OpenCores
URL https://opencores.org/ocsvn/test_project/test_project/trunk

Subversion Repositories test_project

[/] [test_project/] [trunk/] [linux_sd_driver/] [drivers/] [net/] [irda/] [old_belkin-sir.c] - Blame information for rev 62

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 62 marcus.erl
/*********************************************************************
2
 *
3
 * Filename:      old_belkin.c
4
 * Version:       1.1
5
 * Description:   Driver for the Belkin (old) SmartBeam dongle
6
 * Status:        Experimental...
7
 * Author:        Jean Tourrilhes <jt@hpl.hp.com>
8
 * Created at:    22/11/99
9
 * Modified at:   Fri Dec 17 09:13:32 1999
10
 * Modified by:   Dag Brattli <dagb@cs.uit.no>
11
 *
12
 *     Copyright (c) 1999 Jean Tourrilhes, All Rights Reserved.
13
 *
14
 *     This program is free software; you can redistribute it and/or
15
 *     modify it under the terms of the GNU General Public License as
16
 *     published by the Free Software Foundation; either version 2 of
17
 *     the License, or (at your option) any later version.
18
 *
19
 *     This program is distributed in the hope that it will be useful,
20
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
21
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22
 *     GNU General Public License for more details.
23
 *
24
 *     You should have received a copy of the GNU General Public License
25
 *     along with this program; if not, write to the Free Software
26
 *     Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27
 *     MA 02111-1307 USA
28
 *
29
 ********************************************************************/
30
 
31
#include <linux/module.h>
32
#include <linux/delay.h>
33
#include <linux/init.h>
34
 
35
#include <net/irda/irda.h>
36
// #include <net/irda/irda_device.h>
37
 
38
#include "sir-dev.h"
39
 
40
/*
41
 * Belkin is selling a dongle called the SmartBeam.
42
 * In fact, there is two hardware version of this dongle, of course with
43
 * the same name and looking the exactly same (grrr...).
44
 * I guess that I've got the old one, because inside I don't have
45
 * a jumper for IrDA/ASK...
46
 *
47
 * As far as I can make it from info on their web site, the old dongle
48
 * support only 9600 b/s, which make our life much simpler as far as
49
 * the driver is concerned, but you might not like it very much ;-)
50
 * The new SmartBeam does 115 kb/s, and I've not tested it...
51
 *
52
 * Belkin claim that the correct driver for the old dongle (in Windows)
53
 * is the generic Parallax 9500a driver, but the Linux LiteLink driver
54
 * fails for me (probably because Linux-IrDA doesn't rate fallback),
55
 * so I created this really dumb driver...
56
 *
57
 * In fact, this driver doesn't do much. The only thing it does is to
58
 * prevent Linux-IrDA to use any other speed than 9600 b/s ;-) This
59
 * driver is called "old_belkin" so that when the new SmartBeam is supported
60
 * its driver can be called "belkin" instead of "new_belkin".
61
 *
62
 * Note : this driver was written without any info/help from Belkin,
63
 * so a lot of info here might be totally wrong. Blame me ;-)
64
 */
65
 
66
static int old_belkin_open(struct sir_dev *dev);
67
static int old_belkin_close(struct sir_dev *dev);
68
static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed);
69
static int old_belkin_reset(struct sir_dev *dev);
70
 
71
static struct dongle_driver old_belkin = {
72
        .owner          = THIS_MODULE,
73
        .driver_name    = "Old Belkin SmartBeam",
74
        .type           = IRDA_OLD_BELKIN_DONGLE,
75
        .open           = old_belkin_open,
76
        .close          = old_belkin_close,
77
        .reset          = old_belkin_reset,
78
        .set_speed      = old_belkin_change_speed,
79
};
80
 
81
static int __init old_belkin_sir_init(void)
82
{
83
        return irda_register_dongle(&old_belkin);
84
}
85
 
86
static void __exit old_belkin_sir_cleanup(void)
87
{
88
        irda_unregister_dongle(&old_belkin);
89
}
90
 
91
static int old_belkin_open(struct sir_dev *dev)
92
{
93
        struct qos_info *qos = &dev->qos;
94
 
95
        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
96
 
97
        /* Power on dongle */
98
        sirdev_set_dtr_rts(dev, TRUE, TRUE);
99
 
100
        /* Not too fast, please... */
101
        qos->baud_rate.bits &= IR_9600;
102
        /* Needs at least 10 ms (totally wild guess, can do probably better) */
103
        qos->min_turn_time.bits = 0x01;
104
        irda_qos_bits_to_value(qos);
105
 
106
        /* irda thread waits 50 msec for power settling */
107
 
108
        return 0;
109
}
110
 
111
static int old_belkin_close(struct sir_dev *dev)
112
{
113
        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
114
 
115
        /* Power off dongle */
116
        sirdev_set_dtr_rts(dev, FALSE, FALSE);
117
 
118
        return 0;
119
}
120
 
121
/*
122
 * Function old_belkin_change_speed (task)
123
 *
124
 *    With only one speed available, not much to do...
125
 */
126
static int old_belkin_change_speed(struct sir_dev *dev, unsigned speed)
127
{
128
        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
129
 
130
        dev->speed = 9600;
131
        return (speed==dev->speed) ? 0 : -EINVAL;
132
}
133
 
134
/*
135
 * Function old_belkin_reset (task)
136
 *
137
 *      Reset the Old-Belkin type dongle.
138
 *
139
 */
140
static int old_belkin_reset(struct sir_dev *dev)
141
{
142
        IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
143
 
144
        /* This dongles speed "defaults" to 9600 bps ;-) */
145
        dev->speed = 9600;
146
 
147
        return 0;
148
}
149
 
150
MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>");
151
MODULE_DESCRIPTION("Belkin (old) SmartBeam dongle driver");
152
MODULE_LICENSE("GPL");
153
MODULE_ALIAS("irda-dongle-7"); /* IRDA_OLD_BELKIN_DONGLE */
154
 
155
module_init(old_belkin_sir_init);
156
module_exit(old_belkin_sir_cleanup);

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.