                         0x07
51
 
52
#define SE401_FORMAT_BAYER      0x40
53
 
54
/* Hyundai hv7131b registers
55
   7121 and 7141 should be the same (haven't really checked...) */
56
/* Mode registers: */
57
#define HV7131_REG_MODE_A               0x00
58
#define HV7131_REG_MODE_B               0x01
59
#define HV7131_REG_MODE_C               0x02
60
/* Frame registers: */
61
#define HV7131_REG_FRSU         0x10
62
#define HV7131_REG_FRSL         0x11
63
#define HV7131_REG_FCSU         0x12
64
#define HV7131_REG_FCSL         0x13
65
#define HV7131_REG_FWHU         0x14
66
#define HV7131_REG_FWHL         0x15
67
#define HV7131_REG_FWWU         0x16
68
#define HV7131_REG_FWWL         0x17
69
/* Timing registers: */
70
#define HV7131_REG_THBU         0x20
71
#define HV7131_REG_THBL         0x21
72
#define HV7131_REG_TVBU         0x22
73
#define HV7131_REG_TVBL         0x23
74
#define HV7131_REG_TITU         0x25
75
#define HV7131_REG_TITM         0x26
76
#define HV7131_REG_TITL         0x27
77
#define HV7131_REG_TMCD         0x28
78
/* Adjust Registers: */
79
#define HV7131_REG_ARLV         0x30
80
#define HV7131_REG_ARCG         0x31
81
#define HV7131_REG_AGCG         0x32
82
#define HV7131_REG_ABCG         0x33
83
#define HV7131_REG_APBV         0x34
84
#define HV7131_REG_ASLP         0x54
85
/* Offset Registers: */
86
#define HV7131_REG_OFSR         0x50
87
#define HV7131_REG_OFSG         0x51
88
#define HV7131_REG_OFSB         0x52
89
/* REset level statistics registers: */
90
#define HV7131_REG_LOREFNOH     0x57
91
#define HV7131_REG_LOREFNOL     0x58
92
#define HV7131_REG_HIREFNOH     0x59
93
#define HV7131_REG_HIREFNOL     0x5a
94
 
95
/* se401 registers */
96
#define SE401_OPERATINGMODE     0x2000
97
 
98
 
99
/* size of usb transfers */
100
#define SE401_PACKETSIZE        4096
101
/* number of queued bulk transfers to use, should be about 8 */
102
#define SE401_NUMSBUF           1
103
/* read the usb specs for this one :) */
104
#define SE401_VIDEO_ENDPOINT    1
105
#define SE401_BUTTON_ENDPOINT   2
106
/* number of frames supported by the v4l part */
107
#define SE401_NUMFRAMES         2
108
/* scratch buffers for passing data to the decoders */
109
#define SE401_NUMSCRATCH        32
110
/* maximum amount of data in a JangGu packet */
111
#define SE401_VLCDATALEN        1024
112
/* number of nul sized packets to receive before kicking the camera */
113
#define SE401_MAX_NULLPACKETS   4000
114
/* number of decoding errors before kicking the camera */
115
#define SE401_MAX_ERRORS        200
116
 
117
struct usb_device;
118
 
119
struct se401_sbuf {
120
        unsigned char *data;
121
};
122
 
123
enum {
124
        FRAME_UNUSED,           /* Unused (no MCAPTURE) */
125
        FRAME_READY,            /* Ready to start grabbing */
126
        FRAME_GRABBING,         /* In the process of being grabbed into */
127
        FRAME_DONE,             /* Finished grabbing, but not been synced yet */
128
        FRAME_ERROR,            /* Something bad happened while processing */
129
};
130
 
131
enum {
132
        FMT_BAYER,
133
        FMT_JANGGU,
134
};
135
 
136
enum {
137
        BUFFER_UNUSED,
138
        BUFFER_READY,
139
        BUFFER_BUSY,
140
        BUFFER_DONE,
141
};
142
 
143
struct se401_scratch {
144
        unsigned char *data;
145
        volatile int state;
146
        int offset;
147
        int length;
148
};
149
 
150
struct se401_frame {
151
        unsigned char *data;            /* Frame buffer */
152
 
153
        volatile int grabstate; /* State of grabbing */
154
 
155
        unsigned char *curline;
156
        int curlinepix;
157
        int curpix;
158
};
159
 
160
struct usb_se401 {
161
        struct video_device vdev;
162
 
163
        /* Device structure */
164
        struct usb_device *dev;
165
 
166
        unsigned char iface;
167
 
168
        char *camera_name;
169
 
170
        int change;
171
        int brightness;
172
        int hue;
173
        int rgain;
174
        int ggain;
175
        int bgain;
176
        int expose_h;
177
        int expose_m;
178
        int expose_l;
179
        int resetlevel;
180
 
181
        int enhance;
182
 
183
        int format;
184
        int sizes;
185
        int *width;
186
        int *height;
187
        int cwidth;             /* current width */
188
        int cheight;            /* current height */
189
        int palette;
190
        int maxframesize;
191
        int cframesize;         /* current framesize */
192
 
193
        struct mutex lock;
194
        int user;               /* user count for exclusive use */
195
        int removed;            /* device disconnected */
196
 
197
        int streaming;          /* Are we streaming video? */
198
 
199
        char *fbuf;             /* Videodev buffer area */
200
 
201
        struct urb *urb[SE401_NUMSBUF];
202
        struct urb *inturb;
203
 
204
        int button;
205
        int buttonpressed;
206
 
207
        int curframe;           /* Current receiving frame */
208
        struct se401_frame frame[SE401_NUMFRAMES];
209
        int readcount;
210
        int framecount;
211
        int error;
212
        int dropped;
213
 
214
        int scratch_next;
215
        int scratch_use;
216
        int scratch_overflow;
217
        struct se401_scratch scratch[SE401_NUMSCRATCH];
218
 
219
        /* Decoder specific data: */
220
        unsigned char vlcdata[SE401_VLCDATALEN];
221
        int vlcdatapos;
222
        int bayeroffset;
223
 
224
        struct se401_sbuf sbuf[SE401_NUMSBUF];
225
 
226
        wait_queue_head_t wq;   /* Processes waiting */
227
 
228
        int nullpackets;
229
};
230
 
231
 
232
 
233
#endif
234
 

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.